Studies on the hydrolytic polymerization of chromium (III) ion: IX. Revision of graphical method for the reaction in the presence of maleic acid by computer

The hydrolytic polymerization of Cr²⁺ in the presence of maleic acid was studied by equilibrium pH method at 60°C and constant ionic strength. Both maleic acid and Cr³⁺ are of three different concentrations: 0.006, 0.008, 0.01 mol·L^?1. The state of Cr³⁺ in aqueous solution were determined by graphical method and pqr analysis. The following species were found (CrA)^+, Cr-(OH)A and Cr₂(OH)₂A₂. The results by graphical method were revised by computer calculation with data of about fifty experimental points. Hydrolysis constants of all species were obtained with good fitting. It is obvious that the results obtained by program LEMIT are more accurate than those by graphical method. Mechanism of Cr³⁺ polymerization in the presence of maleic acid is also discussed.     

Effects of acids on vinyl polymerization initiated by chromous acetate-alkyl halide

Effects of various acids, i.e., acetic, chloroacetic, hydrochloric, and sulfuric acids on the polymerization of styrene initiated by Cr²⁺–CHCl₃ in DMF was studied. These acids reduced the rates of polymerization by Cr²⁺–CHCl₃ initiator systems. This phenomenon could be explained by a decrease of the reducing power of Cr²⁺ for alkyl halide. On the other hand, chloroacetic acids could initiate the polymerization of styrene without CHCl₃ because these acids have active chlorine in the molecule for Cr²⁺. It was found that the polymer obtained by this initiator system had an endgroup containing chromium carboxylate, therefore this polymer was green in color and insoluble in benzene.     

Hexavalent Chromium-Thioacetamide Redox System Initiated Polymerization of Acrylonitrile

Polymerization of acrylonitrile initiated by the Cr⁶⁺/thioacetamide redox system was studied in nitrogen atmosphere in the temperature range 35–45°C. The rate of polymerization and the rate of Cr⁶⁺ ion disappearance were measured. The effect of certain water-miscible organic solvents, neutral electrolytes, and complexing agents on the rate of polymerization was investigated. Chromic acid alone did not initiate the polymerization under deaerated and undeaerated conditions. Depending on the results obtained, a suitable kinetic scheme was proposed and various rate parameters were evaluated.     

Tuning the Redox Chemistry of a Cr/SiO2 Phillips Catalyst for Controlling Activity,Induction Period and Polymer Properties

The Cr/SiO₂ Phillips catalyst has taken a central role in ethylene polymerization ever since its discovery in 1953. This catalyst is unique compared to other ethylene polymerization catalysts, since it is active without the addition of a metal-alkyl co-catalyst. However, metal-alkyls can be added for scavenging poisons, enhancing the catalyst activity, reducing the induction period and altering polymer characteristics. Despite extensive research into the working state of the catalyst, still no consensus has been reached. Here, we show that by varying the type of metal-alkyl co-catalyst and its amount, the Cr redox chemistry can be tailored, resulting in distinct catalyst activities, induction periods, and polymer characteristics. We have used in-situ UV-Vis-NIR diffuse reflectance spectroscopy (DRS) for studying the Cr oxidation state during the reduction by tri-ethyl borane (TEB) or tri-ethyl aluminum (TEAl) and during subsequent ethylene polymerization. The results show that TEB primarily acts as a reductant and reduces Cr⁶⁺ with subsequent ethylene polymerization resulting in rapid polyethylene formation. TEAl generated two types of Cr²⁺ sites, inaccessible Cr³⁺ sites and active Cr⁴⁺ sites. Subsequent addition of ethylene also revealed an increased reducibility of residual Cr⁶⁺ sites and resulted in rapid polyethylene formation. Our results demonstrate the possibility of controlling the reduction chemistry by adding the proper amount and type of metal-alkyl for obtaining desired catalyst activities and tailored polyethylene characteristics.     

Trace metal-ion catalysis: kinetics and mechanism of oxidation of l-ascorbic acid by chromium(VI) in phosphate buffers

Summary The kinetics of oxidation of l-ascorbic acid (H₂A) by Cr^VI with and without added Cu^II conforms to the stoichiometry represented by the equation: 2Cr^VI + 3H₂A 2Cr^III + 3A + 6H⁺ where A is dehydroascorbic acid. The mode of the electron transfer from H₂A to Cr^VI is suggested to involve oxidative decomposition of an intermediate complex. Catalysis by Cu^II is indicated via complexation of the catalyst and substrate. The inhibitory effects of Cl^–, NO _f3 ^p– and SO _f4 ^p2– ions indirectly support complexation between Cr^VI and H₂A.     

Austausch von Chrom(III) mit Chrom(II) und Szilard—Chalmers-Reaktion von Kaliumchromat

Zusammenfassung Durch Versuche mit⁵¹Cr wird gezeigt, daß Cr³⁺ mit Cr²⁺ austauscht, wenn man ein Chrom(III)-Salz in wässeriger Cr²⁺-Lösung auflöst, d. h. die Hydratation zum reaktionsträgen [Cr(H₂O)₆]³⁺ verläuft relativ langsam. Die Bedeutung dieses Austausches für dieSzilard—Chalmers-Reaktion von Chromat wird diskutiert.

---

Experiments with⁵¹Cr prove the exchange of Cr³⁺ with Cr²⁺ when a Cr(III)-salt is dissolved in an aqueous solution of Cr²⁺. This indicates that the hydration to the inert [Cr(H₂O)₆]³⁺ is relatively slow. The importance of this exchange for theSzilard—Chalmers reaction of chromate is discussed.

     

Effects of ligands on the “living” radical polymerization initiated by the aged Cr2+ plus benzoyl peroxide system

The “living” radical polymerization of methyl methacrylate with the aged Cr²⁺ plus benzoyl peroxide (BPO) system in the presence of various amines as ligand has been studied in N,N′-dimethylformamide. Aliphatic amines such as ethylenediamine diminished the rate of polymerization, while dipyridyl (dipy) and o-phenanthroline (phen) accelerated the polymerization rate as follows: phen > dipy > pyridine ? none. Specifically, the rate of polymerization in the presence of phen had a maximum value at [phen]/[Cr²⁺] = 0.5. The retardation of polymerization by aliphatic amines was explained by the interaction of BPO with free and coordinated amines. The latter result may support the mechanism involving the complexed radical proposed for the living radical polymerization with the aged Cr²⁺ + BPO system. In the presence of phen the effects of aging period and aging temperature as well as polymerization temperature were studied and the nature of complexed radicals is discussed.     

Preparation and characterization of silicate gel glasses containing Cr2O3

The effect of thermal treatment on the structural incorporation of Cr₂O₃ in xCr₂O₃·(100 – x)SiO₂ and 5R _n O·xCr₂O₃·(95 – x)SiO₂ (where x=0.01–1 mol.% and R=Li, Na and Ca) gel glasses was studied by optical absorption spectrophotometry, DTA-TG, XRD and electron microscopy.Samples heat treated at 60°C have green color due to the presence of Cr³⁺ in octahedral coordination. The optical transmission, and color (yellow, orange or ambar), of the samples heat treated between 200 and 700°C prove that Cr³⁺ (octahedrally coordinated) and Cr⁶⁺ (tetrahedrally coordinated) are both present. Segregation of Cr₂O₃ take place at temperatures above 800°C.In reducing conditions the gel glasses were green due to the presence of a high content of Cr³⁺ ions. Samples containing Li or Na show crystalline phases at temperatures below 850°C.     

Kinetics of polymerization of acrylic acid initiated by Mn3+–isobutyric acid redox system. II

The kinetics of redox -initiated polymerization of acrylic acid (AA) by the systerm Mn³⁺-isobutyric acid (IBA) in sulfuric acid was studied in the temperature range of 35–50°C. The overall rates of polymerization (R_p), disappearance of manganic ion (?R_m), and degree of polymerization (X _n), were measured with variation in [monomer], [Mn³⁺], [IBA], H⁺, μ, [Mn²⁺], and temperature. The polymerization is initiated by the organic free radical that develops from the Mn³⁺-isobutyric acid oxidation reaction. Two types of termination reactions, one by the metal ion (Mn³⁺) and the other by the MN³⁺-isobutyric acid complex are proposed to explain the kinetic results. The various rate parameters were evaluated an discussed.     

Effect of amines on vinyl polymerization initiated by chromous acetate–alkyl halide systems

The radical polymerization of vinyl monomers initiated by Cr²⁺–RX in the presence of various amines was studied in DMF at 30°C. Polyamines able to form the chelate complex with Cr²⁺ accelerated the rate of polymerization of styrene in the following order: ethanolamine > triethylenetetramine > diethylenetriamine > ethylenediamine. However, aliphatic monoamine, hexamethylenediamine, and aromatic diamine did not have any effect on the polymerization. These results suggest that the effect of multidentate ligands may be associated with chelating effects which affect the electron transfer ability of the metal complex. An apparent activation energy of 8.2 kcal/mole for the polymerization of styrene was obtained in the presence of ethanolamine. With the Cr²⁺–CHCl₃ system, on addition of ethanolamine, the polymerization of methyl methacrylate was accelerated, and acrylonitrile and vinyl chloride, could be polymerized.     

Kinetics and Mechanism of Cr(VI) Reduction in a Water Cathode Induced by Atmospheric Pressure DC Discharge in Air

The process of reduction of Cr⁶⁺ ions (solution of potassium dichromate, K₂Cr₂O₇) in a water cathode was studied during a DC discharge in air. The concentration range of Cr⁶⁺ was (5.7–19) ×10^?5 mol/l and discharge current range was 20–80 mA. Cr⁶⁺ ions were shown to be reversibly reduced under a discharge action. The equilibrium degree of reduction increased with increasing initial concentration of the solution at fixed discharge current. At fixed initial concentration the reduction degree increased with increasing discharge current. The reduction degrees so obtained were 0.34–0.84. A kinetic scheme of the processes taking place in a solution was proposed. The calculated data obtained as a result of application of this scheme described well the experimental results on Cr⁶⁺ kinetics. The main processes of Cr⁶⁺ reduction and Cr³⁺ oxidation were revealed. HO ₂ ^· radicals and hydrogen peroxide were shown to be responsible for Cr⁶⁺ reduction whereas ^·OH radicals and O₂ molecules provide the reverse process of Cr³⁺ oxidation to Cr⁶⁺. The mechanism of action of phenol additives improving the process efficiency is discussed. The efficiency of phenol action as a radical scavenger was shown to be determined with its mass-transfer to the reaction area rather than chemical reaction rate.     

Surface characteristics of high corrosion resistant Ni–Nb–Zr–Ti–Ta glassy alloys for nuclear fuel reprocessing applications

This work firstly discovered that the Ni₆₀Nb₁₅Zr₅Ti₁₅Ta₅ metallic glass exhibits high corrosion resistance in boiling 6 N HNO₃ solutions with and without Cr⁶⁺ ions, which may be of great potential for nuclear fuel reprocessing applications. The high corrosion resistance of the alloy is due to the formation of the passive film composed exclusively of Nb⁵⁺ and Ta⁵⁺ cations after immersion in the solution without Cr⁶⁺ ions, and Nb⁵⁺, Ta⁵⁺ and Cr³⁺ cations after immersion in the solution with Cr⁶⁺ ions.     

The electrochemical reduction mechanism of trivalent chromium in the presence of formic acid

The electrochemical reduction process of trivalent Cr in the presence of formic acid is studied. The compositions of Cr complexes in electrolytes and products on cathode are investigated using ultraviolet–visible absorption spectroscopy (UV–Vis) and X-ray photoelectron spectroscopy (XPS), respectively. The geometric structures of the original and transition state ions during the electroreduction process are optimized, using density functional theory with General Gradient Approximation/Perdew-Wang 91 (GGA/PW91) calculation. The trivalent Cr primarily exists in the form of [Cr(H₂O)₆]³⁺ in the solution. [Cr(H₂O)₆]³⁺ exhibits regular-octahedron structure which is unfavorable for center Cr³⁺ to contact cathodic electrons. In the presence of formic acid, formate ion promotes the formation of the reactive intermediate, [Cr(H₂O)₄CHOO]²⁺, which possesses irregular-octahedron structure with Cr³⁺ ion as a vertex. In this case, Cr³⁺ ion can contact the cathode and then obtain electrons easily.     

Mechanism of Polymerization of α-Olefins on Oxide Catalysts

The polymerization of ethylene on a chromic oxide catalyst with and without a solvent has been studied. It was found that the active catalyst surface is formed exclusively as a result of its interaction with ethylene. This interaction is accompanied by the formation of products which poison the surface of the catalyst when they are sorbed on it in the absence of a solvent. A catalyst which contains no Cr⁺⁶ atoms as a result of reduction by alcohol is inactive. On the other hand, a catalyst which contains only Cr⁺⁶ atoms becomes active only after it has been partially reduced. The most probable product of this reduction is trivalent chromium atoms. The results obtained have given grounds for the assumption that the active complex contains Cr⁺⁶ and Cr⁺³ atoms. A possible mechanism of the reaction is discussed. Owing to the oxidative action of CrO₃ on the ethylene molecules, part of the Cr⁺⁶ is reduced to Cr⁺³, and the trivalent chromium becomes alkylated. The monomer molecule is added at the Cr⁺³—C bond thus formed. A strong Lewis acid, CrO₃, lowers the electron density on the Cr⁺³ atom. This increases the strength of the Cr⁺³—C bond and the ability of the Cr⁺³ atom to coordinate with the monomer molecule. The monomer molecule enters the chain at the moment when the strength of the Cr^?3—C bond is weakened due to coordination of this molecule with the Cr⁺³ atom.     

BODIPY Immobilized MCM-41 Based Multianalyte Sensor: Application in Detection and Removal of Trivalent (Al3+, Cr3+) and Divalent (Cu2+, Hg2+) Metal Ions in Aqueous Media

In the present study, a novel p-phenylcarboxylic acid BODIPY ( L ) immobilized MCM-41 based solid chemosensor material L-propylsilyl@MCM-41 ( MS4 ) was developed to detect multiple metal ions in a pure aqueous medium. The synthesized solid chemosensor material MS4 shows high sensitivity and removal ability towards trivalent (Al³⁺, Cr³⁺) and divalent (Cu²⁺, Hg²⁺) metal ions. The emission intensity of MS4 enhanced multifold selectively in the presence of trivalent (Al³⁺, Cr³⁺) metal ions and shows quenching in the presence of divalent (Cu²⁺, Hg²⁺) metal ions. The limit of detection was calculated to be in the nanomolar range with Al³⁺, Cr³⁺, Cu²⁺_, and Hg²⁺ metal ions in the aqueous medium. The spectroscopic and analytical results suggest that MS4 selectively binds with Al³⁺ and Cr³⁺ through −NH functionality and with Hg²⁺ and Cu²⁺ through −COOH functionality of p-phenylcarboxylic acid BODIPY ( L ). Further, MS4 selectively removes Al³⁺, Cr³⁺, Cu²⁺, and Hg²⁺ metal ions from the aqueous media with removal efficiency of 97.28 %, 96.34 %, 87.19 %, and 95.63 %, respectively. No noticeable change in the concentration was observed for other metal ions. The recycling potential of MS4 was evaluated using EDTA for up to seven cycles with no significant reduction in sensing capability.     

Electrochemical and surface science investigations of PtCr alloy electrodes

Electrodes of supported Pt, modified with Cr, have shown an increase in electrochemical activity for oxygen reduction in phosphoric acid fuel cells over supported Pt only electrodes. To clarify the role of chromium and its chemical nature at the electrode surface, we have characterized a series of Pt_xCr(_1-x) bulk alloys (x = 0.9, 0.65, 0.5, 0.2) by electrochemical and ex-situ surface science methods. In this paper we report the surface characterization of native and post-electrochemical electrodes by XPS, cyclic voltammetry in 0.05 M H₂SO₄ and 85% H₃PO₄, and analysis of 0.05 M H₂SO₄ electrolyte following electrochemical treatment. The surface Cr(1 to 2 nm) was oxidized to Cr³⁺ oxide for surfaces at open circuit and those exposed to potentials < + 1.3 V vs DHE in 0.05 M H₂SO₄ and < + 1.55 V vs. DHE in 85% H₂PO₄. In 0.05 M H₂SO₄ the Cr component was electrooxidized to solube Cr⁶⁺ species at potentials > +1.3 V with the extent of Cr dissolution dependent on initial alloy stoichiometry. Alloys with Cr content 0.5 are capable of producing (dependent on time spent at potentials above +1.3 V in 0.05 M H₂SO₄) very porous Pt-rich surfaces. Loss of Cr was also observed in 85% H₃PO₄ for the alloys with Cr content 0.5, although at the more positive potential limit of +1.55 V. For the Pt_0.2Cr_0.8, treatment in 85% H₃PO₄ at +1.4 V and above led to the appearance of Pt⁴⁺ and Cr⁶⁺ species, apparently stabilized in a porous phosphate overlayer up to 5 nm thick (dependent on time spent at potentials above this limit). The enhancement reported for supported Pt+Cr oxygen cathodes is discussed in the light of these results.     

Kinetics and mechanism of the chromic oxidation of 3-O-methyl-d-glucopyranose

The oxidation of 3-O-methyl-d-glucopyranose (Glc3Me) by Cr^VI in acid medium yields Cr^III, formic acid and 2-O-methyl-d-arabinose as final products when a 50-times or higher excess of Glc3Me over Cr^VI is used. The redox reaction takes place through the combination of Cr^VI → Cr^IV → Cr^II and Cr^VI → Cr^IV → Cr^III pathways. Intermediacy of free radicals and Cr^II in the reaction was demonstrated by the observation of induced polymerization of acrylamide and detection of CrO₂²⁺ formed by reaction of Cr^II with O₂. Intermediate oxo-Cr^V–Glc3Me species were detected by EPR spectroscopy. In 0.3–0.5 mol/L HClO₄, intermediate Cr^V rapidly decompose to the reaction products, while, at pH 5.5–7.5, where the redox processes are very slow, five-coordinate Cr^V bis-chelates of the pyranose and furanose forms of Glc3Me remain more than 15 h in solution. The C1–C2 bond cleavage of Glc3Me upon reaction with Cr^VI distinguishes this derivative from glucose, which is oxidized to gluconic acid.     

A New Route to Crystalline Salts of the Hydrolytic Dimer of Chromium(III)

Crystalline salts of the hydrolytic dimer of Cr(III), [Cr₂(μ-OH)₂(H₂O)₈]X₄·n H₂O (X = p-toluenesulfonate (tos) or mesitylene-2-sulfonate (dmtos)) have been prepared in good yields via a simple two-step procedure: H⁺ oxidation of Cr metal to give Cr²⁺ (T ≈? 70°) followed by O₂ oxidation, of Cr²⁺ to give the dimer (T ≈? 25°). The mechanism of conversion of Cr²⁺ into the dimer is discussed.     

Kinetic studies on the radical polymerization of acrylamide initiated by Mn3+–ethoxyacetic acid redox system

The kinetics of polymerization of acrylamide (AM) initiated by manganese(III) acetate–ethoxyacetic acid (EAA) redox system in aqueous sulphuric acid was investigated in the temperature range 35–45°C. The effects of variations in [monomer], [Mn³⁺], [EAA], [H⁺], and ionic strength on the rates of monomer disappearance (R_p) and Mn³⁺ disappearance (?R_m) were studied. The polymerization process is initiated by the free radical arising from the oxidation of ethoxyacetic acid by Mn³⁺ and terminated by the mutual combination of growing polymer radicals. Based on the kinetic results, a suitable reaction scheme is proposed and the rate expressions are derived. The study on degree of polymerization supports the proposed scheme for polymerization. The various rate and thermodynamic parameters are evaluated.     

Electronic Spectrum and Antiferromagnetic A-B Interactions between Tetrahedral 3d and 3d or 3d Octahedral Cations in Oxidic Lithium Spinels

The compounds chosen to illustrate the interpretation of ligand field spectra of inorganic solids with A-B antiferromagnetic coupling between Fe³⁺ tetrahedral and Fe³⁺ or Cr³⁺ octahedral cations belong to the Li_0.5Fe_xGa_2.5-xO₄ and Li_0.5(FeCr)_xGa_2.5-2xO₄ systems. New features, such as the interpretation of the iron(III) electronic spectrum in ferrimagnetic spinels, the influence of the nature of the superexchange interactions of the pair excitation processes, and the growth of an electronic transition assigned to Cr³⁺ + Fe³⁺ → Cr⁴⁺ + Fe²⁺ intervalence charge transfer at 1.8 eV are reported in this study.