Gas chromatography of 209 polychlorinated biphenyl congeners on an extremely efficient nonselective capillary column

The gas chromatographic–mass spectrometric (GC–MS) separation of all 209 polychlorinated biphenyl (PCB) congeners was studied on an extremely efficient 80 m × 0.1 mm i.d. capillary column coated with a 0.1 μm film of poly(5%-phenyl methyl)siloxane stationary phase. The quality of the separation and the number of resolved and coeluting peaks were compared to predictions according to the statistical overlap theory (SOT) and to literature data on PCB separations obtained by one-dimensional and comprehensive two-dimensional GC (GC × GC) and GC–MS. Mass spectral and chemometric deconvolution procedures were used to resolve overlapping peaks. On the highly efficient column, 195 PCB congeners were resolved in 96 min separation time using spectral and chemometric deconvolution. This number is comparable to the best separations described in GC × GC–MS mode. The novel method was developed for spectral deconvolution of overlapped PCB congeners which was verified determining the most toxic, dioxin-like PCBs both in the model mixture of 209 PCBs as well as in the Aroclor 1242 and Aroclor 1254 formulations.     

Use of a polar ionic liquid as second column for the comprehensive two-dimensional GC separation of PCBs

The orthogonality of three columns coupled in two series was studied for the congener specific comprehensive two-dimensional GC separation of polychlorinated biphenyls (PCBs). A non-polar capillary column coated with poly(5%-phenyl–95%-methyl)siloxane was used as the first (¹D) column in both series. A polar capillary column coated with 70% cyanopropyl-polysilphenylene-siloxane or a capillary column coated with the ionic liquid 1,12-di(tripropylphosphonium)dodecane bis(trifluoromethane-sulfonyl)imide were used as the second (²D) columns. Nine multi-congener standard PCB solutions containing subsets of all native 209 PCBs, a mixture of 209 PCBs as well as Aroclor 1242 and 1260 formulations were used to study the orthogonality of both column series. Retention times of the corresponding PCB congeners on ¹D and ²D columns were used to construct retention time dependences (apex plots) for assessing orthogonality of both columns coupled in series. For a visual assessment of the peak density of PCBs congeners on a retention plane, 2D images were compared. The degree of orthogonality of both column series was, along the visual assessment of distribution of PCBs on the retention plane, evaluated also by Pearson's correlation coefficient, which was found by correlation of retention times t_R,i,2D and t_R,i,1D of corresponding PCB congeners on both column series. It was demonstrated that the apolar + ionic liquid column series is almost orthogonal both for the 2D separation of PCBs present in Aroclor 1242 and 1260 formulations as well as for the separation of all of 209 PCBs. All toxic, dioxin-like PCBs, with the exception of PCB 118 that overlaps with PCB 106, were resolved by the apolar/ionic liquid series while on the apolar/polar column series three toxic PCBs overlapped (105 + 127, 81 + 148 and 118 + 106).     

Comprehensive two-dimensional gas chromatography of the 209 polychlorinated biphenyls

Comprehensive two-dimensional gas chromatography (GC x GC) of the 209 polychlorinated biphenyls (CBs) was carried out using a longitudinally modulated cryogenic system (LMCS) and liquid carbon dioxide as cryogen. The effluent from a non-polar column was modulated and further separated on either a polar or a shape-selective second-dimension column. Five GC x GC column combinations were evaluated, with DB-XLB as the first column in each case. DB-XLB separates more congeners than any other GC column currently available. When combined with a biscyanopropyl siloxane (SP-2340 or BPX70) or smectic liquid crystal (LC-50) second-dimension column in a GC x GC system many additional CBs can be separated. In total, 176 and 181 of the 209 congeners were separated (Rs = 0.5) on the column combinations DB-XLB/SP-2340 and DB-XLB/LC-50, respectively. Of the 136 CBs present in any Aroclor mixture at concentrations greater than 0.05% (w/w), 126 were resolved using either of these two column combinations. The seven frequently measured CBs 28, 52, 101, 118, 138, 153, 180, and the WHO-PCBs 77, 81, 105, 114, 118, 123, 126, 156. 157, 167, 169 and 189 were all separated from Aroclor CBs on the DB-XLB/LC-50 column set, whereas CBs 118 and 131 coeluted on the DB-XLB/SP-2340 column set. In addition, three technical CB formulations (Aroclors 1232, 1248 and 1260) and a seal blubber sample (Halichoerus grypus) from the Baltic Sea were analyzed. Similar peak patterns were found for Aroclor 1260 and the CBs in the seal blubber, facilitating use of this technical CB formulation to identify the CBs in the blubber by GC x GC. Individual CBs in environmental samples, such as seal blubber, may be identified semi-automatically by matching the samples GC x GC profiles to a template generated using a standard containing all 209 CBs. Using such a template, 64 CBs were identified in the grey seal blubber sample.     

Qualitative evaluation of thermal desorption-programmable temperature vaporization-comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry for the analysis of selected halogenated contaminants

The separation of 38 toxic and predominant polychlorinated biphenyl (PCB) congeners, 11 persistent halogenated pesticides, 1 brominated biphenyl (BB), and 8 polybrominated diphenyl ethers (PBDEs) has been optimized using comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry (GC x GC-TOFMS). A thermal desorption-programmable temperature vaporization (TD-PTV) step was used for the injection. Different column sets were investigated, and a 100% dimethylpolysiloxane (15 m x 0.25 mm i.d. x 0.25 microm film thickness) narrowbore capillary column coupled to a high temperature (8% phenyl)-polycarborane-siloxane (2 m x 0.10 mm i.d. x 0.10 microm film thickness) microbore column set was selected. Of the 58 compounds investigated, only one pair of PCBs was not resolved. All other analytes were either baseline separated into the chromatographic plane or were virtually separated using the deconvolution capability of the TOFMS.     

Fast gas chromatography-time-of-flight mass spectrometry of polychlorinated biphenyls and other environmental contaminants

Practical applications of fast gas chromatography (GC) with time-of-flight mass spectrometry (TOFMS) are presented. A narrow-bore column (0.10-mm i.d.) is used to analyze over 100 specific polychlorinated biphenyl congeners in an Aroclor mix and a sediment sample in 10.5 min. Sample preparation is minimized for the sediment to more closely match the speed advantage gained by using fast GC-TOFMS. The possibility of using a 0.53-mm-i.d. column operated under vacuum-outlet conditions for fast GC-TOFMS is established for Aroclors and a suite of environmental contaminants. Fast acquisition rates and automated peak-find and spectral deconvolution capabilities are demonstrated for TOFMS.     

Development of a quantification methodology for polychlorinated biphenyls by using Kanechlor products as the secondary reference standard

Kanechlor (KC)-300, 400, 500 and 600, Japanese polychlorinated biphenyl (PCB) products, and their equivalent mixture were analyzed by using a gas chromatograph (GC) equipped with an SE-54 capillary column/electron capture detector (ECD) and a GC/mass spectrometer in the selected ion monitoring mode (MS-SIM). All peaks were assigned to the composing congeners based on the data on peak assignment of Clophen A-30, 40, 50, 60 and Aroclor 1016, 1242, 1254, 1260 [1] and on the relative retention time values of 209 PCB congeners [2]. The weight percentage of the congener(s) which corresponds to each peak in the mass chromatograms was calculated by comparison of its height with that of certified reference standard with the same molecular weight. Each weight percentage of PCB congener(s) corresponding to each ECD peak was obtained by summing up the percent contribution values of the PCB congeners co-eluting. The results showed that it was possible to use KC products and their equivalent mixture as secondary reference standards for congener-specific PCB quantification.     

非等间隔PCBs保留指数体系在光解行为研究中的应用

利用Ｃｈｕ等已建立的多氯联苯（ＰＣＢｓ）非等间隔保留指数体系,由文献中的相对保留时间计算出全部２０９种ＰＣＢｓ同类物（Ｃｏｎｇｅｎｅｒ）的保留指数（ＩＰＣＢ）。利用ＩＰＣＢ结合ＧＣ－ＭＳ对ＰＣＢ８７、ＰＣＢ１３８和ＰＣＢ１６９三种同类物的光解产物进行了定性分析,发现其光解产物主要为低氯代联苯。实验结果证明,非等间隔保留指数体系ＩＰＣＢ在ＰＣＢｓ同类物的定性分析中具有准确、实用、快捷、方便等优点。     

Characterization of three Aroclor mixtures using a new cyanobiphenyl stationary phase

The retention characteristics of all 209 polychlorinated biphenyl (PCB) congeners were determined on a new p,p-cyanobiphenyl stationary phase using gas chromatography with electron capture detection (GC-ECD). Response factors were determined relative to decachlorobiphenyl, PCB 209. Several congeners that coelute on the phases routinely used for PCB analysis are separated on this phase, including the hexachlorobiphenyls 138, 163, and 164. The p,p-cyanobiphenyl stationary phase exhibits altered retention for planar congeners, such that the toxic coplanar PCBs 77, 126, and 169 are eluted free from interference. Of the 209 congeners, 61 were separated using the p,p-cyanobiphenyl phase in conjunction with GC-ECD. When analyzed by gas chromatography with mass selective detection (GC-MSD), the number of congeners determined increased to 133. Therefore GC-MSD was used with the p,p-cyanobiphenyl phase to characterize three PCB mixtures: Aroclor 1242, Aroclor 1254, and Aroclor 1260.     

Determination of PCBs in tetrachlorinated quinone using gas chromatography with electron capture detection

A simple, sensitive method for determining polychlorinated biphenyl (PCB) congeners in industrial product 2,3,5,6-tetrachloro-1,4-benzoquinone with GC/ECD detection has been developed. The method based on liquid-liquid extraction from tetrachlorinated quinone dissolved in N,N-dimethylformamide was found to be efficient for the determination of the levels of the investigated pollutants. A series of extraction and purification steps were designed for the sample pretreatment. The congener specific averages of recoveries were 82-96% for Aroclor 1242 and 1254 at a total spiking level of ca. 0.4 mug g(-1) sample. The reproducibilities of replicate determinations of different congeners were typically 5-19% except one with the average 13% R.S.D. (n=3). This method was applied to evaluate the background levels of PCBs in tetrachloro-1,4-benzoquinone, of which the corresponding PCB levels varied from 0.014 to 1.5 mug g(-1).     

Chiral comprehensive two-dimensional gas chromatography with electron-capture detection applied to the analysis of chiral polychlorinated biphenyls in food samples

The feasibility of comprehensive two-dimensional gas chromatography with electron-capture detection (GC x GC-ECD) for the enantioseparation of chiral PCBs from other possible interfering compounds has been evaluated. Three commercially available enantioselective beta-cyclodextrin-based capillary columns (Chirasil-Dex, BGB-172 and BGB-176SE) have been tested as first-dimension columns. Three non-enantioselective stationary phases (HT-8, BPX-50 and Supelcowax-10) were combined with the enantioselective columns to allow the unambiguous determination of the enantiomers of the target chiral PCBs. Each enantioselective first-dimension column tested was able to separate into enantiomers different PCB congeners, but in all cases, the use of Supelcowax-10 as second-dimension column provided the most satisfactory results. The Chirasil-Dex x Supelcowax-10 column combination allowed the determination of the enantiomeric fraction (EF) of PCBs 84, 91, 95, 132, 136, 149, 174 and 176 in the working standard solution, while that of congener 135 was hindered. The BGB-172 x Supelcowax-10 column set allowed a proper EF determination of congeners 45, 84, 131, 132, 135, 171, 174 and 183, while that of PCB 91 was interfered with co-elutants. The column combination BGB-176SE x Supelcowax-10 allowed the determination of all congeners that this enantioselective stationary phase was able to separate into enantiomers, i.e. PCBs 45, 91, 95, 136, 149 and 176. These column combinations have also been evaluated for the simultaneous determination of the 12 congeners with a toxic equivalency factor assigned by the WHO (PCBs 77, 81, 105, 114, 118, 123, 126, 156, 157, 167, 169, 189) and the seven indicator congeners (PCBs 28, 52, 101, 118, 138, 153 and 180), and evaluated for the analysis of food samples.     

Multidimensional capillary gas chromatography of polychlorinated biphenyl marker compounds

Multidimensional chromatography was used to resolve the specific chlorobiphenyl (CB) congeners 28, 52, 101, 118, 138, 153, and 180 in technical aroclor standards. Single column analysis of polychlorinated biphenyls (PCBs) results in co-elution of key congeners with other components in the mixture; therefore using two columns of different selectivity was necessary to enhance the resolution achievable on just one column. The HT8 column (8% phenylpolycarborane-siloxane phase) has been reported to have specific selectivity characteristics for improved PCB separation. When coupled with a BPX5 column (5% phenylpolysiloxane-silphenylene phase), it has been shown here to provide unambiguous identification of 7 marker compounds which are used to monitor PCB occurrence and distribution. All seven marker CBs are present in aroclor 1254, and by adjusting the size of the heartcut window, it was possible to obtain resolution of the marker congeners from other congeners. Single column analysis is unable to achieve this result. This offers an alternative to GC-MS analysis.     

Enantiomeric separation of chiral polychlorinated biphenyls on beta-cyclodextrin capillary columns by means of heart-cut multidimensional gas chromatography and comprehensive two-dimensional gas chromatography. Application to food samples

Three commercially available chiral capillary columns, Chirasil-Dex, BGB-176SE, and BGB-172, have been evaluated for the separation into enantiomers of the 19 chiral polychlorinated biphenyls (PCB) congeners stable at room temperature. The enantiomers of 15 chiral PCBs were, at least to some extent, separated using these beta-cyclodextrin based columns. Multidimensional techniques, such as heart-cut multi-dimensional gas chromatography (heart-cut MDGC) and comprehensive two-dimensional gas chromatography (GC x GC), were investigated for their ability to solve coelution problems with other PCBs present in commercial mixtures and real-life samples. Heart-cut MDGC improved the separation as compared to one-dimensional GC, and enantiomeric fractions of the investigated chiral PCBs could be determined free from interferences. However, limitations on the number of target compounds that can be transferred to the second column in a single run and, therefore, the time consumption, have led to the evaluation of GC x GC as an alternative for this type of analysis. With GC x GC, two column set-ups were tested, both having a chiral column as first-dimension column, and two different polar stationary phase columns in the second dimension. On using both column combinations, congeners 84, 91, 95, 132, 135, 136, 149, 174, and 176 could be determined free from coelutions with other PCBs. Results on the application of heart-cut MDGC to food samples such as milk and cheese are given, as well as the first results on the application of GC x GC to this type of samples.     

HRGC separation of PCB congeners

High resolution gas chromatography has greatly changed the field of polychlorinated biphenyl (PCB) analysis. From a rough estimation of the total PCB concentration on packed column GC, the development of commercially available fused silica capillary columns in the late 1970s and early 1980s has advanced the analysis of PCBs to a point where they can be accurately measured as separated congeners. The state-of-the-art of PCB analysis in the 1990s is routine isomer-specific analysis with multi-column techniques using long (<50 m) narrow (> 0.25 mm) columns. A broad spectrum of commercially available stationary phases have been completely characterized with regard to their PCB elution profiles.     

Real-time immuno-PCR assay for detecting PCBs in soil samples

A fast and robust assay, based on immuno-polymerase chain reaction (IPCR) techniques, was developed for the detection of polychlorinated biphenyls (PCBs) in soil samples. Real-time IPCR (rt-IPCR) is a powerful technique that combines enzyme-linked immunosorbent assay (ELISA) with the specificity and sensitivity of PCR. In our assay, indirect ELISAs based on immobilization of PCB37 hapten–ovalbumin conjugates was used for evaluation of the immune response. The effect of optimal reagent concentrations to reduce background fluorescence was also investigated. Using the optimized assay, the linear sensitivity range of the assay covered more than six orders of magnitude, and the minimum detection limits reached 5 fg ml^–1 antigen. Rt-IPCR was tested for its cross-reactivity profiles using four selected congeners and four Aroclor products. The assays were highly specific for congeners but less specific for Aroclor1242. We took four soil samples to validate the method, and the results were confirmed by gas chromatography/mass spectrometry (GC/MS). The rt-IPCR results for soil samples correlated well with the concentrations of PCBs obtained by GC/MS (r = 0.99, n = 6). These data indicate that this highly specific, sensitive, and robust assay can be modified for detecting PCB compounds in the environment.     

Ratios of PCB 138, PCB 163, and PCB 164 in aroclor mixtures

The gas chromatographic separation of PCB 138, PCB 163, and PCB 164 in Aroclor mixtures can be achieved by application of a CP-Select for PCBs stationary phase. In technical PCB mixtures with a degree of chlorination exceeding 40% (Aroclor 1242, 1254, 1260, and 1262) these three hexa-chlorobiphenyls were present. The highest concentrations of the PCBs under investigation were found in Aroclor 1260. The ratio PCB 163: PCB 138 increased with an increasing degree of chlorination of technical PCB mixtures.     

Characterization of Losses of Chlorinated Pollutants during Lyophilization of Mussels

The influence of the lyophilization process on the recovery of ten organochlorine compounds, (9 polychlorinated biphenyls (PCBs) and pp′-DDE [1,1-dichloro-2,2-bis(p-chlorophenyl)ethylene)] during the pretreatment step of mussels was studied at three concentration levels. Losses of more polar and water-soluble compounds were approximately 50% in samples pulverized prior to lyophilization. Two variables, moisture and lipid concentrations, had statistical influences in the losses of the lower chlorinated compounds (CB 31 and CB 28). In some PCB congeners (CB 52, CB 101, and CB 118), the variation of losses with the PCB concentrations was also statistically significant.     

Gas chromatographic separation of polychlorinated biphenyls on a new apolar capillary column

Eighty one polychlorinated biphenyls (PCBs) and nineteen chlorinated pesticide standards have been analyzed on a newly developed apolar high resolution gas chromatography (HRGC) column. Emphasis was placed on the determination of PCB indicator congeners which are part of national regulations, and of toxic coplanar PCB congeners. The new column enables almost unambiguous quantification of the PCB indicator congeners (PCB 138 can be separated from both PCB 163 and PCB 164; PCB 28 and PCB 31 were also separated and no coelution was observed for PCB 52, PCB 118, and PCB 180). The new column furnished better results than CP-Sil 8 for the analysis of PCB indicator congeners in a sample of seal blubber.     

Polychlorinated biphenyls,dibenzo-p-dioxins and dibenzofurans in soil samples from airport areas of Croatia

Levels and patterns of polychlorinated biphenyls (PCBs) were studied in surface soil samples collected in the coastal part of Croatia within and surrounding four different airports and in the vicinity of two partially devastated electrical transformer stations. The compounds accumulated from air-dried soil samples by multiple ultrasonic extraction with an n-hexane?:?acetone 1?:?1 mixture were analysed by capillary gas chromatography with electron capture and ion-trap detection. PCBs were quantified against a standard Aroclor 1242/Aroclor 1260 mixture and a standard mixture of 17 individual PCB congeners (IUPAC No.: 28, 52, 60, 74, 101, 105, 114, 118, 123, 138, 153, 156, 157, 167, 170, 180, and 189). The mass fractions of total PCBs in 18 soil samples collected within the airport premises ranged from 3 to 41?327?µg/kg dry weight (dw) (median: 533?µg/kg?dw), and those in 21 samples collected at a distance ranging from several metres to 5?km away from the airport fence, from <1 to 39?µg/kg?dw (median: 5?µg/kg?dw). The highest PCB levels were determined in soils along the airport aprons where the aircrafts were serviced and refuelled. The PCB pattern was very similar to technical Aroclor 1260 in all airport soils. The PCB pattern in 22 soils collected in the vicinity of electrical transformer stations was dominated by congeners contained in Aroclor 1242. These soils contained 7 to >400?µg/kg?dw of total PCBs. One highly PCB-contaminated airport soil sample was analysed for polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs). With an international toxic equivalent (I-TEQ) of 9.7?ng/kg?dw, the airport soil contamination was within values typical for urban and rural areas, and the congener patterns gave no clear indication for PCBs as the only source of PCDDs/PCDFs.     

Improved Procedure for Single DB-XLB Column GC-MS-SIM Quantitation of PCB Congener Distributions and Characterization of Two Different Preparations Sold as “Aroclor 1254”

Complete PCB congener distributions in a panel of Aroclor mixtures were previously obtained by combining data from several HRGC systems. In that study quantitation of minor components may have been unreliable due to single level calibration against high levels of individual congener standards. Two lots of Aroclor 1254 had markedly different congener distributions. In this study, the design and performance of a congener-specific PCB analysis method employing GC-MS-SIM detection of congeners separated on a DB-XLB capillary column are discussed. Quantitation is carried out against a 6-level inclusive standard curve of a mixture of 144 congeners found in Aroclors. A separate procedure to measure trace levels of PCB 126 in Aroclors using the same system, combined with levels initially acquired for other congeners, facilitates estimation of TEQ values (Toxic Equivalencies of the PCB mixtures to 2,3,7,8-TCDD). PCB congener profiles of 15 Aroclor 1254 mixtures are presented. These profiles show that the less common, high TEQ variety of Aroclor 1254 was manufactured by an atypical, two-stage chlorination process that was apparently used during the final 1% of Aroclor 1254 production (ca. 1974–1976).     

Determination of 26 polychlorinated biphenyls congeners in soil samples using microwave-assisted extraction with open vessel and gas chromatography

A procedure focused on microwave-assisted extraction in open vessel (MAE-OV) and gas chromatography with electron capture detection (GC-ECD) was used for the determination of 26 congeners of polychlorinated biphenyls (PCBs) in soil samples. The limit of detection (LOD) and limit of quantification (LOQ) were evaluated for commercial PCBs mixture Aroclor1260. LOD and LOQ were calculated for each PCB congener, in the ranges (0.03–0.27?ng?g^?1) and (0.11–0.70?ng?g^?1), respectively. After optimization, 26 PCBs congeners were successfully extracted from soil samples with recovery amounts ranging between 84.7% and 117.3% for all PCBs congeners. The evaluated method of MAE-OV showed good separation and extraction of all PCBs congeners from soil samples. Extraction parameters such as solvent choice, power and extraction time were investigated. This study indicated that MAE-OV could be an interesting alternative method to extract PCBs from soils, since it is economical, easy, fast and requires low amounts of solvents.