Preparation and properties of anionic transition metal complexes containing triheterocarbenium ions

Summary Thermally stable anionic tetracarbonylcobalt complexes containing triheterocarbenium ions, [Co(CO)₄]^–[cation]⁺, have been synthesized by the ion exchange reaction of [Co(CO)₄]^–PPN⁺ with the corresponding carbenium ions. Similar molybdenum complexes containing cyclopentadienyl and carbonyl ligands were also prepared. The complexes were characterized by elemental analyses and by i.r. and n.m.r. spectroscopies. The ionic structures of the complexes are confirmed on the basis of their large electric conductivities.     

Transition metalcarbon bonds XXXVII. platinum acetylide complexes formed from ethynyl alcohols or ethers

Several new platinum(II) acetylide complexes, trans-{Pt[CCCR₁R₂(OR₃)]₂-L₂} (R₁, R₂  H, Me, Et; CR₁R₂  cyclohexylidene; R₃  H, Me or Ph), trans-[Pt(CCCH₂CH₂OH)₂L₂], trans-[Pt(p-tolylacetylide)₂L₂] and trans-[PtX(p-tolylacetylide)L₂] (L  PMe₂Ph or in one case, AsMe₂Ph) have been prepared. Platinum(II) acetylide complexes with tertiary hydroxyl groups are easily dehydrated by acetic anhydride/pyridine to give platinum-enyne complexes. Analogous compounds with primary hydroxyl groups do not dehydrate but give acetates. ¹H and ¹³C NMR data are given and the shift reagent Eu(fod)₃ was used to analyse the ¹H NMR spectrum of trans-[Pt(CCCH₂CH₂OH)₂(PMe₂Ph)₂].     

Preparation and complexation properties of polystyrene resins containing diethylenetriamine derivatives

Styrene-divinylbenzene copolymer resins containing a series of diethylenetriamine derivatives have been prepared and characterized. The multidentate ligands are covalently bound to the polymer matrix without causing inter- and intrastrand bridging structures. The properties of the present chelating resins have been examined with respect to the uptake of transition metal ions.     

Synthesis and characterization of platinum diimine bis(acetylide) complexes containing easily derivatizable aryl acetylide ligands

New Pt(II) diimine bis(acetylide) complexes where the diimine is a substituted bipyridine or phenanthroline and the arylacetylide is 4-ethynylbenzaldehyde have been prepared in good to excellent yields. Spectroscopic characterization supports a square planar coordination geometry with cis-alkynyl ligands, and the crystal structure of one of the complexes, Pt(phen)(Ctbd1;CC(6)H(4)CHO)(2) (1), confirms the assignment. The new diimine bis(acetylide) complexes exhibit an absorption band ca. 400 nm that corresponds to a Pt(d) --> pi diimine charge transfer transition and are brightly emissive in fluid solution, with excited state lifetimes in the range 100-800 ns. Correlation of diimine substituent with lambda(max) for the 400 nm absorption band gives strong support to the MLCT assignment. Complex 1 undergoes electron transfer quenching, showing good Stern-Volmer behavior with a variety of oxidative and reductive quenchers. Quenching studies conducted with DNA nucleosides (A, T, C, G) were also investigated. Silyl-protected adenosine and guanosine were found to quench the luminescence of 1 better than similarly protected cytidine or thymidine. Since the former are the more easily oxidized bases, the results suggest that the Pt(II) diimine bis(acetylide) complexes are more powerful photooxidants than photoreductants with regard to electron transfer to DNA bases.     

Polyoxometalate tri-supported transition metal complexes containing mixed-valent transition metal ions

Three compounds, [AsMo₈V₆O₄₂][Cu(2,2?-bpy)₂]₂[Cu(2,2?-bpy)]·4H₂O (1), [PMo₈V₆O₄₂][Cu(2,2?-bpy)₂]₂[Cu(2,2?-bpy)]·3H₂O (2) and [PMo₈V₆O₄₂][Cu(2,2?-bpy)₂]₂[Cu(2,2?-bpy)]·3.5H₂O (3), have been synthesized under hydrothermal conditions and characterized by IR, UV–vis, XRD, TG, elemental analysis, and X-ray diffraction analysis. Single-crystal X-ray structure analysis reveals that 1 and 2 are isostructural and isomorphous, whereas 2 and 3 are polymorphs. Polymorphs of 1 have not been synthesized yet. The mixed-valent transition metal ion in 1–3 has been further confirmed by TG analyses. Catalytic properties of 1 and 2 have also been studied.     

Preparation, characterization and thermal studies of some transition metal ternary complexes

Ternary complexes of Co(II), Ni(II), Cu(II) and Zn(II) with nitrilotriacetic acid as a primary ligand and glycine as secondary ligand were prepared in slightly acid medium. Their molecular masses were determined by acid-base titration against standard potassium hydroxide solution. Their molecular structures were found to be [M (HNTA)(glyH)(2H₂O)]. Thermogravimetric analysis confirmed this structure and that the water present is coordinated to the central metal atom. UV-Vis spectra showed that the complexes have octahedral symmetry. IR spectra suggested the presence of intermolecular hydrogen bonding. This phenomenon was supported by mass spectra. The ionization constants of these complexes, as diprotic acids, were determined.     

Synthesis and characterization of a hydrazone ligand containing antipyrine and its transition metal complexes

The coordination chemistry of N′-((1,5-dimethyl-3-oxo-2-phenyl-2,3-dihydro-1H-pyrazol-4-yl)methylene)-2-hydroxybenzohydrazide with copper(II), nickel(II), cobalt(II), manganese(II), zinc(II), palladium(II), iron(III), ruthenium(III), uranyl(VI), and titanium(IV) has been studied. The ligand and its complexes was characterized by elemental and thermal analyses, magnetic moments and conductivity measurements as well as spectroscopic techniques such as infrared, mass spectra, nuclear magnetic resonance, electron spin resonance and electronic absorption spectra. The spectral data showed that the ligand is monobasic tridentate coordinated via the enolic carbonyl oxygen of the hydrazide moiety, azomethine nitrogen and pyrazolone oxygen atoms.     

Synthesis and characterization of some transition metal complexes containing a nitrogen-oxygen donor macrocyclic ligand

Summary The synthesis and characterization of some Co^II, Ni^II and Cu^II complexes with a nitrogen-oxygen donor macrocyclic ligand is reported. Analytical data, i.r. and visible spectra are compatible with an octahedral or distorted octahedral coordination around the metal. For each of the CoL(NCS)₂ and NiL(NCS)₂ complexes, two crystalline forms were obtained, having different i.r. absorptions for the thiocyanate groups and different x-ray powder diffraction spectra; the pairs of Co-Ni complexes appear to be isostructural.     

Study on metal complexes of chelating resins bearing iminodiacetate groups

Cu(II), Co(II) and Ni(II) complexes of chelating resins (CR) bearing iminodiacetate (IDA) ligands were prepared. The CR-metal complexes were characterized by FT-IR spectroscopy, X-ray diffraction (XRD), thermal behavior (TG and DTG) under nitrogen atmosphere, and electron paramagnetic resonance (EPR). FT-IR spectra of the CR-metal complexes showed the characteristic bands of CR were still present but red-shifted after the metal complexation, and new bands assigned to Me-N bonds were observed. Thermal behavior of the metal-CR complexes supported the metal complexation, metal complexation leading to the decrease of the thermal stability of the CR, the lowest thermal stability being found when the highest amount of Cu(II) was loaded. Based on the EPR results and the thermal behavior of Cu(II)-CR complexes, the scheme for the complexation of Cu(II) on the CR was suggested.     

Preparation and properties of macroreticular resins containing thiazole and thiazoline groups

Three macroreticular polystyrene-based resins with amino- or imino-thiazole and thiazoline groups as the functional groups have been prepared. The resins are highly stable in acid and alkaline solutions and have high selectivity for mercury(II). In the presence of hydrochloric acid, sorption of mercury attains equilibrium fairly rapidly, the time for 50% uptake of mercury being 3-6 min. There are practically no interferences. In a column operation, mercury is quantitatively recovered by elution with 0.1M hydrochloric acid containing 5% thiourea. The thiazoline resin column can be used to concentrate mercury from sea-water.     

Preparation and characterization of polystyrene latexes bearing disaccharide surface groups

Emulsifier-free polystyrene latexes covered with disaccharide species have been prepared by a seed (co)polymerization method in the presence of a hexylmethacrylate-terminated oligosaccharide 6-(2-methylpropenoyloxy)hexyl -d-cellobioside (CHMA). First, the surface activity of this macromonomer was studied using ring and drop volume methods, respectively. Then, its polymerization onto polystyrene seed latexes was carried out upon varying experimental conditions: particle size, solid contents of the seed and type of comonomer. Analysis of the macromonomer distribution between aqueous and polymer phases suggested that an optimal surface yield can be reached upon increasing the overall surface area of particle and or using methylmethacrylate as comonomer. Finally, the presence of the disaccharide residues at the particle surface was shown, either directly using NMR and ESCA analysis, or indirectly through the comparison of the electrophoretic mobility behavior of the seed polystyrene and functionalized latexes.     

Synthesis of linked metal acetylide complexes for nonlinear optics

Treatment of [Mn(CO)₅Br] (1) with a slight excess of Me₃SnCCPh affords the known species [(CO)₅Mn(CCPh)] (2), whereas reaction between 1 and Me₃SnCCRCCSnMe₃ (R = p-C₆H₄C₆H₄) gives the bimetallic complex [(CO)₅MnCCRCCSnMe₃] (3). This latter species is a good precursor for other syntheses, and treatment of 3 with a further equivalent of 1 gives [(CO)₅MnCCRCCMn(CO)₅] (4), while 3 with trans-[Pd(PBu₃)₂Cl₂] affords [(CO)₅MnCCRCCPd(PBu₃)₂Cl] (5).     

Preparation and characterization of some transition metal complexes of benzoic acid hydrazones of 2-aminonicotinaldehyde

Summary Cu^II, Ni^II, Co^II, Zn^II and Pd^II complexes of tridentate Schiff base ligands derived from the condensation of benzoic acid hydrazides with 2-aminonicotinaldehyde have been prepared and characterized. For M=Cu, Ni, Co and Zn the complexes were formulated as [M(ligand)(H₂O)X] (X=Cl, Br), with a distorted octahedral geometry and tridentate Schiff base ligands. The Pd complexes were formulated as Pd(ligand)Cl₂, with square planar geometries and bidentate Schiff base ligands. The e.s.r. spectra of the Cu^II complexes are discussed.     

The synthesis and characterization of ( E,E )-dioxime and its transition metal complexes containing 12-membered macrocycles linked to ferrocenyl-methyl groups

13,14-bis(Hydroxyimino)-4,7-bis(ferrocenylmethyl)-2,3,4,5,6,7,8,9-octahydrobenzo[k]-4, 7-diaza-1,10-dithiacyclododecine[13,14-g]-quinoxaline (H₂L) has been prepared from (E,E)-dichloroglyoxime and 12,13-diamino-4,7-bis(ferrocenylmethyl)-2,3,4,5,6,7,8,9-octahydrobenzo[k]-4,7-diaza-1,10-dithiacyclododecine which was synthesized from 12,13-dinitro-4,7-bis(ferrocenylmethyl)-2,3,4,5,6,7,8,9-octahydrobenzo[k]4,7-diaza-1,10-dithia cyclododecine. Mononuclear nickel(II) and copper(II) complexes of H₂L have a metal-ligand ratio of 1?:?2 and the ligand coordinates through two nitrogen atoms, as do most (E,E)-dioximes. The homotrinuclear [Cu(L)₂Cu₂(dipy)₂](NO₃)₂ compound coordinates to the other two copper(II) ions through deprotonated oximate oxygens and two 2,2′-dipyridyl as an end-cap ligand to yield the trinuclear structure. The ligand and its complexes have been characterized on the basis of ¹H, ¹³C NMR, IR and MS spectroscopy and elemental analyses.     

Synthesis,characterization and antimicrobial studies on 13-membered-N6-macrocyclic transition metal complexes containing trimethoprim

Asymmetrical macrocyclic complexes of Mn^II, Co^II, Ni^II, Cu^II and Zn^II have been synthesized by the template process using bis(benzil)ethylenediamine as precursor. Bis(benzil)ethylenediamine reacts with transition metal chlorides and trimethoprim in a 1:1:1 molar ratio in methanol to give several solid metal complexes of the general composition [M(L)X₂] (M = Mn^II, Co^II, Ni^II, Cu^II and Zn^II, L = ligand and X = Cl^?). They were characterized by physicochemical and spectroscopic techniques. Based on analytical, spectral and magnetic moments, all the complexes are identified as distorted octahedral structures. All the complexes are of the [M(L)X₂] type. The shifts of the ν(CN) (azomethine) stretches have been monitored. To find out the donor sites of the ligands, the activity data show that the metal complexes are more potent than the parent ligand. The [M(L)X₂] complexes showed a broad spectrum of antimicrobial activity in vitro against both gram-positive and gram-negative human pathogenic bacterial isolates and the antimicrobial spectrum enhanced only with a combination of metal chlorides and trimethoprim complex. From the results it is imperative that the synthesized macrocyclic [M(L)X₂] complexes exhibit potent broad spectrum antibacterial activity.     

Synthesis and reactivity of transition metal complexes containing halogenated boryl ligands

The synthesis and characterization of iron and manganese complexes containing the tetrachlorocatecholboryl (BO₂C₆Cl₄) ligand are reported. Crystallographic study of the methylcyclopentadienyl derivative (η⁵-C₅H₄Me)Fe(CO)₂BO₂C₆Cl₄ allows comparison of structure and bonding with related complexes of the type (η⁵-C₅R₅)Fe(CO)₂B(OR)₂ and reveals that the relative orientation of (η⁵-C₅H₄Me)Fe(CO)₂ and BO₂C₆Cl₄ moieties is influenced by intramolecular CH?O hydrogen bonding. Additionally, an alternative route to catecholboryl complexes from dilithiocatechol is reported.     

High‐performance aromatic thermosetting resins with hydroxyl and ethynyl groups

A novel hydroxyl‐ethynyl‐arene (HEA) resin was synthesized via Aldol condensation and Sonogashira reaction. The structure of the obtained resin was confirmed by the techniques of mass spectroscopy (MS), gel permeation chromatography (GPC), proton nuclear magnetic resonance spectroscopy (¹H‐NMR), Fourier transform infrared spectroscopy, (FT‐IR) and elemental analysis (EA). Differential scanning calorimetry (DSC) results showed an exotherm at the temperature range of 187°C–245°C, attributable to crosslinking reaction of the acetylene groups. After thermal cure, the obtained cured resin possessed excellent thermal stability. Thermal gravimetric analysis (TGA) in nitrogen showed the Td₅ (temperature of 5% weight loss) was about 400°C, and the char yield in nitrogen was about 78% at 900°C. The laminate composite of HEA resin was prepared and its mechanical and thermal properties were determined. The usefulness of the HEA resin as matrix for ablative composite was evaluated. Copyright © 2010 John Wiley & Sons, Ltd.