Functionalised linear and cross-linked polystyrenes from chloromethylated polymers through their organolithium derivatives

The lithiation of soluble (linear) and insoluble (cross-linked) chloromethylated polystyrene (1 and 15, respectively) with lithium and a catalytic amount of 4,4′-di-tert-butylbiphenyl (DTBB, 10 mol%) followed by reaction with different electrophiles leads to the formation, after final hydrolysis, of the corresponding functionalised polymers 2-12 and 16-32, respectively.     

Surface energies of linear and cross-linked polymers based on isobornyl methacrylate and methacryl-heptaisobutyl POSS

The use of monofunctional polyhedral oligomeric silsesquioxanes (POSS) as polymer modifiers requires controlling the phase separation process producing POSS-rich and polymer-rich domains that occurs in most systems due to the thermodynamic incompatibility between both components. One significant result of this study is the finding that isobornyl methacrylate (IBoMA) is an excellent reactive solvent of a commercial methacryl-heptaisobutyl POSS (MA-POSS). Formulations containing up to 30 wt% MA-POSS in IBoMA or in IBoMA (95 parts by weight)-diethylene glycol dimethacrylate (DEGDMA, 5 parts by weight), were polymerized using benzoyl peroxide as initiator up to complete conversion of CC bonds (determined by FTIR). Transparent POSS-modified materials were obtained without any evidence of a macroscopic phase separation. POSS addition produced a decrease of the glass transition temperature and the glassy and rubbery elastic modulus. A significant decrease in surface energy for both linear and cross-linked polymers was observed. This effect was particularly important for cross-linked polymers where the addition of 30 wt% POSS decreased the surface energy from about 29 mN m⁻¹ to 16 mN m⁻¹, a very low value for hydrocarbon materials. This study opens a way to obtain hydrophobic methacrylic coatings without the use of fluorinated monomers.     

Group transfer polymerization in the bulk: linear polymers and randomly cross-linked networks

Linear homopolymers and randomly cross-linked homopolymer networks of 2-(dimethylamino)ethyl methacrylate of various molecular weights (MWs) were synthesized by group transfer polymerization in the bulk. 1-methoxy-1-(trimethylsiloxy)-2-methyl propene was used as the initiator, while tetrabutylammonium bibenzoate served as the catalyst. Ethylene glycol dimethacrylate was the cross-linker used for the network synthesis at an 8-fold molar excess with respect to the initiator. Gel permeation chromatography in tetrahydrofuran was used to characterize the linear homopolymers in terms of their MW and molecular weight distribution (MWD). Although the experimental MWs did not match the theoretical MWs, they were reasonably close to them. The MWDs were rather broad with polydispersity indices ranging between 1.5 and 1.9. The monomer conversion was relatively high, ranging from 97% to 74% for theoretical degrees of polymerization (DPs) from 5 to 500. No polymerization was observed for an attempted DP of 1000. Networks with molar ratios of monomer to initiator (nominal DPs) from 5 to 200 were prepared, while an attempted synthesis with a nominal DP of 500 did not yield a network. The networks were characterized in terms of their degree of swelling in water and the effects of DP, pH, salt concentration and temperature were investigated.     

Synthesis and esterolytic activity of catalytic peptide dendrimers

Peptide dendrimers were prepared by solid-phase peptide synthesis. Monomeric dendrimers were first obtained by assembly of a hexapeptide sequence containing alternate standard alpha-amino acids with diamino acids as branching units. The monomeric dendrimers were then dimerized by disulfide-bridge formation at the core cysteine. The synthetic strategy is compatible with functional amino acids and different diamino acid branching units. Peptide dendrimers composed of the catalytic triad amino acids histidine, aspartate, and serine catalyzed the hydrolysis of N-methylquinolinium salts when the histidine residues were placed at the outermost position. The dendrimer-catalyzed hydrolysis of 7-isobutyryl-N-methylquinolinium followed saturation kinetics with a rate constant of catalysis/rate constant without catalysis (k(cat)/k(uncat)) value of 3350 and a rate constant of catalysis/Michaelis constant (k(cat)/K(M)) value 350-fold larger than the second-order rate constant of the 4-methylimidazole-catalyzed reaction; this corresponds to a 40-fold rate enhancement per histidine side chain. Catalysis can be attributed to the presence of histidine residues at the surface of the dendrimers.     

Synthesis and biological evaluation of novel imidazole-containing macrocycles

A new family of compounds made of a 5-aryl-1H-imidazole motif included in a macrocycle has been designed and synthesized. The synthesis of the imidazole core makes use of our previously developed method for the regioselective preparation of 1,2,5-trisubstituted imidazoles while the construction of the macrocycle is based on a three steps sequence: S_NAr, Suzuki coupling, and RCM reaction. Biological evaluation of synthesized imidazole-containing macrocycles revealed that they display actual binding activity toward A₃ adenosine (h) receptor, dopamine D₁ (h) receptor, chloride channel (GABA-gated), and choline transporter (h) CHT1.     

Synthesis and reactions of cysteine‐based telechelic polymers

The radical polyaddition of N‐4‐vinylbenzoyl‐L ‐cysteine methyl ester (VCM) was carried out in the presence of 2,2′‐azobisisobutyronitrile (AIBN, 3 mol %) as an initiator in dimethyl formamide (DMF) with monomer concentrations of 0.5 and 1.0 M at 60 °C for 20 h under nitrogen atmosphere to afford the corresponding polymers [poly(VCM), PVCM] with number‐average molecular weights (M_n)'s of 5300 and 18,000 in 92 and 95% yields, respectively. The obtained polymers had a heterotelechelic structure with thiol and olefin end moieties. The radical polymerization of methyl methacrylate and trityl methacrylate was carried out in the presence of PVCM with AIBN (3 mol %) as an initiator in DMF at 60 °C for 20 h to afford the block copolymers with M_n values in the range of 13,000–26,800 in good yields. PVCM [M_n = 18,000; polydispersity (M_w/M_n) = 1.56] was treated with 4 equiv of NaOH aq. (1.0 M) to afford the polymer having carboxyl groups in the side chain with a M_n of 17,300 and M_w/M_n of 1.88 in 95% yield and was also oxidized to polysulfoxide and polysulfone with 4 equiv of H₂O₂ per sulfide unit in CH₂Cl₂ (1.0 M) for 20 h. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 23–31, 2001     

Synthesis and properties of polycondensation polymers from compounds with asymmetric functional groups

The effect of conditions of polycondensation on the structure of polymers formed from monomers with symmetric and asymmetric functional groups by nonequilibrium polycondensation has been studied for the system with acceptor-catalytic polyesterification of β-hydroxyethyl ethers of bisphenols and terephthalic acid chloride in the presence of triethylamine. Polymers with statistical or regular arrangement of diol residues in the chain can be produced in such systems, depending on the way in which starting compounds are introduced in the reactor. A difference in the reactivity of functional groups in an asymmetric monomer is not sufficient to produce polycondensation polymers with a regular structure. Gradual introduction of the symmetric monomer is essential to yield polymers with predominant “head-to-head” (“tail-to-tail”) configurations. Some properties of the resulting polymers have been studied. Polymers with ordered residues of the asymmetric monomers in the macromolecules have higher softening temperatures and an increased tendency for crystallization than the statistic polymers.     

Synthesis of asymmetric iron-pybox complexes and their application to aziridine forming reactions

The synthesis of a series of iron-pybox complexes and their employment in the catalytic asymmetric aziridine forming reaction is presented. When AgSbF₆ is used as an initiator, the i-pr- and t-bu-pybox complexes produce 47% of the cis-aziridine in moderate ee’s with the bulk of side products consisting of the trans-isomer and β-amino-α,β-unsaturated esters (AUE’s).     

Synthesis,characterization and cleavage of linear polymers attached to silica nanoparticles formed using thiol‐acrylate conjugate addition reactions

This study investigates the formation of linear polymer grafts using thiol‐acrylate conjugate addition reactions on nanoparticle surfaces. Silica nanoparticles were first modified with an amine functionality, followed by the attachment of a photocleavable acrylate. Dithiol‐diacrylate films were attached to the particles through the surface acrylate groups at various stoichiometric ratios of thiol to acrylate by conducting amine‐catalyzed conjugate addition polymerizations. The particles were then exposed to UV light to release the grafted polymer by photocleavage. The cleaved, grafted polymers were analyzed using infrared spectroscopy and gel permeation chromatography and compared to polymers formed in the bulk, which remained unattached to the particles. The measured number and weight average molecular weights were similar for both polymer types within experimental error and increased from 2000 to 5000 g/mol and 4000 to 10,000 g/mol, respectively, as the ratio of limiting to excess functionality increased from 0.8 to 1. Both number and weight average molecular weights followed the trend of step growth polymers with the highest molecular weight achieved for stoichiometric monomeric mixtures. Surface coverage of the nanoparticles was estimated using the molecular weight and thermogravimetric data and was found to be uniform (～0.15 chains/nm²) irrespective of the stoichiometry of the reacting monomers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6896–6906, 2008     

Multimonomer and cross-linked polymers formed by its copolymerization

Differential scanning calorimetry (DSC) and thermogravimetry (TG) were used to examine the thermal behavior of the multimonomer poly[2-(10-undecenoyloxy)ethyl methacrylate] (PUDEM) within the temperature range from -80 to 400°C. DSC measurements indicated that the polymer side chains were able to crystallize in paraffinic phase. PUDEM, added to methyl methacrylate (MM), can effectively copolymerize with essentially no homopolymer produced as shown by DSC (single T _g). The value of T _g depends on the PUDEM content, degree of cross-linking and the presence of free MM in the cross-linked product. This revised version was published online in August 2006 with corrections to the Cover Date.     

Synthesis and crystal structures of two nickel coordination polymers generated from asymmetric malate ligand

Two nickel coordination polymers [Ni(H₂O)(C₄H₄O₅)]·H₂O 1 and [Ni(H₂O)(mal)(phen)] 2, have been hydrothermally synthesized and structurally characterized by single crystal X-ray diffraction. Crystal data for 1: C₄H₈O₇Ni, monoclinic Cc, , , , , Z=4. Crystal data for 2: C₁₆H₁₄N₂O₆Ni, orthorhombic Pna2₁, , , , Z=4. Compound 1 is constructed from [Ni(H₂O)(C₄H₄O₅)] sheets pillared through β-carboxylate groups into a 3D framework, which exhibits a diamond-like network. Compound 2 exhibits a 3D supramolecular network. To our knowledge, compound 1 represents the first diamond-like topology in the system of metal-malate. Other characterizations by elemental analysis, IR and TG are also described. The magnetic behavior of compound 1 has been studied.     

Synthesis and characterization of polymers containing linear sugar moieties as side groups

The synthesis of a water-soluble monomer, namely 4-vinylphenyl-d-gluco(d-manno)hexitol (4) derived from d-gluconolactone, is here presented. The homopolymerization of the vinylsugar has been conducted in both aqueous and organic media using free-radical initiators. High-molar-mass water-soluble polymers are obtained. The copolymerization behavior of the vinylphenyl sugar monomer with a hydrophilic monomer such as acrylamide, as well as with a hydrophobic monomer such as styrene, has been investigated. Statistical- and block-type copolymers have thus been prepared. The structures of the polymers were confirmed by NMR and their thermal properties examined by DSC.     

Sorption and exclusion of polar solutes on cross-linked polymers

Summary The interstitial volume in ion-exchange columns packed with beads of gel-type is a well defined quantity. The retention volumes of dextran and high relative molecular mass polyethylene glycols are identical. For macroreticular resins and cross linked polyvinylpyrrolidone the retention volume depends on the structure and relative molecular mass of the polymer indicating that no strict borderline exists between the resin phase and the mobile phase.     

Synthesis of novel diastereomeric diphosphine ligands and their applications in asymmetric hydrogenation reactions

[structure: see text] Diastereomeric biaryl diphosphine ligands 10 and 11 with added chiral centers on the backbone were synthesized. Substrate-directed asymmetric synthesis occurred in the coupling step of the preparation of the diastereomeric diphosphine oxides. The diastereomeric diphosphine oxides were easily separated by column chromatography with silica gel. Ruthenium catalysts containing these ligands were highly effective in the hydrogenation of 2-(6'-methoxy-2'-naphthyl)propenoic acid and beta-ketoesters. The additional chiral centers had a significant influence on the enantioselectivity and activity of the catalysts.     

Synthesis of main-chain chiral quaternary ammonium polymers for asymmetric catalysis using quaternization polymerization

Main-chain chiral quaternary ammonium polymers were successfully synthesized by the quaternization polymerization of cinchonidine dimer with dihalides. The polymerization occurred smoothly under optimized conditions to give novel type of main-chain chiral quaternary ammonium polymers. The catalytic activity of the polymeric chiral organocatalysts was investigated on the asymmetric benzylation of N-(diphenylmethylidene)glycine tert-butyl ester.     

Highly stable and porous cross-linked polymers for efficient photocatalysis

Porous cross-linked polymers (PCPs) with phosphorescent [Ru(bpy)(3)](2+) and [Ir(ppy)(2)(bpy)](+) building blocks were obtained via octacarbonyldicobalt (Co(2)(CO)(8))-catalyzed alkyne trimerization reactions. The resultant Ru- and Ir-PCPs exhibited high porosity with specific surface areas of 1348 and 1547 m(2)/g, respectively. They are thermally stable at up to 350 °C in air and do not dissolve or decompose in all solvents tested, including concentrated hydrochloric acid. The photoactive PCPs were shown to be highly effective, recyclable, and reusable heterogeneous photocatalysts for aza-Henry reactions, α-arylation of bromomalonate, and oxyamination of an aldehyde, with catalytic activities comparable to those of the homogeneous [Ru(bpy)(3)](2+) and [Ir(ppy)(2)(bpy)](+) photocatalysts. This work highlights the potential of developing photoactive PCPs as highly stable, molecularly tunable, and recyclable and reusable heterogeneous photocatalysts for a variety of important organic transformations.     

Synthesis of chiral polymers containing thioetherified cinchonidinium repeating units and their application to asymmetric catalysis

A thiol-ene reaction of dithiol and two equivalents of cinchonidine afforded a thioetherified cinchonidine dimer. The dimer was treated with benzyl bromide to give a quaternary ammonium dimer. An ion exchange reaction of the cinchonidinium dimer and disodium disulfonate gave polymers containing chiral quaternary ammonium repeating units in their main-chain structures. Another type of chiral polymer was synthesized by quaternization polymerization. Repeated quaternization reactions between the thioetherified cinchonidine dimer and dihalides yielded chiral polymers containing cinchonidinium structures in their main chains. Both of these chiral polymers were successfully used as catalysts for the asymmetric alkylation of N-diphenylmethylene glycine tert-butyl ester. The chiral cinchonidinium polymers explored in this study showed excellent catalytic activity in asymmetric alkylation reactions and were reused several times without loss of activity.     

Controlling capture and release of guests from cross-linked supramolecular polymers

[reaction: see text]. Formation of a cross-linked, porous supramolecular polymer leads to instant entrapment of organic guest species. These can be stored and then released upon changing solvent polarity, temperature, pH, and concentration.