Transparent poly(bisphenol A carbonate)-based nanocomposites with high refractive index nanoparticles

Transparent organic-inorganic nanocomposites were successfully synthesized from sulfonic acid-modified poly(bisphenol A carbonate) (SPC) and TiO₂ or ZrO₂ nanoparticles. The dispersibility of nanoparticles was significantly improved by both the surface treatment of nanoparticles with phosphoric acid 2-ethylhexyl esters (PAEH) and the introduction of a sulfonic acid moiety into the PC chain. It was found that in some cases, crystallization of the matrix caused a reduction in transparency. Efficient dispersion of nanoparticles and the absence of crystallization resulted in highly transparent nanocomposites with up to 42 wt% TiO₂ and 50 wt% ZrO₂ nanoparticles. The refractive indices of the nanocomposites based on SPC increased with the increasing amount of nanoparticles. Theoretical equation based on Maxwell-Garnett effective medium theory provided reasonably close estimation of the refractive indices to the experimentally observed values. The prepared nanocomposites had lower thermal stability than the host matrix polymers.     

Thermal behavior of poly(bisphenol A carbonate) in the presence of phosphorus compounds

To clarify the interaction between poly(bisphenol A carbonate) (PBAC) and phosphorus compounds such as triphenylphosphine oxide (TPPO), triphenyl phosphate (TPP), and resorcinol bis(diphenyl phosphate) (RDP), PBAC was heated in the presence of these phosphorus compounds at 240 °C for 2 h, and the resulting polymers were analyzed by ¹H NMR spectroscopy and gel permeation chromatography. When heated in the presence of TPPO, the PBAC sample decomposed extensively, resulting in a substantial decrease in molecular weight. On the other hand, thermal treatment in the presence of the phosphates increased the molecular weight. In both cases the molecular weight distribution became narrower. Thermal treatment of PBAC in the presence of both TPPO and TPP allowed us to control the molecular weight with a narrower distribution. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1069–1074, 2004     

Thermal diffusivity of polycaprolactone/poly(bisphenol A carbonate) blends by flash radiometry

This article presents thermal diffusivity (D) measurement by flash radiometry for the polymer blend of polycaprolactone (PCL) and poly(bisphenol A carbonate) (PC) with a lower critical solution temperature (LCST) phase diagram. The dependence of D on temperature is significantly changed by annealing above the cloud point. D is largely increased by the growth of PCL crystallite in the blends. In the miscible state, D is smaller than that predicted by the rule of mixtures, whereas the dependence of D on the weight fraction of PC for the immiscible (phase‐separated) state is well expressed by the rule of mixtures. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 745–749, 1999     

Study of poly(bisphenol A carbonate) relaxation kinetics at the glass transition temperature

In this work, the variations of the relaxation times are investigated above and below the glass transition temperature of a model amorphous polymer, the polycarbonate. Three different techniques (calorimetric, dielectric and thermostimulated currents) are used to achieve this goal. The relaxation time at the glass transition temperature was determined at the temperature dependence convergence of the relaxation times calculated with dynamic dielectric spectroscopy (DDS) for the liquid state and thermostimulated depolarisation currents (TSDC) for the vitreous state. We find a value of τ(T_g) = 110 s for PC samples. The knowledge of the temperature dependence, τ(T), and the value τ(T_g) enables to determine the glass-forming liquid fragility index, m. We find m = 178 ± 5.     

Gas transport properties of poly(2,2,4,4-tetramethyl cyclobutane carbonate)

Gas transport properties of semicrystalline films of poly(2,2,4,4-tetramethyl cyclobutane carbonate) (TMCBPC) were studied. Permeability coefficients for He, O₂, N₂, CH₄, and CO₂ at 35°C for pressures between 1 and 20 atm are reported as well as sorption isotherms for N₂, CH₄, and CO₂ at the same conditions. The permeability coefficients for TMCBPC are larger than corresponding values for the aromatic bisphenol-A polycarbonate (PC) and tetramethyl bisphenol-A polycarbonate (TMPC), even though the TMCBPC films are semicrystalline. These results are explained on the basis of the larger free volume available for permeation in this polymer. Significant TMCBPC plasticization by CO₂ was also observed and this causes typical time-dependent behavior. The plasticization process starts at very low pressures compared with the behavior of aromatic polycarbonates PC and TMPC. This early onset of plasticization seems to be related also to the larger free volume in the amorphous phase of TMCBPC which favors high gas sorption. The diffusion coefficients for TMCBPC are also larger than those reported for the aromatic polycarbonates PC and TMPC. Ideal gas separation factors were found to follow the usual trend; that is, as permeability increases, the ideal separation factor decreases. © 1993 John Wiley & Sons, Inc.     

Effect of supercritical carbon dioxide on the diffusion coefficient of phenol in poly(bisphenol A carbonate)

For some polymers, the rate of solid‐state polymerization (SSP) is higher with supercritical carbon dioxide (scCO₂) as the sweep gas than with atmospheric N₂. One explanation for this higher rate is that the diffusion coefficient of the condensate molecule is higher in the CO₂‐swollen polymer. To investigate this hypothesis, we measured the diffusion coefficient of phenol in poly(bisphenol A carbonate) (BPA‐PC) by carrying out SSP of this polymer under diffusion‐limited conditions. Under these conditions, the diffusion coefficient of the condensate molecule could be calculated from the profile of the molecular weight versus time. The phenol diffusivity was determined between 135 and 180 °C in the presence of N₂ at about 1 bar and in the presence of scCO₂ at about 138, 207, and 345 bar. The diffusion coefficient of phenol was up to 200% higher in scCO₂ than in N₂, depending on the temperature and CO₂ pressure. With both N₂ and scCO₂, the activation energy for phenol diffusion in BPA‐PC was larger than the activation energy for the reaction between hydroxyl and phenyl end groups that occurred during SSP of BPA‐PC. As a result, the overall SSP reaction shifted from diffusion control at low temperatures toward chemical‐reaction control at high temperatures. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1143–1156, 2003     

Comprehensive two-dimensional liquid chromatography and hyphenated liquid chromatography to study the degradation of poly(bisphenol A)carbonate

Size exclusion chromatography (SEC), gradient polymer elution chromatography (GPEC) and liquid chromatography at critical conditions (LC-CC) have been developed and applied to observe chemical changes in poly(bisphenol A)carbonate (PC) due to hydrolytic degradation. Especially LC-CC appeared to be very successful to observe differences in functionality of PC as result of hydrolytic degradation. Observed differences due to degradation could be identified by (semi) on-line coupling to matrix assisted laser desorption-ionization time-of-flight mass spectrometry (MALDI-TOF-MS). The differences in functionality could be attributed to the formation of different end-groups, i.e. OH end-groups. In addition, comprehensive two-dimensional liquid chromatography (2D-LC) has been applied successfully to study the hydrolytic degradation of PC. LC-CC x SEC showed that the formation of PC with different end-groups occurred over the whole molecular mass range. This information could not be obtained with the separate liquid chromatographic techniques, thereby illustrating the added value of 2D-LC.     

Thermal,Mechanical and Rheological Properties of Eco-friendly Poly（propylene carbonate）/Poly（1,2-propylene succinate） Blends

In order to improve the flexibility of poly（propylene carbonate） （PPC）, poly（1,2-propylene succinate） （PPSu） was used to plasticize PPC in a batch mixer. The effects of PPSu on the miscibility, thermal stability, mechanical and theological properties of the blends were investigated. PPC was partially miscible with PPSu. It was demonstrated that PPSu decreased the glass transition temperature and melt viscosity of PPC, as shown in the DSC and rheological curves. With the increase in PPSu content, the PPC/PPSu blends showed decreased tensile strength, however, the elongation at break was increased to 1100% for the 70/30 PPC/PPSu blend. The introduction of PPSu provided an efficient and novel plasticization method to extend the application area of PPC.     

Chromatographic evaluation of poly (trans-1,2-cyclohexanediyl-bis acrylamide) as a chiral stationary phase for HPLC

Chiral stationary phases (CSPs) based on polymeric (R,R)- or (S,S)-1,2-diaminocyclohexane (DACH) derivatives are synthesized. When bonded to 5 microm porous spherical silica gel, the poly (trans-1,2-cyclohexanediyl-bis acrylamide) based poly-cyclic amine polymer (P-CAP) stationary phases is proved to be effective chiral stationary phases that could be used in the normal-phase mode, polar organic mode and with halogenated solvents mobile phases, if desired. Since these are entirely synthetic CSPs, the elution order of all enantiomers can be reversed between the (R,R) P-CAP and (S,S) P-CAP columns. Because of the high loading of chiral selectors, the columns exhibit very high sample capacities. Thus, P-CAP columns are useful for preparative and semi-preparative enantiomeric separations. The application of these CSPs and optimization of their separations are discussed.     

Thermal decomposition behavior of poly(propylene carbonate) in poly(propylene carbonate)/poly(vinyl alcohol) blend

Journal of Thermal Analysis and Calorimetry - To provide guidance for the practical thermal processing and applications of poly(propylene carbonate)/poly(vinyl alcohol) (PPC/PVA) blend, an...     

Depolymerization of Poly（bisphenol A carbonate） in Subcritical and Supercritical Toluene

The depolymerization of poly(bisphenol A carbonate)(PC) in subcritical and supercritical toluene was studied. The experimental parameters, which influence the depolymerization reaction such as temperature (570-633 K), pressure (4.0-7.0 MPa), reaction time (5-60 min), and toluene to PC weight ratio (3.0-11.0), were investigated, and the reaction products were determined by GC, GC/MS and FT-IR spectrometer. It was found that the main product of the depolymerization reaction was bisphenol A(BPA). BPA accounted for over 55.7% of the depolymerization products at reaction temperature 613 K, pressure 5.0-6.0 MPa, reaction time 15 min and toluene/PC weight ratio of around 7.0.     

聚碳酸丙烯酯中碳酸丙烯酯含量的测定

建立了气相色谱分析聚碳酸丙烯酯中碳酸丙烯酯含量的方法,该方法操作简单,准确度高,可满足工业检测需求.     

A new synthesis of trans-1,2-bis(trans-octaethylchlorin-20-yl)ethylene

Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 12, pp. 1693–1695, December, 1993.     

Hyphenation of infrared spectroscopy to liquid chromatography for qualitative and quantitative polymer analysis: degradation of poly(bisphenol A)carbonate

Hyphenation of infrared spectroscopy (IR) to liquid chromatography (LC) has been applied to study chemical changes in poly(bisphenol A)carbonate (PC) as a result of degradation. Especially coupling of LC to FTIR through solvent elimination is a sensitive approach to identify changes in functionality observed in the LC chromatograms as has been demonstrated by coupling of liquid chromatography under critical conditions (LCCC) to IR. Furthermore, an example is shown in which two-dimensional liquid chromatography, i.e. LCCCxSEC, was coupled to IR by means of a flow cell. This resulted in data sets containing most probably valuable data, but extracting relevant information from these large data sets is not straightforward at all. Therefore, multivariate data analysis (MVDA) of SEC-FTIR data was used to extract relevant data from large data sets. This approach revealed chemical differences due to degradation that could not be detected by other means. Spectral features could be identified that allowed to quantitatively predict the degradation of poly(bisphenol A)carbonate as a function of degradation conditions.