Développement de lasers visibles pompés par diode à base de cristaux de Nd:GdCOB autodoubleurs de fréquence

We present the performances of a diode-pumped solid-state laser operating in the visible by self-frequency-doubling. A cw output power of 115 mW at 545 nm has been obtained in a stable concave–concave cavity by using a crystal of Nd:GdCa₄O(BO₃)₃ pumped by a 2 W high-brightness laser diode. In a plano–plano cavity, similar to a microchip laser, we have obtained, for the first time to our knowledge, an output power of 22 mW in the green.     

Modélisation de séchoirs à tapis. Utilisation des réseaux de neurones

Modelling of convective layer dryers. Using neural networks. Dryer modelling is considered in this paper. A dryer scale approach is implemented in order to write the classical differential equations through parameters such as the heat transfer coefficient or drying kinetics. The behaviour of the dryers is described by a non-linear system which integrates these equations in a transfer network using the finite difference method. The finite difference method is easy to implement, but appears to be too slow for dryer designing. So, in the second part of the study, neural networks are used to model drying process in steady state. When applying neural networks method to the design of dryers, one of the main problems is to find necessary and sufficient inputs so that the neural networks can learn transfers laws. To reduce the problem, each output is defined by a single neural network and non-dimensional numbers are used. The following step deals with the determination of the number of neurones and the minimization of output error for each efficiency (change of training points). Then, neural networks are used to simulate different configurations of dryers. Results are compared with the finite difference method and an industrial application is studied in the last chapter.     

Quelques problèmes posés par les découvertes de Pluton et de Neptune

This Note reviews the history of the discovery of the planets Pluto and Neptune. To cite this article: V. Kourganoff, C. R. Physique 4 (2003).     

Identification des propriétés thermiques de composites fibres de verre/résines thermodurcissables: Application à l'optimisation des procédés de moulage

Identification of glass fiber/thermosetting resins composites thermal properties. Application to the optimization of molding processes. A procedure has been developed to optimize molding processes of thermosetting composite materials. Three stages have been distinguished. In the first one, some thermal and kinetic properties have been measured by differential scanning calorimetry. Thermal conductivities have been identified afterwards in thick instrumented pieces, placed in a thermally regulated press. High dependences of thermal conductivities on temperature and transformation degree have been shown. Secondly, coupled heat transfers have been numerically simulated and results have been satisfactorily compared with experimental thermograms. Finally, optimization technics based on effective inverse methods have been used.These points have been illustrated with two examples : glass fiber/epoxy resin and glass fiber/polyester. Sufficient mechanical characteristics of the first one, which is cured in oven, and good surface aspect of the second, that is made by injection in heated and closed molds, had to be obtained. The results let foresee real improvement of the corresponding molding processes.     

Dynamique non-linéaire d'instabilités de surface : gouttes et colonnes liquides formées par ruissellement de films

The destabilization of a thin film by gravity is of central importance in many industrial devices, especially those involved in Thermics (film boiling, heat exchangers). In the simplest case of a liquid film hanging below a solid ceiling, spatial structures are forced by the destabilizing action of gravity (Rayleigh-Taylor instability): one observes regular lattices of pendant drops, that in turn become instable by coalescences and falling of the drops. When the film is supplied with liquid at a constant rate, other flow regimes are observed: periodic emission of drops, formation of regular arrays of liquid columns, liquid sheet. Liquid columns exhibit a collective dynamics that is typical of non-linear systems: modulations of their spatial periodicity, diffusion of the perturbations, self-sustained oscillations, propagation of solitary dilation waves, coalescences and nucleations of the columns, etc.     

Application, à un cristal de béryl,d'une nouvelle méthode d'étude par réflexion

The vibrational frequencies of beryl are determined from a measurement of the optical constants with a method utilizing reflexion from samples with and without an evaporated layer of an optically known substance.     

Instabilités de calibration de phase

In very long baseline interferometry, the image reconstruction procedures are very sensitive to the potential instabilities of the phase calibration operation. The analysis presented in this Note reveals that these instabilities are due to the existence of secondary minima (more or less critical) of the phase calibration objective functional. By resolving the corresponding integer ambiguity problems in an appropriate manner, these minima can be explicitly identified and compared. The stability of the self-calibration procedures can thus be easily controlled. To cite this article: A. Lannes, C. R. Physique 4 (2003).     

Modèle correctif de la mesure de la température d'un gaz par couple thermoélectrique. Application à une zone à fort gradient thermique

Corrective model of the gas temperature thermocouple measure. Application to an important thermal gradient zone. The gas temperature measurement with a thermocouple in important thermal gradient zones requires a corrective model. For example, such zones exist for thermal boundary layers near active walls. We have calculated these thermocouple thermal exchanges where connection wires are considered as fins with a variable ambient gas temperature. The heat exchanges by convection and radiation on the thermocouple head are analytically calculated, then a numerical method is used for fins where the space increment is the same as for the experimental measure. The corrective model in steady state is semi-analytical. Its validation is made with experimental results from studies of flows along a non-isothermal vertical wall in a cavity filled with wet air. Several applications are offered for many thermal curves, for more important gradient zones corrections are larger than 1.5 K for a K type thermocouple of 0.08 mm wire diameter.     

Facteur de bruit d'une chaı̂ne de cinématographie ultrarapide : application à la fusion par confinement inertiel

Inertial confinement fusion simulates in a laboratory the thermodynamic state of the center of stars, thus leading to the determination of stellar parameters. In order to reach that aim, high-speed cinematography brings up instruments specifically adapted to picosecond measurement, for which it is necessary to know the final precision. A model of the noise factor of the instruments under study is introduced and confronted to the experimental results obtained.     

Mesures spectroscopiques de constituants et de polluants atmosphériques par techniques in situ et à distance,au sol ou embarquées

Infrared spectroscopy is a powerful tool for precise measurements of atmospheric trace species concentrations through the use of characteristic spectral signatures of the different molecular species and their associated vibration–rotation bands in the mid- or near-infrared. Different methods based on quantitative spectroscopy permit tropospheric or stratospheric measurements: in situ long path absorption, atmospheric absorption/emission by Fourier transform spectroscopy with high spectral resolution instruments on the ground, airborne, balloon-borne or satellite-borne.     

Polarisabilités optiques moléculaires de dérivés benzèniques en solution déterminées par des mesures d'effet Kerr statique

Une expression théorique simplifiée de la constante de Kerr permet une comparaison cohérente des mesures d'effet Kerr statique et de diffusion Rayleigh dépolarisée. Cette comparaison ainsi que des mesures de moments dipolaires sont effectuées sur une série de composés benzèniques en solution diluée dans le tétrachlorure de carbone. La méthode d'exploitation des résultats expérimentaux conduit à la détermination du tenseur des polarisabilités optiques moléculaires α de ces composés. Un accord satisfaisant est obtenu en comparant la constante spécifique de Kerr S _k et l'anisotropie optique moléculaire γ², calculées à partir de ces polarisabilités, à leurs valeurs expérimentales.     

Quelques nouvelles propriétés de régularité de l'opérateur de Gribov

In this work, we establish new regularity properties for Gribov's operator:H=A ^* A ₊ iA ^*(A+A ^*)A;(,)², whereA ^* andA are the creation and annihilation operators. Particularly, we prove that for all >0,H ^–1 is in the class of Carleman's operatorl ₁₊.     

Etude théorique de la durée de vie radiative du triplet métastable de quelques composés carbonylés

Les paramètres de phosphorescence (force d'oscillateur et durée de vie), sont déterminés théoriquement pour quelques composés carbonylés (formaldéhyde, benzaldéhyde, acétophénone, propiophénone, 2,4,5-triméthylbenzaldéhyde, et 3,4-diméthylacétophénone). La fonction d'onde de l'état singulet fondamental est obtenue à l'aide d'un calcul SCF utilisant la méthode CNDO/S de Del Bene et Jaffé. Les fonctions d'onde, les énergies et les moments de transition dipolaire électrique S_I ←S ₀ et T_J ←T ₁ sont déterminés à l'aide d'une interaction portant sur des configurations mono et diexcitées par rapport à l'état singulet fondamental.

Les paramètres de phosphorescence sont calculés en utilisant une approximation monocentrique et monoélectronique de l'opérateur hamiltonien de couplage spin-orbite. Cette approximation est justifiée par la comparaison des résultats obtenus avec les valeurs expérimentales, compte tenu de la concordance entre les conditions d'expérience et les hypothèses de calcul.     

Ecriture de l'énergie cinétique à l'aide d'opérateurs quasi-moments

Cet article concerne l'utilisation des quasi-moments ?π _m , définis par

,

pour exprimer l'opérateur correspondant à l'énergie cinétique de N particules en Mécanique Quantique. La condition de Wilson-Howard portant sur les coefficients s^ml est interprétée comme la condition pour que les opérateurs ?π _m soient hermitiques quand on utilise l'élément de volume s dq ₁ … dq ₃ N (s=[dét {s^ml }]^-1). La condition générale pour qu'il soit possible de trouver un élément de volume avec lequel les opérateurs ?π _m sont hermitiques est donnée et différentes expressions de l'opérateur énergie cinétique sont établies quand cette condition est remplie et quand elle ne l'est pas.     

Etude expérimentale de la dévolatilisation rapide de charbons pulvérisés

Experimental study of the rapid devolatilization of pulverized coals. Rapid devolatilization of various pulverized coals have been studied in a laboratory bench constituted by a flat flame burner of propane which reproduces thermal conditions of an industrial flame. The particles, which undergo a heating rate of 6.10⁶ K⁻¹.s⁻¹ with a peak temperature of 1 100 °C, are completely devolatilized within 24 ms. Fifteen coals, included in a wide range (anthracite to subbituminous coal) have been tested. The coal weight loss is globally proportional to the normalized volatile matter content with some exceptions which confirm the advantage of this laboratory bench. The formation of tars or hydrocarbons has been related to the coal weight loss. Carbon, hydrogen and nitrogen devolatilized fraction have been followed with total mass weight loss. In spite of the fact that hydrogen and carbon devolatilized fractions present a good correlation with the total mass weight loss, the nitrogen devolatilized fraction have an anarchic evolution. For high heating rates, the devolatilization of tars observed for the bituminous coals seems to explain this unpredictable phenomenon. These results will be valorized in comparison with those obtained in industrial flame conditions.     

Ventilation naturelle d'un local par une grande ouverture extérieure : Calcul à l'aide d'un code de champ

This paper is dedicated to the numerical study of natural ventilation in a room through a large external opening using the CFD code Fluent. Bidimensional numerical simulations are performed for wind speeds up to 5.55 m·s⁻¹ (20 km·h⁻¹). We propose a two-step solution procedure with grid refinement. When combined with appropriate thermal boundary conditions, this technique appears very efficient at limiting local convergence problems. Through an analysis of the flow pattern in the cavity, we qualitatively explain those results and define a critical Archimedes number. Calculated air change rates are compared to values deduced from empirical correlations of the literature. Agreement is in general poor, which can be explained by the differences between the conditions of our simulations and those of the experiments that lead to those correlations. However, from our simulations, we derived very clear correlations between the air change coefficient and the Archimedes number. In the last part, our results are compared with published data from two experiments. Agreement, in terms of air change coefficient, is within 26 % on average with the Porto test cell data which is closest to our numerical conditions. One should be careful about the transposition of our results to different ventilation scenarios.     

Simulation des transferts de masse et de chaleur par modélisation à bas nombres de Reynolds dans un écoulement avec effusion locale en canalisation

The turbulence model developed by Lam and Bremhorst with low values of Reynolds numbers is used to simulate a flow between two impermeable plate walls. This model, corrected by Yap, is able to simulate flow inside the boundary layer on the part of porous walls submitted to the blowing. This model of flow inside a channel with local blowing is coupled with a model of transfers through the impermeable walls and the porous wall, and with the environment. The global model is validated by comparison between experimental results from the literature and those obtained by the authors from experiences carried out with the test facilities of a subsonic thermal wind tunnel.A simulation of non-isothermal flow inside a channel with local blowing shows the attractive way of wall cooling by blowing. The optimal injection ratio is found equal to 0.01.     

Dimérisation des sels de l'ion nitrosodisulfonate à l'état solide

La dimérisation de plusieurs sels du radical libre nitrosodisulfonate est étudiée par R.S.E. Les spectres d'échantillons polycristallins de deux formes cristallographiques des sels de sodium, potassium et rubidium, sont caractéristiques d'un état triplet accessible thermiquement. Ces spectres sont attribués à des paires de groupements NO radicalaires, couplés par échange et sont décrits par l'Hamiltonien de spin:

Les paramètres de déplacement en champ nul, les composantes du tenseur g le long des directions principales X, Y, Z du tenseur fin et la composante du tenseur A le long de l'axe Z (dans le cas où la structure hyperfine est résolue), ont été mesurés et discutés.

A partir de ces mesures, on montre que l'axe Z est dirigé suivant les orbitales 2p des atomes d'azote et d'oxygène, et que l'axe X est dirigé selon la liaison NO. Par suite, l'arrangement des deux groupements NO d'une paire est toujours sensiblement rectangulaire.

Dans le cas des deux formes cristallines du potassium et du rubidium, l'écart singulet triplet dépend de la température, ainsi que les paramètres de déplacement en champ nul, ces variations avec la température sont attribuées à l'expansion thermique du réseau.

La présence d'une structure hyperfine bien résolue dans certains de ces sels, et la forte anisotropie des largeurs de raies dans les autres sels, suggèrent que les excitations sont fortement localisées, et que si elle sont mobiles leur fréquence de saut est inférieure à 10⁷ Hz.