Synthesis of titanium(IV) guanidinate complexes and the formation of titanium carbonitride via low-pressure chemical vapor deposition

The mono(guanidinato) complex [Ti(NMe2)2Cl{i-PrNC[N(SiMe3)2]N-i-Pr}] (1) was prepared by reaction of [Ti(NMe2)2Cl2] with 1 or 2 equiv of the lithium guanidinate salt [Li{i-PrNC[N(SiMe3)2]N-i-Pr}]. Compound 1 has been characterized by X-ray crystallography. Treatment of TiCl4 with 2 equiv of [Li{i-PrNC[N(SiMe3)2]N-i-Pr}] resulted in the formation of dark red crystals. X-ray crystallography showed that these crystals consist of a 70:30 mixture of two bis(guanidinato) complexes, namely, [TiCl2{i-PrNC[N(SiMe3)2]N-i-Pr}{i-PrNC(N=CMe2)N-i-Pr}] (2) and [TiCl2{i-PrNC[N(SiMe3)2]N-i-Pr}{i-PrNC[N(H)-i-Pr]N-i-Pr}] (3). Both compounds 2 and 3 possess a transformed guanidinate ligand. Low-pressure chemical vapor deposition of either compound 1 or [TiCl2{i-PrNC(NMe2)N-i-Pr}] (4) at 600 degrees C results in thin films of titanium carbonitride.     

A new productivity function and stability criterion in chemical vapor transport processes

The crystal growth rate in a chemical vapor transport process using a closed system is analyzed on the basis of a one-dimensional configuration. A simplified model of vapor transport enables one to obtain a set of equations yielding the rates of reaction without a complete evaluation of the partial pressure gradients. This linear set comprises as many equations as independent chemical reactions. The effect of finite interface kinetics is formally taken into account. The efficiency of a one-reaction process is given by a function involving the mole fractions of the gaseous species and the stoichiometric coefficients in the formula equation. The features of such a productivity function are discussed. Maximum growth rate is achieved if the gaseous components are present in stoichiometric quantities. The concept of the productivity function is illustrated by chemical vapor transport systems involving binary and ternary gaseous phases. Proceeding from a two-phase source material, stability criteria that define stable one-phase and stable two-phase crystal growth are given. The kind of deposit may be changed by altering the amount of transporting agent. It is shown that limited interface kinetics favors a two-phase deposit.     

Phototransformation studies of halo-substituted cinnamates by Raman spectrometry and quantum-chemical computations

The comprehension of the cinnamic derivative phototransformation mechanisms is particularly important when these molecules are used as addressable photosensitive layers. In this work we show that the halo-substituted cinnamate sensitivity to the phototransformation is a function of the excitation wavelength and the substituent nature and position. With this intention, we underline the existence of various isomers and rotatomers by Raman spectroscopy and we assign the observed vibrational modes with the help of quantum-chemical calculations. These various aspects of our work clarify the relative roles of the steric, inductive and mesomeric effects according to the considered substitution.     

Atomistic simulation of the formation of nanoporous silica films via molecular chemical vapor deposition on nonporous substrates

To distinguish thin deposited film characteristics clearly from the influence of substrate morphological properties, the growth mechanism and the macroscale and nanoscale properties of nanoporous SiO(2) films deposited on nonporous silica (SiO(2)) substrates from chemical precursors Si(OH)(4) and TEOS (tetraethoxysilane) via low-pressure chemical vapor deposition are the primary targets of this study. This work employs a kinetic Monte Carlo (KMC) simulation method coupled to the Metropolis Monte Carlo method to relax the strained silica structure. The influence of the deposition temperature (473, 673, and 873 K) on the properties of the SiO(x) layers is addressed via analysis of the film growth rates, density profiles of the deposited thin films, pore size distributions, carbon depth profiles (with respect to TEOS), and voidage analysis for layers of different thicknesses (8-18 nm). A comparison of simulation with experimental results is also carried out.     

Quantum chemical studies of FT-IR and Raman spectra of methyl 2,5-dichlorobenzoate

In this paper, experimental and theoretical studies on the molecular structure and vibrational spectra of methyl 2,5-dichlorobenzoate (MDCB) are presented. Fourier transform infrared and Raman spectra of the title molecule in the solid phase were recorded and analyzed. The geometrical parameters were calculated using DFT (B3LYP) with 6-311G(d,p) and 6-311++G(d,p) basis sets, and compared with the experimental data. The vibrational frequencies, infrared intensities and Raman scattering activities were also reported. The detailed assignments were given based on the total energy distribution of the vibrational modes, calculated with scaled quantum mechanics method. The observed and calculated frequencies are found to be in good agreement.     

Doping of C60 fullerene peapods with lithium vapor: Raman spectroscopic and spectroelectrochemical studies

Raman spectroscopy and in situ Raman spectroelectrochemistry have been applied to the study of the lithium vapor doping of C60@SWCNTs (peapods; SWCNT=single-walled carbon nanotube). A strong degree of doping was proven by the disappearance of the radial breathing mode (RBM) of the SWCNTs and by the attenuation of the tangential (TG) band intensity by two orders of magnitude. The lithium doping causes a downshift of the Ag(2) mode of the intratubular C60 by 27 cm(-1) and changes the resonance condition of the encapsulated fullerene. In contrast to potassium vapor doping, the strong downshift of the TG band was not observed for lithium doping. The peapods treated with lithium vapor remained partially doped even when they were exposed to humid air. This was reflected by a reduction in the intensity of the nanotube and the fullerene modes and by the change in the shape of the RBM band compared with that of the undoped sample. The Ag(2) mode of the intratubular fullerene was not resolved after contact of the lithium-doped sample with water. Lithium insertion into the interior of a peapod and its strong interaction with the intratubular fullerene is suggested to be responsible for the air-insensitive residual doping. This residual doping was confirmed by in situ spectroelectrochemical measurements. The TG band of the lithium-doped peapods did not undergo an upshift during the anodic doping, which points to the formation of a stable exohedral metallofullerene peapod.     

Synthesis, characterization and gas permeation properties of a silica membrane prepared by high-pressure chemical vapor deposition

Cylindrical silica membranes with dead-end structure were prepared by an extended counter-diffusion chemical vapor deposition (CVD) method, in which a tetramethylorthosilicate (TMOS) silica source was fed from the outside of a cylindrical membrane support with γ-alumina interlayer (the membrane side), and oxygen gas was fed from the inside (the support side). Extended counter-diffusion CVD is a method of depositing silica films under highly pressurized conditions applied to the membrane side where TMOS is supplied. Two silica membranes were deposited for 10 h at 573 K under differential pressures of 0.1 MPa and 0.0 MPa applied between the cylindrical membranes. The hydrogen permeances for these silica membranes were unaffected (5 × 10⁻⁸ mol m⁻² s⁻¹ Pa⁻¹ at 573 K), although the methane and carbon dioxide permeances were greatly reduced for dense silica films prepared by high-pressure CVD (HPCVD). Therefore, the selectivity of hydrogen over methane and carbon dioxide was 24,000, and 1200, respectively. It is suggested from energy dispersive X-ray microanalysis (EDX) observations in scanning electron microscopy (SEM) and scanning probe microscopy (SPM) results that this high selectivity was due to the reduced number of defects and/or pinholes formed in the dense silica membranes by HPCVD.     

Improved method for kinetic studies in microreactors using flow manipulation and noninvasive Raman spectrometry

A novel method has been devised to derive kinetic information about reactions in microfluidic systems. Advantages have been demonstrated over conventional procedures for a Knoevenagel condensation reaction in terms of the time required to obtain the data (fivefold reduction) and the efficient use of reagents (tenfold reduction). The procedure is based on a step change from a low (e.g., 0.6 μL min(-1)) to a high (e.g., 14 μL min(-1)) flow rate and real-time noninvasive Raman measurements at the end of the flow line, which allows location-specific information to be obtained without the need to move the measurement probe along the microreactor channel. To validate the method, values of the effective reaction order n were obtained employing two different experimental methodologies. Using these values of n, rate constants k were calculated and compared. The values of k derived from the proposed method at 10 and 40 °C were 0.0356 ± 0.0008 mol(-0.3) dm(0.9) s(-1) (n = 1.3) and 0.24 ± 0.018 mol(-0.1) dm(0.3) s(-1) (n = 1.1), respectively, whereas the values obtained using a more laborious conventional methodology were 0.0335 ± 0.0032 mol(-0.4) dm(1.2) s(-1) (n = 1.4) at 10 °C and 0.244 ± 0.032 mol(-0.3) dm(0.9) s(-1) (n = 1.3) at 40 °C. The new approach is not limited to analysis by Raman spectrometry and can be used with different techniques that can be incorporated into the end of the flow path to provide rapid measurements.     

Characterization of the chemical interaction between single-walled carbon nanotubes and titanium dioxide nanoparticles by thermogravimetric analyses and resonance Raman spectroscopy

Raman spectroscopy is a powerful technique that is used to characterize or observe alterations in the structure or properties of carbon nanotubes and its composites. This method can provide information about electronic changes or quantify them. We used Raman spectroscopy to study the chemical and electronic changes in a composite formed by titanium dioxide nanoparticles and single-walled carbon nanotubes. This composite was characterized by scanning electron microscopy to investigate the morphology and by thermogravimetric analyses to assess the thermal stability of the isolated carbon nanotubes as compared with the nanotubes by titanium dioxide nanoparticles. The Raman results showed that the modification of the nanotubes with the TiO₂ nanoparticles generates a new material with different structure of the nanotubes, resulting in a decrease in defects. The charge transfer from the TiO₂ nanoparticles to the nanotubes alters the electronic properties of both moieties in the hybrid material. The interaction between the nanotubes and nanoparticles decreases the CC bound order of the nanotubes and decreases their thermal stability.     

Interference of nitrite and nitrogen dioxide on mercury and selenium determination by chemical vapor generation atomic absorption spectrometry

In this study, a systematic investigation was performed concerning the interference of nitrogen oxides on the determination of selenium and mercury by hydride generation atomic absorption spectrometry (HG AAS) and cold vapor atomic absorption spectrometry (CV AAS). The effect of nitrate, nitrite and NO₂ dissolved in the condensed phase was evaluated. No effect of NO₃⁻ on Se and Hg determination was observed up to 100 mg of sodium nitrate added to the reaction vessel. The Se signal was reduced by about 80% upon the addition of 6.8 mg NO₂⁻. For Hg, no interference of nitrite was observed up to 20 mg of NO₂⁻. A complete suppression of the Se signal was observed when gaseous NO₂ was introduced into analytical solutions. For Hg, a signal decrease between 8 and 13% occurred. For Se, bubbling argon or heating the solution was not able to recover the original absorbance values, whereas Hg signals were recovered with these procedures. When gaseous NO₂ was passed directly into the atomizer, Se signals decreased similarly to when NO₂ was bubbled in analytical solutions. The addition of urea, hydroxylamine hydrochloride and sulfamic acid (SA) was investigated to reduce the NO₂ effect in sample digests containing residual NO₂, but only SA was effective in reducing the interference. Based on the results, it is possible to propose the use of SA to prevent interferences in Se and Hg determinations by HG AAS and CV AAS, respectively.     

Influence of the pore structure of MCM-41 and SBA-15 silica fibers on atomic layer chemical vapor deposition of cobalt carbonyl

Mesoporous high surface area MCM-41 and SBA-15 type silica materials with fibrous morphology were synthesized and used as support materials for the ALCVD (atomic layer chemical vapor deposition) preparation of Co/MCM-41 and Co/SBA-15 catalysts. Co/MCM-41 and Co/SBA-15 catalysts were prepared by deposition of Co2(CO)8 from the gas phase onto the surfaces of preheated support materials in a fluidized bed reactor. For both silica materials, two different kinds of preparation methods, direct deposition and a pulse deposition method, were used. Pure silica supports as well as supported cobalt catalysts were characterized by various spectroscopic (IR) and analytical (X-ray diffraction, Brunauer-Emmett-Teller, elemental analysis) methods. MCM-41 and SBA-15 fibers showed considerable ability to adsorb Co2(CO)8 from the gas phase. For MCM-41 and SBA-15 silicas, cobalt loadings of 13.7 and 12.1 wt % were obtained using the direct deposition method. The cobalt loadings increased to 23.0 and 20.7 wt % for MCM-41 and SBA-15 silicas, respectively, when the pulse deposition method was used. The reduction behavior of silica-supported cobalt catalysts was found to depend on the catalyst preparation method and on the mesoporous structure of the support material. Almost identical reduction properties of SBA-15-supported catalysts prepared by different deposition methods are explained by the structural properties of the mesoporous support and, in particular, by the chemical structure of the inner surfaces and walls of the mesopores. Pulse O2/H2 chemisorption experiments showed catalytically promising redox properties and surface stability of the prepared MCM-41- and SBA-15-supported cobalt catalysts.     

Sensitivity enhancement using nanometer silica particles on the surface of a quartz cell in mercury and selenium determination by vapor generation atomic absorption spectrometry

The sensitivity of on-line vapor generation atomic absorption spectrometry of mercury and selenium was improved by using a new atom trap technology. The inner wall of a T-shaped quartz tube was coated with nanometer SiO₂ so increase the residence time of the analyte atoms in the light path. The linear range of the calibration plots thus was increased to a range from 5.0 to 150 ng mL^?1 for mercury, and from 4.5 to 100 ng mL^?1 for selenium. The detection limits are 0.9 ng mL^?1 for Hg and 1.0 ng mL^?1 for Se which is a 2-fold improvement. The technique was applied to the determination of Hg and Se in herbs and hair.     

Kinetic studies on the mechanism of atomization in electrothermal atomic absorption spectrometry with and without chemical modifiers

Over the past decade a few methods for determining kinetic data for atom formation from the absorption signal in electrothermal atomic absorption spectrometry (ETAAS) have been developed in the author’s laboratory. These approaches include improvement to the Smets method, and development of new methods for simultaneous determination of kinetic order and activation energy for atom formation at increasing or constant temperatures. The steady-state approximation and first-order kinetic assumption for atom formation have been avoided during their derivation. One of the most distinct features of these new methods is their suitability for quantitative determination of the kinetic order for atom formation from absorption signals under normal analytical conditions, even for atomization processes with fractional reaction orders and/or with multiple mechanisms. The application of the developed methods to the study of the mechanism of atomization in the graphite-furnace atomizer, with and without chemical modifiers, is reviewed with emphasis on research work in the authors’ laboratory.     

Kinetic studies on the mechanism of atomization in electrothermal atomic absorption spectrometry with and without chemical modifiers

Over the past decade a few methods for determining kinetic data for atom formation from the absorption signal in electrothermal atomic absorption spectrometry (ETAAS) have been developed in the author's laboratory. These approaches include improvement to the Smets method, and development of new methods for simultaneous determination of kinetic order and activation energy for atom formation at increasing or constant temperatures. The steady-state approximation and first-order kinetic assumption for atom formation have been avoided during their derivation. One of the most distinct features of these new methods is their suitability for quantitative determination of the kinetic order for atom formation from absorption signals under normal analytical conditions, even for atomization processes with fractional reaction orders and/or with multiple mechanisms. The application of the developed methods to the study of the mechanism of atomization in the graphite-furnace atomizer, with and without chemical modifiers, is reviewed with emphasis on research work in the authors' laboratory.     

Thermodynamics and kinetics of initial gas phase reactions in chemical vapor deposition of titanium nitride. Theoretical study of TiCl4 ammonolysis

Thermodynamic equilibrium and kinetics of the gas‐phase reaction between TiCl₄ and NH₃ have been studied computationally using results from recent quantum mechanical calculations of titanium tetrachloride ammonolysis. 1 These calculations were based upon the transition state theory for the direct reactions and RRKM theory for the reactions proceeding via intermediate complex. Rate constants for the barrierless reactions were expressed through the thermodynamic characteristics of the reagents and products using a semiempirical variational method. The kinetic simulation of the gas‐phase steps of CVD was performed within a model of a well‐stirred reactor at temperatures 300–1200 K and residence times between 0.1–2 s. At temperatures below 450 K formation of donor–acceptor complexes between TiCl₄ and NH₃ is the dominating process. At higher temperatures sequential direct ammonolysis takes place. At typical LPCVD conditions the only product of the first step of ammonolysis, TiCl₃NH₂, is formed in substantial amount. © 2001 John Wiley & Sons, Inc. J Comput Chem 22: 1366–1376, 2001     

Non-chromatographic speciation analysis of mercury by flow injection on-line preconcentration in combination with chemical vapor generation atomic fluorescence spectrometry

A novel non-chromatographic approach for direct speciation of mercury, based on the selective retention inorganic mercury and methylmercury on the inner wall of a knotted reactor by using ammonium diethyl dithiophosphate and dithizone as complexing agents respectively, was developed for flow injection on-line sorption preconcentration coupled with chemical vapor generation non-dispersive atomic fluorescence spectrometry. With the sample pH kept at 2.0, the preconcentration of inorganic mercury on the inner walls of the knotted reactor was carried out based on the exclusive retention of Hg–DDP complex in the presence of methylmercury via on-line merging the sample solution with ammonium diethyl dithiophosphate solution, and selective preconcentration methylmercury was achieved with dithizone instead of ammonium diethyl dithiophosphate. A 15% (v/v) HCl was introduced to elute the retained mercury species and merge with KBH₄ solution for atomic fluorescence spectrometry detection. Under the optimal experimental conditions, the sample throughputs of inorganic mercury and methylmercury were 30 and 20 h^− 1 with the enhancement factors of 13 and 24. The detection limits were found to be 3.6 ng l^− 1 for Hg²⁺ and 2.0 ng l^− 1 for CH₃Hg⁺. The precisions (RSD) for the 11 replicate measurements of each 0.2 μg l^− 1 of Hg²⁺ and CH₃Hg⁺ were 2.2% and 2.8%, respectively. The developed method was validated by the analysis of certified reference materials (simulated natural water, rice flour and pork) and by recovery measurements on spiked samples, and was applied to the determination of inorganic mercury and methylmercury in biological and environmental water samples.     

Determination of gold by nanometer titanium dioxide immobilized on silica gel packed microcolumn and flame atomic absorption spectrometry in geological and water samples

A new method has been developed for the determination of gold based on separation and preconcentration with a microcolumn packed with nanometer TiO₂ immobilized on silica gel (immobilized nanometer TiO₂) prior to its determination by flame atomic absorption spectrometry. The optimum experimental parameters for preconcentration of gold, such as pH of the sample, sample flow rate and volume, eluent and interfering ions, have been investigated. Gold could be quantitatively retained by immobilized nanometer TiO₂ in the pH range of 8-10, then eluted completely with 0.1 mol L⁻¹ HNO₃. The detection limit of this method for Au was 0.21 ng mL⁻¹ with an enrichment factor of 50, and the relative standard deviation (R.S.D.) was 1.8% at the 100 ng mL⁻¹ Au level. The method has been applied for the determination of trace amounts of Au in geological and water samples with satisfactory results.     

化学蒸气发生-四通道原子荧光光谱法同时测定高纯金中的痕量As,Sb,Bi,Te

采用化学蒸气发生-四通道原子荧光光谱法测定了高纯金中的痕量砷、锑、铋和碲。用乙酸乙脂萃取分离金,水相还原后采用化学蒸气发生-四通道原子荧光光谱法测定高纯金中的痕量砷、锑、铋和碲。在最佳条件下,方法对As,Sb,Bi,Te的检出限分别为0.04,0.05,0.04,0.03 ng/mL(3σ);测定精密度分别为0.98,0.89,0.94,0.99%(对10 ng/mL As,Sb,Bi和Te混合标准,n=7)。方法对实际样品中的As,Sb,Bi,Te进行了同时测定,测定结果与标准方法无明显差异,各元素的加标回收率为95%～105%。     

化学蒸气发生-四通道原子荧光光谱法同时测定水样中的痕量砷、锑、硒和汞

应用自行设计的化学蒸气发生-四通道无色散原子荧光光谱仪,建立了同时测定水样中As、Sb、Se、Hg的新方法.在实验中优化了四元素同时化学蒸气发生条件和测定的最佳工作参数.在样品预处理阶段用HCl将Se6+还原为Se4+,然后用质量浓度5 g/L硫脲将As5+和Sb5+还原为As3+和Sb3+.在最佳条件下,方法对As、Sb、Se、Hg的检出限分别为0.05、0.03、0.05、0.01 ng/mL(3d);RSD分别为0.42%、0.74%、0.97%、1.0%(对5 ng/mL As、Sb、Se和0.5ng/mL Hg混合标准,n=7).用所建立的方法对不同类型水样中的As、Sb、Se、Hg进行了同时测定,测定结果与用标准方法测定所得结果之间无明显差异,各元素的加标回收率在93%～105%.     

Anisotropy shift and Raman bandwidth studies in carbonyl containing molecule o-chlorobenzaldehyde: role of repulsive forces

The analysis of Raman anisotropy shift as a function of solvent concentration shows the weakening of pair interaction of the molecules due to the influence of solvent-induced perturbations. The present study deals with the effect of dielectric constant of the medium on the non-coincidence effect (anisotropy shift) and the role of van der Waals' volume on the anisotropic Raman bandwidth. The CO stretching vibration of o-chlorobenzaldehyde (OCBD) molecule was studied in various polar and non-polar solvents namely CCl4, CH3CN, C6H5Cl and CH3C6H5. The data on anisotropic bandwidth are interpreted using the van der Waals' volume within the framework of lineshape theory of Bratos and Tarjus, while the Onsager-Fr?hlich model on non-coincidence effect has been tested. Our study shows that the repulsive potential of the type e-alphaR is playing an important role in the OCBD-solvent interactions. The vanishing of anisotropy shift (non-coincidence effect) on dilution may be explained on the basis of repulsive forces playing a significant role in solute-solvent interactions.