Lanthanide borohydrido complexes for MMA polymerization: syndio‐ vs iso‐ stereocontrol

This paper presents an extensive study of the polymerization of MMA with borohydrido lanthanide complexes for the first time. Catalytic systems are made from a lanthanide derivative bearing zero one, or two bulky ligands: substituted cyclopentadienyl (Cp^*′ = C₅Me₄nPr, Cp⁴ⁱ = C₅HiPr₄, Cp^Ph3 = H₂C₅Ph₃‐1,2,4), and/or diketiminate ([(p‐tol)NN] = [(p‐CH₃C₆H₄)N(CH₃)C]₂CH), in the presence of variable quantities of alkylating agent. With BuLi in apolar medium, highly isotactic polymer (up to 95.6%) is formed. In THF, syndiotactic‐rich PMMA is obtained whatever the nature of the co‐catalyst (BuLi or MgⁿBu₂). The presence of an electron‐withdrawing ligand such as Cp^Ph3 allows high syndioregularity, up to 81.8% at 0 °C, together with the highest conversion. There is quite good concordance between calculated and experimental molecular data in THF. Divalent Cp^*′₂Sm^II(THF) and (Cp^Ph3)₂Sm^II(THF) are active as single‐component initiators; the former affords PMMA 88% syndiotactic at 0 °C. Copyright © 2005 John Wiley & Sons, Ltd.     

Zirconium‐chelate and mono‐η‐ cyclopentadienyl zirconium‐chelate/ methylalumoxane systems as soluble Ziegler–Natta olefin polymerization catalysts

Zirconium‐chelate and mono‐η‐cyclopentadienyl zirconium‐chelate complexes were tested as ethene and propene polymerization catalysts in combination with methylalumoxane (MAO) as a co‐catalyst: in particular (acac) _nZrCl_4−n (1a–c) (acac = acetylacetonato), (dbm) _nZrCl_4−n (2a–2c) (dbm = dibenzoylmethanato = 1,3‐diphenylpropanedionato) (n = 2–4) and (dbm)₂ZrCl₂(thf) (3) (thf = tetrahydrofuran), (η‐C₅H₅)[H₂B (C₃H₃N₂)₂]ZrCl₂ (4), (η‐C₅H₅)[HB (C₃H₃N₂)₃] ZrCl₂ (5) and (η‐C₅H₅)[(Me₃SiN)₂ CPh]ZrCl₂ (6). Polymerization productivities comparable with the (η‐C₅H₅)₂ZrCl₂ reference system were observed towards ethene for all of the above complexes. In addition, compound 6 showed some minor polymerization activity towards propene. Ethylalumoxane or isobutylalumoxane did not exhibit a co‐catalytic activity for these chelate complexes; in combination with MAO these higher alumoxanes were even found to be deactivating ⁹¹Zr NMR data are reported for 1b, 1c, 4 and 5. Copyright © 2000 John Wiley & Sons, Ltd.     

Hydroboration of Alkynes with Zwitterionic Ruthenium–Borate Complexes: Novel Vinylborane Complexes

Building upon previous studies on the synthesis of bis(sigma)borate and agostic complexes of ruthenium, the chemistry of nido‐[(Cp*Ru)₂B₃H₉] ( 1 ) with other ligand systems was explored. In this regard, mild thermolysis of nido‐ 1 with 2‐mercaptobenzothiazole (2‐mbzt), 2‐mercaptobenzoxazole (2‐mbzo) and 2‐mercaptobenzimidazole (2‐mbzi) ligands were performed which led to the isolation of bis(sigma)borate complexes [Cp*RuBH₃L] ( 2 a – c ) and β‐agostic complexes [Cp*RuBH₂L₂] ( 3 a – c ; 2 a , 3 a : L=C₇H₄NS₂; 2 b , 3 b : L=C₇H₄NSO; 2 c , 3 c : L=C₇H₅N₂S). Further, the chemistry of these novel complexes towards various diphosphine ligands was investigated. Room temperature treatment of 3 a with [PPh₂(CH₂)_nPPh₂] (n=1–3) yielded [Cp*Ru(PPh₂(CH₂)_nPPh₂)‐BH₂(L₂)] ( 4 a – c ; 4 a : n=1; 4 b : n=2; 4 c : n=3; L=C₇H₄NS₂). Mild thermolysis of 2 a with [PPh₂(CH₂)_nPPh₂] (n=1–3) led to the isolation of [Cp*Ru(PPh₂(CH₂)_nPPh₂)(L)] (L=C₇H₄NS₂ 5 a – c ; 5 a : n=1; 5 b : n=2; 5 c : n=3). Treatment of 4 a with terminal alkynes causes a hydroboration reaction to generate vinylborane complexes [Cp*Ru(R?C?CH₂)BH(L₂)] ( 6 and 7 ; 6 : R=Ph; 7 : R=COOCH₃; L=C₇H₄NS₂). Complexes 6 and 7 can also be viewed as η‐alkene complexes of ruthenium that feature a dative bond to the ruthenium centre from the vinylinic double bond. In addition, DFT computations were performed to shed light on the bonding and electronic structures of the new compounds.     

Titanium(IV) complexes containing mono‐cyclopentadienyl and bulky trityloxy mixed ligands: synthesis and polymerization activity

Eight new R¹CpTiCl₂(OC(C₆H₄R²)Ph₂) complexes were synthesized by the reaction of R¹CpTiCl₃ with Ph₂(R²C₆H₄)COH (R²C₆H₄ = phenyl or o‐methyl‐phenyl) in the presence of Et₃N in good yield and characterized by ¹H NMR, elemental analysis, IR and mass spectrometry. A suitable single crystal of complex 2 (R¹: CH₃, R²: H) was obtained and the structure determined by X‐ray diffraction. When activated by methylaluminoxane (MAO), all complexes were active for the polymerization of ethylene and styrene. The effect of variation in temperature, catalyst concentration and MAO/catalyst molar ratio was also studied. Complex 5 (R¹: n‐C₄H₉, R²: H) showed a moderate conversion (37.4%) for the polymerization of methyl methacrylate. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis and characterization of novel neutral nickel complexes bearing fluorinated salicylaldiminato ligands and their catalytic behavior for vinylic polymerization of norbornene

A series of salicylaldimine‐based neutral Ni(II) complexes (3a–j) [ArN = CH(C₆H₄O)]Ni(PPh₃)Ph [3a, Ar = C₆H₅; 3b, Ar = C₆H₄F(o); 3c, Ar = C₆H₄F(m); 3d, Ar = C₆H₄F(p); 3e, Ar = C₆H₃F₂(2,4); 3f, Ar = C₆H₃F₂(2,5); 3g, Ar = C₆H₃F₂(2,6); 3h, Ar = C₆H₃F₂(3,5); 3i, Ar = C₆H₂F₃(3,4,5); 3j, Ar = C₆F₅] have been synthesized in good yield, and the structures of complexes 3a and 3i have been confirmed by X‐ray crystallographic analysis. Using modified methylaluminoxane as a cocatalyst, these neutral Ni(II) complexes exhibited high catalytic activities for the vinylic polymerization of norbornene. It was observed that the strong electron‐withdrawing effect of the fluorinated salicylaldiminato ligand was able to significantly increase the catalyst activity for vinylic polymerization of norbornenes. In addition, catalyst activity, polymer yield and polymer molecular weight can also be controlled over a wide range by the variation of reaction parameters such as Al:Ni ratio, norbornene:catalyst ratio, monomer concentration, polymerization temperature and time. Copyright © 2008 John Wiley & Sons, Ltd.     

Factors affecting product distributions in ethylene/styrene copolymerization by (aryloxo)(cyclopentadienyl)titanium complexes‐MAO catalyst systems

Ethylene/styrene copolymerizations using Cp′TiCl₂(O‐2,6‐ⁱPr₂C₆H₃) [Cp′ = Cp* (C₅Me₅, 1 ), 1,2,4‐Me₃C₅H₂ ( 2 ), tert‐BuC₅H₄ ( 3 )]‐MAO catalyst systems were explored under various conditions. Complexes 2 and 3 exhibited both high catalytic activities (activity: 504–6810 kg‐polymer/mol‐Ti h) and efficient styrene incorporations at 25, 40°C (ethylene 6 atm), affording relatively high molecular weight poly (ethylene‐co‐styrene)s with unimodal molecular weight distributions as well as with uniform styrene distributions (M_w = 6.12–13.6 × 10⁴, M_w/M_n = 1.50–1.71, styrene 31.7–51.9 mol %). By‐productions of syndiotactic polystyrene (SPS) were observed, when the copolymerizations by 1 – 3 ‐MAO catalyst systems were performed at 55, 70 °C (ethylene 6 atm, SPS 9.0–68.9 wt %); the ratios of the copolymer/SPS were affected by the polymerization temperature, the [styrene]/[ethylene] feed molar ratios in the reaction mixture, and by both the cyclopentadienyl fragment (Cp′) and anionic ancillary donor ligand (L) in Cp′TiCl₂(L) (L = Cl, O‐2,6‐ⁱPr₂C₆H₃ or N=C^tBu₂) employed. Co‐presence of the catalytically‐active species for both the copolymerization and the homopolymerization was thus suggested even in the presence of ethylene; the ratios were influenced by various factors (catalyst precursors, temperature, styrene/ethylene feed molar ratio, etc.). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4162–4174, 2008     

Synthesis and Structure of 1—Cyclopentylindenyl Lanthanide（Ⅱ）Complexes and Their Catalytic Behavior for Polymerization of Acrylonitrile

The reaction between K(1‐C₅H₉C₉H₆) and anhydrous LnCl₃ (Ln=Sm, Yb) in the molar ratio of 2:1 in THF with subsequent treatment by Na‐K alloy afforded (1‐C₅H₉C₉H₆)₂Ln‐(THF)_n(Ln=Sm, n=1; Ln=Yb, n=2), while the reaction of Sml₂ with K(1‐C₅H₉C₉H₆) in the molar ratio of 1:2 in THF gave the anionic complex K(1‐C₅H₉C₉H₆)₃Sm(THF)₃. The X‐ray structure of (1‐C₅H₉C₉H₆)₂Yb(THF)₂ showed that central metal Yb is coordinated by two cyclopentadienyl rings of 1‐cyclopentylindenyls and two oxygen atoms from two tetrahydrofuran molecules to form pseudo‐tetrahedral coordinate geometry. All these complexes are active for the polymerization of acrylonitrile.     

新型取代硅桥联茂稀土化合物的合成及在纳米级氢化钠助催化剂作用下高活性催化甲基丙烯酸甲酯聚合的研究

The synthesis and characterization of four new silicon-linked lanthanocene complexes with pendant phenyl groups on cyclopentadiene were reported. Based on the data of elemental analyses, MS and IR, the complexes were presumed to be unsolvated and dimeric complexes [Me2Si(C5H3CMe2C6H5)2LnC1]2 [Ln=Er (1), Gd (2), Sm (3), Dy (4)]. In conjunction with AlEt3 or sodium hydride as the co-catalyst, these complexes could efficiently catalyze the polymerization of methyl methacrylate (MMA). When the nanometric sodium hydride was used as a co-catalyst, the complexes were highly effective for the polymerization of MMA. At low temperature and in short time, in [MeESi(C5H3CMe2C6H5)2LnC1]2/NaH (nanometric) system, the polymer was obtained in more than 80% yield and the molecular weight was greater than 105. The activity reached that of organolanthanide hydride as a single-component catalyst. In ]MeESi(C5H3CMe2C6H5)2ErC1]2/Nail (nanometric) system, the effects of the molar ratio of MMA/catalyst and catalyst/co-catalyst, and the temperature on polymerization were studied.     

Synthesis,structure characterization and catalytic activity of lanthanide complexes containing an ansa carbonous‐bridged cyclopentadienyl—thienyl ligand

A kind of new lanthanocene complex with an ansa carbonous‐bridged cyclopentadienyl/aromatic heterocycle ligand was prepared and characterized. Based on the data of elemental analyses, MS and IR, they were presumed to be solvent‐free complexes (cyclo‐C₄H₃SCMe₂C₅H₄)₂LnCl [Ln = Er (1), Dd ( 2 ), Y ( 3 ), Sm ( 4 )]. These complexes were effective for the polymerization of methyl methacrylate in the presence of co‐catalyst. When AlEt₃ and NaH (nanometric) were used as different co‐catalysts, the lanthanocene complexes 1–4 showed different catalytic behavior. These differences resulted from the formation of different active species. The catalyst system (cyclo‐C₄H₃SCMe₂C₅H₄)₂LnCl/NaH (nanometric) showed high catalytic activity (yield ≥ 95% and Mη > 10⁵) in a short time at the ambient temperature. Copyright © 2008 John Wiley & Sons, Ltd.     

Efficient introduction of aromatic vinyl group by incorporation of divinylbiphenyl,p‐divinylbenzene in syndiospecific styrene polymerization using aryloxo‐modified half‐titanocene catalysts

An efficient introduction of aromatic vinyl group into syndiotactic polystyrene has been achieved by incorporation of 3,3′‐divinylbiphenyl, p‐divinylbenzene (DVB) in syndiospecific styrene polymerization using aryloxo‐modified half‐titanocenes, Cp′TiCl₂(O‐2,6‐ⁱPr₂C₆H₃) (Cp′ = ^tBuC₅H₄, 1,2,4‐Me₃C₅H₂), in the presence of MAO. The resultant polymers possessed high molecular weights with uniform molecular weight distributions, and the DVB contents could be varied by the initial feed molar ratios (6–23 mol %) without decrease in the M_n values. The syndiotactic stereo‐regularity and presence of the vinyl groups were confirmed by NMR spectra. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1902–1907     

Electrochemical polymerization of aniline in the SDS/n‐C5H11OH/H2SO4(aq) lyotropic liquid crystal

Electrochemical polymerization of aniline was performed by the method of ultramicroelectrode cyclic voltammetry in the lamellar liquid crystal and hexagonal liquid crystal of SDS/n‐C₅H₁₁OH/H₂SO₄(aq) system. The results indicate that the electrochemical polymerization of aniline can be catalyzed by the SDS/n‐C₅H₁₁OH/H₂SO₄(aq) lyotropic liquid crystal. The polymerization potential of aniline is smaller in the lyotropic liquid crystal system than that in the 0.10 mol L?1 sulfuric acid solution. The catalytic efficiency and polymerization rate of aniline increase with the n‐pentanol content, but decrease with the increase of the SDS content or [PhNH₂/H₂SO₄(aq)] content. Moreover, the catalytic efficiency of the lamellar liquid crystal exceeds that of the hexagonal liquid crystal in the SDS/n‐C₅H₁₁OH/H₂SO₄(aq) system. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2388–2394, 2006     

Transfer Hydrogenation of Ketones Catalyzed by Surface‐Active Ruthenium and Rhodium Complexes in Water

An improved, high‐yield, one‐pot synthetic procedure for water‐soluble ligands functionalized with trialkyl ammonium side groups H₂N(CH₂)₂NHSO₂‐p‐C₆H₄CH₂[NMe₂(C_nH_2n+1)]⁺ ( [HL ⁿ ]⁺ ; n=8, 16) was developed. The corresponding new surface‐active complexes [(p‐cymene)RuCl( L ⁿ )] and [Cp*RhCl( L ⁿ )] (Cp*=η⁵‐C₅Me₅) were prepared and characterized. For n=16 micelles are formed in water at concentrations as low as 0.6 mM , as demonstrated by surface‐tension measurements. The complexes were used for catalytic transfer hydrogenation of ketones with formate in water. Highly active catalyst systems were obtained in the case of complexes bearing C₁₆ tails due to their ability to be adsorbed at the water/substrate interface. The scope of these catalyst systems in aqueous solutions was extended from partially water soluble aryl alkyl ketones (acetophenone, butyrophenone) to hydrophobic dialkyl ketones (2‐dodecanone).     

Phosphine (oxide)‐(thio) phenolate palladium complexes: Synthesis,characterization and (co)polymerization of norbornene

A series of palladium complexes ( 2a–2g ) ( 2a : [6‐^tBu‐2‐PPh₂‐C₆H₃O]PdMe(Py); 2b : [6‐C₆F₅–2‐PPh₂‐C₆H₃O]PdMe(Py); 2c : [6‐^tBu‐2‐PPh^tBu‐C₆H₃O]PdMe(Py); 2d : [2‐PPh^tBu‐C₆H₄O] PdMe(Py); 2e : [6‐SiMe₃–2‐PPh₂‐C₆H₃O]PdMe(Py); 2f : [2‐^tBu‐6‐(Ph₂P=O)‐C₆H₃O]PdMe(Py); 2g : [6‐SiMe₃–2‐(Ph₂P=O)‐C₆H₃S]PdMe(Py)) bearing phosphine (oxide)‐(thio) phenolate ligand have been efficiently synthesized and characterized. The solid‐state structures of complexes 2d , 2f and 2g have been further confirmed by single‐crystal X‐ray diffraction, which revealed a square‐planar geometry of palladium center. In the presence of B(C₆F₅)₃, these complexes can be used as catalysts to polymerize norbornene (NB) with relatively high yields, producing vinyl‐addition polymers. Interestingly, 2a /B(C₆F₅)₃ system catalyzed the polymerization of NB in living polymerization manner at high temperature (polydispersity index 1.07, M_n up to 1.5 × 10⁴). The co‐polymerization of NB and polar monomers was also studied using catalysts 2a and 2f . All the obtained co‐polymers could dissolve in common solvent.     

Monohaloboryls (BHX−) as Bridging Ligands: Observable Dinuclear σ‐(Halo)boranyl Intermediates in the Synthesis of Metalloborylenes

Upon treating transition‐metal–dihaloboryl complexes of the form [L_nMBX₂] with K[(η⁵‐C₅H₅)MnH(CO)₂], salt elimination occurs along with a migration of the Mn‐bound hydride ligand onto the boron atom, thereby forming dinuclear σ‐(halo)boranyl complexes of the form [L_nM(μ‐BHX)Mn(CO)₂(η⁵‐C₅H₅)]. Most of these complexes react further at room temperature to lose HX and provide metalloborylene complexes [L_nM‐B=Mn(CO)₂(η⁵‐C₅H₅)]; however, when ML_n=Re(CO)₅ the σ‐(halo)boranyl complex decomposes into unidentifiable products. We found through DFT calculations that two electronically and structurally distinct forms of the intermediate σ‐(halo)boranyl complexes exist, one of which easily loses HX and one that does not.     

A lutetium allyl complex that bears a pyridyl-functionalized cyclopentadienyl ligand: dual catalysis on highly syndiospecific and cis-1,4-selective (co)polymerizations of styrene and butadiene

A novel linked‐half‐sandwich lutetium–bis(allyl) complex [(C₅Me₄? C₅H₄N)Lu(η³‐C₃H₅)₂] ( 1 ) attached by a pyridyl‐functionalized cyclopentadienyl ligand was synthesized and fully characterized. Complex 1 in combination with [Ph₃C][B(C₆F₅)₄] exhibited unprecedented dual catalysis with outstanding activities in highly syndiotactic (rrrr>99 %) styrene polymerization and distinguished cis‐1,4‐selective (99 %) butadiene polymerization, respectively. Strikingly, this catalyst system exhibited remarkable activity (396 kg copolymer (mol_Lu h)^?1) for the copolymerization of butadiene and styrene. Irrespective of whether the monomers were fed in concurrent mode or sequential addition of butadiene followed by styrene, diblock copolymers were obtained exclusively, which was confirmed by a kinetics investigation of monomer conversion of copolymerization with time. In the copolymers, the styrene incorporation rate varied from 4.7 to 85.4 mol %, whereas the polybutadiene (PBD) block was highly cis‐1,4‐regulated (95 %) and the polystyrene segment remained purely syndiotactic (rrrr>99 %). Correspondingly, the copolymers exhibited glass transition temperatures (T_g) around ?107 °C and melting points (T_m) around 268 °C; typical values for diblock microstructures. Such copolymers cannot be accessed by any other methods known to date. X‐ray powder diffraction analysis of these diblock copolymers showed that the crystallizable syndiotactic polystyrene (syn‐PS) block was in the toluene δ clathrate form. The AFM micrographs of diblock copolymer showed a remarkable phase‐separation morphology of the cis‐1,4‐PBD block and syn‐PS block. This represents the first example of a lutetium‐based catalyst showing both high activity and selectivity for the (co)polymerization of styrene and butadiene.     

Syndiotactic polymerization of styrene in the presence of CpTiCl2(OC6H4X)/MAO catalytic systems

CpTiCl₂(OC₆H₄X‐p) complexes (where X =­CH₃, Cl, NO₂,; Cp = cyclopentadienyl) activated with methylaluminoxane (MAO) were used in syndiotactic polymerization of styrene. High activity and selectivity for all catalysts were found. The styrene conversion and reaction selectivity depend on the catalyst ageing time and temperature, polymerization temperature and the nature of the substituent in the phenoxy ring. Copyright © 2001 John Wiley & Sons, Ltd.     

Acetalization and Transacetalization Reactions Catalyzed by Ruthenium,Rhodium, and Iridium Complexes with {2‐{{Bis[3‐(trifluoromethyl)phenyl]phosphino}methyl}‐2‐methylpropane‐ 1,3‐diyl}bis[bis[3‐(trifluoromethyl)phenyl]phosphine] (MeC[CH2P(m‐CF3C6H4)2]3)

The complexes [RhCl_(3−n)(MeCN)_n(CF₃triphos)](CF₃SO₃)_n (n=1, 2; CF₃triphos=MeC[CH₂P(m‐CF₃C₆H₄)₂]₃) and [M(MeCN)₃ (CF₃triphos)](CF₃SO₃)_n (M=Ru, n=2; M=Ir, n=3) are catalyst precursors for some typical acetalization and transacetalization reactions. The activity of these complexes is higher than those of the corresponding species containing the parent ligand MeC[CH₂P(C₆H₅)₂]₃(Htriphos). Also the complexes [MCl₃(tripod)] (tripod=Htriphos and CF₃triphos) are active catalysts for the above reactions. The complex [RhCl₂(MeCN)(CF₃triphos)](CF₃SO₃) catalyzes the acetalization of benzophenone.     

Synthesis and polymerization behavior of novel C 1 and C s titanium ansa‐cyclopentadienyl‐amido catalysts for ethylene and propylene polymerization

Four titanium ansa‐cyclopentadienyl‐amido complexes of the general formula [C₅H₃RMe₂SiN(2,6‐Me₂C₆H₃)]TiX₂(R = H,Me,Bz,^tBu;X = NMe₂ or Cl) have been synthesized. The complexes polymerize both ethylene and propylene in the presence of methylaluminoxane or Ph₃CB(C₆F₅)₄–triisobutylaluminum and were most active at lower temperatures. In general, the smaller the substituent on the cyclopentadienyl group, the more active the catalyst. The catalysts were found to be poorly stereoselective for the polymerization of polypropylene, with the tertiary‐butyl substituted catalyst giving a polymer with the greatest [mmmm] (14.2%). The structure of [C₅H₄Me₂SiN(2,6‐Me₂C₆H₃)] Ti(NMe₂)₂ was determined by X‐ray diffraction. The complex crystallizes in the monoclinic system space group P2₁/n, with a = 16.437(2), b = 8.652(3), c = 16.494(4),β = 117.54(2) and Z = 4. Copyright © 2002 John Wiley & Sons, Ltd.     

两个N-己酰基水杨酰肼合镍(Ⅱ)配合物的合成、结构及抗菌活性的研究

The two trinuclear nickel（Ⅱ） complexes, Ni3（C13H15N2O3）2（C5H5N）4 （1） and Ni3（C13H15N2O3）2（C5H5N）2- （C3H7NO）2 （2）, were prepared by the reaction of Ni（OAc）2·4H2O with N-hexanoylsalicylhydrazide. The crystal structures of complexes were determined by X-ray diffraction analysis. Complex 1 takes triclinic symmetry with space group P-1 and cell dimensions of a=0.92377（2） nm, b= 1.08786（6） nm, c= 1.29391（3） nm, α=76.395（4）°, β=78.418（3）°, γ=67.378（4）°, V= 1.15772（7） nm^3, Z= 1,μ= 12.63 cm^-1. Complex 2 belongs to triclinic system and P2（1） space group and the crystallographic data： a= 1.4889（2） nm, b= 1.0389（1） nm, c= 1.4994（2） nm, β= 96.174（4）°, V=2.3058（5） nm^3, Z=2,μ= 12.70 cm^-1. The structures of the two molecules are similar. The three nickel atoms in each molecule of the two title complexes arrange in a strictly linear structure. The central nickel atom of the molecule adopts octahedral configuration, while the two nickel atoms on the two sides adopt square-planar configuration in each molecule. But the central nickel atoms of the two complexes have different axial ligands, which cause a slight difference in the bond distances of the octahedron. The antibacterial activity of compound 1 against seven common bacteria was investigated.     

Ethylene polymerization and ethylene/hexene copolymerization with vanadium(III) catalysts bearing heteroatom‐containing salicylaldiminato ligands

A series of novel vanadium(III) complexes bearing heteroatom‐containing group‐substituted salicylaldiminato ligands [RN?CH(ArO)]VCl₂(THF)₂ (Ar = C₆H₄, R = C₃H₂NS, 2a ; C₇H₄NS, 2c ; C₇H₅N₂, 2d ; Ar = C₆H₂tBu₂ (2,4), R = C₃H₂NS, 2b ) have been synthesized and characterized. Structure of complex 2c was further confirmed by X‐ray crystallographic analysis. The complexes were investigated as the catalysts for ethylene polymerization in the presence of Et₂AlCl. Complexes 2a–d exhibited high catalytic activities (up to 22.8 kg polyethylene/mmol_V h bar), and affording polymer with unimodal molecular weight distributions at 25–70 °C in the first 5‐min polymerization, whereas produced bimodal molecular weight distribution polymers at 70 °C when polymerization time prolonged to 30 min. The catalyst structure plays an important role in controlling the molecular weight and molecular weight distribution of the resultant polymers produced in 30 min polymerization. In addition, ethylene/hexene copolymerizations with catalysts 2a–d were also explored in the presence of Et₂AlCl, which leads to the high molecular weight and unimodal distributions copolymers with high comonomer incorporation. Catalytic activity, comonomer incorporation, and polymer molecular weight can be controlled over a wide range by the variation of catalyst structure and the reaction parameters, such as comonomer feed concentration, polymerization time, and polymerization reaction temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3573–3582, 2009