Synthesis,processing, and third-order nonlinear optical properties of benzobisthiazole polymers containing thiophene moieties

Benzobisthiazole polymers containing mono-, bi-, and terthiophene moieties were synthesized through polycondensation in polyphosphoric acid of 2,5-diamino-1,4-benzenedithiol dihydrochloride with thiophene-2,5-dicarboxylic acid, 2,2′-bithiophene-5,5′-dicarboxylic acid, and 2,2′:5′,2″-terthlophene-5,5″-dicarboxylic acid, or their corresponding diacid chlorides, respectively. Intrinsic viscosities of up to 8.1 dL/g (methanesulfonic acid, 30°C) were recorded. Polymer structures were verified by elemental analysis and spectroscopic comparison of the polymers with appropriate model compounds. Onset of breakdown under thermogravimetric analysis in air occurred in the 460–590°C range with the benzobisthiazole polymers containing a monothiophene linkage being the most stable. Films suitable for third-order optical susceptibility measurements could be prepared by extrusion techniques from the benzobisthiazole polymer containing a monothiophene linkage. Degenerate four wave mixing measurements on this film yielded a third order optical susceptibility χ⁽³⁾ of approximately 4.5 × 10^?10 esu. © 1993 John Wiley & Sons, Inc.     

Substituted rod-like aromatic polyamides: Synthesis and structure-property relations

The synthesis and structure-property relations of a number of novel substituted paralinked aromatic homopolyamides and copolyamides are described. The synthesis of the polyamides was carried out by polycondensation of activated N,N'-bis-(trimethylsilyl) substitued aromatic diamines and aromatic diacid chlorides. In order to improve the solubility and to lower melting temperatures, novel arylsubstituted terephthalic acids moieties, such as p-terphenyl-2,5-dicarboxylic acid and o-terphenyl-2,5-dicarboxylic acid, were used in combination with substituted and noncoplanar diamines. Depending on the chemical structure, polyamides with very high solubility (up to 40% w/w) in polar aprotic solvents such as N,N-dimethylacetamide without the addition of inorganic salts were obtained. Lyotropic liquid crystalline behavior was observed for the first time in polyamides which contain noncoplanar biphenylene units.     

Synthesis and characterization of N-phenylated aromatic polyureas from dianilino compounds and aromatic diisocyanates

N-phenylated aromatic polyureas were synthesized by the polyaddition of dianilino compounds to aromatic diisocyanates in sym-tetrachloroethane at around 100°C. Factors that influence the reaction, such as monomer concentration, reaction solvent, catalyst, temperature, and time, were studied to optimize the conditions for the preparation of high molecular weight polymers. Compared with the analogous unsubstituted aromatic polyureas, the N-phenylated polyureas were almost amorphous and soluble in a variety of solvents and had low glass transition temperatures. Some of the polymers could be cast into transparent flexible films from chloroform solutions.     

Synthesis and photochemical properties of solar energy storage-exchange polymers containing pendant norbornadiene moieties

New photoresponsive polymers 1–4 containing pendant norbornadiene (NBD) moieties with N,N-disubstituted amide groups were synthesized with 97, 98, 92, and 94% conversions by the substitution reaction of poly (p-chloromethyl) styrene] with potassium salts of 3piperidyloxo-2,5-NBD-2-carboxylic acid, 3-(NN-dipropylcarbamoyl) -2,5-NBD-2-carboxylic acid, 3-(N-methyl-N-phenylcarbamoyl)-2,5-NBD-2-carboxylic acid, and 3-(N,N-dipheylcarbmoyl)-2,5-NBD-2-carboxylic acid, respectively, using tetrabutylammonium bromide as a phase transfer catalyst for all. Polymers 1–4 with N,N-disubstituted amide groups on the NBD moieties were sensitized by adding appropriate photosensitizers such as Michler's ketone and 4- (N,N-dimethylamino) benzophenone in the film state, although the reactivities of the polymers without photosensitizer were lower than that of our previously reported polymer 5 containing pendant 3- (N-phenylcarbamoyl) -2,5-NBD-2-carboxylate moiety. It was also found that the photo-irradiated retaining polymers 1–4 containing the corresponding QC moieties can be stored about 80–86 kJ/mol of their thermal energy. © 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of N‐substituted hyperbranched polyureas

N,N′‐disubstituted hyperbranched polyureas with methyl, benzyl, and allyl substitutents were synthesized starting from AB₂ monomers based on 3,5‐diamino benzoic acid. Carbonyl azide approach, which generates isocyanate group in situ on thermal decomposition, was used for the protection of isocyanate functional groups. The N‐substituted hyperbranched polymers can be considered as the new class of internally functionalized hyperbranched polyureas wherein the substituent can function either as receptor or as a chemical entity for selective transformations as a tool to tailor the properties. The chain‐ends were also modified by attaching long chain aliphatic groups to fully realize the interior functionalization. This approach opens up a possible synthetic route wherein different functional substituents can be used to generate a library of internally functionalized hyperbranched polymers. All the hyperbranched polyureas were characterized by FTIR, ¹H‐NMR, DSC, TGA, and size exclusion chromatography. Degree of branching in these N,N′‐disubstituted hyperbranched polyureas, as calculated by ¹H‐NMR spectroscopy using model compounds, was found to be lower than the unsubstituted hyperbranched polyurea and is attributed to the lower reactivity of N‐substituted amines compared to that of unsubstituted amines. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5134–5145, 2004     

含席夫碱的噻吩两亲分子表面活性剂的合成

在氯化亚砜存在下,2,5-二甲酸噻吩与甲醇反应得到2,5-二甲酸甲酯噻吩(1),1与水合肼反应得对应的噻吩酰肼(2),2再与辛酮缩合得到含席夫碱的噻吩两亲分子表面活性剂,其结构经1H NMR,IR和元素分析确认。     

Synthesis and thermal characteristics of phosphorus-containing polyureas and copolyureas based on 1-[(dialkoxyphosphinyl)methyl]-2,4- and -2,6-diaminobenzenes

The reactions of 1-[(dialkoxyphosphinyl)methyl]-2,4- and -2,6-diaminobenzenes (1) with various diisocyanates such as tolylene diisocyanate, methylenebis(4-phenylisocyanate), and hexamethylene-1,6-diisocyanate were studied for the synthesis of phosphorus-containing polyureas. Furthermore, diamines 1 were used as comonomers for preparing fire-resistant copolyureas. In addition, the corresponding common polyureas were synthesized for comparative purposes. All polymers were characterized by elemental analysis, inherent viscosity measurements, infrared (IR) and proton nuclear magnetic resonance (¹H-NMR) spectroscopy, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The relatively low chemical reactivity of 1 toward diisocyanates was interpreted on the basis of their structural features. The phosphorus-containing polyureas showed a lower molecular weight, a lower polymer decomposition temperature, and a higher char yield than the corresponding common polyureas. Their fire-resistance was evaluated by determining the limiting oxygen index value.     

METAL-ORGANIC COORDINATION POLYMERS OF LANTHANIDES(III) WITH THIENOTHIOPHENDICARBOXYLATE LIGANDS

Journal of Structural Chemistry - Three novel metal-organic coordination polymers based on sulfur-containing thieno[3,2-b]thiophene-2,5-dicarboxylic (trans-H2ttdc) and...     

The effect of ammonium polyphosphate on the mechanism of thermal degradation of polyureas

The thermal decomposition of structurally related N–H and N,N′-disubstituted polyureas (Table I) and their mixtures with ammonium polyphosphate (APP) was investigated by thermogravimetry (TG) and direct pyrolysis in a mass spectrometer (MS). The N–H polyureas (IV–VI) undergo a quantitative depolymerization process with the formation of oligomers with amine and isocyanate end groups. In contrast, the thermal degradation of the N,N′-disubstituted polyureas (I–III) proceeds by a different mechanism as a function of their chemical structure. The addition of APP lowers the thermal stability of the N,N′-disubstituted polyureas, whereas that of the N–H polyureas is unaltered. However, our data show that APP does not change the nature of the pyrolytic products. The destabilizing effect of the additive can be attributed to the catalytic action of the acid species formed by its thermal decomposition.     

Synthesis and characterization of poly(benzobisthiazole) with tetramethylbiphenyl moiety in the main chain

Poly(benzobisthiazole)s containing an ortho-tetramethyl substituted biphenyl moiety were synthesized via the polycondensation of 2,5-diamino-1,4-benzenedithiol dihydrochloride with 2,2′,6,6′-tetramethylbiphenyl-4,4′-dicarboxylic acid in poly(phosphoric acid) (PPA). The intrinsic viscosities of the tetramethylbiphenyl poly-(benzobisthiazole)s in chlorosulfonic acid at 30°C were in the range of 6.9–13.4 dL/g. Copolycondensation of 2,5-diamino-1,4-benzenedithiol dihydrochloride with terephthalic acid and 2,2′,6,6′-tetramethylbiphenyl-4,4′-dicarboxylic acid was carried out as well by varying the ratio of the two dicarboxylic acid monomers in the reactant mixture. The homopolymers and copolymers were characterized by Fourier transform infrared spectroscopy (FTIR) and ¹³C solid-state nuclear magnetic resonance spectroscopy (NMR). Thermal stability of the polymers was evaluated by thermogravimetric analysis (TGA) and thermogravimetric mass spectrum analysis (TG-MS). The tetramethylbiphenyl poly(benzobisthiazole)s were found to be more stable at elevated temperatures than the parent poly(p-phenylene benzobisthiazole) (PBZT). © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1407–1416, 1998     

Grafting of Polymers onto Activated Carbon Surface: Graft Polymerization of Vinyl Monomers Initiated by Azo Groups That Were Introduced onto the Surface

Abstract

We examined the grafting of polymers onto an activated carbon powder surface by polymerization that was initiated by azo groups that were introduced onto the surface as well as the effects of grafted polymers on the adsorption of acetic acid. The introduction of azo groups onto the surface was achieved by the following methods: (1) a reaction of 4,4′-azobis(4-cyano-pentanoic acid) (ACPA) with surface isocyanate groups that were introduced beforehand by treatment with tolylene 2,4-diisocyanate (AC-Azo 1) and (2) the direct condensation of ACPA with surface phenolic hydroxyl groups by using N,N'-dicyclohexylcarbodiimide (AC-Azo 2). The radical polymerizations of styrene, methyl methacrylate, N,N-diethylacrylamide (DEAM), and N-isopropylacrylamide (NIPAM), were successfully initiated by the azo groups on the surface and the corresponding polymers were grafted onto the surface. There was a significant decrease in the adsorption of the acetic acid of the activated carbons when polymers were grafted onto them, particularly in regards to the grafting of hydrophobic polymers. On the other hand, a decrease in the adsorbability of the polyDEAM-grafted and polyNIPAM-grafted activated carbon was barely observed. In addition, polyDEAM-grafted and polyNIPAM-grafted activated carbons showed temperature-dependent adsorption of acetic acid: the adsorbability of these activated carbon decreased above lower critical solution temperature of these polymers, which is about 32°C.     

Synthesis and properties of aromatic polyureas from N,N′-bis(trimethylsilyl)-substituted aromatic diamines and aromatic diisocyanates

Silylated aromatic polyureas were synthesized by the polyaddition of N,N′-bis(trimethylsilyl)-substituted aromatic diamines to aromatic diisocyanates in various organic solvents at a temperature ranging from 30 to 100°C. Colorless and transparent films of the silylated polyureas were obtained by casting directly from these solutions in a dry nitrogen atmosphere. The silylated polyureas thermally decomposed at around 200°C and were easily desilylated with alcohol to convert to almost amorphous aromatic polyureas having inherent viscosities of 0.4–1.0 dL/g. The polyureas exhibited better solubility in organic solvents such as N,N-dimethylacetamide, N-methyl-2-pyrrolidone, and dimethyl sulfoxide and had somewhat lower thermal decomposition temperatures (around 300°C) than the polyureas prepared by a conventional method from the parent aromatic diamines and diisocyanates.     

Preparation of polyhydrouracils and polyiminoimidazolidinones

Polyhydrouracils and polyiminoimidazolidinones were prepared by ring formation along the chain of appropriately substituted polyureas. Cyclization of 2-carbomethoxy-ethyl-substituted polyureas in a polyphosphoric acid medium gave the polyhydrouracils. The polyurea precursors were prepared from N,N′-bis(2-carbomethoxyethyl)-1,6-hexanediamine and N,N′-di(2-carbomethoxyethyl)-1,4-cyclohexanebis(methylamine) with methylenebis(4-phenyl isocyanate), 2,4-toluene diisocyanate, and 3,3′-dimethoxy-4,4′-biphenylene diisocyanate. These polyureas were soluble in m-cresol, dimethylformamide, and chloroform, had inherent viscosities of up to 0.8, and could be cast into tough films. The polyhydrouracils had similar physical properties and could also be cast into films. The polyhydrouracils melted at temperatures 100–150°C higher than their polyurea precursors. Polyiminoimidazolidinones were prepared by cyclization of α-cyanoalkyl-substituted polyureas in the presence of n-butylamine. The intermediate polyureas, which were not isolated, were prepared from methylenebis(4-phenyl isocyanate) with N,N′-bis(1-cyanocyclohexyl)-1,6-hexanediamine, N,N′-bis(1-cyanocyclohexyl)-m-xylylenediamine and N,N′-bis(1-cyanocyclopentyl)-1,6-hexanediamine. The polyiminoimidazolidinones were soluble in m-cresol, dimethylformamide, and chloroform and had low inherent viscosities of 0.14–0.28. Thermogravimetric analyses showed that the polyhydrouracils underwent rapid decomposition at 400°C, whereas an analogous unsubstituted polyurea decomposed at 300°C. On the other hand, the polyiminoimid-azolidinones showed no greater thermal stability than the unsubstituted polyurea.     

Conformational properties of structurally rigid polyamides. II. Effect of strong acids on the circular dichroism spectra of asymmetric polyamides with varying degree of structural rigidity

We have investigated the effect of methanesulfonic acid (MSA) on the circular dichroism (CD) spectra of some stereoregular polyamides derived from three cyclic 1,2-dicarboxylic acids (I–III) and piperazine (PIP), trans-2,5-dimethylpiperazine (DMPIP), or N,N′-dimethylethylenediamine (DMED). On the basis of a detailed knowledge of the conformational properties of these polymers, we have attempted an essentially empirical interpretation of the CD spectra and of their relative changes. A striking dependence of the optical properties from the conformational properties and/or transitions in the polymers has been found. Although far from suggesting a 1:1 correspondence between CD spectra and conformational changes, we wish to stress their general correspondence.     

π-Conjugated soluble and fluorescent poly(thiophene-2,5-diyl)s with phenolic,hindered phenolic and p-C6H4OCH3 substituents. Preparation,optical properties,and redox reaction

Dehalogenation polycondensation of 3-(4-methoxyphenyl)-2,5-dibromothiophene with Mg and a zerovalent nickel complex as well as chemical oxidative polymerization of 3-(4-methoxyphenyl)thiophene with FeCl₃ gives poly[3-(4-methoxyphenyl)thiophene-2,5-diyl] P3(4-MeOPh)Th. Treatment of soluble P3(4-MeOPh)Th with BBr₃ converts the OCH₃ group to an OH group and gives poly[3-(4-hydroxyphenyl)thiophene-2,5-diyl] P3(4-OHPh)Th. Oxidative polymerization of 3-[3,5-di-t-butyl-4-{(trimethylsilyl)oxy}phenyl]thiophene with FeCl₃ in an aqueous medium directly affords another kind of polythiophene with a sterically hindered phenolic group, poly[3-(3,5-di-t-butyl-4-hydroxyphenyl)thiophene-2,5-diyl] P3(4-OH-3,5-tBu₂Ph)Th. An organometallic dehalogenation polymerization using a nickel complex also affords P3(4-OH-3,5-tBu₂Ph)Th. All the polymers described above show strong photoluminescence in a region of 500–600 nm. Oxidation of P3(4-OH-3,5-tBu₂Ph)Th with PbO₂ gives stable radical species as confirmed by IR and ESR spectroscopy. Electrochemical redox behavior of the polymers is compared with that of other polythiophenes. © 1997 John Wiley & Sons, Inc.     

Synthesis and photochemical properties of poly(ester–amide)s containing norbornadiene (NBD) residues

N,N′‐Bis[(3‐carboxynorbornadien‐2‐yl)carbonyl]‐N,N′‐diphenylethylenediamine (BNPE) was synthesized in 70% yield by the reaction of 2,5‐norbornadiene‐2,3‐dicarboxylic acid anhydride with N,N′‐diphenylethylenediamine. Other dicarboxylic acid derivatives containing norbornadiene (NBD) residues having N,N′‐disubstituted amide groups were also prepared by the reaction of 2,5‐NBD‐2,3‐dicarboxylic acid anhydride with certain secondary diamines. When the polyaddition of BNPE with bisphenol A diglycidyl ether (BPGE) was carried out using tetrabutylammonium bromide as a catalyst in N‐methyl‐2‐pyrrolidone at 100°C for 12 h, a polymer with number average molecular weight of 69,800 was obtained in 98% yield. Polyadditions of other NBD dicarboxylic acid derivatives containing N,N′‐disubstituted amide groups with BPGE were also performed under the same conditions. The reaction proceeded very smoothly to give the corresponding NBD poly(ester–amide)s in good yields. Photochemical reactions of the obtained polymers with N,N′‐disubstituted amide groups on the NBD residue were examined, and it was found that these polymers were effectively sensitized by adding appropriate photosensitizers such as 4‐(N,N‐dimethylamino)benzophenone and 4,4′‐bis(N,N‐diethylamino)benzophenone in the film state. The stored energies in the quadricyclane groups of the polymers were also evaluated to be about 94 kJ/mol by DSC measurement of the irradiated polymer films. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 917–926, 1999     

2,5-Diamidofuran anion receptors

3,4-Diphenylfuran-2,5-dicarboxylic acid bis-N-phenylamide 1 and 3,4-biphenyl-furan-2,5-dicarboxylic acid bis-N-butylamide 2 have been synthesised and shown to act as fluoride selective anion receptors in DMSO-d₆/0.5% water solution.     

Mass spectral characterization of polymers. Primary thermal fragmentation processes in polyureas

The primary fragmentation processes in the thermal decomposition of polymers were studied in detail on a series of structurally related polyureas by direct pyrolysis with a mass spectrometer. Our results indicate that polyureas I–III undergo a quantitative depolycondensation process analogous to that observed for N-monosubstituted polyurethanes. The thermal decomposition of polyureas IV–VI proceeds by intramolecular hydrogen transfer processes that occur at higher temperatures with respect to depolycondensation. Polycarboxypiperazine VI is decomposed by a single-stage decomposition mechanism that leads to fragments with amino end groups and carbon oxide.     

Thermally stable silarylene-1,3,4-oxadiazole polymers

The effects of incorporating a p-phenylene- (or m-phenylene)-1,3,4-oxadiazole fragment into the backbone of poly[1,4-phenylene(diphenylsilyl)-1,4-phenylene-2,5-(1,3,4-oxadiazole)], which was developed by the authors, was investigated. Bis[(p-carbohydrazidophenyl)]diphenylsilane was copolymerized with dipentachlorophenyl terephthalate or isophthalate to produce the prepolymers poly[N-(p-diphenylsilylbenzoyl)-N′N″-(terephthaloyl)-N″′-(p-benzoyl)dihydrazide] and poly[N-(p-diphenylsilylbenzoyl)-N′,-N″-(isophthaloyl)-N″′-p-(benzoyl) dihydrazide], respectively. The polyhydrazides were converted by thermal dehydration into poly[1,4-phenylene(diphenylsilyl)-1,4-phenylene-(1,3,4-oxadiazole-2,5-diyl)-1,4-phenylene-2,5-(1,3,4-oxadiazole)] and poly[1,4-phenyl-ene(diphenylsilyl)-1,4-phenylene-(1,3,4-oxadiazole-2,5-diyl)-1,3,4-(oxadiazole)]. The new polymers were soluble in organic solvents. Films cast from these solutions exhibited good adhesion to glass and metal surfaces. Thermal analysis showed that the heat stability of all these polymers was about the same and that they were resistant to decomposition when heated in air to about 400°C. The results also indicated that these polymers were somewhat less heat-resistant than samples of poly-[1,4-phenylene(diphenylsilyl)-1,4-phenylene-2,5-]1,3,4-(oxadiazole) synthesized from bis(p-carbohydrazidophenyl)diphenylsilane and bis-(p-carbopentachlorophenoxy-phenyl)diphenylsilane.     

Exploiting the Chiral Ligands of Bis(imidazolinyl)- and Bis(oxazolinyl)thiophenes—Synthesis and Application in Cu-Catalyzed Friedel–Crafts Asymmetric Alkylation

Five new C₂-symmetric chiral ligands of 2,5-bis(imidazolinyl)thiophene (L1–L3) and 2,5-bis(oxazolinyl)thiophene (L4 and L5) were synthesized from thiophene-2,5-dicarboxylic acid (1) with enantiopure amino alcohols (4a–c) in excellent optical purity and chemical yield. The utility of these new chiral ligands for Friedel–Crafts asymmetric alkylation was explored. Subsequently, the optimized tridentate ligand L5 and Cu(OTf)₂ catalyst (15 mol%) in toluene for 48 h promoted Friedel–Crafts asymmetric alkylation in moderate to good yields (up to 76%) and with good enantioselectivity (up to 81% ee). The bis(oxazolinyl)thiophene ligands were more potent than bis(imidazolinyl)thiophene analogues for the asymmetric induction of the Friedel–Crafts asymmetric alkylation.