Thermal decomposition behavior of mono-aminimides and their application to polymerization of epoxide

Mono-aminimide compounds [N,N-dimethyl-N-(2-hydroxypropyl)-amine-N′-propionimide ( 1 ), trimethylamine valerimide ( 2 ), and trimethylamine benzimide ( 3 )] were found to exhibit different thermal decomposition behaviors and polymerization efficiencies for an epoxide (phenyl glycidyl ether, PGE). The thermal decomposition rate of aminimides at 150°C decreased in the order 1 > 2 > 3 . It seemed that hydrogen bonding enchanced the decomposition rate, and the resonance effect induced by the phenyl group suppressed the decomposition. 1 was thermolyzed to give isocyanate and tertiary aminoalcohol, which subsequently reacted with each other to give isocyanate and tertiary aminoalcohol, which subsequently reacted with each other to give urethane. When 2 was heatted, the isocyanurate generated from 2 remained intact. On heating of 3 , we observed the formation of triphenyl isocyanurate. PGE reacted with those aminimides and gave different products depending on their thermolyzed products. Equimolar mixtures of isocyanate, tertiary amine, PGE were used in the model reactions, and the thermal reaction between the expected decompostion products of aminimides was investigated in the presence and absence of PGE. The rate of PGE consumption was in the order PGE + 2 > PGE + 1 > PGE + 3 . It is clear that the formation of urethanes and oxazolidone derivatives affects the polymerization process.     

Application of selective 1 : 2 addition of ketene N,N-acetal and isocyanates to novel polyamide syntheses

1,1-Bis(dimethylamino)ethylene (ketene N,N-acetal) (1) reacted with isocyanates to give either 1 : 1 adduct 3,3-bis(dimethylamino)acrylamides (3) or 1 : 2 adduct bis(dimethylamino)methylenemalonamides (4), depending on the amount of the charged isocyanate. 3 was obtained selectively in the case of isocyanate/1 = 1, while 4 was exclusively yielded in the case of isocyanate/1 = 2. Isothiocyanate showed similar reaction behavior as isocyanate. Polyaddition of 1 with diisocyanates afforded polyamides bearing a bis(dimethylamino)methylenemalonamide group with higher molecular weight. The obtained novel polyamides are soluble in various organic solvents, and reacted with diacid chloride to give crosslinked polymer quantitatively. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3079–3086, 1999     

Preparation of polyhydrouracils and polyiminoimidazolidinones

Polyhydrouracils and polyiminoimidazolidinones were prepared by ring formation along the chain of appropriately substituted polyureas. Cyclization of 2-carbomethoxy-ethyl-substituted polyureas in a polyphosphoric acid medium gave the polyhydrouracils. The polyurea precursors were prepared from N,N′-bis(2-carbomethoxyethyl)-1,6-hexanediamine and N,N′-di(2-carbomethoxyethyl)-1,4-cyclohexanebis(methylamine) with methylenebis(4-phenyl isocyanate), 2,4-toluene diisocyanate, and 3,3′-dimethoxy-4,4′-biphenylene diisocyanate. These polyureas were soluble in m-cresol, dimethylformamide, and chloroform, had inherent viscosities of up to 0.8, and could be cast into tough films. The polyhydrouracils had similar physical properties and could also be cast into films. The polyhydrouracils melted at temperatures 100–150°C higher than their polyurea precursors. Polyiminoimidazolidinones were prepared by cyclization of α-cyanoalkyl-substituted polyureas in the presence of n-butylamine. The intermediate polyureas, which were not isolated, were prepared from methylenebis(4-phenyl isocyanate) with N,N′-bis(1-cyanocyclohexyl)-1,6-hexanediamine, N,N′-bis(1-cyanocyclohexyl)-m-xylylenediamine and N,N′-bis(1-cyanocyclopentyl)-1,6-hexanediamine. The polyiminoimidazolidinones were soluble in m-cresol, dimethylformamide, and chloroform and had low inherent viscosities of 0.14–0.28. Thermogravimetric analyses showed that the polyhydrouracils underwent rapid decomposition at 400°C, whereas an analogous unsubstituted polyurea decomposed at 300°C. On the other hand, the polyiminoimid-azolidinones showed no greater thermal stability than the unsubstituted polyurea.     

Chemistry of sulfonyl isocyanates and sulfonyl isothiocyanates. X. Possible routes to substituted imidazolidinethiones and hexahydropyrimidinethiones

4-Toluenesulfonyl isocyanate (I) reacted with 2-aminoethanol and 3-amino-l-propanol to give 2:1 isocyanate/amino alcohol addition products. 1-Amino-2-propanol and I gave 1:1 and 2:1 adducts while 2-amino-2-methyl-l-propanol afforded only a 1:1 adduct. 4-Toluenesulfonyl isothio-cyanate (III) gave 1:1 adducts with 2-aminoethanol, l-amino-2-propanol and 3-amino-l-propanol, the first two of which were cyclized by concentrated sulfuric acid to 1-(4-toluenesulfonyl)-imidazoline-2-thiones and the third to 1-(4-toluenesulfonyl)hexahydropyrimidine-2-thione. A 1:2 adduct was obtained from III and 2-amino-2-methyl-l-propanol. Amino acids reacted with I and with 4-chlorobenzenesulfonyl isocyanate (II) to give N-(arylsulfonyl)-N¹-(carboxylic acid)-ureas. N-(4-Toluenesulfonyl)-N¹-(acetic acid)-urea (XVI) was converted to the methyl ester (XIX) by concentrated sulfuric acid and methanol and to water-soluble unrecoverable products by sulfuric acid alone. Glycine and III gave N-(4-toluenesulfonyl)-N¹-(acetic acid)-thiourea (XX) which was converted to the methyl ester (XXII) by concentrated sulfuric acid/methanol and to the cyclic 1-(4-toluenesulfonyl)imidazolin-5-one-2-thione (XXI) by sulfuric acid alone.     

The effect of ammonium polyphosphate on the mechanism of thermal degradation of polyureas

The thermal decomposition of structurally related N–H and N,N′-disubstituted polyureas (Table I) and their mixtures with ammonium polyphosphate (APP) was investigated by thermogravimetry (TG) and direct pyrolysis in a mass spectrometer (MS). The N–H polyureas (IV–VI) undergo a quantitative depolymerization process with the formation of oligomers with amine and isocyanate end groups. In contrast, the thermal degradation of the N,N′-disubstituted polyureas (I–III) proceeds by a different mechanism as a function of their chemical structure. The addition of APP lowers the thermal stability of the N,N′-disubstituted polyureas, whereas that of the N–H polyureas is unaltered. However, our data show that APP does not change the nature of the pyrolytic products. The destabilizing effect of the additive can be attributed to the catalytic action of the acid species formed by its thermal decomposition.     

New syntheses and spectral properties of pteridine‐related heterocycles from 2,5‐diamino‐3,6‐dicyanopyrazine

The reaction of 2,5‐diamino‐3,6‐dicyanopyrazine ( 1 ) as a new pyrazine raw material with alkyl isocyanate in the presence of sodium hydride gave novel heptahydroirnidazo[4,5‐g]pteridine‐2,6,8‐trione ( 2 ), but with tertiary butyl isocyanate gave trihydroimidazo[4,5‐b]pyrazine‐2‐ones ( 3 ). Similar reaction of 1 with alkyl thioisocyanate followed by alkyl iodide gave tetrahydropyrimido[4,5‐g]pteridines ( 4 ). The reac tion of 1 with alkylamine gave the amine‐adduct of the cyano groups which was further reacted with arylaldehyde to give the pyrimido[4,5‐g]pteridine ( 10 ). The products prepared are all of interest as potential pesticides and fluorescent chromophores.     

Polyimides derived from bismethylolimides. II. Polyamine-imides from bismethylolimides and diamines

Compounds in the N-methylolimide group reacted smoothly with amines in the presence of water to yield the corresponding condensation products. Polycondensations of bismethylolimides, N,N′-bismethylolpyromellitic diimide, and N,N′-bismethylolbenzophenonetetracarboxylic diimide, with amines such as aromatic diamines, piperazine, and n-butylamine, were carried out in DMAc that contained 1% water to produce linear polyamine-imides. The polyamine-imides assumed various colors, from very pale yellow to deep purple, and had inherent viscosities in the 0.07–0.37-dl/g range. Most of these polymers were soluble in polar solvents such as DMAc and DMSO. The thermal stability of the polymers was examined by thermogravimetric analysis; decomposition started at 210–350°C and weight residue at 500°C was 22–85% in air.     

Catalysis in competing isocyanate reactions. I. Effect of organotin–tertiary amine catalysts on phenyl isocyanate and N-butanol reaction

An analytical method based on high performance liquid chromatography (HPLC) has been developed to investigate the competing isocyanate reactions under the influence of various catalysts. The kinetics of the model reaction between phenyl isocyanate and n-butanol was studied in acetonitrile at 50°C. Effects of various catalysts such as an organotin compound, dibutyltin dilaurate, and tertiary amines, 1,4-diazabicyclo-(2,2,2)octane,N,N′,N″-pentamethyldiprophylene triamine,N,N′N″-tris(3-dimethyl-aminopropyl)-3-hexahydrotriazine, and N,N,N′-trimethylaminoethyl-ethanolamine on the reaction rate and the formation of reaction products were investigated. The reactions were followed by determining the NCO disappearance using the standard di-n-butylamine back-titration method as well as measuring the formation of various reaction products using the HPLC method. The relative specificity of a catalyst in isocyanate reactions can thus be determined from the profile of the model reaction which depends upon the structure of the catalyst employed.     

The thermolysis of heterocyclic aminimines

Aminimines derived from six heterocyclic tertiary amines were thermolyzed in t-butyl alcohol at ca. 80°. N-Methylindoline gave a good yield of the ring-opened product, and a double elimination on 1,4,4-trimethyl-piperidine gave 3,3-dimethyl-1,4-pentadiene. The aminimine derived from quinuclidine was stable to elimination under these conditions. Simple elimination products were not obtained from N-methyl-pyrrolidine, N-methylpiperidine, or N-methyltetrahydroisoquinoline.     

Some reactions of fluorosulfonyldifluoroacetic acid with N-heterocyclic compounds

Difluorocarbene generated from the decomposition of fluorosulfonyldifluoroacetic acid (2)reacted with various sodium salts of N-heterocyclic compounds(1) giving the corresponding difluoro-methylated products in acetonitrile at 10—40℃.Benzotriazole(1a),benzimidazole(1b) and imidazole(1c) were converted into 1-(difluoromethyl)benzotriazole(3a),1-(difluoromethyl)benzimidazole(3b) and1-(difluoromethyl)imidazole(3c)respectively.Indole(1d)reacted with 2 to give -(fluorosulfonyldifluoro-acetate)indole(2d) rather than the expected difluoromethylated derivatives.     

The reaction of lithium phenylacetylide and phenyllithium with N-(ω-Bromoalkyl)phthalimides

Lithium phenylacetylide reacted with short-chain N-(ω-bromoalkyl)phthalimides 1b and 1c to give tricyclic products 2b and 2c in moderate yields. Likewise, tricyclic products 3a-c were obtained when short-chain imides 1a-c were treated with phenyllithium. When longer-chain imides 1d-f in this series were treated with lithium phenylacetylide only tertiary alcohols 4d-f could be isolated. Partial hydrogenation of 2b and 2c yielded the corresponding alkenes 5b and 5c , products which corroborated the structural assignment of 2b and 2c .     

1-(Aziridine) carbonyl chlorides and 1-(aziridine) carbonyl quaternary ammonium chlorides. Rearrangement to 2-(chloroalkyl) isocyanates

Aziridine reacted with phosgene in the presence of an acid acceptor or with 1,1′-carbonylbis(pyridinium) chloride to produce 1-(aziridine)carbonyl chloride (XII) or 1-(aziridine)carbonyl pyridinium chloride (XIII), respectively, as transient intermediates. Attempts to trap and observe (XII) and (XIII) at -10° were unsuccessful. These elusive materials underwent facile rearrangements to 2 - chloroethyl isocyanate under these conditions. Aziridine reacted with 1,1′-carbonylbis(triethylammonium)chloride (VII) at -20° to give 1-(aziridine) carbonyl triethylammonium chloride (X) as a transient intermediate which proceeded to 2-chloroethyl isocyanate. At -10° this reaction produced N,N-diethyl-1-aziridinecarboxamide. Aziridine reacted with a large excess of phosgene in the absence of an acid acceptor to give N-2-(chloroethyl) carbamoyl chloride (III), 1,1′-bis(2-chloroethyl) urea (IV) and 2-(β-chloroethylamino)-2-oxazoline hydrochloride (V). Possible mechanisms for these reactions are discussed.     

Thermal stability of structurally related polymers containing carborane and phthalocyanine groups

These studies were undertaken to determine the thermal behavior of structurally related polymers having a carborane nucleus in the recurring unit. Three of these products also contained phthalocyanine rings in their molecules. Results of thermal analysis studies show generally that the relative heat stability of the polymers conforms closely with indications given by similar investigations of structurally related intermediate and model compounds. A polymer with dimethylsiloxane units exhibited more resistance to thermal decomposition than similar products having urethane groups in their molecules. The urethane polymers derived from tolylene diisocyanate were found to be somewhat less heat-stable than analogous materials synthesized from methylenebis-(p-phenyl isocyanate). The relative order of thermal resistance of these materials follows that of more conventional polyurethane elastomers.     

Structure–property relationships of ionene polymers

The synthesis of new ionenes was accomplished by the reaction of novel diamines and dihalides. A new class of crosslinkable ionenes was made possible by the synthesis of tertiary diamines with acrylate functionality, generated ultimately from diepoxides and secondary amines. Other tertiary diamines were produced by endcapping of diols with tolylene diisocyanate, followed by reaction with N,N-dimethylethanolamine and also termination of living poly(tetrahydrofuran) polymer with dimethylamine. New dihalides were produced by the opening of diepoxides with ω-bromoacids. These diamines and dihalides underwent Menschutkin reactions providing novel ionenes for structure–property relationship studies. Correlations were drawn concerning amine nucleophilicity, dihalide nucleofugascity, and molecular weight. Stress–strain and thermal data reflected the effects of ionic domains and large flexible segments in the polymers. Also considered were the electrical conductivity, moisture–vapor transmission, and oxygen permeability of these materials.     

Synthesis and Properties of <Emphasis Type="Italic">N</Emphasis>-[R-Adamantan-1(2)-yl]-<Emphasis Type="Italic">N</Emphasis>′-(2-fluorophenyl)ureas—Target-Oriented Soluble Epoxide Hydrolase Inhibitors

2-Fluorophenyl isocyanate reacted with adamantan-1(2)-amines and their homologs in DMF to give 31–92% of the corresponding N,N′-disubstituted ureas that are target-oriented human soluble epoxide hydrolase (sEH) inhibitors. Introduction of a fluorine atom increases the sEH inhibitory activity by a factor of 4.5.     

Chemistry of sulfonyl isocyanates and sulfonyl isothiocyanates. IX. Routes to substituted oxazolidin-2-ones and oxazolidine-2-thiones

4-Chlorobenzenesulfonyl isocyanate (I) reacted with 2-chloroethanol and 1-chloro-2-propanol to give, respectively, 2-chloroethyl 4-chlorobenzenesulfonyl carbamate (III) and 1-chloro-2-propyl 4-chlorobenzenesulfonyl carbamate (VI). The carbamates III and VI cyclized under the influence of pyridine to afford, respectively, 3-(4-chlorobenzenesulfonyl)oxazolidin-2-one (IV) and 3-(4-chlorobenzenesulfonyl)-5-methyloxazolidin-2-one (VII). The oxazolidin-2-ones were stable toward hydrochloric acid but hydrolyzed in 2M sodium hydroxide solution to N-(2-hydroxyethyl)-4-chlorobenzenesulfonamide (V) and N-(2-hydroxy-1-propyl)-4-chlorobenzene-sulfonamide (VIII), respectively. 4-Toluenesulfonyl isothiocyanate (II) reacted with 2-chloroethanol to give 2-chloroethyl 4-chlorobenzenesulfonyl thiocarbamate (IX), which was converted by pyridine to 3-(4-toluenesulfonyl)oxazolidine-2-thione (X).     

N‐glycosylation approach to glucose‐functionalized diamine and its use for protection‐free synthesis of polyurea bearing glucoside pendant

A glucose‐functionalized diamine was prepared and used as a new monomer for polyurea synthesis. The diamine was prepared by N‐glycosylation of 1,6‐hexamethylenediamine with D ‐glucose. Upon adding diisocyanates to the diamine, isocyanate reacted selectively with the amino groups, not with the hydroxyl groups of the glucose‐derived structure, to give the corresponding polyureas. The polyureas exhibited highly hydrophilic nature due to the presence of the glucose‐derived side chain. A ternary system consisting of the glucose‐functionalized diamine, piperazine, and diisocyanate gave the corresponding polyureas, where content of the glucose‐derived moiety was tunable by feed ratio between the diamine and piperazine. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Kinetics and mechanism of the thermal decomposition of methyl isocyanate

The kinetics of gas-phase decomposition of methyl isocyanate have been investigated in the range of 427–548°C. Two decomposition routes are followed; the predominant one is a radical-chain process giving CO, H₂, and HCN as major products, which has an order of 1.5 and an Arrhenius equation given by log k(L^1/2/mol^1/2·s) = (13.12 ± 0.06) ? (56,450 ± 1670) cal/mol/2.303 RT. The minor route is the bimolecular formation of N,N′-dimethylcarbodiimide and CO₂, which from the low activation parameters E_a = 31.6 kcal, A = 10^5.30 L^1/2/mol^1/2·s, and the reaction order of 1.57 appears to be heterogeneous.     

Studies on sulfinato-dehalogenation: XII. Sodium dithionite-initiated addition of N,N-diethyliododifluoroacetamide to multiple bonds

N, N-deithyl-iododifluoroacetamide 1 reacted with alkenes, alkynes in aqueous acetonitrile solutions of sodium dithionite and sodium hydrogen carbonate at room temperature to give the corresponding adducts, thus constituting a new method for introducing the CF₂ group into organic molecules. Compound 1 reacted with conjugated olefins 2b, c to afford the iodine-free adducts 7b, c. The adducts 3d—f, from addition of 1 to alkenes 2d—f, could be converted into α,α-difluoro-γ-lactones 5d—f by treatment with silica gel. Compound 1 reacted with ethyl vinyl ether 2i to give aldehyde 8, and perfluoroalkyl or polyfluoroalkyl iodides reacted similarly. A radical mechanism was proposed for the addition reaction. Under the same condition, N,N-diethyl-bromodifluoroacetamide produced only the corresponding sulfinate Et₂NC(O)CF₂SO₂Na.     

Cationic polyelectrolytes. I. Soluble polymers prepared from reaction of chloromethylated polystyrene with tris(2-hydroxythyl)amine

The reaction of chloromethylated polystyrene with tris(2-hydroxyethyl)amine in N,N-dimethylformamide is described for the conditions to prepare soluble reaction products. The groups of the quaternary ammonium salt, which appear in the first stage of the reaction, transpose to the amino-ether groups. The reaction was followed by elementary analysis, IR and ¹H-NMR spectra, and viscosimetric measurements for nondialyzed and dialyzed samples. The presence of the tertiary amine groups on obtained polymers was also shown by titration. The polymers from the reaction of chloromethylated polystyrene with tris(2-hydroxyethyl)amine reacted easily with benzyl chloride.