磺胺甲恶唑的二阶导数差示脉冲极谱法测定

建立了磺胺甲恶唑的二阶导数差示脉冲极谱定量分析方法,磺胺甲恶唑在１０％ＨＣｌ－（硼酸－氯化钾缓冲溶液）－水（５：５：９０）的底液中,于－１．４５Ｖ（ｖｓ．Ａｇ／ＡｇＣｌ）处出现一良好的二阶导数差示脉冲极谱峰,磺胺甲恶唑浓度与其峰高在０．０８～０．８０ｍｍｏｌ／Ｌ范围内呈线性关系（ｐ〈０．０１）,检测限为８．６ｎｍｏｌ／Ｌ。本法简便、快速、灵敏、结果准确。     

锆—7—碘—8—羟基喹啉—5—磺酸—EDTA—表面活性剂体系的荧光光度法研究

在ｐＨ６．２的ＨＡｃ－ＮａＡｃ缓冲溶液中，在溴化十六烷基三甲基胺（ＣＴＭＡＢ）存在下，Ｚｒ（Ⅳ）与７－碘－８－羟基喹啉－５－磺酸（Ｈ２ＱＳＩ）及ＥＤＴＡ形成了四元荧光配合物，其组成为：Ｚｒ：Ｈ２ＱＳＩ：ＥＤＴＡ：ＣＴＭＡＢ＝１：１：１：３。据此建立了锆的选择性好，灵敏度高的荧光测定方法，方法检测限为１．２ｎｇ／ｍＬ。锆的线性范围为１．６ｎｇ～１．０μｇ／ｍＬ。用于铜合金中微量锆的测定，结果令人满意     

火焰原子吸收法测定植物样品中硼与碘

将ＢＯ＾３－３转化为ＢＦ＾－４，ＩＯ＾－３转化为Ｉ＾－以Ｃｄ（ｐｈｅｎ）＾２＋３络合和硝基苯萃取，用火焰原子吸收法间接测定与碘，其特征浓度达０．０１６μｇ／ｍＬ１％Ａ和０．０２８μｇ／ｍＬ１％Ａ，在稻米等样品中作加标回收，硼回收率为９２．８－１０２．４％，碘为９７．２－１０６．７％。     

锆－7－碘－8－羟基喹啉－5－磺酸－EDTA－表面活性剂体系的荧光光度法研究

在ｐＨ６．２的ＨＡｃ－ＮａＡｃ缓冲溶液中，有溴化十六烷基三甲基铵（ＣＴＭＡ８）存在下，Ｚｒ（Ⅳ）与７－碘－８－羟基喹啉－５－磺酸（Ｈ＿２ＱＳＩ）及ＥＤＴＡ形成了四元荧光配合物。其组成为：Ｚｒ：Ｈ＿ＱＳＩ：ＥＤＴＡ：ＣＴＭＡＢ＝１：１：１：３。据此建立了错的选择性好、灵敏度高的荧光测定方法。方法检测限为１．２ｎｇ／ｍＬ。锆的线性范围为１．６ｎｇ～１．０μｇ／ｍＬ。用于铜合金中微量锆的测定，结果令人满意。     

铽-环丙沙星体系的荧光特性及环丙沙星的测定

近中性条件下,铽（Ⅲ）能与环丙沙星（ｃｉｐｒｏｆｌｏｘａｃｉｎ）反应形成１：２的络合物。利用这一反应,建立了简单、快速、灵敏的测定环丙沙星的荧光方法,并且详细讨论了测定的各种条件。测定的最佳条件为：λｅｘ／λｅｍ＝３２５．０／５４５／０ｎｍ,Ｔｂ＾３＋（３．０＊１０－３ｍｏｌ／Ｌ）２．０ｍＬ,ｐＨ＝６．０的ＮａＡｃ－ＨＡｃ缓冲溶液２．０ｍＬ。线性范围１３－１０００μｇ／Ｌ,回归方程为Ｆ＝５．４２＋０．２２０７μｇ／Ｌ）（ｒ＝０．９９８）;检出限为１０μｇ／Ｌ。此方法用于血清及环丙沙星片剂的测定,结果令人满意。     

同步荧光法测定复方新诺明中磺胺甲基异恶唑和甲氧苄氨嘧啶的含量…

本文采用同步荧光技术对复方新诺明中有效成份磺胺甲基异恶唑和甲氧苄氨嘧啶进行测定，在△λ分别为７２ｎｍ和９４ｎｍ的条件下，测定样品中所含有效成份相当于标示量的９５．１２％－１０５．６８％；回收率为９５．５％－９８．１％；线性范围磺胺甲基异恶唑为０．１２５－４．００μｇ／ｍｌ。甲氧苄氨嘧啶为０．１２５－３．００μｇ／ｍｌ；相关系数分别为０．９９７６和０．９９６８。不经分离和掩蔽直接连续测定，效果良好。     

钪－间氯偶氮安替比林络合物吸附波的研究

在ｐＨ４．３０的ＨＡｃ－ＮａＡｃ介质中，钪－间氯偶氮安替比林（ｍ－ＣＡＡ）－硫氰酸钾生成三元络合物，于－０．３５Ｖ（ｖｓ．ＳＣＥ）处出现一尖锐的极谱峰，峰电流与钪离子浓度在０．０２０～０．２０μｇ／ｍＬ范围内呈线性关系，检出限为０．０１０μｇ／ｍＬ．用多种电化学方法研究了极谱波的性质及电极反应机理．方法用于矿样中钪的测定，结果满意     

无铅汽油中痕量铅的快速测定方法

研究了快速测定无铅汽油中痕量铅的方法。在４９０ｎｍ处,测定经氯化四乙胺的氯仿溶９液和碘溶液处理过的汽油与ＰＡＲ．２Ｎａ反应生成的络合物。线性范围为０－２５．２μｇ／ｍＬ,回归方程为Ａ＝０．０１２３４ｃ＋０．４１８８,相关系数为０．９９９２,检出限为０．２６μｇ／ｍＬ。本方法操作简便,测定一次可在２０ｍｉｎ内完成。     

铜（铅）—Ferron—氯化四苯胂络合物吸附波研究

在ＨＣｌ－六次甲基四胺介质中，铜（铅）－Ｆｅｒｒｏｎ－氯化四苯胂络合物产生灵敏的络合吸附波。峰电位分别为－０．４１Ｖ和－０．５７Ｖ。峰电流与铜、铜浓度分别在０．０００４－０．４μｇ／ｍＬ和０．００２－０．８μｇ／ｍＬ之间呈线性关系，检出限分别为０．０００２μｇ／ｍＬＣｕ和０．００１μｇ／ｍＬＰｂ。研究了极谱波的性质和电极反应机理。用拟定的方法连续测定水样和食品中的铜、铜，结果满意。     

铜（铅）－Ferron－氯化四苯胂络合物吸附波研究

在ＨＣｌ￣（－）六次甲基四胺介质（ｐＨ４．６２）中，铜（铅）－Ｆｅｒｒｏｎ氯化四苯胂络合物产生灵敏的络合吸附波。峰电位分别为－１．４１Ｖ和－０．５７Ｖ（Ｕｓ．ＳＣＥ）。峰电流与铜、铅浓度分别在０．０００４～０．４μｇ／ｍＬ和０．００２～０．８μｇ／ｍＬ之间呈线性关系，检出限分别为０．０００２μｇ／ｍＬＣｕ和０．００１μｇ／ｍＬＰｂ。研究了极谱波的性质和电极反应机理。用拟定的方法连续测定水样和食品中的铜、铅，结果满意。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.