Oxazolidines versus schiff bases

The formation of oxazolidines from propionaldehyde and aliphatic β-aminoalcohols is complicated by the appearance of appreciable amounts of unsaturated Schiff bases. The simple Schiff base, often the dominant species when aromatic aldehydes react with amines, could not be detected in the present aliphatic systems. We conclude that in aliphatic systems the order of stability is and . The gem-dimethyl group α to nitrogen stablizes the heterocyclic ring remarkably.     

Effects of molecular weight,rubber toughening,and environment on fatigue crack propagation behavior of block amide copolymers

The Fatigue Crack Propagation (FCP) behavior of block amide copolymers is investigated as a function of molecular weight, rubber toughening as well as environmental conditions. The enhancement of FCP resistance with increasing average molecular weight is shown and correlated to features observed on the fracture surface. Particular attention is paid to hysteretic heating, measured with an infrared camera, in the crack tip zone of different average molecular weight copolymers and rubber-toughened copolymer. A FCP approach of stress-cracking in an aqueous solution of zinc chloride is proposed here. An improvement in FCP resistance as the average molecular weight increases, similar to that exhibited in normal environment, appears. The shift in da/dN values over the tested range of can be approximated by an exponential function:      

Interfaces between coexisting phases in polymer mixtures: What can we learn from Monte Carlo simulations?

Symmetric binary polymer mixtures are studied by Monte Carlo simulation of the bond fluctuation model, considering both interfaces between coexisting bulk phases and interfaces confined in thin films. It is found that the critical behavior of interfacial tension and width is compatible with that of the Ising model, as expected from the universality principle. In the strong segregation limit, only qualitative but not quantitative agreement with the self-consistent field (SCF) theory is found. It is argued that the SCF theory requires but for the short chains studied (N = 32 effective monomer units per chain), the limit is only reached for close to unity. Also, the effective χ-parameter decreases in the interface. It is shown that the interfacial width w does not increase by the adsorption of block copolymers as long as their areal density is still dilute (“mushroom” regime). But a broadening of interfaces does occur for thin films confined between walls at distance D, due to fluctuations that lead to for short-range forces, in agreement with experiment.     

Structural changes in polymers of diethyl succinylsuccinate(1,4-diethoxycarbonyl-2,5-dihydroxy-1,4-cyclohexadiene) with diamines at high temperatures

The structural changes of the polymers having the following structures: at high temperatures were studied by the spectroscopic and thermal analysis. When the polymers were heated in air, they were oxidized predominantly to polymers having the structure: The rate of oxidation was fast and the reaction was almost completed within 2 hr at 180°C. In the case of polymer 3, an intramolecular cyclization to form acridone was detected as a minor reaction.     

Durch Nachbargruppenbeteiligung induzierte (1,2)-Chlorwasserstoff-Eliminierung aus ionisiertem 2-(β-Chloräthyl)- benzoesäuremethylester

By using deuterium labelled compounds and collisional activation spectra the mechanism of the unusually intensive HCl elimination from 2-(β-chloroalkyl)benzoic acid methyl ester as well as the structure of the product ion have been elucidated. It can be shown that the structure of the stable ion (lifetime τ～10?5 s) is best represented by 2-vinyl benzoic acid methyl ester whereas the reactive ion (lifetime τ<10^?6 s) at least partially rearranges to a cyclic ion. The hydrogen chloride elimination from 2-(β-chloroalkyl)benzoic acid is apparently a simple 1,2 process. A closer examination reveals that the reaction represents a further example of an unusual neighbouring group participation of the ester function.     

Zur Darstellung von Cyclophosphaten,Cyclophosphatophosphonaten, Diphosphonaten und Diphosphiten in Harnstoffschmelzen

Preparation of Cyclophosphates, Cyclophosphatophosphonates, Diphosphonates, and Di-phosphites in Urea Melts Ammonium cyclotriphosphate (NH₄)P₃O₉, ammonium cyclotetraphosphate [P^IV? P^IV ? O? ]₂, ammonium cyclotriphosphatophosphonates Ammonium organyldiphosphonates And ammonium diphosphites are prepared in high yields on heating acidic phosphates, phosphonates, and phosphites in urea or urea/ammonium nitrate melts. The mechanism of the dehydration of phosphorus compounds containing POH groups in molten urea is discussed.     

Darstellung und Eigenschaften von Ti-substituierten N-Heterocyclen

Preparation and Properties of Ti-substituted N-Heterocycles The compounds (x = 2 to 6) have been prepared by transamination of Ti(NMe₂)₄ with the heterocyclic amines and have been characterised by elemental analyses and ¹H NMR and IR spectroscopy. The dependence on both x and n of the thermal decomposition has been studied for the series and . The results can be interpreted in terms of the steric strain of the R₂N and substituents. Apart from the piperidido groups none of the ligands exhibit protective group properties comparable to the R₂N groups.     

Effect of gegen ion in cationic polymerization and copolymerization of trioxane

p-Chlorophenyldiazonium hexafluorophosphate has been reported to be a superior catalyst for cationic polymerization and copolymerization of trioxane as compared to boron trifluoride dibutyl etherate (BF₃·Bu₂O)¹. In the present investigation the effect of anions derived from elements in Group VA, AsF and SbF, has been ascertained. It has been concluded that p-chlorophenyldiazonium hexafluoroarsenate is also a superior catalyst to boron trifluoride dibutyletherate (BF₃·Bu₂O), while p-chlorophenyl-diazonium hexafluoroantimonate is inferior. Copolymers with the highest polymer yield (>95%) and molecular weight (intrinsic viscosity = 4 to 5) were obtained with Simple dependences on catalyst concentration have been observed to hold for a wide catalyst concentration range ([M]/[C]) = (1 to 20) × 10⁵: For the same relationships hold. However, the polymer yield (75%) and molecular weights (intrinsic viscosity ?1) are considerably lower while the extent of chain transfer is higher. Furthermore, the polymerization proceeds with explosive violence. The quantitative aspects resulting from polymerization, for the most part, can be interpreted in terms of the extent of dissociation of the propagating ions.     

The pyrolyses of tri- and tetramethylethylene in the presence of nitric oxide

The pyrolyses of trimethylethylene and tetramethylethylene have been investigated in the presence and absence of nitric oxide. It appears that apart from a unimolecular split, e.g., a disproportionation reaction such as may play an important role in initiation. Nitric oxide had no effect on H₂ production, which is probably a molecular process. There was similar behavior of both compounds in the presence of NO, indicating that the olefinic hydrogen atom does not play a decisive role. Other aspects of the mechanisms are discussed.     

Synthesis and psychotropic properties of furyl- and thienyl-germatranes

Trihalogermyl-furans and -thiophenes were prepared by inserting germanium dibromide (GeBr₂) generated from the dibromogermane(II) dioxanate complex into the carbon-halogen bond of halo-furans and -thiophenes. Their ethanolysis and transesterification by triethanolamine yielded the germatranes which were subjected to psychotropic activity assays. The psychotropic properties of germatranes were found to depend on the type of the heterocycle and on the position of the germatrane moiety.     

Some new examples of cationic polymerization

Synthesis and properties of cis-and trans-methoxyvinyl chloride (MVC) are described. Both of these monomers can be polymerized with cationic initiators. From the ¹³C-NMR spectra it was concluded, that poly-(trans-MVC) is mainly threo-diisotactic. Copolymerization of cis-MVC with for instance trans-MVC or styrene or 1,3-dioxolane is also described. The ring-opening polymerization of 2-phenyl-2-oxazoline under different conditions was investigated. The molecular weights, determined by light-scattering and GPC are in the range between 10 000 and 350 000. A[η] -M- equation was derived. By hydrolysis with hydrochlorid acid high molecular weight poly(iminoethylene) was obtained. The ring-opening polymerization of 1-azabicyclooctane [4.2.0] (conidine) with different catalysts as well as the properties of the polymers were studied in detail. By means of a “mixed-mechanism technique” well defined styrene-conidine diblock copolymers are available.     

Chlorine Dioxide as an Electron-Transfer Oxidant of Olefins. Preliminary Communication

The kinetics and product studies of oxidation of eight olefins 1 - 8 by ClO₂ in H₂O in the pH range 3-7 are described. The reaction is faster as the pH decreases. At pH < 4, ClO₂ reacts equimolarly with olefins to yield isomeric mixtures of chlorohydrines and 1,2-dioxygenated products, following the equation: The order of reactivity is: (E)-stilbene > indene > β-methylstyrene > acenaphthylene > α-methylstyrene > styrene > cyclohexene > allylbenzene. A multi-stage radical-cation mechanism is proposed, in which an initial reversible protonation: is followed by an electron-transfer stage (rate-determining): The cation-radical thus produced, adds rapidly an additional ClO₂ to form dioxygenated products. The chlorohydrines most likely arise from HClO additions to the olefinic double bonds, which, in turn, generate from dismutation of 2 HClO₂ into HClO + H⁺ + ClO.     

Structure of the tetramer of α-methylstyrene

The structure of the tetrameric dianion formed by α-methylstyrene in tetrahydrofuran by reaction with sodium has been examined. Mass spectral, NMR, infrared, and kinetic data all indicate that the structure is rather than the structure which had previously been assumed for this species.     

Living cationic polymerization of 2-chloroethyl vinyl ether: Kinetics,mechanism and application to polymer synthesis

The cationic polymerization of 2-chloroethyl vinyl ether initiated by HI/weak Lewis acid (I₂ or ZnI₂) systems has been studied from both a kinetic-mechanistic and a synthetic viewpoint. At low temperature and in toluene as solvent, the polymerization proceeds via a living process and the kinetic order with respect to monomer varies according to the nature of the Lewis acid activator. This behaviour can be explained by the coordination of the Lewis acid with both the monomer and the chain-end, the latter leading to a strong activation of the -I bond towards monomer insertion. The living polymerization obtained from divinylether precursors leads to -I ended telechelics, and their transformation into dihydroxytelechelic oligomers has been performed. The chemical modification of chloroalkyl side groups by phase transfer catalysis allows the attachment of specific groups without consumption of-OH ends.     

Studien zum Chemischen Transport von Nickel mit Kohlenmonoxid im geschlossenen Reaktionsraum [1]

Studies on the Chemical Transport of Nickel with Carbon Monoxide in a Sealed Reaction Space The chemical transport of nickel by means of carbon monoxide (equation (1)) has been investigated experimentally in closed ampoules of a special shape. Besides the experiments the transport rate has been calculated approximately for different models assuming equilibrium between solid and gas motion by diffusion and stoichiometric flow. It is shown that the transport rate calculated in this way (with one exception) is between the limits given by calculation for diffusion only and neglecting the stoichiometric flow. The equilibrium pressures calculated with ΔH°₁(298) = ?35.0 kcal lead to transport rates which agree approximately with the rate determined experimentally (c. f. Table 4).     

High‐Yielding Synthesis of the Anti‐Influenza Neuramidase Inhibitor (−)‐Oseltamivir by Three “One‐Pot” Operations

Taking shortcuts : A remarkably short and high‐yielding asymmetric total synthesis of (?)‐oseltamivir takes advantage of organocatalysis and single‐pot domino operations. The target, known as the drug Tamiflu, is prepared efficiently in a short time, and also its derivatives can be synthesized effectively.

     

Modification of poly(vinyl alcohol) through reaction with phosphorus-containing reactants

Crosslinked products of the form: and have been formed from the interfacial condensation of phosphorus diacid halides with poly(vinyl alcohol). Product yield and amounts of phosphorus reactant included in the product increases as the amount of base increases. Product stability in aqueous systems decreases in the order neutral > base > acid.     

Metastable decompositions of cyclopentanol ions and [C5H10O]+˙ ions with the oxygen on the first carbon

Ionized cyclopentanol and [C₅H₁₀O]+˙ ions with the oxygen on the first carbon lose methyl, ethylene, ethyl, ethane and water in their metastable decompositions. We show by collisionally activated decompositions of the products that the losses of ethyl form CH₃CH₂C?O⁺, the losses of ethylene form , and the losses of methyl probably yield . Deuterium labeling indicates that ethyl loss from ionized cyclopentanol occurs following α-cleavage of the ring, isomerization to the enol isomer of ionized n-pentanal and subsequent isomerization to the 3-pentanone ion.     

ESR evidence for main-chain scission produced by mechanical fracture of polymers at low temperature

ESR spectra have been observed from several polymers (polyethylene, polypropylene, polymethylmethacrylate, polytetrafluoroethylene, and polybutadiene) which were mechanically fractured in vacuum at 77°K. The spectra permit identification of the free radicals produced in chain scission. It has been demonstrated for the polymers of the type such as polypropylene and poly(methyl methacrylate), that the mechanical fracture produces two different scission radicals in pairs, namely, The results indicate convincingly that microscopic scission of polymer chains is caused by macroscopic destruction of polymeric material. The critical molecular size for mechanical rupture of polyethylene chains was experimentally determined to be a degree of polymerization between 70 and 100. This size agrees fairly well with the value predicted from a theoretical model.