Selective formation of a self-assembling homo or hetero cavitand cage via metal coordination based on thermodynamic or kinetic control

The selective formation of a homo or hetero cavitand cage composed of two molecules of tetra(4-pyridyl)-cavitand (1), tetrakis(4-cyanophenyl)-cavitand (2), or tetrakis(4-pyridylethynyl)-cavitand (3), and four molecules of Pd(dppp)(OTf)(2) (4) or Pt(dppp)(OTf)(2) (5) has been studied. A 1:1:4 mixture of 1 with more steric restriction, 2 with less coordination ability, and 4 or 5 specifically self-assembled into a hetero cavitand cage 6 or 7, respectively. In contrast, a 1:1:4 mixture of 2, 3, and 4 in CDCl(3) at room temperature assembled into the most labile homo cyanophenyl cavitand cage 8 and the most stable homo pyridylethynyl cavitand cage 9 in a 1:1 ratio. Upon heating at 50 degrees C, the thermodynamic equilibrium was shifted to a 1:1:1 mixture of 8, 9, and a hetero cavitand cage 10. When 1 equiv of 3 was added to 8 at room temperature, 8, 9, and 10 were formed initially in a 1:1:3 ratio and finally shifted to a 1:1:1 ratio. In the Pt-system, upon addition of 1 equiv of 3 to homo cyanophenyl cavitand cage 11 in CDCl(3) at room temperature, the ratio of hetero to homo cavitand cage (13/12) initially attained was 8.7 and remained above 5.6 at room temperature. Upon heating at 50 degrees C, 13 was finally converted to 11 and 12. Thus, the selectivity for the self-assembly of the homo or hetero cavitand cage is controlled by the balance between kinetic and thermodynamic stabilities of cages based on a combination of factors such as coordination ability and steric demand of the cavitands.     

Complete selection of a self-assembling homo- or hetero-cavitand cage via metal coordination based on ligand tuning

Selective formation of a homo- or hetero-cavitand cage via metal-coordination, by using tetra(4-pyridyl)-cavitand (1), tetrakis(4-pyridylethynyl)-cavitand (2), or tetrakis(4-cyanophenyl)-cavitand (3) as deep cavitand ligands and Pd(dppp)(OTf)2 (4) as a connector, has been investigated by 1H NMR and CSI-MS. When the cavitand and 4 were mixed in CDCl3 in a 2:4 molar ratio, 1 gave a complicated mixture, whereas 2 or 3 formed a homo-cavitand cage {2(2).4[Pd(dppp)]}8+.8(TfO-) (5) or {2(3).4[Pd(dppp)]}8+.8(TfO-) (6), respectively, as a single species. In a 1:1:4 mixture of 2, 3, and 4, homo-cavitand cages 5 and 6 were observed in a 1:1 ratio. In marked contrast, a mixture of 1, 3, and 4 in a 1:1:4 ratio was exclusively self-assembled into a hetero-cavitand cage {1.3.4[Pd(dppp)]}8+.8(TfO-) (7). The selectivity for the self-assembly of the homo- or hetero-cavitand cage via metal coordination would arise from a combination of factors such as coordination ability and steric demand of cavitand ligands.     

Studies on Triterpenoid Glycosides from Rhizomes of Panacis majoris and Their Antiplatelet Aggregation Activity

A new triterpenoid glycoside(1) and seven known triterpenoid glycosides, pseudoginsenoside RT2(2), yesanchinoside R2(3), vinaginsenoside R13(4), vinaginsenoside R8(5), notoginsenoside E(6), 6'-O-acetylginsenoside Re(7), 6"-O-acetylginsenoside Rb₁(8), were isolated from the rhizomes of Panacis majoris. The new triterpenoid glycoside was elucidated as 3-O-[β-D-glucopyranosyl-(1→2)-β-D-(6'-O-ethyl)-glucuronopyranosyl]-oleanolic acid-28-O-β-D-glucopyranoside by extensive spectroscopic and phytochemical methods. Compounds 2-8 were obtained from the plant for the first time. Compounds 3 and 4 displayed good activities against adenosine diphosphate (ADP)-induced platelet aggregation, and compounds 1, 5, 6 and 8 showed moderate activities. Compound 6 exhibited moderate antiplatelet aggregation activity induced by arachidonic acid(AA).     

Metal-directed self-assembly of cavitand frameworks

The self-assembly between bidentate cavitand ligands and mono/dinuclear metal precursors to give cavitand frameworks has been explored. For this purpose, two new cavitands bearing AB and AC phenylpyridyl moieties at the upper rim have been synthesized. A series of self-assembled molecular dimers featuring fac-Re(CO)(3)Br as metal corners have been prepared and characterized. Two possible dimeric structures (C-shaped and S-shaped) are possible when AB cavitand 2 is used in the self-assembly reaction; only one is obtained in the case of AC cavitand 3. In addition, the self-assembly of AB-dibridged cavitand 2 with dinuclear Pd/Pt metal precursors 5a and 5b has been studied. At this level of complexity, the self-assembly can lead to more than one structure. Several different final structures have been envisioned and their formation analyzed in silico and in solution. Out of the three possible cyclic structures (dimer, trimer, and tetramer), only the entropically favored dimer 6a (6b) is formed, as predicted from molecular modeling and demonstrated by PGSE NMR experiments.     

Expanding cavitand chemistry: the preparation and characterization of [n]cavitands with n>=4

The preparation of cavitands composed of 4, 5, 6, and 7 aromatic subunits ([n]cavitands, n=4-7) is described. The simple, two-step synthetic procedure utilized readily available starting materials (2-methylresorcinol and diethoxymethane). The two cavitand products having 4 and 5 aromatic subunits exhibited highly symmetric cone conformations, while the larger cavitands (n = 6 and 7) adopt conformations of lower symmetry. 1H NMR spectroscopic studies of [6]cavitand and [7]cavitand revealed that these hosts undergo exchange between equivalent conformations at room temperature. The departure of these two cavitands from cone conformations is related to steric crowding on their Ar-O-CH2-OAr bridges and is predicted by simple molecular mechanics calculations (MM2 force field). X-ray diffraction studies on single crystals of the [4]cavitand, [5]cavitand, and [6]cavitand hosts afforded additional experimental support for these conclusions.     

Solvent effects in thermodynamically controlled multicomponent nanocage syntheses

The solvent effects on the condensation reaction between tetraformylcavitand 2 and ethylene-1,2-diamine 3 are reported. Earlier, it was found that the trifluoroacetic acid-catalyzed condensation of 2 and 2 equiv of 3 in CHCl(3) provides in 82% yield an octahedral nanocage 1 composed of 6 cavitands that are linked together by 12 -CH=N-CH(2)CH(2)-N=CH- linker groups (Liu, X.; Liu, Y.; Li, G.; Warmuth, R. Angew. Chem., Int. Ed. 2006, 45, 901). In tetrahydrofuran, the same reactants yield a tetrameric nanocage 4 (35% yield), which resembles a distorted tetrahedron built up from four cavitands that occupy the apexes. Each cavitand is doubly linked to one other cavitand and singly linked to the other two cavitands via -CH=N-CH(2)CH(2)N=CH- connectors. In CH(2)Cl(2), the reaction between 8 2 and 16 3 yields a square antiprismatic nanocage 5 (65% yield), in which each cavitand occupies one of the eight corners and is connected to four neighboring cavitands via -CH=N-CH(2)CH(2)-N=CH- linkers. Nanocage 5 is also the main product in CH(2)ClCH(2)Cl (26% yield) and CHCl(2)CHCl(2) (33% yield). Reduction of all imine bonds in 4 and 5 yields polyaminonanocontainers 7 and 8, respectively, which were isolated as trifluoroacetate salts. Contrary to the formation of larger capsules composed of four, six, or eight cavitands in the reaction between 2 and 3, the acid-catalyzed reaction of 2 with 2 equiv of H(2)N-X-NH(2) (X = (CH(2))(n)(=3,4,5), 1,3-C(6)H(4), 1,4-(CH(2))(2)C(6)H(4), or 1,3-(CH(2))(2)C(6)H(4)) quantitatively yields octaiminohemicarcerands 9-14, in which two cavitands are connected with four -CH=N-X-N=CH- linkers. The outcomes of these condensation reactions are rationalized with the different diamine structures and the relative orientation of cavitands in 1, 4, 5, and 9-14.     

Structural properties of benzimidazole cavitand and its selective recognition toward 4-methylbenzamide over 4-methylanilide

The conformations and properties of cavitand 5 with four benzimidazole flaps are studied by (1)H NMR. The benzimidazole cavitand 5 can form very stable vase structures with an enforced concave cavity by intermolecular hydrogen bonding with four hydroxyl-containing molecules, X-OH, such as methanol (X = Me), acetic acid (X = CH(3)CO), and trifluoroacetic acid (X = CF(3)CO). The stronger hydrogen bond donor strengths of X-OH are, the stronger hydrogen bonds are formed between the NH and N atoms of the neighboring benzimidazole fragments and the more vase structures of 5.4HOX are stable. The annular tautomerism of 5 in CDCl(3)/CD(3)OD (9:1, v/v) due to the proton exchange between NH and N atoms of the neighboring benzimidazole fragments is observed by 400 MHz (1)H NMR, and the free energy of activation is measured as DeltaG++(210) = 10.2 kcal/mol at a coalescence temperature of 210 K. Cavitand 5 forms inclusion complexes with 4-methylbezamide guests such as 4-methyl-N-p-tolylbenzamide 6 and N,4-dimethylbenzamide 7 in water-saturated CDCl(3). However, an isomorphic 4-methylanilide guest such as N-4-tolylacetamide 8 cannot be recognized in the concave cavity of 5. This high selectivity toward 4-methylbenzamide over 4-methylanilide seems attributable to the hydrogen-binding interaction between the NH proton of 4-methylbezamide guest 7 and the oxygen atom of the closest water molecule.     

Self-assembly of nanosize coordination cages on si(100) surfaces

Bottom-up fabrication of 3D organic nanostructures on Si(100) surfaces has been achieved by a two-step procedure. Tetradentate cavitand 1 was grafted on the Si surface together with 1-octene (Oct) as a spatial spectator by photochemical hydrosilylation. Ligand exchange between grafted cavitand 1 and self-assembled homocage 2, derived from cavitand 5 bearing a fluorescence marker, led to the formation of coordination cages on Si(100). Formation, quantification, and distribution of the nanoscale molecular containers on a silicon surface was assessed by using three complementary analytical techniques (AFM, XPS, and fluorescence) and validated by control experiments on cavitand-free silicon surfaces. Interestingly, the fluorescence of pyrene at approximately 4 nm above the Si(100) surface can be clearly observed.     

Trapping of bulky guests inside dimeric molecular capsules formed by a deep-cavity cavitand

The inclusion of three bulky guests, adamantyl(ferrocenylmethyl)amine (2), adamantylferrocenecarboxylamide (3), and 1,1'-bis(adamantylaminomethyl)ferrocene (4), inside dimeric molecular capsules formed by an octaacid deep-cavity cavitand (1) was investigated using (1)H NMR spectroscopy and voltammetric techniques. Guests 2 and 3 were encapsulated inside 1(2) assemblies, as evidenced by (1)H NMR spectroscopic data. Although both guests are electroactive, the supramolecular complexes 2@1(2) and 3@1(2) showed no voltammetric current responses in the potential window corresponding to the electrochemical oxidation of their ferrocenyl groups. In contrast, each of the adamantyl ends of compound 4 is bound by the cavitand 1, but the central ferrocene residue was not fully encapsulated in this supramolecular assembly and the voltammetric behavior of 4·1(2) was clearly detected. In marked contrast with the experimental results obtained with guests 2 and 3, we could not obtain any evidence for the simultaneous encapsulation of free ferrocene and adamantane inside the 1(2) capsular assembly.     

Design and self-assembly of ditopic and tetratopic cavitand complexes

The self-assembly of open ditopic and tetratopic cavitand complexes has been investigated by using monofunctionalized cavitand ligands and suitable metal precursors. In the case of ditopic complexes, self-assembly protocols, leading exclusively to the formation of both thermodynamically stable cis-Pt square-planar complexes 8 and 9 and the kinetically inert fac-Re octahedral complex 14, have been elaborated. The use of cis-[Pt(CH3)CN)2Cl2] as metal precursor led to the formation of monotopic trans-10 and ditopic trans-11 cavitand complexes, while cis-[Pt(dmso)2Cl2] afforded both cis-13 and trans-11 isomers. The self-assembly of tetratopic cavitand complexes has been achieved by using mononuclear [Pd(CH3CN)4(BF4)2] and dinuclear [M2(tppb)(OTf)4] (19: M = Pt; 20: M = Pd) metal precursors. Only the tetratopic dinuclear complexes 21 and 22 were stable. The ligand configuration with two phosphorus and two cavitand ligands at the metal centers is the most appropriate to build tetratopic cavitand complexes with sufficient kinetic stability.     

Shamrock surfactants: synthesis and characterization

Two types of a new class of surfactants with three headgroups, which possess the general structure 1, have been prepared. Within structure 1, a central headgroup is connected to two flanking headgroups by hydrocarbon chains. The term "shamrock" is used to describe surfactants of structure 1, denoting their triple-headed character and reflecting the fact that shamrocks have leaflets in groups of three. The major lipophilic character of shamrock surfactants is provided by the two hydrocarbon chains linking the three headgroups and not by long-chain alkyl groups appended to the linking hydrocarbon chains or the headgroups. The new surfactants are 2a (2,2,15,15,28,28-hexamethyl-2,15,28-triazonianonacosane triiodide), 2b (2,2,15,15,28,28-hexamethyl-2,15,28-triazonianonacosane trichloride), 3a (O,O'-di-[10-(N,N,N-tripropylammonio)decyl]phosphorodithioate bromide), and 3b (O,O'-di-[10-(N,N,N-tributylammonio)decyl]phosphorodithioate bromide). Compound 14 (2,2,9,9,16,16-hexamethyl-2,9,16-triazoniaheptadecane triiodide) was prepared for comparison with 2a. Surfactants 2 and 3 were characterized in water by measurement of their Krafft temperatures and critical aggregation concentrations, and their aggregates were studied by 1H NMR spectroscopy, dynamic laser light scattering, and phase-contrast optical microscopy. Aqueous 2b was also studied by cryo-etch high-resolution scanning electron microscopy, which revealed irregularly shaped cells containing a complex matrix of surfactant. Coacervates were observed by optical microscopy upon the hydration of 2 and 3.     

Metal-switching and self-inclusion of functional cavitands

Cavitands bearing both eight (5) and two (13) metal-ligating carboxymethylphosphonate groups on their rims were synthesized by Arbuzov reaction of the corresponding bromoacetamido cavitands with trialkyl phosphites. These exist in the vase conformation in CDCl(3) and are stabilized by a cyclic seam of hydrogen bonds. This structure was also found in the solid state for the octabromoacetamide 4a and diphosphonate cavitand 13 by single-crystal X-ray analysis. Cavitands 5 and 13 form caviplexes in CDCl(3), CD(2)Cl(2), and alcohol solutions with adamantane derivatives 15a,b, quinuclidine 15d, ammonium and phosphonium salts 14, and drugs like ibuprofen 15c, all of which are stable on the NMR time scale at 295 K. NMR spectroscopy reveals that at 223 K octaphosphonate 5b exists in two forms: the major C(4)-symmetrical compound is filled with solvent while the minor species shows intramolecular inclusion of a dialkoxyphosphoryl group. In methanol-d(4) 5 and 13 exist in a lower symmetry vase conformation with self-inclusion of one alkyl group. Interaction of these complexes with La(OTf)(3) results in a change in the conformation of the cavitand from vase to kite with concomitant and quantitative release of the encapsulated guests. Two to three equivalents of the lanthanide salt per equivalent of cavitand 5a-d is necessary for the complete decomplexation of the included guest. The kite and the vase conformers equilibrate slowly on the NMR time scale at 295 K. The addition of good ligands for metal cations (nitrate or CMPO calixarene 16) shifts the equilibrium to the vase-shaped caviplex and allows quantitative control of the binding and release of the guest. The lanthanide complexes of octaphosphonates 5 in methanol-d(4) are velcraplex-like dimers held together by four metal cations.     

Anion binding by a tetradipicolylamine-substituted resorcinarene cavitand

Anion binding has been achieved with a resorcinarene substituted with four 2,2'-dipicolylamine moieties on the upper rim. The four dipicolylamine groups reside in proximity on one rim of the cavitand. The dipicolylamine groups were protonated with triflic acid to provide the cationic ammonium sites for anion binding. This anion receptor binds strongly to anions of different geometries, such as H(2)PO(4)(-), Cl(-), F(-), CH(3)CO(2)(-), HSO(4)(-), and NO(3)(-). The association constants for binding these anions are large, on the order of log K = 5 in CD(3)CN, a solvent of intermediate dielectric constant. These values represent significant binding compared to other cavitands with nitrogen pendant groups. Evidence suggests that the cavitand provides two identical receptor sites formed by two dipicolylamine groups, facilitating the simultaneous binding of two anions. Intramolecular binding of anions between two protonated dipicolylamine groups is indicated on the basis of the comparison to a structurally similar monomeric analogue and by semiempirical PM3 molecular modeling. Titrations with the analogue result in much weaker anion association, even at high concentrations, indicating the importance of proximity and preorganization of sites on the cavitand upper rim.     

Synthesis and antimicrobial activity of N'-heteroarylidene-1-adamantylcarbohydrazides and (±)-2-(1-adamantyl)-4-acetyl-5-[5-(4-substituted phenyl-3-isoxazolyl)]-1,3,4-oxadiazolines

The reaction of adamantane-1-carbohydrazide (1) with heterocyclic aldehydes, namely 5-(4-chlorophenyl)isoxazole-3-carboxaldehyde (2a), 5-(4-methylphenyl)isoxazole-3-carboxaldehyde (2b), 5-(4-methoxyphenyl)isoxazole-3-carboxaldehyde (2c), 1H-imidazole-2-carboxaldehyde and 2-butyl-4-chloro-1H-imidazole-5-carboxaldehyde, in ethanol, yielded the corresponding N'-heteroarylidene-1-adamantylcarbohydrazides 3a, 3b, 3c, 4 and 5, respectively, in good yields. The 4-acetyl-1,3,4-oxadiazoline analogues 6a?c were prepared in 48-55% yields by heating their corresponding N'-heteroarylidene-1-adamantylcarbohydrazides 3a-c with acetic anhydride for two hours. Compounds 3a-c, 4, 5 and 6a-c were tested for in vitro activities against a panel of Gram-positive and Gram-negative bacteria and the yeast-like pathogenic fungus Candida albicans. Compounds 4 and 5 displayed potent broad-spectrum antimicrobial activity, while compounds 3a-c showed good activity against the Gram-positive bacteria.     

Beiträge zur Chemie der Alkylverbindungen von Übergangsmetallen. 59. Cyclopentadienyl-2-(dimethylaminomethyl)ferrocenyl-Verbindungen elektronenarmer 3 d-Elemente

Contributions to the Chemistry of Transition Metal Alkyl Compounds. 59. Cyclopentadienyl-2-(dimethylaminomethyl)ferrocenyl Compounds of Early 3 d-Elements Compounds of the type (C₅H₅)₂M(FcN) (M = Sc ( 1 ), Ti ( 2 ), V ( 3 ), Cr ( 4 ); FcN = 2-dimethylaminomethyl)ferrocenyl group), and (C₅H₅)M(FcN)₂ (M = Ti ( 5 ), Cr ( 6 ) were synthesized and investigated. A detailled characterization with respect to the existence of chelate structures was realized by the uv-vis, ¹H-n.m.r. spectroscopic measurements and determination of magnetic moments.     

New taxane diterpenoids from the roots of Taiwanese Taxus mairei

Five new taxane diterpenoids, taxumairols G (1), H (2), I (3), J (4), and L (5) were isolated from extracts of the roots of Taiwanese Taxus mairei (LEMEE & LEVL.) S. Y. Hu. Compounds 1-4 belong to the new 11(15-->1)-abeo-taxene system, having a tetrahydrofuran ring along carbons C-2, C-3, C-4 and C-20. Compounds 3 and 4 contain an isopropenyl group at C-1 while compounds 1 and 2 are attached with a benzoxyl group at C-15. The structures of compounds 1-5 were determined on the basis of two-dimensional (2D)-NMR techniques including correlation spectroscopy (COSY), heteronuclear single quantum coherence (HSQC), heteronuclear multiple bond correlation (HMBC), and nuclear Overhauser effect spectroscopy (NOESY) experiments.     

Microbial transformation of diosgenin by Syncephalastrum racemosum (Cohn) Schroeter

<正>Microbial transformation of diosgenin(1) by Syncephalastrum racemosum yielded five new polar metabolites,which wereidentified as(25R)-spirost-5-en-3β,7α,9α-triol-12-one(2),(25R)-spirost-5-en-3β,9α,12α-triol-7-one(3),(25R)-spirost-5-en-3β,9α-diol-7,12-dione(4),(25R)-spirost-4-en-9α,12β,14α-triol-3-one(5),and(25S)-spirost-4-en-9α,14α,25β-triol-3-one(6).Compounds 1-6 exhibited moderate cytotoxicity against K562 cells and among them compounds 2,3,and 6 were more potentthan the parent compound 1.     

Molecular structure and nonlinear optical properties of a tetrasilver(I) phosphonitocavitand

A tetrasilver(I) phosphonitocavitand was synthesized and structurally characterized. The compound crystallizes in the monoclinic space group P2₁/n with a=15.0151(13), b=39.832(4), c=15.2479(14) Å, β=95.1000(2)°, V=9083.3(14) Å³ and Z=4. The structure contains four coplanar silver atoms bridged by four μ-Cl and one central trapped μ₄-Cl atoms in the inside of the closing bowl-shaped cavitand. Nonlinear optical properties of this metal-cavitand were investigated. Optical limiting effect with threshold of 0.6 J cm⁻² was observed with the laser pulses of 7 ns at 532 nm.     

柳叶五层龙正丁醇提取部分中的3个新酚性成分及其α-葡萄糖苷酶抑制活性

采用多种色谱分离方法从柳叶五层龙(Salacia cochinchinensis Lour)的茎叶中分离得到5个化合物. 通过一维(1D)及二维核磁共振波谱(2D NMR), 包括核磁共振氢谱(¹H NMR)、 核磁共振碳谱(¹³C NMR)、 异核单量子相关(HSQC)、 异核多键相关(HMBC)、 氢氢相关(¹H-¹H COSY)和旋转坐标中的欧沃豪斯增强光谱(ROESY), 以及红外光谱(IR)和电喷雾电离高分辨质谱(ESI-HRMS)等方法, 鉴定其结构分别为Salaciacochinoside A(1), 5'-O-3,4,5-trimethoxybenzoyl-β-D-apiofuranoside(2), 5-methoxy-anticerol A(3), 21α,30-dihydroxy-D∶A-friedooleanan-3-one(4)和21α,26-dihydroxyfriedelan-3-one(5). 化合物1~3为新化合物. α-葡萄糖苷酶抑制活性测试结果显示, 化合物1和3对α-葡萄糖苷酶具有显著的抑制作用, 其IC₅₀值分别为0.32和0.59 μmol/L; 化合物2, 4和5未表现出α-葡萄糖苷酶抑制活性.     

Thermodynamics of micellization of multiheaded single-chain cationic surfactants

The energetics of micelle formation of three single-chain cationic surfactants bearing single (h = 1), double (h = 2), and triple (h = 3) trimethylammonium [(+)N(CH(3))(3)] headgroups have been investigated by microcalorimetry. The results were compared with the microcalorimetric data obtained from well-known cationic surfactant, cetyl trimethylammonium bromide (CTAB), bearing a single chain and single headgroup. The critical micellar concentrations (cmc's) and the degrees of counterion dissociation (alpha) of micelles of these surfactants were also determined by conductometry. The cmc and the alpha values increased with the increase in the number of headgroups of the surfactant. The relationship between the cmc of the surfactant in solution and its free energy of micellization (DeltaG(m)) was derived for each surfactant. Exothermic enthalpies of micellization (DeltaH(m)) and positive entropies of micellization (DeltaS(m)) were observed for all the surfactants. Negative DeltaH(m) values increased from CTAB to h = 1 to h = 2 and decreased for h = 3 whereas DeltaS(m) values decreased with increase in the number of headgroups. The DeltaG(m) values progressively became less negative with the increase in the number of headgroups. This implies that micelle formation becomes progressively less favorable as more headgroups are incorporated in the surfactant. From the steady-state fluorescence measurements using pyrene as a probe, the micropolarities sensed by the probe inside various micelles were determined. These studies suggest that the micelles are more hydrated with multiheaded surfactants and the micropolarity of micelles increases with the increase in the number of headgroups.