Development of a micro dual beam fluorometric detector specific for microchip analysis of benzo[a]pyrene and benzo[k]fluoranthene in diesel exhaust particulate samples

We developed a device and some systems for detecting benzo[a]pyrene (B[a]P) and benzo[k]fluoranthene (B[k]F). The device uses a UV light-emitting diode that emits light with a wavelength of 370 nm and a violet laser diode that emits light with a wavelength of 395 nm as excitation light sources. The detection method is based on the following observation: characteristic fluorescence is emitted from both B[a]P and B[k]F, with intensities up to 10 times greater than those from 22 other polycyclic aromatic hydrocarbons (PAHs). The excitation and emission wavelengths for fluorescence from B[a]P and B[k]F are 370 and 429 nm, and 395 and 429 nm, respectively. Further, we calculated their concentrations in diesel exhaust particles by means of two calibration curves determined using a mixture of 24 PAHs. The detection limits of the proposed device with a microchip are 5.58 microg L(-1) for B[a]P and 6.03 microg L(-1) for B[k]F. We applied this method to analyze B[a]P or B[k]F contained in three types of diesel exhaust particles, and the results agreed well with those obtained by liquid chromatography.     

Synthesis of 11C-labelled N,N'-diphenylurea and ethyl phenylcarbamate by a rhodium-promoted carbonylation via [11C]isocyanatobenzene using phenyl azide and [11C]carbon monoxide

The reaction with phenyl azide and [11C]carbon monoxide to give N,N'-diphenyl[11C]urea and ethyl phenyl[11C]carbamate has been studied with the aim of development of a new methodology for carbonylation using [11C]carbon monoxide with high specific radioactivity. The synthesis of 11C-labelled N,N'-diphenylurea from phenyl azide and [11C]carbon monoxide, with 1,2-bis(diphenylphosphino)ethane-bound Rh(I) complex at 120 degrees C at a pressure of 35 MPa in the presence of aniline was accomplished in 82% trapping efficiency and 82% conversion yield. This approach was also useful for the synthesis of ethyl phenyl[11C]carbamate with lithium ethoxide as a nucleophilic reagent giving 90% trapping efficiency and 76% conversion yield. These reactions can be considered to proceed via a [11C]isocyanate or a [11C]isocyanate-coordinated Rh complex to give the corresponding 11C-products. This protocol provides the chemical basis for the synthesis of [11C]urea and [11C]carbamate derived from [11C]isocyanates.     

P=C bonds as building blocks for three- and four-membered heterocyclic cations: synthesis, structures and mechanistic studies

The activation of the P=C bond of phosphaalkenes with electrophiles is investigated as a means to prepare and characterize unusual organophosphorus compounds. Treatment of RP=CHtBu (1a: R=tBu; 1b: R=1-adamantyl) with HOTf (0.5 equiv) affords diphosphiranium salts [RP-CHtBu-PR (CH(2)tBu)]OTf ([2a]OTf and [2b]OTf), each containing a three-membered P(2)C ring. In contrast, the addition of MeOTf (0.5 equiv) to either 1a or 1b affords diphosphetanium salts [RP-CHtBu-P(Me)R-CHtBu]OTf ([3a]OTf and [3b]OTf) containing four-membered P(2)C(2) heterocycles. The phosphenium triflate [tBuP(CH(2)tBu)]OTf ([5a]OTf) and methylenephosphonium triflate [tBu(Me)P=CHtBu]OTf ([7a]OTf) are identified spectroscopically as intermediates in the formation of [2a](+) and [3a](+), respectively. The phosphenium triflate intermediate can be trapped with 2-butyne to afford phosphirenium salt [MeC=CMe-tBuPCH(2)tBu]OTf ([6a]OTf). Treatment of diphosphetanium [3a]OTf with an excess MeOTf affords [Me(2)P-CHtBu-PMetBu-CHtBu](OTf)(2) ([4a](OTf)(2)), a compound containing a diphosphetanium dication. The molecular structures are reported for [2a]OTf, [2b][H(OTf)(2)], [3a]I, [3b]I, [4a](OTf)(2), and [6a]OTf.     

Helic[6]arene-Based Chiral Pseudo[1]rotaxanes and [1]Rotaxanes

Chiral pseudo[1]rotaxanes and [1]rotaxanes constructed from macrocyclic arenes still remain a big challenge mainly owing to the lack of such chiral macrocycles. In this work, a new system of chiral pseudo[1]rotaxanes formed by self-inclusion of helic[6]arene containing amide linked with the terminal tertiary amines was first discovered. Based on an atom-economic stopping strategy, a pair of chiral [1]rotaxanes were conveniently obtained in almost quantitative yields by blocking the pseudo[1]rotaxanes with monobenzyl bromide of tetraphenylethene. The structures of pseudo[1]rotaxanes and [1]rotaxanes were characterized by 2D NMR spectra in solution, combined with DFT calculations. The photophysical properties further revealed the efficient chirality transfer of helic[6]arene to the tetraphenylethene moiety, compared to their unthreaded chiral isomers. The discovery of the chiral pseudo[1]rotaxanes allows for a wide and available synthesis of chiral [1]rotaxanes, and also opening a new avenue to the design of chiral supramolecular materials.     

Preparations of 2-azabicyclo[2.2.2]octa-5,7-dien-3-ones and 7-azabicyclo[4.2.0]octa-2,4-dien-8-ones from addition reactions of 2-pyridones

The low temperature photoaddition of 2-pyridone with dimethyl acetylenedicarboxylate gave a [4 + 2]-cycloadduct and a [2 + 2]-cycloadduct across the 5,6-position of 2-pyridone. Their formations were competing with a Michael reaction of the two substrates at the room temperature reaction. The reactions of other pyridones with dimethyl acetylenedicarboxylate gave [2 + 2]- and/or [4 + 2]-cycloadducts. The [2 + 2]-cycloadducts underwent an intriguing rearrangement to fused β-lactams.     

Nucleophilic addition to benzo[b]thieno[2,3-b]benzo[b]thiophene S,S,S′,S′-tetroxide

The reaction of benzo[b]thieno[2,3-b]benzo[b]thiophene S,S,S′,S′-tetroxide with primary and secondary amines and with alcohols gave 10 b-amino- and 10 b-alkoxy-5a, 10b-dihydro-benzo[b]thieno[2,3-b]benzo[b]thiophene S,S,S′,S′-tetroxides. These nucleophilic reagents do not add to benzo[b]thieno[2,3-b]benzo[b]thiophene S,S-dioxide.     

The first, discrete Zn4 tetrahedron with a selenium atom in the center: x-ray structure and solution study of [Zn4(mu4-Se)[Se2P(OPr)2]6

The first discrete, selenium-centered tetranuclear zinc cluster [Zn4(mu4-Se)[Se2P(OPr)2]6] was isolated and characterized. The cluster consists of six edge-bridged dsep ligands with four zinc atoms in a slightly distorted tetrahedron and a mu4-Se atom in the center. In addition, 12 mu2-bridging selenium atoms form a Se12 icosahedron. From variable-temperature 31P NMR studies, it was observed that the cluster [Zn4(Se)[Se2P(OPr)2]6] is partly decomposed to [Zn[Se2P(OPr)2]2] and the monomeric species [Zn[Se2P(OPr)2]2] is further in equilibrium with its dimer [Zn[Se2P(OPr)2]2]2.     

Reaction of azole condensed quinoxaline N-oxides with acetic anhydride

The reaction of 7-chlorotetrazolo[1,5-α]quinoxaline 5-oxide 6a with acetic anhydride gave 7-chloro-5-(7-chlorotetrazolo[1,5-α]quinoxalin-4-yl)-4,5-dihydro-4-oxotetrazolo[1,5-α]quinoxaline 7a , while the reaction of 7-chloro-1,2,4-triazolo[4,3-α]quinoxaline 5-oxide 6b with acetic anhydride afforded 7-chloro-5-(7-chloro-1,2,4-triazolo[4,3-α]quinoxalin-4-yl)-4,5-dihydro-4-oxo-1,2,4-triazolo[4,3-α]quinoxaline 7b and 7-chloro-4,5-dihydro-4-oxo-1,2,4-triazolo[4,3-α]quinoxaline 8b . The reaction of compound 6a or 6b with acetic anhydride/acetic acid provided 7-chloro-4,5-dihydro-4-oxo-tetrazolo[1,5-α]quinoxaline 8a or compound 8b , respectively.     

Selective complexation of n-alkanes with pillar[5]arene dimers in organic media

A pillar[5]arene dimer was synthesized by linking a mono-hydroxylated pillar[5]arene with 1,4-bis(bromomethyl)benzene. The pillar[5]arene dimer formed stronger complexes with n-alkanes than did a monomeric pillar[5]arene.     

Syntheses of some new azolopyrido‐[4′,3′:4,5]thieno[2,3‐d]pyrimidines

Diethyl 2‐[(ethoxythioxomethyl)amino]‐4,5,6,7‐tetrahydrothieno[2,3‐c]‐pyridine‐3,6‐dicarboxylate 2 , prepared from diethyl 2‐isothiocyanato‐4,5,6,7‐tetrahydrothieno[2,3‐c]pyridine‐3,6‐dicarboxylate 1 by boiling in anhydrous ethanol, was converted into pyrido[4′,3′:4,5]thieno[2,3‐d]pyrimidine derivatives 3, 4 by treatment with hydrazine hydrate. The tetracyclic systems imidazo[1,2‐a]pyrido‐[4′,3′:4,5]thieno[2,3‐d]pyrimidine 9 and pyrido[4′,3′:4,5]thieno[2,3‐d][1,3]thiazolo‐[3,2‐a]pyrimidine 10 were synthesized by the reaction of 2 with 1,2‐diaminoethane and aminoethanethiol, respectively. The hydrazino derivative 4 underwent cyclization reactions with orthoesters and nitrous acid to give the corresponding pyrido[4′,3′:4,5]thieno[2,3‐d][1,2,4]triazolo[1,5‐a]pyrimidines 5, 6 and pyrido[4′,3′:4,5]thieno[3,2‐e][1,2,3,4]tetrazolo[1,5‐a]pyrimidine 8 , respectively. Moreover, reactions of 3 with cyanogen bromide, N‐carbethoxyhydrazine, carbon disulfide, and ethylchloroformate resulted in the formation of the new pyrido[4′,3′:4,5]thieno[2,3‐d][1,3,4]thiadiazolo[3,2‐a]pyrimidine derivatives 12–15 . © 2002 Wiley Periodicals, Inc. Heteroatom Chem 13:280–286, 2002; Published online in Wiley Interscience (www.interscience.wiley.com). DOI 10.1002/hc.10030     

Synthesis and cytotoxic activity of benzo[a]pyrano[3,2-h] and [2,3-i]xanthone analogues of psorospermine, acronycine, and benzo[a]acronycine

Condensation of 2-hydroxy-1-naphthalenecarboxylic acid with phloroglucinol afforded 9,11-dihydroxy-12H-benzo[a]xanthen-12-one (6). Construction of an additional dimethylpyran ring onto this skeleton, by alkylation with 3-chloro-3-methyl-1-butyne followed by Claisen rearrangement, gave access to 6-hydroxy-3,3-dimethyl-3H,7H-benzo[a]pyrano[3,2-h]xanthen-7-one (12) and 5-hydroxy-2,2-dimethyl-2H,6H-benzo[a]pyrano[2,3-i]xanthen-6-one (13), which were methylated into 6-methoxy-3,3-dimethyl-3H,7H-benzo[a]pyrano[3,2-h]xanthen-7-one (14) and 5-methoxy-2,2-dimethyl-2H,6H-benzo[a]pyrano[2,3-i]xanthen-6-one (15), respectively. Osmium tetroxide oxidation of 14 and 15 gave the corresponding (+/-)-cis-diols 16 and 17, which afforded the corresponding esters 18-21 upon acylation. Similarly, condensation of 2-hydroxy-1-naphthalenecarboxylic acid with 3,5-dimethoxyaniline gave 11-amino-9-methoxy-12H-benzo[a]xanthen-12-one (23) which was converted into 11-amino-9-hydroxy-12H-benzo[a]xanthen-12-one (24) upon treatment with hydrogen bromide in acetic acid. Alkylation with 3-chloro-3-methyl-1-butyne followed by Claisen rearrangement afforded 6-amino-3,3-dimethyl-3H,7H-benzo[a]pyrano[3,2-h]xanthen-7-one (25) and 5-amino-2,2-dimethyl-2H,6H-benzo[a]pyrano[2,3-i]xanthen-6-one (26). The new benzopyranoxanthone derivatives only displayed marginal antiproliferative activity when tested against L1210 and KB-3-1 cell lines. The only compounds found significantly active against L1210 cell line, 16 and 20, belong to the benzo[a]pyrano[3,2-h]xanthen-7-one series, which possess a pyran ring fused angularly onto the xanthone basic core.     

The Ritter reaction in the synthesis of ortho-fused nitrogen-containing heterocycles

The acid-catalysed condensation of a 1,4- and a 1,5-ditertiary diol with various arylated nitriles is shown to provide a simple and novel route to reduced benz[f]indoles, naphth[1,8a,8-fg]indoles, benzo[4,5]cyclohepta[1,2-b]pyrroles, and benzo[g]quinolines.     

Synthesis and cytotoxicity of 9-(2-deoxy-2-alkyldithio-beta-D-arabinofuranosyl)purine nucleosides which are stable precursors to potential mechanistic probes of ribonucleotide reductases

A series of 2[prime or minute]-thionucleosides, as potential inhibitors of ribonucleotide reductases, has been synthesized. Treatment of the 3[prime or minute],5[prime or minute]-O-TPDS-2[prime or minute]-O-(trifluoromethanesulfonyl)adenosine with potassium thioacetate gave the arabino epimer of 2[prime or minute]-S-acetyl-2[prime or minute]-thioadenosine which was deacetylated to give 9-(3,5-O-TPDS-2-thio-[small beta]-d-arabinofuranosyl)adenine in high yield. Treatment of the latter with diethyl azodicarboxylate-C(3)H(7)SH-THF gave 2[prime or minute]-propyl disulfide which was desilylated to give 9-(2-deoxy-2-propyldithio-[small beta]-d-arabinofuranosyl)adenine. Subsequent tosylation (O5[prime or minute]) and displacement of the tosylate with pyrophosphate afforded the 5[prime or minute]-O-diphosphate in a stable form as propyl mixed-disulfide, which upon treatment with dithiothreitol releases 9-(2-thio-[small beta]-d-arabinofuranosyl)adenine 5[prime or minute]-diphosphate. The arabino 2[prime or minute]-mercapto group might interact with the crucial thiyl radical at cysteine 439 leading to the inhibition of ribonucleotide reductases via formation of a Cys439-2[prime or minute]-mercapto disulfide bridge. The 2,6-diamino-, 2-amino-6-chloro- and 2-amino-6-methoxypurine ribosides were also converted to the corresponding 2[prime or minute]-deoxy-2[prime or minute]-propyldithio-[small beta]-d-arabinofuranosyl nucleosides, which might serve as convenient precursors to the arabino epimer of 2[prime or minute]-thioguanosine. Analogously, 2[prime or minute]-deoxy-2[prime or minute]-propyldithioadenosine was prepared from 9-([small beta]-d-arabinofuranosyl)adenine. The nucleoside disulfides show modest cytotoxicity in a panel of human tumor cell lines.     

Structure and conformational equilibrium of thiacalix[4]arene by density functional theory

Density functional theory calculations for the structure and conformational equilibrium of thiacalix[4]arene are reported. The conformational equilibrium of thiacalix[4]arene, a heterocalixarene in which the phenol groups are bridged by sulphur atoms is compared to the conformational equilibrium of calix[4]arene. Thiacalix[4]arene conformational energies relative to the cone conformer (ΔE's) are reduced in comparison with calix[4]arene. This conformational change is in qualitative agreement with recent NMR spectroscopy measurements of the conformational equilibrium for a tetraethylether of thiacalix[4]arene in a CDCl₃ solution which indicates an enhanced chemical exchange of thiacalixarene conformers in comparison with similar methylene bridged structures. Density functional theory results for the structure of thiacalix[4]arene are in good agreement with recent X-ray diffraction measurements. The electrostatic potentials in the cone conformers of thiacalix[4]arene and calix[4]arene suggest that their complexation or recognition abilities can be significantly different. Dipole moments of the four thiacalix[4]arene conformers are in the order: cone>1,2-alternate>partial-cone>1,3-alternate.     

Synthesis and characterization of novel Schiff bases containing pyrimidine unit

The work involves synthesis of novel Schiff base derivatives containing a pyrimidine unit starting with chalcones. 4-Aminoacetophenone was reacted with 4-nitrobenzaldehyde or 4-chlorobenzaldehyde in basic medium giving chalcones, [I]_a and [I]_b, respectively, by Claisen-Schemidt reaction. The chalcones [I]_a and [I]_b were reacted with urea in HCl medium giving oxopyrimidines, [II]_a and [II]_b. They were also reacted with thiourea in basic medium to give thioxopyrimidines, [III]_a and [III]_b. The novel mono and bis Schiff bases, [VIII]_na, [VIII]_nb, [IX]_na, [IX]_nb, [X]_na, [X]_nb, [XI]_na, and [XI]_nb were synthesized by the reaction of pyrimidine derivatives; oxopyrimdines, [II]_a and [II]_b and thioxopyrimidines, [III]_a and [III]_b with 4-(4′-n-alkoxybenzoloxy)benzaldehyde [VI] and polymethylene-α,ω-bis-4-oxybenzaldehydes [VII]_m, respectively, in dry benzene using drops of glacial acetic acid as a catalyst. The synthesized compounds were characterized by melting points, elemental analysis, FTIR, and ¹H NMR spectroscopy.     

Proton-induced cis-trans conversion of a platinum(II) center coordinated by L-cysteinatocobalt(III) metalloligands

Treatment of LambdaL-[Co(L-cys-N,S)(en)2]+ (l-H2cys = L-cysteine) with [PtCl4]2- in water, followed by the addition of acid, gave an S-bridged CoIII2PtII trinuclear complex ([1]4+), which was reversibly converted to its deprotonated complex ([2]2+) in an aqueous solution. While [1]4+ formed only a trans isomer, [2]2+ existed as a mixture of trans and cis isomers. The selective formation of a cis isomer was achieved by treatment of [1]4+ or [2]2+ with phthalic acid in water, which afforded a unique CoIII4PtII2 hexanuclear complex ([3]4+). Complex [3]4+ was reverted back to [1]4+ by treatment with aqueous HCl, accompanied by the complete cis-to-trans conversion.     

Cycloadditions of 1-iminylphosphirane complexes with allenes

A cascade carbonylative ring expansion and [2+2]/[4+2] cycloaddition of strained 1-iminylphosphirane complexes with aryl allenes were reported.The carbonylative ring expansion of 1-iminylphosphirane complexes provides an azaphosphacyclohexone complex intermediate with a C=P double bond.The following [2+2] or dearomatic [4+2] cycloaddition of this intermediate with allenes is modulated by the aryl substituents on the imino carbon.The regioselective [2+2] cycloaddition with 1,1-diarylallene provides an entry to bicyclo[4.2.0]octan-4-one skeletons featuring a four-membered phosphacyclobutane moiety.While dearomatic [4+2] cycloaddition was preferred with less aromatic naphthalene and yielded octahydrochrysene skeleton containing heteroatoms.     

The coordination chemistry of "[BP3]NiX" platforms: targeting low-valent nickel sources as promising candidates to L3Ni=E and L3Ni(triple bond)E linkages

A series of divalent, monovalent, and zerovalent nickel complexes supported by the electron-releasing, monoanionic tris(phosphino)borate ligands [PhBP3] and [PhBPiPr3] ([PhBP3] = [PhB(CH2PPh2)3]-, [PhBPiPr3] = [PhB(CH2PiPr2)3]-) have been synthesized to explore fundamental aspects of their coordination chemistry. The pseudotetrahedral, divalent halide complexes [PhBP3]NiCl (1), [PhBP3]NiI (2), and [PhBPiPr3]NiCl (3) were prepared by the metalation of [PhBP3]Tl or [PhBPiPr3]Tl with (Ph3P)2NiCl2, NiI2, and (DME)NiCl2 (DME = 1,2-dimethoxyethane), respectively. Complex 1 is a versatile precursor to a series of complexes accessible via substitution reactions including [PhBP3]Ni(N3) (4), [PhBP3]Ni(OSiPh3) (5), [PhBP3]Ni(O-p-tBu-Ph) (6), and [PhBP3]Ni(S-p-tBu-Ph) (7). Complexes 2-5 and 7 have been characterized by X-ray diffraction (XRD) and are pseudotetrahedral monomers in the solid state. Complex 1 reacts readily with oxygen to form the four-electron-oxidation product, [[PhB(CH2POPh2)2(CH2PPh2)]NiCl] (8A or 8B), which features a solid-state structure that is dependent on its method of crystallization. Chemical reduction of 1 using Na/Hg or other potential 1-electron reductants generates a product that arises from partial ligand degradation, [PhBP3]Ni(eta2-CH2PPh2) (9). The more sterically hindered chloride 3 reacts with Li(dbabh) (Hdbabh = 2,3:5,6-dibenzo-7-azabicyclo[2.2.1]hepta-2,5-diene) to provide the three-coordinate complex [kappa2-PhBPiPr3]Ni(dbabh) (11), also characterized by XRD. Chemical reduction of complex 1 in the presence of L-type donors produces the tetrahedral Ni(I) complexes [PhBP3]Ni(PPh3) (12) and [PhBP3]Ni(CNtBu) (13). Reduction of 3 following the addition of PMe3 or tert-butyl isocyanide affords the Ni(I) complexes [PhBPiPr3]Ni(PMe3) (14) and [PhBPiPr3]Ni(CNtBu) (15), respectively. The reactivity of these [PhBP3]NiIL and [PhBPiPr3]NiIL complexes with respect to oxidative group transfer reactions from organic azides and diazoalkanes is discussed. The zerovalent nitrosyl complex [PhBP3]Ni(NO) (16) is prepared by the reaction of 1 with excess NO or by treating 12 with stoichiometric NO. The anionic Ni(0) complexes [[kappa2-PhBP3]Ni(CO)2][nBu4N] (17) and [[kappa2-PhBPiPr3]Ni(CO)2][ASN] (18) (ASN = 5-azoniaspiro[4.4]nonane) have been prepared by reacting [PhBP3]Tl or [PhBPiPr3]Tl with (Ph3P)2Ni(CO)2 in the presence of R4NBr. The photolysis of 17 appears to generate a new species consistent with a zerovalent monocarbonyl complex which we tentatively assign as [[PhBP3]Ni(CO)][nBu4N], although complete characterization of this complex has been difficult. Finally, theoretical DFT calculations are presented for the hypothetical low spin complexes [PhBP3]Ni(NtBu), [PhBPiPr3]Ni(NtBu), [PhBPiPr3]Ni(NMe), and [PhBPiPr3]Ni(N) to consider what role electronic structure factors might play with respect to the relative stability of these species.     

离子液体对稠油的改质降黏作用影响因素研究

合成了烷基咪唑型离子液体\[BMIM\]\[AlCl₄\],研究了稠油含硫量、含水量、过渡金属盐、温度等对离子液体进行稠油改质降黏作用的影响。实验结果表明,稠油含一定硫量是进行稠油改质降黏的必要条件。用\[BMIM\]\[AlCl₄\]离子液体对稠油进行有效的改质降黏时,稠油含水量应小于10%。环烷酸镍(NiNaph）与离子液体复配使用对稠油改质降黏具有增效作用。用质量分数为5%的\[BMIM\]\[AlCl₄\]离子液体在一定条件下处理新疆稠油,可使稠油降黏率达到60%,沥青质降低78%。用\[BMIM\]\[AlCl₄\] 离子液体对新疆稠油进行改质降黏的最佳温度为65℃~85℃。     

Novel network polymers based on calixresorcinarenes

The novel network polymers 2a-2d based on calix[4]resorcinarene derivatives were obtained with yields 2a: 80%, 2b: 90%, 2c: 70%, 2d: 70%. Polymers 2a and 2b containing fragments of tetramethylcalix[4]resorcinarene or tetraphenylcalix[4]resorcinarene as a repeating units were synthesized by condensation cis-tetramethylcalix[4]resorcinarene or cis-tetraphenylcalix[4]resorcinarene with formaldehyde. Polymers 2c and 2d containing fragments of furylcalix[4]resorcinarene were obtained by condensation of formaldehyde with products of calix[4]resorcinarene and furfural interaction. The IR spectra and sorption properties of the polymers were researched. It is found out that 2a-2d can participate in the cation-exchange reaction.