Thermolytic properties of 3-(2-pyridyl)-1-propyl and 2-[N-methyl-N-(2-pyridyl)]aminoethyl phosphate/thiophosphate protecting groups in solid-phase synthesis of oligodeoxyribonucleotides

Thermolytic groups may serve as alternatives to the conventional 2-cyanoethyl group for phosphate/thiophosphate protection in solid-phase oligonucleotide synthesis to prevent DNA alkylation by acrylonitrile generated under the basic conditions used for oligonucleotide deprotection. Additionally, thermolytic groups are attractive in the context of engineering a "heat-driven" process for the synthesis of oligonucleotides on diagnostic microarrays. In these regards, the potential application of pyridine derivatives as thermolytic phosphate/thiophosphate protecting groups has been investigated. Specifically, 2-pyridinepropanol and 2-[N-methyl-N-(2-pyridyl)]aminoethanol were incorporated into deoxyribonucleoside phosphoramidites 7a-d and 9, which were found as efficient as 2-cyanoethyl deoxyribonucleoside phosphoramidites in solid-phase oligonucleotide synthesis. Whereas the removal of 3-(2-pyridyl)-1-propyl phosphate/thiophosphate protecting groups from oligonucleotides is effected within 30 min upon heating at 55 degrees C in concentrated NH4OH or in an aqueous buffer at pH 7.0, cleavage of 2-[N-methyl-N-(2-pyridyl)]aminoethyl groups occurs spontaneously when their phosphate or phosphorothioate esters are formed during oligonucleotide synthesis. The deprotection of these groups follows a cyclodeesterification process generating the bicyclic salts 13 and 14 as side products. These salts do not alkylate or otherwise modify any DNA nucleobases and do not desulfurize a phosphorothioate diester model under conditions mimicking large-scale oligonucleotide deprotection.     

The 3-(N-tert-butylcarboxamido)-1-propyl group as an attractive phosphate/thiophosphate protecting group for solid-phase oligodeoxyribonucleotide synthesis

Among the various phosphate/thiophosphate protecting groups suitable for solid-phase oligonucleotide synthesis, the 3-(N-tert-butylcarboxamido)-1-propyl group is one of the most convenient, as it can be readily removed, as needed, under thermolytic conditions at neutral pH. The deprotection reaction proceeds rapidly (t(1/2) approximately 100 s) through an intramolecular cyclodeesterification reaction involving the amide function and the release of the phosphate/thiophosphate group as a 2-(tert-butylimino)tetrahydrofuran salt. Incorporation of the 3-(N-tert-butylcarboxamido)-1-propyl group into the deoxyribonucleoside phosphoramidites 1a-d is achieved using inexpensive raw materials. The coupling efficiency of 1a-d in the solid-phase synthesis of d(ATCCGTAGCTAAGGTCATGC) and its phosphorothioate analogue is comparable to that of commercial 2-cyanoethyl deoxyribonucleoside phosphoramidites. These oligonucleotides were phosphate/thiophosphate-deprotected within 30 min upon heating at 90 degrees C in Phosphate-Buffered Saline (PBS buffer, pH 7.2). Since no detectable nucleobase modification or significant phosphorothioate desulfurization occurs, the 3-(N-tert-butylcarboxamido)-1-propyl group represents an attractive alternative to the 2-cyanoethyl group toward the large-scale preparation of therapeutic oligonucleotides.     

2-Benzamidoethyl group--a novel type of phosphate protecting group for oligonucleotide synthesis.

A number of 5'-O-(4,4'-dimethoxytrityl)thymidine N,N-diisopropylamino phosphoramidites protected at P(III) with derivatives of 2-benzamidoethanol were synthesized and incorporated into synthetic oligonucleotides. Depending on substitution patterns at the alkyl chain, amido group, and phenyl ring, the time required for removal of these protecting groups using concentrated ammonium hydroxide varied from 48 h at 55 degrees C to 25 min at 25 degrees C. Of the 11 groups studied, 2-[N-isopropyl-N- (4-methoxybenzoyl)amino]ethyl- (H) and omega-(thionobenzoylamino)alkyl protections (I and K) were most easily removed. Derivatives of the 2-[N-methyl-N-benzoylamino]ethyl group (E-G) demonstrated moderate stability, but those of the 2-(N-benzoylamino)ethyl group (A-C) were the most stable. For the most reactive group, H, a phosphitylating reagent, bisamidite 60, was synthesized and used in the preparation of four deoxynucleoside phosphoramidites 28 and 65-67, plus the 2'-O-(2-methoxyethyl)-5-methyluridine phosphoramidite 68. All of these novel building blocks were successfully tested in the preparation of natural, 20-mer oligonucleotides and their phosphorothioate analogues. With the model phosphotriester 37, the mechanism of deprotection was studied and revealed, in the case of group H, a pH-independent formation of the 2-oxazolinium cation 47. Under aqueous conditions, 47 gave 54, which in turn was converted in the presence of ammonia to a number of identified products. It is important to note that none of the products formed was reactive toward the oligonucleotide backbone or nucleic bases. Thus, a general strategy for protection of internucleosidic phosphodiester groups is described, which may also find application in synthetic organic chemistry of phosphorus(III) and (V).     

Development of Phosphoramidite Reagents for the Synthesis of Base-Labile Oligonucleotides Modified with a Linear Aminoalkyl and Amino-PEG Linker at the 3′-End

Oligonucleotides with an amino linker at the 3′-end are useful for the preparation of conjugated oligonucleotides. However, chemically modified nucleosides, which are unstable under basic conditions, cannot be incorporated into oligonucleotides using the conventional method entailing the preparation of oligonucleotides bearing a 3′-amino linker. Therefore, we designed Fmoc-protected phosphoramidites for the synthesis of base-labile oligonucleotides modified with a 3′-amino linker. The resultant phosphoramidites were then successfully incorporated into oligonucleotides bearing a 3′-amino linker. Various basic solutions were investigated for protecting group removal. All the protecting groups were removed by treating the oligonucleotides with 40% aqueous methylamine at room temperature for 2 h. Thus, the deprotection time and temperature were significantly reduced compared to the conventional conditions (28% NH₃ aq., 55 °C, 17 h). In addition, the oligonucleotide protecting groups could be removed using a mild base (e.g., 50 mM potassium carbonate methanol solution). Furthermore, base-labile oligonucleotides bearing an amino linker at the 3′-end were successfully synthesized using the developed phosphoramidite reagents, highlighting the utility of our strategy.     

Solid-phase synthesis of thermolytic DNA oligonucleotides functionalized with a single 4-hydroxy-1-butyl or 4-phosphato-/thiophosphato-1-butyl thiophosphate protecting group

Several thermolytic CpG-containing DNA oligonucleotides analogous to 1 have been synthesized to serve as potential immunotherapeutic oligonucleotide prodrug formulations for the treatment of infectious diseases in animal models. Specifically, the CpG motif (GACGTT) of each DNA oligonucleotide has been functionalized with either the thermolabile 4-hydroxy-1-butyl or the 4-phosphato-/thiophosphato-1-butyl thiophosphate protecting group. This functionalization was achieved through incorporation of activated deoxyribonucleoside phosphoramidite 8b into the oligonucleotide chain during solid-phase synthesis and, optionally, through subsequent phosphorylation effected by phosphoramidite 9. Complete conversion of CpG ODNs hbu1555, psb1555, and pob1555 to CpG ODN 1555 (homologous to 2) occurred under elevated temperature conditions, thereby validating the function of these diastereomeric oligonucleotides as prodrugs in vitro. Noteworthy is the significant increase in solubility of CpG ODN psb1555 and CpG pob1555 in water when compared to that of neutral CpG ODN fma1555 (homologous to 1).     

An efficient reagent for the phosphorylation of deoxyribonucleosides, DNA oligonucleotides, and their thermolytic analogues

[reaction: see text] The phosphoramidite 11 was prepared in three steps from methyl 2-mercaptoacetate and demonstrated efficiency in the synthesis of conventional 5'-/3'-phosphate/thiophosphate monoester derivatives of 2'-deoxyribonucleosides and DNA oligonucleotides. Moreover, the use of 11 has enabled the preparation of the dinucleoside phosphorothioate analogue 26 in high yields (>95%) with minimal cleavage (<2%) of the thermolytic thiophosphate protecting group.     

2,2,5,5-tetramethylpyrrolidin-3-one-1-sulfinyl group for 5'-hydroxyl protection of deoxyribonucleoside phosphoramidites in the solid-phase preparation of DNA oligonucleotides

Several nitrogen-sulfur reagents have been investigated as potential 5'-hydroxyl protecting groups for deoxyribonucleoside phosphoramidites to improve the synthesis of oligonucleotides on glass microarrays. Out of the nitrogen-sulfur-based protecting groups so far investigated, the 2,2,5,5-tetramethylpyrrolidin-3-one-1-sulfinyl group exhibited near optimal properties for 5'-hydroxyl protection by virtue of the mildness of its deprotection conditions. Specifically, the iterative cleavage of a terminal 5'-sulfamidite group in the synthesis of 5'-d(ATCCGTAGCCAAGGTCATGT) on controlled-pore glass is efficiently accomplished by treatment with iodine in the presence of an acidic salt. Hydrolysis of the oligonucleotide to its 2'-deoxyribonucleosides upon exposure to snake venom phosphodiesterase and bacterial alkaline phosphatase did not reveal the formation of any nucleobase adducts or other modifications. These findings indicate that the 2,2,5,5-tetramethylpyrrolidin-3-one-1-sulfinyl group for 5'-hydroxyl protection of phosphoramidites, such as 10a-d, may lead to the production of oligonucleotide microarrays exhibiting enhanced specificity and sensitivity in the detection of nucleic acid targets.     

New reagent for the preparation of oligonucleotides involving a 5′-thiophosphate or a 5′-phosphate group

We report here a novel, simple reagent enabling the chemical incorporation of a thiophosphate or a phosphate group at the 5′-end of oligonucleotides using very mild basic deprotection conditions. This method can be useful in the case of alkali sensitive modified oligonucleotides. This reagent also gives access to the preparation of bifunctional oligonucleotides with either a thiophosphate group at the 5′-end and a phosphate at the 3′-end, or two thiophosphate groups at both the 5′- and the 3′-ends, or a 5′-thiophosphate group and a 3′-amino-containing linker.     

Photocaging strategy for functionalisation of oligonucleotides and its applications for oligonucleotide labelling and cyclisation

We have used a photocaging strategy to develop novel phosphoramidites and expand the repertoire of protecting groups for modification of oligonucleotides by solid-phase synthesis. We synthesised five photolabile phosphoramidites and four new photolabile controlled pore glasses (CPGs). By using these photolabile phosphoramidites and CPGs, modified oligodeoxynucleotides (ODNs) with phosphate, amine, acid, thiol and carbonyl moieties at 5' and/or 3' ends were readily synthesised. To the best of our knowledge, this is the first report of introducing a carbonyl at the 5' end and thiol groups at both ends of ODNs with photolabile modifiers. Terminal labelling was also easily realised in solution or by on-column solid-phase synthesis. By using the photolabile amine modifier and the photolabile acid CPG, cyclisation of an oligodeoxynucleotide was achieved with good yields. This study provides an alternative way to introduce functional groups into oligonucleotides and expand the scope of oligonucleotide bio-orthogonal labelling.     

Thermolytic carbonates for potential 5'-hydroxyl protection of deoxyribonucleosides

Thermolytic groups structurally related to well-studied heat-sensitive phosphate/thiophosphate protecting groups have been evaluated for 5'-hydroxyl protection of deoxyribonucleosides as carbonates and for potential use in solid-phase oligonucleotide synthesis. The spatial arrangement of selected functional groups forming an asymmetric nucleosidic 5'-O-carbonic acid ester has been designed to enable heat-induced cyclodecarbonation reactions, which would result in the release of carbon dioxide and the generation of a nucleosidic 5'-hydroxyl group. The nucleosidic 5'-O-carbonates 3-8, 10-15, and 19-21 were prepared and were isolated in yields ranging from 45 to 83%. Thermolytic deprotection of these carbonates is preferably performed in aqueous organic solvent at 90 degrees C under near neutral conditions. The rates of carbonate deprotection are dependent on the nucleophilicity of the functional group involved in the postulated cyclodecarbonation reaction and on solvent polarity. Deprotection kinetics increase according to the following order: 4 < 5 < 10 < 6 < 12 < 7 < 13 < 8 < 14 congruent with 19-21 and CCl4 < dioxane < MeCN < t-BuOH < MeCN:phosphate buffer (3:1 v/v, pH 7.0) < EtOH:phosphate buffer (1:1 v/v, pH 7.0). Complete thermolytic deprotection of carbonates 7, 8, 13, and 14 is achieved within 20 min to 2 h under optimal conditions in phosphate buffer-MeCN. The 2-(2-pyridyl)amino-1-phenylethyl and 2-[N-methyl-N-(2-pyridyl)]aminoethyl groups are particularly promising for 5'-hydroxyl protection of deoxyribonucleosides as thermolytic carbonates.     

Synthesis of oligonucleotides containing Fapy.dG (N(6)-(2-deoxy-alpha,beta-D-erythropentofuranosyl)-2,6-diamino-4-hydroxy-5-formamidopyrimidine) using a 5'-dimethoxytrityl dinucleotide phosphoramidite

Fapy.dG (N(6)()-(2-deoxy-alpha,beta-d-erythropentofuranosyl)-2,6-diamino-4-hydroxy-5-formamidopyrimidine) is a modified purine lesion produced by a variety of DNA-damaging agents, which shows interesting biochemical properties. The previous method for synthesizing oligonucleotides containing Fapy.dG utilized a reverse dinucleotide phosphoramidite, which also required the synthesis of the appropriate reverse phosphoramidites. An improved method for synthesizing oligonucleotides containing Fapy.dG, which does not require reverse phosphoramidites, is described. Fapy.dG containing dinucleotide phosphoramidites containing 5'-thymidine (11a) or 5'-deoxycytidine (15) are prepared and employed in oligonucleotide synthesis. Oligonucleotide purity is assayed using the DNA repair enzyme formamidopyrimidine DNA glycosylase and by ESI-MS.     

31P NMR study of the desulfurization of oligonucleoside phosphorothioates effected by "aged" trichloroacetic acid solutions

When employing phosphoramidites 1a-d in the solid-phase synthesis of oligonucleoside phosphorothioates, the thermolytic 2-[N-methyl-N-(2-pyridyl)]aminoethyl thiophosphate protecting group is lost to a large extent during the course of the synthesis. The resulting phosphorothioate diesters are then substantially desulfurized upon recurring exposure to a commercial solution of deblocking reagent during chain assembly. This problem is caused by the secondary decomposition product(s) of the reagent and is alleviated by using a fresh solution of the deblocking reagent prepared from solid trichloroacetic acid.     

Syntheses of two 5-hydroxymethyl-2'-deoxycytidine phosphoramidites with TBDMS as the 5-hydroxymethyl protecting group and their incorporation into DNA

5-Hydroxymethylcytosine (5-hmC) is a newly discovered DNA base modification in mammalian genomic DNA that is proposed to be a major epigenetic mark. We report here the syntheses of two new versions of phosphoramidites III and IV from 5-iodo-2'-deoxyuridine in 18% and 32% overall yields, respectively, with TBDMS as the 5-hydroxyl protecting group. Phosphoramidites III and IV allow efficient incorporation of 5-hmC into DNA and a "one-step" deprotection procedure to cleanly remove all the protecting groups. A "two-step" deprotection strategy is compatible with ultramild DNA synthesis, which enables the synthesis of 5hmC-containing DNA with additional modifications.     

Universal solid supports for the synthesis of oligonucleotides via a transesterification of H-phosphonate diester linkage

[Structure: see text]. Three universal solid supports exhibiting an hydroxyl function were prepared. The introduction of a first H-phosphonate diester linkage which was kept throughout the elongation allowed the release of 3'-hydroxyl oligonucleotides by a transesterification mechanism. The transesterification was performed in a few minutes with either amino alcohols or K2CO3/methanol. Starting from a hydroxyl solid support, tandem oligonucleotides were synthesized and the solid support was easily recyclable. This strategy was extended to the release of an oligonucleotide from the solid support by a nonbasic treatment opening the way to the synthesis of base-sensitive oligonucleotides thanks to the selective deprotection of a hydroxyl in beta of the H-phosphonate diester linkage.     

烷基修饰寡聚脱氧核苷酸磷酸残基的化学合成及稳定性研究

分别采用格氏试剂和三氯化磷三步取代法合成了4个新的烷基修饰磷酸残基的亚磷酸酰胺单体, 其结构经1H NMR和31P NMR表征. 利用这些单体合成模型序列5'-dTTTx TT-3', 考察了单体及寡聚核苷酸序列在DNA/RNA合成条件下的稳定性, 提出了固相合成含有烷基修饰磷酸残基的寡聚核苷酸序列裂解及脱保护条件.     

Synthesis of chimeric oligonucleotides containing phosphodiester, phosphorothioate, and phosphoramidate linkages

[reaction: see text] H-Phosphonate monomers of 2'-O-(2-methoxyethyl) ribonucleosides have been synthesized. Oxidation of oligonucleotide H-phosphonates has been optimized to allow the synthesis of oligonucleotides containing either 2'-deoxy or 2'-O-(2-methoxyethyl) ribonucleoside residues combined with three different phosphate modifications in the backbone, i.e., phosphodiester (PO), phosphorothioate (PS), and phosphoramidate (PN). Phosphodiester linkages were introduced by oxidation with a cocktail of 0.1 M Et(3)N in CCl(4)/Pyr/H(2)O (5:9:1) without affecting phosphorothioate or phosphoramidate linkages. For the synthesis of phosphoramidate-modified oligonucleotides, N(4)-acetyl deoxycytidine-3'-H-phosphonate monomers were used to avoid transamination during the oxidation step.     

A conformationally preorganized universal solid support for efficient oligonucleotide synthesis

A novel, conformationally preorganized nonnucleosidic universal solid support for oligonucleotide synthesis was developed. The solid support featured two chemically equivalent hydroxy groups locked in syn-periplanar orientation and orthogonally protected with 4,4'-dimethoxytrityl and acetyl groups. The solid support was extensively tested in the preparation of oligonucleotides and their phosphorothioate analogues containing 2'-deoxy, 2'-O-methyl, and 2'-O-methoxyethylnucleoside residues at the 3'-terminus. Upon completion of oligonucleotide chain assembly, the support-bound oligonucleotide material was treated with concentrated ammonium hydroxide, which removed the O-acetyl protection. The deprotected hydroxy group then effected the transesterification of a phosphate linkage between the solid support and the 3'-terminal nucleoside residue to result in a facile release of the oligonucleotide to solution. The kinetics of the release process was studied in a continuous flow of concentrated aqueous ammonium hydroxide at a temperature of 300.15 K. Optimal conditions for the release of oligonucleotides depending on the chemistry of the backbone and 3'-terminal nucleoside residue were formulated.     

Synthesis of 2'-O-[2-[(N,N-dimethylamino)oxy]ethyl] modified nucleosides and oligonucleotides.

A versatile synthetic route has been developed for the synthesis of 2'-O-[2-[(N,N-dimethylamino)oxy]ethyl] (abbreviated as 2'-O-DMAOE) modified purine and pyrimidine nucleosides and their corresponding nucleoside phosphoramidites and solid supports. To synthesize 2'-O-DMAOE purine nucleosides, the key intermediate B (Scheme 1) was obtained from the 2'-O-allyl purine nucleosides (13a and 15) via oxidative cleavage of the carbon-carbon bond to the corresponding aldehydes followed by reduction. To synthesize pyrimidine nucleosides, opening the 2,2'-anhydro-5-methyluridine 5 with the borate ester of ethylene glycol gave the key intermediate B. The 2'-O-(2-hydroxyethyl) nucleosides were converted, in excellent yield, by a regioselective Mitsunobu reaction, to the corresponding 2'-O-[2-[(1,3-dihydro-1,3-dioxo-2H-isoindol-2-yl)oxy]ethyl] nucleosides (18, 19, and 20). These compounds were subsequently deprotected and converted into the 2'-O-[2-[(methyleneamino)oxy]ethyl] derivatives (22, 23, and 24). Reduction and a second reductive amination with formaldehyde yielded the corresponding 2'-O-[2-[(N,N-dimethylamino)oxy]ethyl] nucleosides (25, 26, and 27). These nucleosides were converted to their 3'-O-phosphoramidites and controlled-pore glass solid supports in excellent overall yield. Using these monomers, modified oligonucleotides containing pyrimidine and purine bases were synthesized with phosphodiester, phosphorothioate, and both linkages (phosphorothioate and phosphodiester) present in the same oligonucleotide as a chimera in high yields. The oligonucleotides were characterized by HPLC, capillary gel electrophoresis, and ESMS. The effect of this modification on the affinity of the oligonucleotides for complementary RNA and on nuclease stability was evaluated. The 2'-O-DMAOE modification enhanced the binding affinity of the oligonucleotides for the complementary RNA (and not for DNA). The modified oligonucleotides that possessed the phosphodiester backbone demonstrated excellent resistance to nuclease with t(1/2) > 24 h.     

A new hydrophobic linker effective for the in situ synthesis of DNA-CPG conjugates as tools for SNP analysis

DNA chips consisting of DNA oligonucleotide probes immobilized on the surface of solid supports are very powerful tools for rapid analysis of multiple samples. In this Letter we describe a new method for the efficient synthesis of DNA probes without their serious elimination by use of a new hydrophobic 16-hyroxydecanoic linker and a new non-aqueous reagent of MeNH₂/THF for the deprotection of the base and phosphate protecting groups on CPG resins. The elimination of DNA probes in this new method could be suppressed more than 20-fold compared with the previous method using a hexaethylene glycol linker and concd NH₄OH. Moreover, we carried out SNPs detection by use of our DNA-CPG conjugate to show the utility of our new linker and deprotection conditions.     

Comparisons of phosphorothioate with phosphate transfer reactions for a monoester,diester, and triester: isotope effect studies

Phosphorothioate esters are sometimes used as surrogates for phosphate ester substrates in studies of enzymatic phosphoryl transfer reactions. To gain better understanding of the comparative inherent chemistry of the two types of esters, we have measured equilibrium and kinetic isotope effects for several phosphorothioate esters of p-nitrophenol (pNPPT) and compared the results with data from phosphate esters. The primary (18)O isotope effect at the phenolic group ((18)k(bridge)), the secondary nitrogen-15 isotope effect ((15)k) in the nitro group, and (for the monoester and diester) the secondary oxygen-18 isotope effect ((18)k(nonbridge)) in the phosphoryl oxygens were measured. The equilibrium isotope effect (EIE) (18)k(nonbridge) for the deprotonation of the monoanion of pNPPT is 1.015 +/- 0.002, very similar to values previously reported for phosphate monoesters. The EIEs for complexation of Zn(2+) and Cd(2+) with the dianion pNPPT(2-) were both unity. The mechanism of the aqueous hydrolysis of the monoanion and dianion of pNPPT, the diester ethyl pNPPT, and the triester dimethyl pNPPT was probed using heavy atom kinetic isotope effects. The results were compared with the data reported for analogous phosphate monoester, diester, and triester reactions. The results suggest that leaving group bond fission in the transition state of reactions of the monoester pNPPT is more advanced than for its phosphate counterpart pNPP, while alkaline hydrolysis of the phosphorothioate diester and triester exhibits somewhat less advanced bond fission than that of their phosphate ester counterparts.