Comparison of LC–UV, LC–ELSD and LC–MS Methods for the Determination of Sesquiterpenoids in Various Species of Artemisia

Simple and specific analytical methods for the quantitative determination of sesquiterpenoids from various species of Artemisia plant samples were developed. By LC–UV, LC–ELSD, the separation was achieved by reversed-phase chromatography on a C18 column with water and acetonitrile both containing 0.025% trifluoroacetic acid as the mobile phase. In the LC–MS system, trifluoroacetic acid was replaced by 0.1% formic acid. The wavelength used for quantification of sesquiterpenoids with a diode array detector was 205 nm. The limits of detection by LC–MS was found to be 5, 10, 25, 50, 50 ng mL^?1. The limits of detection by LC–UV and LC–ELSD were found to be 5.0, 3.0, 100, 100, 7.5 μg mL^?1, by LC–UV and 50, 25, 30, 100 and 75 μg mL^?1 by LC–ELSD. LC–mass spectrometry coupled with electrospray ionization (ESI) interface is described for the identification and quantification of sesquiterpenoids in various plant samples. This method involved the use of the [M + H]⁺ ions of sesquiterpenoids in the positive ion mode with extractive ion monitoring.     

Determinations of geniposide using LC/MS/MS methods via forming ammonium and acetate adducts

In this paper, we report method development work to determine geniposide using LC/MS/MS via the formation of positive and negative ion adducts. Geniposide, which has been recognized to have choleretic effects, is the major iridoid glycoside component of Gardenia herbs. To enhance the sensitivity of LC/MS detection of geniposide, a small amount of volatile additives such as ammonium acetate and acetic acid are added into mobile phase solvents to form positive and negative adducts, which can then ionize via electrospray processes. The formation of positive adducts is due to the complexation between geniposide and ammonium ions ([M + NH₄]⁺). The formation of anionic adducts [M + CH₃COO]⁻ is believed to occur via hydrogen bonds bridging acetate ions and glucose groups on the geniposide molecule. Mobile phase solvents containing acetonitrile and aqueous solution (0.2 mM ammonium acetate or 0.1% acetic acid) at the ratio 15: 85 are employed to elute geniposide using C8 reverse phase liquid chromatography columns with electrospray tandem mass spectrometry determinations. Using geniposide standards, the methods are validated at the concentration ranges of 5 to 1000 ng/mL and 20 to 5000 ng/mL using ammonium and acetate adducts respectively. The correlation coefficients of the standard curves are 0.9999 using both ammonium and acetate adducts. The detection limits of using ammonium and acetate adducts are 1 and 5 ng/mL respectively. The measurement accuracy and precision of using ammonium adducts are within 12% and 3% respectively, whereas the accuracy and precision are within 6 and 11% respectively using acetate adducts. When the validated calibration curves of the ammonium adduct of geniposide are used to determine spiked control samples in rat blood dialysates, the determination errors of accuracy and precision are within 12% and 10% respectively.     

A portable lab‐on‐a‐chip instrument based on MCE with dual top–bottom capacitive coupled contactless conductivity detector in replaceable cell cartridge

A new design for a compact portable lab‐on‐a‐chip instrument based on MCE and dual capacitively coupled contactless conductivity detection (dC⁴D) is described. The instrument is battery powered with total dimension of 14 × 25 × 8 cm³ (w × l × h), and weighs 1.2 kg. The device consists of a front electrophoresis compartment which has the chip holder and the chip, the associated high‐voltage electrodes for electrophoresis injection and separation and the detector. The detection cell is integrated into the device housing with an exchangeable plug‐and‐play cartridge format. The design of the dC⁴D cell has been optimized for maximum performance. The cartridge includes the top–bottom excitation and pick up electrodes incorporated into the cell and connected to push‐pull self‐latching pins that are insulated with plastic. The metal frame of the cartridge is grounded completely to eliminate electronic interferences. The cartridge is designed to clamp a thin fluidic chip at the detection point. The cartridges are replaceable whereby different cartridges have different detection electrode configurations to employ according to the sensitivity or resolution needed in the specific analytical application. The second compartment consists of all the electronics, data acquisition card, high‐voltage modules of up to ±5 kV both polarity, and batteries for 10 h of operation. The improved detector performance is illustrated by the electrophoresis analysis of six cations (NH₄⁺, K⁺, Ca²⁺, Na⁺, Mg²⁺, Li⁺) with a detection limit of approximately 5 μM and the analysis of the anions (Br^?, Cl^?, NO₂^?, NO₃^?, SO₄^2?, F^?) with a detection limit of about 3 μM. Analytical capabilities of the instrument for food and medical applications were evaluated by simultaneous detection of organic and inorganic acids in fruit juice and inorganic cations and anions in rabbit blood samples and human urine samples are also demonstrated.     

Determination of flurbiprofen in pharmaceutical formulations by UV spectrophotometry and liquid chromatography

In this study, a new and rapid UV spectrophotometric (UV) method and a reversed phase high performance liquid chromatographic (LC) method were developed for quantitative estimation of flurbiprofen, a non-selective, non-steroidal, anti-inflammatory drug (NSAID), in pure form and in pharmaceutical dosage form. The solvent system, wavelength of detection, chromatographic conditions were optimized in order to maximize the sensitivity of both the proposed methods. The linear regression equations obtained by least square regression method were Abs=7.5906×10⁻² concentration (μg/ml) + (−) 4.6210×10⁻² for the UV method, and peak area=1.2652×10² concentration (ng/ml) + 1.4830×10³ for the LC method. The detection limit as per the error propagation theory was found to be 0.34 μg/ml for UV method and 15 ng/ml for LC method. The developed methods were successfully employed with high degree of precision and accuracy for the estimation of total drug content in two commercial ophthalmic drops of flurbiprofen. The results of analysis were treated statistically, as per USP 2000 and International Conference on Harmonization (ICH) guidelines for validation of analytical procedures, and by recovery studies. The results obtained from UV method were comparable with those obtained by using LC. It was concluded that both the developed methods are equally accurate, sensitive, precise, reproducible, robust and rugged and could be applied directly and easily to the pharmaceutical preparations of flurbiprofen. However, LC method is useful at very low level (ng/ml), whereas UV method is suitable at μg/ml level.     

Two dimensional assisted liquid chromatography – a chemometric approach to improve accuracy and precision of quantitation in liquid chromatography using 2D separation,dual detectors,and multivariate curve resolution

Comprehensive two-dimensional liquid chromatography (LC × LC) is rapidly evolving as the preferred method for the analysis of complex biological samples owing to its much greater resolving power compared to conventional one-dimensional (1D-LC). While its enhanced resolving power makes this method appealing, it has been shown that the precision of quantitation in LC × LC is generally not as good as that obtained with 1D-LC. The poorer quantitative performance of LC × LC is due to several factors including but not limited to the undersampling of the first dimension and the dilution of analytes during transit from the first dimension (¹D) column to the second dimension (²D) column, and the larger relative background signals. A new strategy, 2D assisted liquid chromatography (2DALC), is presented here. 2DALC makes use of a diode array detector placed at the end of each column, producing both multivariate ¹D and two-dimensional (2D) chromatograms. The increased resolution of the analytes provided by the addition of a second dimension of separation enables the determination of analyte absorbance spectra from the ²D detector signal that are relatively pure and can be used to initiate the treatment of data from the first dimension detector using multivariate curve resolution–alternating least squares (MCR–ALS). In this way, the approach leverages the strengths of both separation methods in a single analysis: the ²D detector data is used to provide relatively pure analyte spectra to the MCR–ALS algorithm, and the final quantitative results are obtained from the resolved ¹D chromatograms, which has a much higher sampling rate and lower background signal than obtained in conventional single detector LC × LC, to obtain accurate and precise quantitative results. It is shown that 2DALC is superior to both single detector selective or comprehensive LC × LC and 1D-LC for quantitation of compounds that appear as severely overlapped peaks in the ¹D chromatogram – this is especially true in the case of untargeted analyses. We also anticipate that 2DALC will provide superior quantitation in targeted analyses in which unknown interfering compounds overlap with the targeted compound(s). When peaks are significantly overlapped in the first dimension, 2DALC can decrease the error of quantitation (i.e., improve the accuracy by up to 14-fold compared to 1D-LC and up to 3.8-fold compared to LC × LC with a single multivariate detector). The degree of improvement in performance varies depending upon the degree of peak overlap in each dimension and the selectivities of the spectra with respect to one another and the background, as well as the extent of analyte dilution prior to the ²D column.     

Determination of jasmonic acid in <Emphasis Type="Italic">Lemna minor</Emphasis> (L.) by liquid chromatography with fluorescence detection

A new method is described for the determination of endogenous jasmonic acid (JA) in Lemna minor plant extracts using liquid chromatography (LC) with fluorescence detection. Plant tissues were extracted and derivatised using 9-anthryldiazomethane (ADAM reagent) prepared in situ. Accuracy and precision were improved by using the internal standard dihydrojasmonic acid (dh-JA) for the correction of JA losses during sample preparation steps. Liquid chromatography–mass spectrometry (LC/MS) analysis of ADAM derivatives of JA and dh-JA confirmed that a single molecule of JA and dh-JA was coupled with one molecule of reagent. Derivatives of JA and dh-JA were separated with gradient elution on a C₁₈ reversed-phase column using acetonitrile/water as a mobile phase and detected by a fluorescence detector at excitation and emission wavelengths of 254 and 412 nm, respectively. The detection limits of JA and dh-JA were 2.9 ng mL⁻¹ and 3.7 ng mL⁻¹ per 50-μL injection. The method is reproducible and selective and yields single peaks for each compound regardless of isomer. The specificity and accuracy of the proposed LC/FD method was confirmed by liquid chromatography–TurboIon Spray tandem mass spectrometric (LC/MS/MS) analysis of free JA in Lemna minor samples under multiple reaction monitoring conditions.     

Improved method for the determination of sulfur components in natural gas

Determination of trace concentrations of sulfur components in natural gas is a true analytical challenge. Only analytical procedures based on gas chromatography can meet the sensitivity and accuracy requirements dictated by environmental regulation institutions and modern chemical industry. In the present contribution the sample pretreatment and chromatographic separation steps have been evaluated and optimized based on the use of a flamebased sulfur chemiluminescence detector (SCD) for target compound detection. The proposed instrument consists of a programmed temperature vaporizing (PTV) injector employing a liner packed with Chromosorb 104, a 4 μm thick film apolar column and a flame-based SCD. Using a 13 mL sample loop the detection limit achievable with the new method is 3 μg S/m³. The precision of replicate measure. ments is generally in the range of 5–15% relative standard deviation. Lower detection limits can be achieved by preconcentrating larger sample volumes, e.g. 100 mL.     

Dual fluorescence/contactless conductivity detection for microfluidic chip

A new dual detection system for microchip is reported. Both fluorescence detector (FD) and contactless conductivity detector (CCD) were combined together and integrated on a microfluidic chip. They shared a common detection position and responded simultaneously. A blue light-emitting diode was used as excitation source and a small planar photodiode was used to collect the emitted fluorescence in fluorescence detection, which made the device more compact and portable. The coupling of the fluorescence and contactless conductivity modes at the same position of a single separation channel enhanced the detection characterization of sample and offered simultaneous detection information of both fluorescent and charged specimen. The detection conditions of the system were optimized. K⁺, Na⁺, fluorescein sodium, fluorescein isothiocyanate (FITC) and FITC-labeled amino acids were used to evaluate the performance of the dual detection system. The limits of detection (LOD) of FD for fluorescein Na⁺, FITC, FITC-labeled arginine (Arg), glycine (Gly) and phenylalanine (Phe) were 0.02 μmol L⁻¹, 0.05 μmol L⁻¹, 0.16 μmol L⁻¹, 0.15 μmol L⁻¹, 0.12 μmol L⁻¹ respectively, and the limits of detection (LOD) of CCD achieved 0.58 μmol L⁻¹ and 0.39 μmol L⁻¹ for K⁺ and Na⁺ respectively.     

Daptomycin determination by liquid chromatography–mass spectrometry in peritoneal fluid, blood plasma, and urine of clinical patients receiving peritoneal dialysis treatment

A 13-min LC–MS method was developed for the determination of daptomycin, a new potent antibiotic, in peritoneal fluid, blood plasma, and urine of patients receiving renal replacement therapy. Chromatography was performed on a C₁₈ column and detection was performed by a single-quadrupole mass spectrometer coupled to LC via an electrospray interface (ESI). The column effluent was also monitored at 370 nm using a photodiode-array detector. The developed method provided a linear dynamic range for concentrations from 0.5 μg mL⁻¹ to 100 μg mL⁻¹. Method precision and accuracy were found to be satisfactory for clinical application, thus the method was successfully used for the analysis of daptomycin in pharmacokinetic studies. The drug was preventively administered against Gram-positive infections to 19 clinical patients undergoing peritoneal dialysis. Peritoneal fluid, blood plasma, and urine samples were collected at 13 time points over a period of 48 h. Clinical samples were analysed following simple sample-preparation procedures and daptomycin was unambiguously detected and quantified.     

Spectroscopical and Electrochemical Behavior of New Mixed-Ligand Cyclometalated Rh(III) Complexes

The absorption spectra, luminescence spectra, excited-state lifetimes, and electrochemical behavior of the cyclometalated [Rh(ppz)₂bpy]+^, [Rh(3-Cl-ppz)₂(bpy)]⁺, [Rh(4-NO2-ppz)₂(bpy)]⁺, [Rh(ppz)₂(biq)]⁺ and [Rh(4-NO2-ppz)₂(biq)]⁺ complexes (ppz^?, 3-Cl-ppz^?, and 4-NO₂-ppz^? are the ortho-C-deprotonated forms of 1-phenylpyrazole, l-(3-chlorophenyl)pyrazole and l-(4-nitrophenyl)pyrazole, respectively) have been investigated. The results obtained have been compared with those concerning the free protonated ligands and some previously studied mixed-ligand cyclometalated Rh(III) complexes. Luminescence originates from the lowest ligand-centered (LC) excited state, which involves the diimine ligands in all cases except for [Rh(4-NO2-ppz)₂(bpy)]⁺, where it involves the ortho-metalating ligand. s. In the absorption spectra, LC and metal-to-ligand charge-transfer (MLCT) bands, involving the diimine and/or the ortho-metalating ligands, have been assigned, and correlations between spectroscopic and electrochemical data are discussed.     

Detection of organic toxic pollutants in water and waste-water by liquid chromatography and in vitro cytotoxicity tests

In vitro toxicity tests with fish cell lines have proved to be correlated with in vivo toxicity tets on fish. A group of toxicity tests on RTG-2 cell line (a fibroblastic line derived from rainbow trout) has been standardized in order to enhance reproducibility and sensitivity. The liquid chromatographic (LC) separation of organic chemicals from industrial effluents and polluted waters and the use of in vitro toxicity tests on RTG-2 as a biological detector of toxicity in the eluted peaks are reported. Effluents and polluted waters were concentrated, if required, using Sep-Pak C₁₈ cartridges, and analysed by reversed-phase LC using a 30-cm C₁₈ column with an acetonitrile gradient from 10 to 100% in water in 60 min at a flow-rate of 1 ml min^?1 and UV detection at 254 and 280 nm. The cytotoxicity test was adapted to use 20-μl fractions of acetonitrile-water mixtures, allowing toxicity detection every 12 s with eight replicates per sample (or every 5 s with four replicates).     

Determination of steroids by liquid chromatography/mass spectrometry

On-line atmospheric pressure chemical ionization (APCI) and electrospray ionization (ESI) liquid chromatography/mass spectrometry (LC/MS) were evaluated for the analysis of a variety of steroids. Steroids were classified into three major groups based on the spectra and the sensitivities observed: (I) those containing a 3-one, 4-ene functional group, (II) those containing at least one ketone group without conjugation, and (III) those containing hydroxy group(s) only. In the APCI mode, the best sensitivity and the lowest detection limit for all three groups were obtained by using a mobile phase consisting of methanol and 1%–2% acetic acid in water. The APCI spectra were characterized by MH⁺, MH⁺-H₂O, MH⁺-2H₂O, etc., with the degree of H₂O loss being compound dependent: group I steroids produced stable MH⁺ and group III steroids showed extensive water loss. In the electrospray mode the best sensitivity and the lowest detection limit for the first two groups were obtained when pure methanol and water were used as the mobile phase. This condition produced abundant stable MNa⁺ due to ubiquitous sodium. Detection limits in the 5–15 pg range can be easily achieved using ESI LC/MS. Addition of ammonium acetate or use of acetonitrile in the mobile phase, common in the LC/MS analysis of steroids, decreased the sensitivity for the group I and II steroids and thus should be avoided. For group III steroids, the detection limit can be improved by the addition of acetic acid to the mobile phase.     

Coumarins as new matrices for matrix-assisted laser-desorption/ionization Fourier transform ion cyclotron resonance mass spectrometric analysis of hydrophobic compounds

Hydrophobic compounds with hydroxyl, aldehyde or ketone groups are generally difficult to detect using matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS), because these compounds have low proton affinity and are poorly ionized by MALDI. Herein, coumarins have been used as new matrices for MALDI-MS analysis of a variety of hydrophobic compounds with low ionization efficiency, including steroids, coenzyme Q10, a cyclic lipopeptide and cholesterol oleate. Five coumarins, including coumarin, umbelliferone, esculetin, 7-hydroxycoumarin-3-carboxylic acid (HCA) and 6,7-dihydroxycoumarin-3-carboxylic acid (DCA), were compared with the conventional matrices of 2,5-dihydroxybenzoic acid (DHB) and α-cyano-4-hydroxycinnamic acid (CHCA). Coumarins with hydroxyl or carboxylic acid groups enabled detection. Taking DCA as an example, this matrix proved to be superior to DHB or CHCA in detection sensitivity, stability, spot-to-spot and sample-to-sample reproducibility, and accuracy. DCA increased the stability of the target compounds and decreased the loss of water. The [M + Na]⁺ peaks were observed for all target compounds by adding NaCl as an additive, and the [M − H₂O + H]⁺ and [M + H]⁺ peaks decreased. DCA was selected for the identification of sterols in yeast cells, and thirteen sterols were detected by Fourier transform ion cyclotron resonance (FT ICR) mass spectrometry. This work demonstrates the potential of DCA as a new matrix for detection of hydrophobic molecules by MALDI-MS and provides an alternative tool for screening sterols in antifungal research.     

A New Reagent for Determination of Isocyanates in Working Atmospheres by HPLC Using UV or Fluorescence Detection

Abstract

A new liquid chromatographic method with increased sensitivity has been developed for the determination of isocyanates common in industrial environments. The isocyanates are converted to stable urea derivatives by reaction with 9-(N-methylaminomethyl)-anthracene. These derivatives were analyzed using high performance liquid chromatography on a bonded octadecylsilyl phase using isocratic elution with acetonitrile/water and detected either by a UV or a fluorescence detector. The method was applied to toluene 2, 4- and 2, 6-diisocyanate (2, 4- and 2, 6-TDI), hexamethylene diisocyanate (HDI) and 4, 4-diphenylmethane diisocyanate (MDI).

The influence of various salts on the retention of the reagent amine was studied, as well as the separation of the urea derivatives on different C₁₈-phases. The detection limit is about 1 · 10^?4 mg/m³ for the isocyanates investigated, using either UV or fluorescence detection. This means that the new method is ten to twenty times more sensitive than the previously described reversed phase LC method, which utilized N-4-nitrobenzyl-N-n-propylamine as reagent.     

Ion chromatography with the indirect ultraviolet detection of alkali metal ions and ammonium using imidazolium ionic liquid as ultraviolet absorption reagent and eluent

Indirect ultraviolet detection was conducted in ultraviolet‐absorption‐agent‐added mobile phase to complete the detection of the absence of ultraviolet absorption functional group in analytes. Compared with precolumn derivatization or postcolumn derivatization, this method can be widely used, has the advantages of simple operation and good linear relationship. Chromatographic separation of Li⁺, Na⁺, K⁺, and NH₄⁺ was performed on a carboxylic acid base cation exchange column using imidazolium ionic liquid/acid/organic solvent as the mobile phase, in which imidazolium ionic liquids acted as ultraviolet absorption reagent and eluting agent. The retention behaviors of four kinds of cations are discussed, and the mechanism of separation and detection are described. The main factors influencing the separation and detection were the background ultraviolet absorption reagent and the concentration of hydrogen ion in the ion chromatography‐indirect ultraviolet detection. The successful separation and detection of Li⁺, Na⁺, K⁺, and NH₄⁺ within 13 min was achieved using the selected chromatographic conditions, and the detection limits (S/N = 3) were 0.02, 0.11, 0.30, and 0.06 mg/L, respectively. A new separation and analysis method of alkali metal ions and ammonium by ion chromatography with indirect ultraviolet detection method was developed, and the application range of ionic liquid was expanded.     

Piezoelectric Crystal Liquid Flow Detection Systems Based on Alkyl (C18)‐Benzo‐15‐Crown 5 for Organic Compounds and Metal Ions

A water in soluble long‐chain crown ether alkyl (C18)‐benzo‐15‐crown‐5 was synthesized and applied as a coating material on quartz crystal membranes of a liquid flow piezo electric crystal sensor. The oscillating crown ether‐coated piezo electric (PZ) crystal with a home‐made computer inter face was prepared as a liquid chromato graphic (LC) detector for organic species and metal ions in aqueous solutions. The oscillating frequency of the quartz crystal decreased due to the adsorption of organic molecules or metal ions on crown ether molecules. Effects of functional group, molar mass, steric hindrance, and polarity of organic molecules on frequency responses of the crown ether coated PZ crystal detector were investigated. The frequency responses of the crown ether coated PZ crystal detector for various molecules were in the order: amines > carboxylic acids > alcohols > ketones. The crown ether PZ detector also exhibited good sensitivity for some heavy metal ions and the frequency shifts were in the order: Cr³⁺ » Pb²⁺ > Co²⁺ > Cd²⁺ > Ni²⁺ > Cu²⁺. The crown ether coated piezo electric crystal LC detector demonstrated low detection limits for various polar organic molecules, e.g., 6.0 × 10^?5 M for propylamine, and metal ions, e.g., 2.9 × 10^?5 M (1.8 ppm) for Cu²⁺; the crown ether PZ detector also gave good reproducibility when re used. A quite sensitive electrochemical quartz crystal microbalance (EQCM) detection system was also set‐up for detecting trace heavy metal ions in solutions. The variation in frequency of the PZ crystal and the diffusion current were observed simultaneously after the reduction in heavy metal ions such as Cu²⁺ and Ni²⁺. The EQCM detection system exhibited fairly good sensitivity, e.g., 112 Hz/ppm for Cu²⁺ and a good detection limit, e.g., 0.13 ppm for Cu²⁺ ions. Comparison between EQCM and PZ detection systems was made and discussed.     

Simultaneous Determination Baicalin and Forsythin in Shuanghuanglian Oral Liquid by HPLC/DAD and LC‐ESI‐MS

Rapid, simple and reliable HPLC/DAD and LC‐ESI‐MS methods for the simultaneous determination of baicalin and forsythin in the traditional Chinese medicinal preparation Shuanghuanglian oral liquid were described and validated. The separation condition for HPLC/DAD was optimized using a BDS hypersil C18 column (Thermo, 2.1 × 150 mm, particle size 5 μm) by gradient elution using methanol‐0.2 % ammonium acetate as the mobile phase. The suitable detection wavelength was set at 277 nm for the quantitative analysis of baicalin and forsythin in this method. Some operational parameters of the ESI interface were optimized, negative m/z 445[M?H]^? for baicalin and negative m/z 593[M+CH₃COO]^? for forsythin, positive m/z 447[M+H]⁺ for baicalin and positive m/z 552[M+NH 4]⁺ for forsythin, respectively. These HPLC/DAD and LC‐ESI‐MS methods were validated in terms of recovery, linearity, accuracy and precision (intra‐ and inter‐day validation). These methods can be used as a complementary method for the commercial quality control of Shuanghuanglian oral liquid and its pharmaceutical preparations.     

Analytical atomic spectroscopy using ion trap devices

Investigations using ion trap devices for analytical atomic spectroscopy purposes have focused on the use of an inductively coupled plasma (ICP) ion source with ion trap mass spectrometric (ITMS) detection. Initial studies were conducted with an instrument assembled by simply appending an ion trap as the detector to a fairly conventional ICP/MS instrument, i.e. leaving an intermediate linear quadrupole between the plasma source and the ion trap. The principal advantages found with this system include the destruction of nearly all problematic and typical ICP/MS polyatomic ions (e.g., ArH⁺, ArO⁺, ArCl⁺, Ar₂⁺, etc) and a dramatic reduction of the primary plasma source ion, Ar⁺. These results prompted the development of a second-generation plasma source ion trap instrument in which direct coupling of the ICP and ion trap has been effected (i.e. no intermediate linear quadrupole); the same performance benefits have been largely preserved. Initial operation of this instrument is described, characterized, and compared to the originally described ICP/ITMS and conventional ICP/MS systems. In addition, experiments aimed at improving ICP/ITMS sensitivity and selectivity using broadband resonance excitation techniques are described. Finally, the potential for laser optical detection of trapped ions for analytical purposes is speculated upon.     

Bestimmung von Trialkylbleispecies in Urin

Zusammenfassung Für die Bestimmung von Trialkylbleispecies (Me₃Pb⁺ und Et₃Pb⁺) in Urin wird ein Analysenverfahren vorgestellt, das aus einem Anreicherungsschritt, einer hochdruckflüssigkeits-chromatographischen Trennung und dem Nachweis mit einem chemischen Reaktionsdetektor besteht. Die Anreicherung erfolgt aus der auf pH 10 eingestellten Urinprobe durch Adsorption an Kieselgel. Das Adsorbermaterial wird mit Borat-Puffer und Wasser gewaschen und die Bleispecies mit einem 10% Methanol enthaltenden Acetat-Puffer (pH 3,7) eluiert. Nach Verdünnen und gleichzeitigem Einstellen des Eluats auf pH 8 mit Borat-Puffer wird eine weitere Anreicherung auf einer Nucleosil 10-C₁₈ Vorsäule durchgeführt. Die Vorsäule ist in eine HPLC-Anlage so integriert, daß die Bleispecies durch eine Säulenschaltung im Backflush direkt auf die analytische Säule eluiert, getrennt und mit dem chemischen Reaktionsdetektor nachgewiesen werden können. Die Nachweisgrenzen für das gesamte Analysenverfahren betragen bei einem Probenvolumen von 50 ml Urin 150 pg/ml für Me₃Pb⁺ und 200 pg/ml für Et₃Pb⁺.

---

Determination of trialkyllead species in urine

Summary An analytical method has been developed for the determination of trialkyllead species (Me₃Pb⁺ and Et₃Pb⁺) in urine. The procedure consists of an enrichment step, a separation by HPLC, and the detection by a chemical reaction detector. The urine sample is adjusted to pH 10 and the lead species are adsorbed on silica gel, washed with boratebuffer and water, and finally eluted with an acetate-buffer (pH 3.7) containing 10% of methanol. For further enrichment by a pre-column technique the eluate is diluted and simultaneously adjusted to pH 8 by a borate-buffer. This eluate is injected onto a Nucleosil 10-C₁₈ pre-column, which is integrated in a HPLC-system. The lead species are then eluted in a backflush mode onto the analytical column by column-switching. Separation takes place on a RP-C₁₈ stationary phase followed by the detection with an on-line coupled chemical reaction detector. Starting with 50 ml sample volume the limits of detection for the whole analytical procedure are 150 pg/ml for Me₃Pb⁺and 200 pg/ml for Et₃Pb⁺.

---

---

Herrn Prof. Dr. H. Hartkamp zum 60. Geburtstag gewidmet

---

Der Deutschen Forschungsgemeinschaft sind wir für die freundliche Unterstützung zu Dank verpflichtet (Ne 176-4).