Properties of polymer blends and triblock copolymers obtained by neutron scattering

Static and dynamic scattering properties of polymer blends and block copolymers are examined within the random phase approximation (RPA). A self-consistent theoretical scheme for a simultaneous analysis of elastic and quasielastic scattering data is presented. The case of a triblock copolymer made of an ordinary central block and two deuterated lateral blocks in a matrix of deuterated homopolymers is considered in detail. The theoretical predictions of the RPA are compared with the experimental data obtained by elastic neutron scattering experiments using mixtures of deuterated poly(dimethylsiloxane) homopolymers and copolymers made of three blocks of approximately equal sizes. The lateral blocks are deuterated poly(dimethylsiloxane) and the central one is an ordinary poly(dimethylsiloxane). A good agreement is found in the whole range of wavevectors covered by the experiments. An extension of the RPA to the analysis of the dynamical scattering data for the same systems is put forward. It is shown how the time relaxations of the bare response functions obtained from the single chain dynamics are used to extract the intermediate scattering function characterizing the system of interacting chains. © 1996 John Wiley & Sons, Inc.     

The structure and phase transitions in polymer blends,diblock copolymers and liquid crystalline polymers: The Landau-Ginzburg approach

The polymer systems are discussed in the framework of the Landau-Ginzburg model. The model is derived from the mesoscopic Edwards Hamiltonian via the conditional partition function. We discuss flexible, semiflexible and rigid polymers. The following systems are studied: polymer blends, flexible diblock and multi-block copolymer melts, random copolymer melts, ring polymers, rigid-flexible diblock copolymer melts, mixtures of copolymers and homopolymers and mixtures of liquid crystalline polymers. Three methods are used to study the systems: mean-field model, self consistent one-loop approximation and self consistent field theory. The following problems are studied and discussed: the phase diagrams, scattering intensities and correlation functions, single chain statistics and behavior of single chains close to critical points, fluctuations induced shift of phase boundaries. In particular we shall discuss shrinking of the polymer chains close to the critical point in polymer blends, size of the Ginzburg region in polymer blends and shift of the critical temperature. In the rigid-flexible diblock copolymers we shall discuss the density nematic order parameter correlation function. The correlation functions in this system are found to oscillate with the characteristic period equal to the length of the rigid part of the diblock copolymer. The density and nematic order parameter measured along the given direction are anticorrelated. In the flexible diblock copolymer system we shall discuss various phases including the double diamond and gyroid structures. The single chain statistics in the disordered phase of a flexible diblock copolymer system is shown to deviate from the Gaussian statistics due to fluctuations. In the one loop approximation one shows that the diblock copolymer chain is stretched in the point where two incompatible blocks meet but also that each block shrinks close to the microphase separation transition. The stretching outweights shrinking and the net result is the increase of the radius of gyration above the Gaussian value. Certain properties of homopolymer/copolymer systems are discussed. Diblock copolymers solubilize two incompatible homopolymers by forming a monolayer interface between them. The interface has a positive saddle splay modulus which means that the interfaces in the disordered phase should be characterized by a negative Gaussian curvature. We also show that in such a mixture the Lifshitz tricritical point is encountered. The properties of this unusual point are presented. The Lifshitz, equimaxima and disorder lines are shown to provide a useful tool for studying local ordering in polymer mixtures. In the liquid crystalline mixtures the isotropic nematic phase transition is discussed. We concentrate on static, equilibrium properties of the polymer systems.     

Effect of selected structural parameters of styrene–butadiene block copolymers on their compatibilization efficiency in polystyrene/polybutadiene blends

The effects of the block length and block number of linear styrene–butadiene (S–B) block copolymers on their compatibilization efficiency in blending polystyrene with polybutadiene were studied. For this purpose, two sets of model S–B copolymers and both homopolymers were prepared by anionic polymerization. Diblocks, triblocks, or pentablocks of S–B copolymers were blended with these homopolymers, and the structures and some end‐use properties of the blends were determined. The supramolecular structure (determined by small‐angle X‐ray scattering), morphology (determined by transmission and scanning electron microscopy), and stress‐transfer characteristics (impact and tensile strengths) of the blends were chosen as criteria for the compatibilization efficiency of the copolymers used. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2612–2623, 2002     

Structure and properties of propylene-ethylene block copolymers and the corresponding blends

Structure and properties of presumed polypropylene(PP)-b-polyethylene(PE) block copolymers (PPPE) and the corresponding blends (PP/PE) have been investigated by wide-angle x-ray scattering (WAXS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), torsional pendulum apparatus, and other techniques measuring mechanical properties. Crystallinity, morphological structure, and mechanical properties of the block copolymers and blends vary with the PP and PE compositions. Compared with PP homopolymers and PP/PE blends, PP and PE segments in PP-PE block copolymers have a reduced crystallinity, especially PE segments. An additional peak at about ?40°C is observed in dynamic relaxation spectra; substantially different morphology is revealed; and mechanical properties are greatly improved for the sequentially copolymerized PP-PE block copolymers, indicating the existence of PP-PE block structure.     

Liquid-crystal Assembly of Semiflexible-coil/Homopolymer Blends: a Dissipative Particle Dynamics Study

The liquid-crystal assembly of semiflexible-coil diblock copolymers with coil or semiflexible homopolymers is studied by dissipative particle dynamics simulation. Phase diagrams of the blends and orientation ordering parameters among semiflexible blocks are constructed as a function of chain stiffness and homopolymer volume fraction. For semiflexible-coil/coil blends with varying stiffness of semiflexible blocks, we display the rich phase behaviors of the system transited from coil-coil/coil to rod-coil/coil blends. The disorder-lamellae or lamellae-liquid crystalline transition and “dry brush” phenomenon induced by coil homopolymers are observed. For semiflexible-coil/semiflexible blends, adding semiflexible homopolymers also leads to a disorder-order transition and even a transition between monolayer and bilayer smectic-A phase. The results demonstrate that blending homopolymers into semiflexible copolymers can induce liquid-crystal assembly and even improve the orientation ordering of semiflexible blocks effectively.     

Organizing thermodynamic data obtained from multicomponent polymer electrolytes: Salt‐containing polymer blends and block copolymers

The objective of this review is to organize literature data on the thermodynamic properties of salt‐containing polystyrene/poly(ethylene oxide) (PS/PEO) blends and polystyrene‐b‐poly(ethylene oxide) (SEO) diblock copolymers. These systems are of interest due to their potential to serve as electrolytes in all‐solid rechargeable lithium batteries. Mean‐field theories, developed for pure polymer blends and block copolymers, are used to describe phenomenon seen in salt‐containing systems. An effective Flory–Huggins interaction parameter, χ_eff , that increases linearly with salt concentration is used to describe the effect of salt addition for both blends and block copolymers. Segregation strength, χ_effN , where N is the chain length of the homopolymers or block copolymers, is used to map phase behavior of salty systems as a function of composition. Domain spacing of salt‐containing block copolymers is normalized to account for the effect of copolymer composition using an expression obtained in the weak segregation limit. The phase behavior of salty blends, salty block copolymers, and domain spacings of the latter systems, are presented as a function of chain length, composition and salt concentration on universal plots. While the proposed framework has limitations, the universal plots should serve as a starting point for organizing data from other salt‐containing polymer mixtures. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1177–1187     

Analysis of organosilicone copolymers by gradient polymer elution chromatography with evaporative light scattering detection

Organosilicone copolymers have found numerous applications in the cosmetics, detergent and coating industries. Coupling a polar polymer (like polyglycols) to a non-polar silicone gives anchorage and emulsification capabilities to the polymer. When coupling a silicone polymer to a polyglycol, the copolymer formed differs from the starting polymers by a single bond which is often difficult to evidence using spectroscopic techniques such as NMR or infrared, especially when the polymers have a high molecular mass. Gradient polymer elution chromatography (GPEC) coupled to an evaporative light scattering detector was developed for the characterization of copolymers based on their chemical composition distribution. Different block and graft polyglycol-silicone copolymers were successfully characterized by GPEC and residual homopolymers have been easily quantified.     

Diffusion in microstructured block copolymer melts

Forced Rayleigh scattering has been employed to measure tracer and self-diffusion in block copolymer melts, for both entangled and unentangled systems, and in both the ordered and disordered states. It is shown that entanglements are particularly effective in retarding the motion of copolymers parallel to the interface between microdomains. The mechanisms of “activated reptation” and “block retraction” are proposed for parallel diffusion. The importance of large amplitude composition fluctuations in the disordered state near the ordering transition is also demonstrated, for both copolymer and homopolymer tracers; the results suggest that copolymer tracers are more affected than homopolymers of comparable molecular weight.     

Synthesis of tertiary amine‐based pH‐responsive polymers by RAFT Polymerization

Well‐defined tertiary amine‐based pH‐responsive homopolymers and block copolymers were synthesized via reversible addition‐fragmentation chain transfer (RAFT) polymerization using 4‐cyanopentanoic acid dithiobenzoate (CPAD) as the RAFT agent for homopolymers and a poly(ethylene glycol) (PEG) macro‐RAFT agent for the block copolymers. ¹H NMR and gel permeation chromatography results confirmed the successful synthesis of these homopolymers and block copolymers. Kinetics studies indicated that the formation of both the homopolymers and the block copolymers were well defined. The pKa titration experiments suggested that the homopolymers and the related block copolymers have a similar pKa. The dynamic light scattering investigation showed that all of the block copolymers underwent a sharp transition from unimers to micelles around their pKa and the hydrodynamic diameter (D_h) was not only dependent on the molecular weight but also on the composition of the block copolymers. The polymer solution of PEG‐b‐PPPDEMA formed the largest micelle compare to the PEG‐b‐PDPAEMA and PEG‐b‐PDBAEMA with a similar molecular weight. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1010–1022     

Dynamic light scattering from ternary polymer blends: critical behavior and bicontinuous microemulsions

We have used dynamic light scattering to study the dynamics of ternary polymer blends consisting of poly(dimethylsiloxane) (PDMS) and poly(ethylethylene) (PEE) homopolymers and a PDMS‐PEE diblock copolymer nearly symmetric in composition. The intensity autocorrelation functions for the binary blend are single‐exponential, and the associated correlation length ξ scales with reduced temperature ϵ in accordance with the Ising universality class (i.e., ξ ∼ ϵ^−ν, with ν = 0.63). An addition of copolymer depresses the critical temperature, but also increases the magnitude of ν. For compositions within the microemulsion channel, ξ exhibits a distinct maximum with decreasing temperature, near the Lifshitz line obtained from the static structure factor. For a particular composition, there is a “re‐entrant” microemulsion, as the system passes into and then out of the phase‐separated region upon cooling.     

Dynamical relaxations in mixtures of different polymers and nonsymmetrical copolymers in solution

Dynamical relaxation properties of nonsymmetrical mixtures of homopolymers and of copolymers in solution are examined. In particular, examples of bimodal mixtures in solution, ternary mixtures of two different homopolymers and a solvent, and nonsymmetrical diblock copolymers in solution are examined. The frequencies of the eigenmodes Γ and Γ′, those of the cooperative mode Γ_T and the interdiffuse mode Γ_I are calculated for these systems. It is found that the variations of T_T and T_I, with the scattering wave number q are practically identical to those of Γ_T and Γ_I, respectively. This identity is rigorous only for mixtures or copolymers where the two polymer components are identical except for their contrast factors (i.e., indices of refraction or scattering lengths). Here, it is argued that the identification of the eigenmodes with the cooperative and interdiffuse modes can be extended qualitatively to mixtures of different polymers and to nonsymmetrical copolymers in solution.     

聚砜-聚羟基醚嵌段共聚体的合成与表征

在碱性条件下由羟端基聚砜与双酚A环氧氯丙烷相互作用下制取了聚砜-聚羟基醚嵌段共聚物。溶解度试验、红外光谱、动态和静态力学试验等证明产物确是嵌段共聚物。     

The influence of segmented block copolymers in immiscible polymer blends

One mechanism for compatibilization of immiscible polymer blends is adding block copolymers (BCP) that consist of segments chemically comparable to the parent homopolymers in the blend. BCP do both, emulsify the disperse phase to give smaller particles as well as increase the interfacial adhesion between the phases. The influence of segmented BCP in blends of immiscible high‐performance polymers was investigated systematically by variation of the flexibility of the BCP segments. It was shown that the stiffness of the second segment in polysulfone (PSU) block copolymers as well as the PSU segment molecular weight determine the intermixing between the BCP and the PSU matrix.     

Bilayers and interdigitation in block copolymer vesicles

Amphiphilic block copolyethers assemble into membranes with thickness between 2.4 and 7.5 nm. The vesicular morphology has been confirmed by small-angle X-ray scattering combined with electron microscopy for diblock copolymers and triblock copolymers of both architectures. The scaling of the membrane thicknesses with the length of the hydrophobic block is in good agreement with the strong segregation theory for block copolymer melts, indicating a mixed and stretched conformation of the hydrophobic chain inside the vesicle membrane. This result is in contrast to previously published results where the hydrophobic membranes were observed to have bilayer geometry and polymer chains that are relatively unperturbed from their ideal Gaussian dimensions.     

Morphology control in polymeric multiphase systems with block copolymers and structured latexes

Some application possibilities of block copolymers for the morphology control in polymeric multiphase systems are reviewed. The microdomain formation of block copolymers in the solid state is illustrated in the case of functionalized block copolymers and for interpolymer complexes. The preparation of “hairy latex” by emulsion polymerization in the presence of hydrophilic-hydrophobic block copolymers is shown in connection with their applications in the controlled agglomeration process of latexes and for the preparation of polymer particles having microvoids. The surface activity of block copolymers in polymeric oil-in-oil systems is illustrated for silicone oil filled polymers. These materials have a low kinetic friction coefficient and act as reservoir systems with the lubricant incorporated in the polymer matrix.     

A modular approach toward block copolymers

A novel methodology for the formation of block copolymers has been developed that combines ring-opening metathesis polymerization (ROMP) with functional chain-transfer agents (CTAs) and self-assembly. Telechelic homopolymers of cyclooctene derivatives end-functionalized with hydrogen-bonding or metal-coordination sites are formed through the combination of ROMP with a corresponding functional CTA. These telechelic homopolymers are fashioned with a high control over molecular weight and without the need for post-polymerization procedures. The homopolymers undergo fast and efficient self-assembly with their complement homopolymer or small molecule analogue to form block-copolymer architectures. The block copolymers show equivalent association constants as their small molecule analogues described in the literature, regardless of size or nature of the complementary unit or the polymer side chain.     

Characterization of propylene-ethylene block copolymers using solid state 13C-NMR spectroscopy

Commercial block copolymers of propylene with ethylene (PEBC) are multiphase systems comprising block and random copolymers as well as small amounts of homopolymers. At present, no satisfactory method exists for characterizing the “blocky” structure of these copolymers. This article aims to fulfill this need. Accordingly, the block and random copolymers of propylene with ethylene have been investigated using ¹³C CP/MAS NMR with high-power dipolar decoupling. Comparisons have been made between the spectra of block and random copolymers and it is shown possible to distinguish between them by means of an additional signal, appearing at 32.5δ, in block copolymers (attributable to block junctions). © 1992 John Wiley & Sons, Inc.     

Ambipolar charge transport in a donor–acceptor–donor‐type conjugated block copolymer and its gate‐voltage‐controlled thin film transistor memory

We demonstrate a fully conjugated donor–acceptor–donor (D–A–D) triblock copolymer, PBDTT–PNDIBT–PBDTT, which contains PBDTT as the donor block and PNDIBT as the acceptor block. The polymer was synthesized by end‐capping each block with a reactive unit, followed by condensation copolymerization between the two blocks. The physical, optical, and electrochemical properties of the polymer were investigated by comparing those of donor‐ and acceptor‐homopolymers (i.e., PBDTT and PNDIBT), which are the oligomeric monomers, and their blends. On using the newly synthesized block copolymer, ambipolar charge transport behavior was observed in the corresponding thin‐film transistor, and the behavior was compared to that of blend film of donor‐ and acceptor‐homopolymers. Owing to the presence of donor and acceptor blocks in a single polymer chain, it was found that the triblock copolymer can store two‐level information; the ability to store this information is one of the most intriguing challenges in memory applications. In this study, we confirmed the potential of the triblock copolymer in achieving distinct two‐stage data storage by utilizing the ambipolar charge trapping phenomenon, which is expected in donor and acceptor containing random and block copolymers in a thin‐film transistor. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3223–3235     

Frictional properties of dilute block-copolymer solutions and homopolymer solutions. Application to molecular weight determination.

An equation for the translational diffusion coefficient of block copolymers in dilute solution has been obtained by modifying Zimm's equation for homopolymers to take into account the existence of dissimilar segments in block copolymers. Illustrative calculations for homopolymers and block copolymers have been made and the results for homopolymers have been compared with experiments and with the calculations of Yamakawa and Fujii. A procedure has been proposed to determine the molecular weight of a block copolymer from measurements of its limiting viscosity number and its sedimentation coefficient or translational diffusion coefficient.