Surface Tension of the 4-Methyl-2-Pentanone/Ethyl Benzoate Binary System in the Temperature Range from 278.15 to 308.15K

Surface tensions (σ) and densities (ρ) of 4-methyl-2-pentanone/ethyl benzoate binary mixtures have been measured over the entire composition range at 278.15, 288.15, 298.15, and 308.15 K. Values of the excess surface tensions (σ^E) and excess molar volumes (V^E) have been calculated. The σ^E and V^E values were fitted by to the Redlich–Kister polynomial equation and the A_k coefficients have been derived. The standard deviations between the calculated and the experimental excess properties have also been derived. The surface tension values have been further used to calculate the surface entropies (S^S) and surface enthalpies (H^S) per unit surface area. The lyophobicity (β) and the surface mole fractions (x₁^S) of the surfactant 4-methyl-2-pentanone have been derived using the extended Langmuir model. The obtained results are discussed from the viewpoint of the existence of specific interactions between unlike molecules in the bulk region and the surface.     

Polyurethane cationomers synthesised with 4,4′-methylenebis(phenyl isocyanate), polyoxyethylene glycol and <Emphasis Type="Italic">N</Emphasis>-methyl diethanolamine

Polyurethane cationomers with increased contents of ions were synthesised in the reaction of 4,4′-methylenebis(phenyl isocyanate) (MDI) with polyoxypropylene glycol (M = 450) and N-methyl diethanolamine (N-MDA). Amine segments were built-in to the urethane–isocyanate prepolymer in the reaction with formic acid and then they were converted to alkyl-ammonium cations. The obtained isocyanate prepolymers were then extended in the aqueous medium with the use of 1,6-hexamethylenediamine. That yielded stable aqueous dispersions, which were applied on the surfaces of test poly(tetrafluoroethylene) samples. After evaporation of water, the dispersions formed thin polymer coatings. ¹H and ¹³C NMR spectral methods were employed to confirm chemical structures of synthesised cationomers and to modify their quantitative composition in relation to that assumed on the basis of the stoichiometry of the reactions, which were conducted on successive stages of the polyaddition process. Furthermore, the GPC method was used to learn the sizes and distributions of mean molecular weights of those cationomers. Based on ¹H NMR spectra, the factor κ was calculated which represented the polarity level of the obtained cationomers. Good correlation was found between that factor and the free surface energy γ _S (increasing in the range 38–42 mJ/m²) as well as its polar and acid-base components, as determined from the van Oss–Good model on the basis of measured wetting angles between the coatings and model liquids with various polarities. The values of κ and γ _S parameters resulted principally from the increasing amounts of cations NH⁺, which were evaluated on the basis of the concentrations of tertiary nitrogen atoms increasing within 1.37–2.66 wt%. Those concentrations and amounts resulted, in turn, from the amounts of amine N-MDA which could be built into cationomers. The effects were discussed of chemical structures and polarity specifications of polyurethane cationomers on the viscosities of produced aqueous dispersions and on the sizes of their colloidal particles, on the values of free surface energy and on its polar and acid-base components, and on the glass transition temperatures T _g2 of the rigid segments as found by the differential scanning calorimetry (DSC) method.     

Natural bond orbital analysis of some para-substituted N-nitrosoacetanilide biological molecules

Theoretical study of several para-substituted N-nitrosoacetanilide biological molecules has been performed using density functional B3LYP method with 6-31G(d,p) basis set. Geometries obtained from DFT calculation were used to perform natural bond orbital analysis. The p characters of two nitrogen natural hybrid orbital (NHO) σ _N3–N2 bond orbitals increase with increasing σ _p values of the para substituent group on the benzene, which results in a lengthening of the N₃–N₂ bond. The p characters of oxygen NHO σ _O1–N2 and nitrogen NHO σ _O1–N2 bond orbitals decrease with increasing σ _p values of the para substituent group on the benzene, which results in a shortening of the N₂=O₁ bond. It is also noted that decreased occupancy of the localized σ _N3–N2 orbital in the idealized Lewis structure, or increased occupancy of s_N3-N2^* \sigma_{\rm N3-N2}^{\ast} of the non-Lewis orbital, and their subsequent impact on molecular stability and geometry (bond lengths) are also related with the resulting p character of the corresponding nitrogen NHO of σ _N3–N2 bond orbital.     

Surface properties of cellulose modified by imidazolidinone

The influence of the modification of cellulose fibres by the imidazolidinone derivative 1,3-dimethyl-4,5-dihydroxyethylene urea (DMeDHEU) on fibre surface free energy and electrochemical potential was studied. The presence of DMeDHEU in the cellulose structure was confirmed by infrared spectral analysis. The surface free energy of untreated and treated cellulose fibres was determined from the results of thin-layer wicking, where the rate of liquid penetration into the cellulose fabric was measured. Using the van Oss-Chaudhury-Good theoretical approach, apolar, γ _S ^LW , polar electron-acceptor, γ _S ⁺, and electron-donor, γ _S ⁻, components of the surface free energy were calculated. The electrokinetic potential was determined from the results of steaming potential measurements. The results revealed that the incorporation of DMeDHEU into the cellulose structure lead to a decrease in the value of γ _S ⁻, whereas the values of γ _S ^LW and γ _S ⁺ remained almost unchanged. Despite their decreased γ _S ⁻ value, the treated cellulose fibres still represent a monopolar solid with a strongly expressed electron-donor component. The values of ΔG _iw and ΔG _iwi suggested that both untreated and treated cellulose samples could be considered hydrophilic substrates. The results of the electrokinetic potential measurements showed that the consumption of cellulose hydroxyl groups in the crosslinking reaction with DMeDHEU did not decrease the electrokinetic properties of the cellulose surface.     

On the origin of Baeyer strain in molecules – an ab initio and DFT analysis

It is shown that destabilization energy of organic molecules containing small rings can be estimated by quasi–homodesmotic reactions involving acyclic “strain–free” counterparts. These destabilization energies E_s can be well reproduced at the HF level employing cc-pVTZ basis set, because the contributions of the electron correlation and ZPV energy practically cancel each other in most cases. A predominating factor leading to a decreased stability of molecules involving small ring fragments is given by the Ω bond bending or Baeyer strain. It leads to a dramatic decrease in the electron–nuclei attraction, which is a hallmark of the angular strain. Similar results are obtained by the DFT–B3LYP method. It is strongly pointed out that Baeyer strain cannot be singled out from the total destabilization energy in a precise quantitative way, since it is interlocked with other types of intramolecular interactions like the nonbonded repulsions, a significant increase in the stability of the CH bonds emanating from the small cyclic structures and by the σ–aromaticity or σ–antiaromaticity in three– and four–membered rings, respectively. Nevertheless, it is fair to say that Baeyer strain is the essential factor in determining decreased stability of small ring compounds and that the diminished electron–nuclear attraction is its characteristic signature at the global level. Dedicated to Professor Karl Jug on the occasion of his 65th birthday.     

Thermal stability and crystallization kinetics in superionic glasses using electrical conductivity–temperature cycles

The present work demonstrates application of electrical conductivity (σ)–temperature (T) cycles to investigate thermal properties viz., crystallization and glass transition kinetics in AgI–Ag₂O–V₂O₅–MoO₃ superionic glasses. The σ–T cycles are carefully performed at various heating rates, viz., 0.5, 1, 3, 5, and 7 K/min. The conductivity in Ag⁺ ion conducting glasses exhibit anomalous deviation from Arrhenius behavior near glass transition temperature (T _g) followed by a drastic fall at crystallization (T _c). The temperature corresponding to maximum rate of crystallization (T _p) is obtained from the derivative of σ–1/T plots. With increasing heating rates, the characteristic temperatures (T _g, T _p) are found to be shifting monotonically toward higher temperatures. Thus, activation energy of structural relaxation E _s, crystallization E _c and other thermal stability parameters have been obtained from σ–T cycles using Kissinger equation and Moynihan formulation. For a comparative study, these kinetics parameters have also been calculated from differential scanning calorimetry plots. The parameters obtained from both the methods are found to be comparable within experimental error.     

Mechanism of the Reaction of Picryl Iodide with 4-[4-(Dimethylamino)styryl]pyridine

We have used semiempirical calculations (PM3, MNDOd) to show that the parabolic dependence of the rate constants (k_obs, s⁻¹) on the picryl iodide (PicI) concentration in the reaction of quaternization of 4-[4-(dimethylamino)styryl]pyridine (DASP) in acetonitrile is due to formation of an inactive σ_1,3 adduct from DASP and PicI. Formation of the σ_1,1 adduct is the rate-limiting step of the S_NAr substitution. __________ Translated from Teoreticheskaya i Eksperimental'naya Khimiya, Vol. 41, No. 4, pp. 242–246, July–August, 2005.     

Surface morphology of polypyrrole core/polyacrolein shell latex by atomic force microscopy (AFM)

 Polypyrrole latex (P(P)), synthesized in Redox polymerization of pyrrole, was used as seed for radical polymerization of acrolein initiated with K₂S₂O₈. In this process the polypyrrole core/polyacrolein shell latex (P(P–A)) was obtained. Morphology of the surface of P(P–A) particles was investigated by atomic force microscopy (AFM). It was found that macromolecules of polyacrolein are not randomly distributed on the surface of polypyrrole but form patches. Apparently, attraction between macromolecules of poly-acrolein in the surface layer is high and the enthalpy of formation of polyacrolein macromolecule clusters is sufficient to compensate, at least, the negative entropy change due to ordering of these macromolecules. Thickness of the polyacrolein layer on the surface of polypyrrole particles, which were covered only partially with polyacrolein, was equal to only 1.6 nm (standard deviation σ= 0.2 nm) and thus, it was reasonable to assume that it corresponded to the monolayer coverage. Received: 30 April 1997 Accepted: 25 August 1997     

Study of the optimal condition for electroplating of Bi2S3 thin films and their photoelectrochemical characteristics

Bismuth sulfide (Bi₂S₃) thin films were electrodeposited from non-aqueous dimethyl sulfoxide medium containing Bi(NO₃)₃ and thiourea as the precursor salts, triethanol amine as the complexing agent, and TritonX-100 as the surface active agent. The prepared films were subjected to rigorous experimentation in order to validate their potential candidature for solar cells. The films exhibited band gap energy of ∼1.3 eV and resistivity of the order of 2 × 10⁶ Ω cm at room temperature as was obtained from UV–Vis spectroscopy and four-probe measurements, respectively. Scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and energy dispersive analysis of X-ray were employed to reveal the morphology, structure, and chemical composition of the film matrix. The Bi₂S₃ films were found to be non-decomposable up to the temperature of 1,000 °C with the help of thermogravimetry–differential thermal analysis. The Nyquist and Mott–Schottky plots derived from electrochemical impedance spectroscopy measurements provided important information regarding electrical and semiconducting properties of the films. The n-type film with a donor density of the order of ∼10²³ m⁻³ displayed reasonable photoactivity under illumination and is recommended as a promising candidate for potential photoelectrochemical applications.     

Ionization potentials of non-metal monosulfides. Conjugation in radical cations containing Group IV elements

The first vertical ionization potentialsI(n_s) of 69 monosulfides XSY (X, Y=H, Hal, organic, or heteroorganic substituent) are related to the inductive σ_I resonance (σ _R ⁺ ) and polarizability (σ_α) constants of the substituents by dependences of theI(n_S)=a+bΣσ_I+bΣσ_R+bΣσ_α type. TheI(n_s) values are also affected by hyperconjugation which increases on going from XSH to XSY (Y≠H) compounds. The first calculations of the σ _R ⁺ parameters characterizing the conjugation of Si-, Ge-, Sn-, and Pb-containing substituents with the S^.+ radical cation center are reported. The reasons for weakening of resonance donor properties of heteroorganic substituents of the +M-type in the systems studied as compared to those of the same substituents in the corresponding aromatic radical cations are considered. Translated fromIzvestiya Akademii Nauk. Seriya Khmicheskaya, No. 1, pp. 25–31, January, 2000.     

Ionization potentials of non-metal monosulfides. Conjugation in radical cations containing Group IV elements

The first vertical ionization potentialsI(n_s) of 69 monosulfides XSY (X, Y=H, Hal, organic, or heteroorganic substituent) are related to the inductive σ_I resonance (σ _R ⁺ ) and polarizability (σ_α) constants of the substituents by dependences of theI(n_S)=a+bΣσ_I+bΣσ_R+bΣσ_α type. TheI(n_s) values are also affected by hyperconjugation which increases on going from XSH to XSY (Y≠H) compounds. The first calculations of the σ _R ⁺ parameters characterizing the conjugation of Si-, Ge-, Sn-, and Pb-containing substituents with the S^.+ radical cation center are reported. The reasons for weakening of resonance donor properties of heteroorganic substituents of the +M-type in the systems studied as compared to those of the same substituents in the corresponding aromatic radical cations are considered. Translated fromIzvestiya Akademii Nauk. Seriya Khmicheskaya, No. 1, pp. 25–31, January, 2000.     

Vacancy Contents in MnZn Ferrites From TG Curves

Expressions for calculating the cation vacancy contents of MnZn ferrites from thermogravimetric curves are presented together with some experimental data. In a single-phase MnZn ferrite synthesized by conventional ceramic procedures, the O₂ evolution accompanying ferrite formation follows the formal equation. Mn²⁺ _σα Zn_σβ Fe³⁺ _2σ(1–γ) [V ]_{σ/4(1–2γ)} O₄ =σ'/σ Mn²⁺ _σ(α–2ϕ) Zn_σβ Fe²⁺ _2σθ Mn³⁺ _2σϕ Fe³⁺ _{2σ(1–γ–θ)} [V ]_{σ/4(1–2γ–3ϕ)} O₄ +σ'φ/2O₂ (g) where α and β denote the MnO and ZnO mole fractions in the primary mixture γ=α+β, θ and ϕ depend on the quantities of Fe²⁺ and Mn³⁺ formed, respectively, φ=θ–ϕ and σ'/σ is a function of the former parameters. Even though the relative amounts of Fe²⁺ /Fe³⁺ and Mn²⁺ /Mn³⁺ remain uncertain, the vacancy content [V ] of the ferrite can be determined because it depends on φ alone, which is related to the change in mass of the sample as the synthesis takes place through the equation φ=(1.5–γ) μ_β /μ_O2 (1–m _f /m _i ) Here, m _i and m _f are the masses of the sample before and after O₂ evolution, μ_B is the formula mass of the ferrite and μ_O2 is the O₂ molar mass. Practically vacancy-free single-phase MnZn ferrite samples were obtained by sintering in air at 1250°C and cooling in pure N₂ . This revised version was published online in July 2006 with corrections to the Cover Date.     

Effect of multi-walled carbon nanotubes on crystallization behavior of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

The effect of multi-walled carbon nanotubes on the crystallization behavior of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) has been investigated. The results have shown that carbon nanotubes (CNTs) act as an effective heterogeneous nucleation agent, inducing an increase in crystallinity and crystallite sizes. Comparing with the double melting peaks in pure PHBV, there is only one peak in the melting curves of nanocomposites. The isothermal crystallization kinetics of PHBV and its nanocomposite containing 0.5% CNTs were examined based on Avrami equation, indicating that the crystallization half-time decreases while the overall crystallization rate k increases dramatically with CNTs addition. The spherulitic nucleation and growth kinetics were also discussed grounded on Lauritzen–Hoffman equation. It is found that there is a spherulitic growth rates (G) maximum within selected temperature range in our study. Also, the temperatures corresponding to G maximum shift to a high level with addition of CNTs. The parameters of the equilibrium melting temperature T_m⁰ T_m^0 , the nucleation parameter K _g , the lateral surface free energy σ, the fold surface free energy σ _e , and the work of chain folding q of PHBV and its composite containing 0.5% CNTs were all calculated. The reductions of K _g , σ _e and q values of nanocomposite are in agreement with the fact that the crystallization rate of PHBV increases greatly by addition of CNTs.     

Surfactant assisted preparation and characterization of carboxymethyl cellulose Sn(IV) phosphate composite nano-rod like cation exchanger

Carboxymethyl cellulose Sn(IV) phosphate composite nano-rod like cation exchanger with diameter in the range of 20–40 nm, length in the range of 100–150 μm and particle size in the range of 21–38 nm have been successfully prepared by surfactant assisted sol–gel method. Scanning electron microscopy, transmission electron microscopy, X-ray powder diffraction, fourier transform infra red spectroscopy and thermogravimetric analysis-differential thermal analysis studies were carried out to study the structure and morphology of this composite nano-rod like cation exchanger. Freundlich adsorption isotherm is well fitted for the adsorption of pyridine on the surface of this composite nano-rod like cation exchanger. The thermodynamic parameters such as Freundlich constant, thermodynamic equilibrium constant (K ₀), standard free energy changes (ΔG ⁰), standard enthalpy changes (ΔH ⁰) and standard entropy changes (ΔS ⁰) have been evaluated. These parameters indicated that the adsorption of pyridine on the surface of composite nano-rod like cation exchanger was feasible, spontaneous and exothermic in nature which suggests for the potential application of pyridine removal from water.     

Preparation and characterization of In<Subscript>2</Subscript>S<Subscript>3</Subscript> semiconductor thin films using the sol–gel method

This study describes the In₂S₃ semiconductor thin film coating on glass substrate by sol–gel method. The In₂S₃ thin film samples were prepared and examined by the X-ray diffraction (XRD), the UV–visible optical absorption and transmission study, and the Scanning Electron Microscope (SEM) image analyses. The XRD analysis results show that the In₂S₃ semiconductor thin films prepared by sol–gel method is formed at T~360–520 °C temperature interval. Band gap energy and optical absorption spectrum analysis of the In₂S₃ thin films reveal that Eg~2.51 eV for the In₂S₃ thin films. According to the EDX result the film was In-rich with the In/S = 1.42 ratio. The thickness of prepared In₂S₃ layer is about 400 nm.     

Quasi-classical trajectory studies of the stereodynamics of the reaction O + HCl → ClO + H

The stereodynamics of the O + HCl → ClO + H reaction are investigated by quasi-classical trajectory (QCT) method. The calculations are carried out on the ground 1 ¹ A′ potential energy surface (PES). The orientation and alignments of the product rotational angular momentum for the title reaction are reported. The influence of collision energy on the product vector properties is also studied in the present work. Four (2π/σ)(dσ₀₀/dω _t ), (2π/σ)(dσ₂₀/dω _t ), (2π/σ)(dσ₂₂₊/dω _t ), and (2π / σ)(dσ₂₁₋/dω _t ), and have been calculated in the center of mass frame.     

The Electronic Structure and Bonding of the First p-Block Paddlewheel Complex,Bi<Subscript>2</Subscript>(trifluoroacetate)<Subscript>4</Subscript>, and Comparison to d-Block Transition Metal Paddlewheel Complexes: A Photoelectron and Density Functional Theory Study

The photoelectron spectrum and a density functional computational analysis of the first p-block paddlewheel complex, Bi₂(tfa)₄, where tfa = (O₂CCF₃)⁻, are reported. The photoelectron spectrum of Bi₂(tfa)₄ contains an ionization band between the region of metal-based ionizations and the region of overlapping ligand ionizations that is not seen in the photoelectron spectra of d-block paddlewheel complexes. This additional ionization arises from an a_1g symmetry combination of the tfa ligand orbitals that is directed for σ bonding with the metals, and the unusual energy of this ionization follows from the different interaction of this orbital with the valence s and p orbitals of Bi compared to the valence d orbitals of transition metals. There is significant mixing between the Bi–Bi σ bond and this a_1g M–L σ orbital. This observation led to a re-examination of the ionization differences between Mo₂(tfa)₄ and W₂(tfa)₄, where the metal–metal σ and π ionizations are overlapping for the Mo₂ molecule but a separate and sharp σ ionization is observed for the W₂ molecule. The coalescing of the σ and π bond ionizations of Mo₂(tfa)₄ is due to greater ligand orbital character in the Mo–Mo σ bond (∼7%) versus the W–W σ bond (∼1%). In tribute to F. Albert Cotton for sharing the beauty of symmetry and the joy and excitement in the exploration of metal–metal bonds.     

Surface characterization of polyimide films

 Various kinds of poly(amide acid)s were prepared by the reaction of four kinds of acid dianhydride and three kinds of diamine in N,N-dimethylacetamide (DMAc). Polyimide films were prepared by casting the poly(amide acid) solution on soda glass substrates, followed by thermal imidization at various temperatures. Contact angles of polyimide films for the sides in contact both with air and with glass substrate (air side and glass side, respectively) were measured to evaluate the dispersive component (γ^D _S) and the nondispersive component (γ^P _S) of surface free energy (γ_S) of polyimide films. It was shown that, for the air side, γ^P _S value decreased greatly and γ^D _S values increased slightly with the development of imidization. Values of γ^P _S for the glass side were much higher than those for the air side. Poly(amide acid) solution was also cast on quartz glass and silicone rubber, and was thermally imidized. The γ^P _S for the quartz glass side was almost the same as that for the soda glass side. But the γ^P _S for the silicone rubber side was as low as the γ^P _S for the air side. Attenuated total reflection infrared spectroscopy of polyimide films showed that the degree of imidization for the glass side surface was not as high as that for the air side surface, and that the amount of polar groups for the glass side surface was higher than that for the air side surface. Among the various kinds of polyimides, there is a slight but clear difference in the values of γ_S and its components, which can be rationalized from the difference in the chemical structure. It was also found that thermal degradation and oxidation can be easily detected from the change of surface free energy and its components for the polyimide films after being treated at high temperatures in both air and vacuo. Received: 22 January 1998 Accepted: 10 March 1998     

Ab initio calculations of chloride complexes of Au, Hg, Tl, Pb, and Bi in anomalous oxidation states (2S1/2 electron state)

Ab initio calculations of chloride complexes of Au, Hg, Tl, Pb, and Bi in anomalous oxidation states (²S_1/2 electron state) were carried out by the Becke-Lee-Yang-Parr density functional method using the Dunning-Hay LanL2DZ basis set. Optimum geometric parameters and electronic characteristics of MCl _n (H₂O) _m ⁿ (n=1–4 andm=0,4,5) complexes were determined. In each of the considered series the spin, population on the central metal atom decreases as its atomic number increases. The energy of transition of the unpaired electron to the lowest unoccupied MO decreases in the same order. The unpaired electron occupies an orbital that is mostly a linear combination of the s-orbital of the metal atom and the p-orbital of the Cl atom (the antibonding σ-orbital of the M−Cl bond). Distinctions in the changes in spectral properties of aquacomplexes and chloride complexes in isoelectronic series, observed as the degree of oxidation of the metal atom increases, were explained. The results of calculations are in agreement with the experimental data obtained by ESR and optical spectroscopy. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1049–1055, June, 1999.     

MoS<Subscript>2</Subscript> single slab as a model for active component of hydrodesulfuration catalyst: a quantum chemical study 1. Molecular and electronic structure of Mo<Subscript>12</Subscript>S<Subscript>24</Subscript> macromolecule and its adsorption complex with H<Subscript>2</Subscript>S

The molecular and electronic structure of Mo₁₂S₂₄ macromolecule as the MoS₂ single slab structure was calculated by the density functional theory (DFT) method with the B3P86 hybrid exchange-correlation functional. The results of calculations point to slight relaxation of coordinatively unsaturated Mo and S atoms, which is consistent with the published data. The calculated width of the forbidden band (0.85–0.98 eV) is comparable with the experimental value (1.30 eV) and similar to that obtained from DFT calculations with periodic boundary conditions (0.89 eV). The surface Mo centers in the Mo₁₂S₂₄ macromolecule are more reduced than the internal (Mo^IV) atoms. In order to characterize the adsorption capacity of coordinatively unsaturated Mo centers, a Mo₁₂S₂₄·6H₂S adsorption complex was calculated. The structure and energy characteristics of the adsorption complex point to a weak donor-acceptor interaction of the π-lone pair of H₂S molecule with the surface (reduced) Mo centers. The active center of thiophene hydrodesulfuration catalysts is formed as a result of the oxidative addition of hydrogen followed by occlusion of hydrogen into the MoS₂ matrix. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2189–2193, October, 2005.