Chain-extended polyurethane anionomers using ionic diols of varying methylene spacers

Ionic diols with varying methylene spacers were prepared from maleic anhydride and linear diols. Reaction across the unsaturated site by aqueous sodium bisulphite was used to prepare the ionic diols. Chain extended polyurethane ionomers were prepared by the reaction of prepolymer based on different polyols and diisocyanates with the ionic diols. The polyurethane anionomers were characterized by FT-IR and FT-NMR spectroscopy. The differential scanning calorimetric results show that T_g of the anionomers shifted towards low values as the ionic content in the polyurethane increases and as the length of the ionic diol increases. © 1996 John Wiley & Sons, Inc.     

Polyurethane anionomers synthesised with aromatic, aliphatic or cycloaliphatic diisocyanates, polyoxyethylene glycol and 2,2-bis-(hydroxymethyl)propionic acid. Part 3. Electrical properties of polyurethane coatings

The following electrical properties were found for polymer coatings obtained from polyurethane anionomers synthesised with the use of various diisocyanates: volume resistivity, permittivity and dielectric dissipation factor. The effects were discussed from the molecular structures and phase structures of those anionomers on the value of their ionic conductivity and polarizability. The anionomer prepared from the aliphatic diisocyanate was found to offer ionic conductivity; hence, that material can be considered to be a solid electrolyte, which exhibits a considerable susceptibility to structural modifications in the alternating electric field.     

Development of biobased polyurethane‐imides from maleinized cottonseed oil and castor oil

An eco‐friendly coating system, which is largely biobased, has been developed from castor and cottonseed oil. Cottonseed oil was functionalized with maleic anhydride by “ene” reaction to give maleinized cottonseed oil (MACSO); the anhydride groups were reacted with isocyanates to yield –NCO terminated polyurethane prepolymer. The prepolymer was further chain extended with hydroxyl groups of castor oil to give polyurethane‐imides (PUIs). The cross‐linked films thus obtained had good mechanical properties, and the imide groups in the backbone improved the corrosion resistance of PUIs as revealed by potentiodynamic polarization study. With increasing content of MACSO, thermal stability, glass transition temperatures (T_g), tensile strength, and corrosion resistance of resulting PUIs significantly increased.     

Polyurethane anionomers synthesised with aromatic, aliphatic or cycloaliphatic diisocyanates, polyoxyethylene glycol and 2,2-bis-(hydroxymethyl)propionic acid. Part II. Supermolecular structure. Thermal properties

Small angle X-ray scattering and differential scanning calorimetry methods were employed to characterise the internal order of structural phases present in polyurethane coatings obtained as a result of water evaporation from anionomer dispersions. Those anionomers were produced in the reaction of aromatic, cycloaliphatic and aliphatic diisocyanates with polyoxyethylene glycol, 2,2-bis-(hydroxymethyl)propionic acid and 1,6-hexamethylenediamine. The decisive effects were found from ionic and polar structures within the rigid urethane and urea segments on the ordered arrangement degree of the supermolecular structures in the obtained anionomers. That becomes apparent in differential scanning calorimetry thermograms and contributes to improved thermal stability of the produced polyurethane coatings.     

Synthesis and characterization of polyurethane anionomers with bisazoaromatic chromophores and carboxylate groups

A new diol with a bisazoaromatic pendant was prepared to obtain photosensible polymers suitable for dyed aqueous systems. A polyurethane bearing bisazoaromatic chromophores, based on a poly(tetramethylene oxide) diol (average molecular weight = 2000), 2,4‐tolylene diisocyanate, and the aforementioned azo diol, was synthesized and characterized. Bichromophoric polyurethane anionomers, prepared by a two‐step substitution of urethane hydrogen atoms with sodium carboxylate groups, were studied. The influence of the concentration of carboxylate groups (30–158 mequiv of ionic groups/100 g of polymer) on some polymer properties and photoisomerism in polymer solutions and thin films was examined. In particular, the polymer structure and its morphology dictated the proximity of anchored bisazo chromophores and the capability of intermolecular forces between dyes producing hydrogen aggregates in solutions and thin films. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5463–5470, 2004     

Ultraviolet-curable epoxy acrylate dispersions: effect of urethane acrylate anionomers on stabilizing and film properties

 Epoxy acrylate dispersions stabilized using urethane acrylate anionomers were prepared for an application of ultraviolet (UV) curing. By observing the optical microscopy and colloidal stability for the epoxy acrylate dispersions, it was confirmed that the urethane acrylate anionomers incorporated have an interfacial activity in the interface between the epoxy acrylate oil and the water/ ethanol mixture (80/20, w/w). This was possible by the structurally designed urethane acrylate anionomers, containing a hydrophobic soft segment and two hydrophilic ionic sites in their molecules. In addition, when ultraviolet (UV)-cured, the urethane acrylate anionomers agglomerated to form the rubber domains in the epoxy acrylate film, which were induced by the ionic interaction. Consequently, this agglomerated rubber domains improved the final film properties. Received: 4 April 1998 Accepted: 1 July 1998     

Polyurethane anionomers synthesised with aromatic, aliphatic or cycloaliphatic diisocyanates, polyoxyethylene glycol and 2,2-bis(hydroxymethyl)propionic acid

Taking advantage of the step-growth polyaddition method, which has been developed earlier, and applying it in the reaction of aromatic, cycloaliphatic and aliphatic diisocyanates with polyoxyethylene glycol, 2,2-bis(hydroxymethyl)propionic acid and 1,6-hexamethylene-diamine, a few polyurethane anionomers were synthesised, which were recovered from aqueous dispersions in the form of thin polymeric films. Analytical chemistry methods, like gel permeation chromatography with N,N-dimethylacetamide as the polar eluent and high-resolution nuclear magnetic resonance and IR spectroscopy, were employed to confirm their chemical structures, to find molecular weights and their distribution and to characterise the polarity of the chemical structure of the polyurethane chain formed.     

Novel method for the preparation of poly(urethane–imide)s and their properties

A polymer blend consisting of polyimide (PI) and polyurethane (PU) was prepared by means of a novel approach. PU prepolymer was prepared by the reaction of polyester polyol and 2,4-tolylenediisocyanate (2,4-TDI) and then end-capped with phenol. Poly(amide acid) was prepared from pyromellitic dianhydride (PMDA) and oxydianiline (ODA). A series of oligo(amide acid)s were also prepared by controlling the molar ratio of PMDA and ODA. The PU prepolymer and poly(amide acid) or oligo(amide acid) solution were blended at room temperature in various weight ratios. The cast films were obtained from the blend solution and treated at various temperatures. With the increase of polyurethane component, the films changed from plastic to brittle and then to elastic. The poly(urethane–imide) elastomers showed excellent mechanical properties and moderate thermal stability. The elongation of films with elasticity was more than 300%. The elongation set after the breaking of films was small. From the dynamic mechanical analysis, all the samples showed a glass transition temperature (T_g) at ca. −15°C, corresponding to T_g of the urethane component, suggesting that phase separation occurred between the two polymer components, irrespective of polyimide content. TGA and DSC studies indicated that the thermal degradation of poly(urethane–imide) was in the temperature range 250–270°C. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3745–3753, 1997     

Preparation of high‐temperature polyurethane by alloying with reactive polyamide

A series of novel poly(urethane amide) films were prepared by the reaction of a polyurethane (PU) prepolymer and a soluble polyamide (PA) containing aliphatic hydroxyl groups in the backbone. The PU prepolymer was prepared by the reaction of polyester polyol and 2,4‐tolylenediisocyanate and then was end‐capped with phenol. Soluble PA was prepared by the reaction of 1‐(m‐aminophenyl)‐2‐(p‐aminophenyl)ethanol and terephthaloyl chloride. The PU prepolymer and PA were blended, and the clear, transparent solutions were cast on glass substrates; this was followed by thermal treatments at various temperatures to produce reactions between the isocyanate group of the PU prepolymer and the hydroxyl group of PA. The opaque poly(urethane amide) films showed various properties, from those of plastics to those of elastomers, depending on the ratio of the PU and PA components. Dynamic mechanical analysis showed two glass‐transition temperatures (T_g's), a lower T_g due to the PU component and a higher T_g due to the PA component, suggesting that the two polymer components were phase‐separated. The rubbery plateau region of the storage modulus for the elastic films was maintained up to about 250 °C, which is considerably higher than for conventional PUs. Tensile measurements of the elastic films of 90/10 PU/PA showed that the elongation was as high as 347%. This indicated that the alloying of PU with PA containing aliphatic hydroxyl groups in the backbone improved the high‐temperature properties of PU and, therefore, enhanced the use temperature of PU. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3497–3503, 2002     

Thermal properties of polyurethanes synthesized using waste polyurethane foam glycolysates

In this work thermal transitions and thermal stability of polyurethane intermediates and polyurethanes were investigated. The intermediates were obtained by glycolysis of waste polyurethane (PUR) in the reaction with hexamethylene glycol (HDO). The excess of HDO was not separated from the product after the glycolysis process was finished. The effects of different mass ratio of HDO to PUR foam on selected physicochemical properties (hydroxyl number, Brookfield viscosity and density) were also determined. The polyurethanes were synthesized from the obtained intermediates by the prepolymer method using diisocyanate (MDI) and glycolysis product of molecular mass in range 700/1000 g mol^–1. Hexamethylene glycol, 1,4-butanediol and ethylene glycol were used as chain extender agents. Influence of NCO groups concentration in prepolymer on glass transition temperature (T _g) and storage and loss modulus (E’, E’’) of polyurethanes were investigated by the DMTA method. Thermal decomposition of obtained glycolysates and polyurethanes was followed by thermogravimetry coupled with Fourier transform infrared spectroscopy. Main products of thermal decomposition were identified.     

Novel block ionomers. I. Synthesis and characterization of polyisobutylene‐based block anionomers

A series of novel block anionomers consisting of polyisobutylene (PIB) and poly(methacrylic acid) (PMAA) segments were prepared and characterized. The specific targets were various molecular weight diblocks (PIB‐b‐PMAA^?), triblocks (PMAA^?‐b‐PIB‐b‐PMAA^?), and three‐arm star blocks [Φ(PIB‐b‐PMAA^?)₃] consisting of rubbery PIB blocks with a number‐average degree of polymerization of 50–1000 (number‐average molecular weight = 3000–54,000 g/mol) connected to blocks of PMAA^? anions with a number‐average degree of polymerization of 5–20. The overall strategy for the synthesis of these constructs consisted of four steps: (1) synthesis by living cationic polymerization of t‐chloro‐monotelechelic, t‐chloro‐ditelechelic, and t‐chloro‐tritelechelic PIBs; (2) site transformation to obtain PIBs fitted with termini capable of mediating the atom transfer radical polymerization (ATRP) of tert‐butyl methacrylate (tBMA); (3) ATRP of tBMA, and (4) hydrolysis of poly(tert‐butyl methacrylate) to PMAA^?. The architectures created and the synthesis steps employed are summarized. Kinetic and model experiments greatly assisted in the development of convenient synthesis methods. The microarchitectures of the various block anionomers were confirmed by spectroscopy and other techniques. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3662–3678, 2002     

Shape memory fiber spun with segmented polyurethane ionomer

The effect of cationic groups within hard segments on shape memory polyurethane (SMPU) fibers was studied and the cyclic tensile testing was conducted to assess the shape memory effect. Mechanical properties, hard segment crystallization, and dynamic mechanical properties of SMPU ionomer fibers composed of 1,4‐butanediol (BDO), N‐methyldiethanolamine (NMDA), 4,4′‐methylenebis(phenyl isocyanate) (MDI), and poly(butylene adipate)diol (PBA) were investigated using a universal tensile tester, differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA). The results demonstrate that only 2 wt% NMDA can significantly change the glass transition temperature of the soft segment phase. DSC shows that the ionic group within hard segments can facilitate the crystallization of hard segments in unsteamed SMPU ionomer fibers. But for steamed fiber specimens, this effect is insignificant. Moreover, the ionic groups in hard segments with different hard segment contents (HSC) have different effects. In unsteamed fibers with 64 wt% HSC, 2 wt% NMDA increases the glass transition of soft segments from 63.5 to 70.6°C. However, in fibers with 55 wt% HSC, the glass transition temperature is lowered from 46.7 to 33.5°C. The post‐treatment, high‐pressure steaming is an effective way to remove the internal stress and subsequently improve the dimensional stability of SMPU ionomer fibers. Copyright © 2008 John Wiley & Sons, Ltd.     

Two-component interpenetrating polymer networks (IPNs) from polyurethanes and epoxies. I. Studies on full IPN,pseudo-IPN,and graft polymer alloys of polyurethanes and epoxies

In this article we review the synthesis and morphology and the physical and mechanical properties of two-component interpenetrating polymer networks (IPNs) from polyurethane and epoxy polymers; the corresponding pseudo-IPNs and grafted IPNs are also discussed. A comparison was made of full IPNs, pseudo-IPNs, grafted IPNs, and related homopolymers by examining their mechanical properties, mechanical spectra, and electron microscopy on an investigation of the effects of interpenetration or permanent entanglement in the IPN and related systems. This interpenetration has resulted in improved compatibility between the two polymer systems and has caused a decrease in the degree of phase separation. An observed shift in the dynamic glass transition temperatures (T_gs) of the two components which yielded a single IPN T_g further substantiates our results.     

Thermal,mechanical, and morphological properties of soybean oil-based polyurethane/epoxy resin interpenetrating polymer networks (IPNs)

A series of interpenetrating polymer networks (IPNs) based on epoxy (EP) resin and polyurethane (PU) prepolymer derived from soybean oil-based polyols with different mass ratios were synthesized. The structure, thermal properties, damping properties, tensile properties, and morphology of soybean oil-based PU/EP IPNs were characterized by Fourier-transform infrared spectroscopy, differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), universal test machine, and scanning electron microscopy (SEM). DSC and DMA results show that the glass transition temperature of the soybean oil-based PU/EP IPN decreases with the increase of PU prepolymer contents. Soybean oil-based PU/EP IPNs have better damping properties than that of the pure epoxy resin. The tensile strength and modulus of PU/EP IPNs decrease, while elongation at break increases with the increase of PU prepolymer contents. SEM observations reveal that phase separation appears in PU/EP IPNs with higher PU prepolymer contents.     

磺酸型阴离子聚氨酯离聚物的研究(Ⅰ)——不同离子化程度对性能的影响

合成了不同离子化程度的磺酸型阴离子聚氨酯离聚物,并通过红外光谱、示差扫描量热、动态力学、应力-应变等方法研究了它们的性能,结果表明:离子化程度不同对聚氨酯离聚物的软硬段相容性有较大的影响,引入少量离子,使软硬段相容性提高,引入大量离子时,则又使软硬段相分离程度提高,随着离子化程度的提高,材料的抗张强度、水溶性逐步提高,为控制聚氨酯材料的亲水性及制备水溶性聚氨酯提供了一种新途径。     

Polyurethane Ionomers from Cycloaliphatic Diisocyanate and Polytetramethylene Glycol

Abstract

Segmented polyurethane (PU) ionomers were prepared from cycloaliphatic diisocyanate [methylene bis(4-cyclohexyl isocyanate) (H₁₂MDI) and isophoron diisocyanate (IPDI)] and polytetramethylene glycol (PTMG) by using an anionic-type chain extender, viz., dimethylol propionic acid (DMPA). The effect of ionic content and butanediol (BD) on the state of dispersion and physical properties of emulsion-cast film was determined using Autosizer, transmission electron microscopy (TEM), Instron, and Rheovibron. With increased incorporations of DMPA in PU, particle size of emulsion decreased asymptotically, tensile modulus and strength increased, and the glass transition temperature (T _g) moved toward the higher temperature. On the other hand, with increased incorporation of BD in PU, particle size of emulsion, tensile modulus, and strength of the emulsion cast film increased, and the major transition of soft segment moved toward higher temperature. With regard to the structural effect of the isocyanate, H₁₂MDI gave finer dispersion and better mechanical properties over IPDI.     

Preparation and properties of polyaniline codoped with ionic liquid and dodecyl benzene sulfonic acid or hydrochloric acid

Three nanosized polyaniline (PAn) powders doped with ionic liquid and dodecyl benzene sulfonic acid (DBSA) or hydrochloric acid have been prepared for the first time in an ionic liquid-water emulsion system. The oil-phase ionic liquid is used as both a monomer solvent and doped counterion. The effects of different counterions on the properties (molecular weight, electrical conductivity, glass transition temperature, electrochemical activity) of PAn are investigated. PAn codoped with 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid and DBSA shows the highest molecular weight (81 104 g mol^?1), the highest electrical conductivity (1.85 S cm^?1), the lowest glass transition temperature (181°C) and the highest redox reaction current density; PAn doped with an ionic liquid only exhibits the lowest conductivity (0.0018 S cm^?1) and a lower redox reaction current density. PAn codoped with ionic liquid and HCl shows higher conductivity. They also exhibit good electrochemical stability and charge-discharge performance. These indicate that codoping of different counterions under acidic conditions could improve the degree of oxidation and doping ratio of PAn and could result in high electrical conductivity and good electrochemical properties.     

Correlating backbone‐to‐backbone distance to ionic conductivity in amorphous polymerized ionic liquids

The morphology and ionic conductivity of poly(1‐n‐alkyl‐3‐vinylimidazolium)‐based homopolymers polymerized from ionic liquids were investigated as a function of the alkyl chain length and counterion type. In general, X‐ray scattering showed three features: (i) backbone‐to‐backbone, (ii) anion‐to‐anion, and (iii) pendant‐to‐pendant characteristic distances. As the alkyl chain length increases, the backbone‐to‐backbone separation increases. As the size of counterion increases, the anion‐to‐anion scattering peak becomes apparent and its correlation length increases. The X‐ray scattering features shift to lower angles as the temperature increases due to thermal expansion. The ionic conductivity results show that the glass transition temperature (T_g) is a dominant, but not exclusive, parameter in determining ion transport. The T_g‐independent ionic conductivity decreases as the backbone‐to‐backbone spacing increases. Further interpretation of the ionic conductivity using the Vogel–Fulcher–Tammann equation enabled the correlation between polymer morphology and ionic conductivity, which highlights the importance of anion hoping between adjacent polymer backbones. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Morphology and performance of unsaturated polyester nanocomposites modified with organoclay and thermoplastic polyurethane

<正>Unsaturated polyester(UPR)/thermoplastic polyurethane(TPU)/organoclay nanocomposites were prepared by melt compounding of thermoplastic polyurethane and unsaturated polyester prepolymer,and then mixing with the hybrids of styrene monomers and organoclay at ambient temperature.The crosslinking reaction eventually occurred through the unsaturated polyester prepolymer and styrene monomer.The morphology of the composites was investigated by scanning electron microscopy(SEM) and transmission electron microscopy(TEM).The results show that the impact strength of UPR/TPU/organoclay nanocomposites increases obviously;the cure shrinkage decreases markedly,the glass transition temperature is enhanced and an elastic response to the deformation is prominent at the temperature above 10℃.     

Effect of process variables on mechanical properties of polyurethane/clay nanocomposites

This paper addresses the effects of operating variables on mechanical properties of polyurethane/clay nanocomposites including tensile strength, abrasion resistance, and hardness. The variables were prepolymer type, clay cation, clay content, and prepolymer–clay mixing time. The experiments were carried out based on the design of experiments using Taguchi methods. The nanocomposites were synthesized via in situ polymerization starting from two different types of prepolymers (polyether‐ and polyester‐types of polyol reacted with toluene diisocyanate), and methylene‐bis‐ortho‐chloroanilline (MOCA) as a chain extender/hardener. Montmorillonite with three types of cation (Na⁺, alkyl ammonium ion, and MOCA) were examined. Among the parameters studied, prepolymer type and clay cation have the most significant effects on mechanical properties. Polyester nanocomposites showed larger improvements in mechanical properties compared to polyether materials due to higher shear forces exerted by polymer matrix on clay aggregates during polymer–clay mixing. The original MMT with Na⁺ cation results in weak improvements in mechanical properties compared to organoclays. It is observed that the stress and elongation at break, and abrasion resistance of the nanocomposite samples can be optimized with 1.5% of clay loading. The morphology and chemical structure of the optimum sample were examined by X‐ray diffraction and FT‐IR spectroscopy, respectively. Copyright © 2009 John Wiley & Sons, Ltd.