Polymerization of 1-methoxy-1-ethynylcyclohexane by transition metal catalysts

The polymerization of 1-methoxy-1-ethynylcyclohexane (MEC) was carried out by various transition metal catalysts. The catalysts MoCl₅, MoCl₄, and WCl₆ gave a relatively low yield of polymer (≤ 16%). The catalytic activity of Mo-based chloride catalyst was greater than that of W-based chloride catalyst. However, catalyst tungsten carbene complex (I) gave a larger molar mass and higher yield in the presence of a Lewis acid such as AlCl₃ than in the absence of a Lewis acid. The activity of the tungsten carbene complex was obviously affected by Lewis acidity. The catalyst PdCl₂ was a very effective catalyst for the present polymerization and gave polymers in a high yield. The structure of the resulting poly(MEC) was identified by various instrumental methods as a conjugated polyene structure having an α-methoxycyclohexyl substituent. The poly(MEC)s were mostly light-brown powders and completely soluble in various organic solvents such as tetrahydrofuran (THF), chloroform (CHCl₃), ethylacetate, n-butylacetate, dimethylformamide, benzene, xylene, dimethylacetamide, 1,4-dioxane, pyridine, and 1-methyl-2-pyrrolidinone. Thermogravimetric analysis showed that the polymer started to lose mass at 125°C and that maximum decomposition occurred at 418°C. The x-ray diffraction diagram shows that poly(MEC) has an amorphous structure. © 1997 John Wiley & Sons, Inc.     

Polymerization of acenaphthylene by transition metal catalysts

The polymerization of acenaphthylene (ACN) was examined in the presence of the group V and VI transition metal salts such as WCl₆, MoCl₅, TaCl₅, and NbCl₅, as catalysts under various reaction conditions. These transition metal salts were found to be effective catalysts for the polymerization of ACN. The polymerization of ACN by WCl₆ in chlorobenzene proceeded at a high initial rate when the monomer to catalyst mole ratio was 200. In addition, it was observed that aromatic solvents generally were found to be superior to aliphatic solvents for both conversion and molecular weight. The structure of the resulting polymers was characterized by means of NMR, IR, UV, and x-ray diffraction. Emission properties were also investigated. Fluorescence emission spectra of the polymers obtained by WCl₆ as a catalyst varied strongly depending on the polymerization solvent. Thus, it appears that the polyacenaphthylene produced by WCl₆ was a different configuration dependent on the polymerization solvents used.     

Polymerization of 1-aryl-2-trimethylsilylacetylenes by transition metal catalysts(II)

Polymerization of 1-aryl-2-trimethylsilylacetylene (aryl = thienyl, furyl, and pyridyl) was carried out by transition metal catalysts. The polymer yield was generally low due to the steric hindrance. R₄Sn (R = Me, n-Bu, Ph) exhibits some cocatalytic activities with respect to polymer yield and molecular weight. On the other hand, the polymerization was decelerated when organoaluminum compounds were used as cocatalysts. The polymer yield increased in the following order: phenyl > thienyl > furyl > pyridyl, according to the aryl substituents. The NMR (¹H- and ¹³C-), IR, and UV-visible spectra indicated that the resulting polymers have a linear conjugated polyene structure each containing the aromatic substituent and trimethylsilyl group. From ¹H-NMR integration, it was found that the resulting polymers are partially desilylated depending on the substituents of monomer and the polymerization conditions. The solubility behavior, stability and fluoride-ion induced desilylation reaction of the polymers were also studied.     

Polymerization of propargylamine and 1,1-diethylpropargylamine by transition metal catalysts

Some polyacetylene derivatives containing an amine functional group were prepared by the polymerization of propargylamine (PA) and 1,1-diethylpropargylamine (DEPA) with various transition metal catalysts. In the polymerization of PA, Mo-based catalysts were more effective than that of W-based catalysts, and organoaluminum compounds, especially EtAlCl₂, were found to be very effective cocatalysts. In the polymerization of DEPA, Mo-and W-based catalyst systems showed a similar catalytic activity. The polymerization easily proceeded in polar solvents such as nitrobenzene and DMF as well as nonpolar aromatic solvents such as chlorobenzene, toluene, etc. The resulting poly(PA) and poly(DEPA) were insoluble in organic solvents regardless of polymerization catalysts but the polymers were found to be stable to air oxidation. Thermogravimetric analyses and thermal transitions of poly(PA) and poly(DEPA) were also studied. © 1992 John Wiley & Sons, Inc.     

Polymerization of N-carbazolylacetylene by various transition metal catalysts and polymer properties

N-Carbazolylacetylene (CzA) was polymerized in the presence of various transition metal catalysts including WCl₆, MoCl₅, [Rh(NBD)Cl]₂, and Fe(acac)₃ to give polymers in good yields. The polymers produced with W catalysts were dark purple solids and soluble in organic solvents such as toluene, chloroform, etc. The highest weight-average molecular weight of poly(CzA) reached about 4 × 10⁴. In the UV–visible spectrum in CHCl₃, poly(CzA) exhibited an absorption maximum around 550 nm (ε_max = 4.0 × 10³ M⁻¹ cm⁻¹) and the cutoff wavelength was 740 nm, showing a large red shift compared with that of poly(phenylacetylene) [poly(PA)]. Poly(CzA) began to lose weight in TGA under air at 310°C, being thermally more stable than poly(PA) and poly[3-(N-carbazolyl)-1-propyne]. Poly(CzA) showed a third-order susceptibility of 18 × 10⁻¹² esu, which was 2 orders larger than that of poly(PA). © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2489–2492, 1998     

Polymerization of N-vinylcarbazole by transition metal salts

The polymerization of N-vinylcarbazole (NVC) in the presence of transition metal salts such as WCI₆, MoCI₅, TaCl₅ and NbCl₅ under different reaction conditions was studied. In general, aromatic solvents were found to be superior to aliphatic solvents in the polymerization of NVC, i. e., both conversion and molecular weight were higher in aromatic solvents. It was observed that the polymerization reaction proceeds rapidly and almost quantitatively, even at low monomer concentration (< 5 × 10^?2M) and at low catalyst to monomer mole ratio (10^?5) in aromatic solvents. The copolymerization of NVC with acenaphthylene (ACN) was also investigated in solution at room temperature. The resulting homo- and copolymer were characterized by IR, NMR, x-ray diffraction, and elemental analysis. Thermal and photophysical properties are also reported. From the spectral data, the polymerization solvent was found to have a strong influence upon the polymer stereoregularity.     

Polymerization of 4-phenyl-1-butyne catalyzed by metathesis and Ziegler–Natta catalysts

The polymerization of 4-phenyl-1-butyne was carried out using metathesis and Ziegler-Natta catalysts. Especially, the Fe(acac)₃-AlEt₃ catalyst with toluene as a solvent produced an extremely high molecular weight polymer of M_w ≈ 10⁶. Solubility of the polymers at room temperature in organic solvents such as benzene, toluene, dichloromethane, chloroform, and THF was excellent despite their high molecular weights. It has been indicated that the polymer prepared by the Fe(acac)₃-AlEt₃ catalyst is of cis form with a high stereoregularity. © 1993 John Wiley & Sons, Inc.     

New supramolecular transition metal catalysts

The covalent connection of a catalytically active transition metal center with a water-soluble receptor (host molecule) generates a new type of supramolecular catalyst in which the features of molecular recognition, phase transfer catalysis and transition metal catalysis are combined in a single system. The first examples of this principle make use of commercially available β-cyclodextrin (β-CD) as the receptor and rhodium complexes of diphosphanes as the catalytically active center, these being covalently connected to one another via a spacer. In competitive hydrogenation of certain olefins, unusual degrees of substrate selectivity based on molecular recognition are observed, not possible by conventional transition metal catalysts. The two-phase (water/organic) hydrogenation of nitro-aromatics also is a smooth process catalyzed by these supramolecular complexes. They also constitute an unusually active catalyst system for the selective hydroformylation of higher olefins such as 1-octene in a two-phase system. Dendrimers having diphosphane moieties on the surface provide ligands for transition metals, the corresponding metal complexes (e.g., Pd) functioning as efficient catalysts which can be recycled due to their nanoscopic properties.     

Encapsulation of transition metal catalysts by ligand-template directed assembly

Encapsulated transition metal catalysts are presented that are formed by templated self-assembly processes of simple building blocks such as porphyrins and pyridylphosphine and phosphite ligands, using selective metal-ligand interactions. These ligand assemblies coordinate to transition metals, leading to a new class of transition metal catalysts. The assembled catalyst systems were characterized using NMR and UV-vis spectroscopy and were identified under catalytic conditions using high-pressure infrared spectroscopy. Tris-3-pyridylphosphine binds three mesophenyl zinc(II) porphyrin units and consequently forms an assembly with the phosphorus donor atom completely encapsulated. The encapsulated phosphines lead exclusively to monoligated transition metal complexes, and in the rhodium-catalyzed hydroformylation of 1-octene the encapsulation of the catalysts resulted in a 10-fold increase in activity. In addition, the branched aldehyde was formed preferentially (l/b = 0.6), a selectivity that is highly unusual for this substrate, which is attributed to the encapsulation of the transition metal catalysts. An encapsulated rhodium catalyst based on ruthenium(II) porphyrins and tris-meta-pyridyl phosphine resulted in an even larger selectivity for the branched product (l/b = 0.4). These encapsulated catalysts can be prepared easily, and various template ligands and porphyrins, such as tris-3-pyridyl phosphite and ruthenium(II) porphyrins, have been explored, leading to catalysts with different properties.     

Polymerization of 1-ethynylcyclohexene by tungsten and molybdenum-based catalysts

1-Ethynylcyclohexene, an acetylene derivative having cyclohexenyl substituent, was polymerized by various W- and Mo-based catalysts. WCl₆-EtAlCl₂ catalyst system was found to be very effective for this polymerization. The effects of the monomer-to-catalyst mol ratio, the initial monomer concentration, the temperature, and the cocatalysts for the polymerization of 1-ethynylcyclohexene by WCl₆ were investigated. The catalytic activity of Mo-based catalysts was found to be similar to that of W-based catalysts. The polymer structure was identified to have a conjugated polymer backbone carrying a cyclohexenyl substituent. The resulting polymers were light-brown powder and completely soluble in aromatic and halogenated hydrocarbon solvents such as chlorobenzene, benzene, chloroform, carbon tetrachloride, etc. Studies of the thermal properties and morphology of poly(1-ethynylcyclohexene) were also carried out. © 1995 John Wiley & Sons, Inc.     

Chelation-assisted carbon-hydrogen and carbon-carbon bond activation by transition metal catalysts

Herein we describe the chelation-assisted C-H and C-C bond activation of carbonyl compounds by Rh1 catalysts. Hydroacylation of olefins was accomplished by utilizing 2-amino-3-picoline as a chelation auxiliary. The same strategy was employed for the C-C bond activation of unstrained ketones. Allylamine 24 was devised as a synthon of formaldehyde. Hydroiminoacylation of alkynes with allylamine 24 was applied to the alkyne cleavage by the aid of cyclohexylamine.     

Polymerization by transition metal derivatives. XII. Factors controlling activity and stereospecificity in the 1,4 polymerization of butadiene by monometallic nickel catalysts

In the course of investigations of polymerization of diolefins by transition metal derivatives, we have synthesized various monometallic nickel coordination catalysts. The complexes were prepared by reacting 2,6,10-dodecatriene-1,12-diyl nickel with protonic acids; they were shown to initiate the stereospecific polymerization of 1,3-butadiene. The study of these catalysts showed the strong influence of the nature of the counteranion used on the stereospecificity and the polymerization rate. Moreover, by adding various ligands, we were able to modify the behavior of the catalytic systems and to prepare either pure cis-1,4 or pure trans-1,4 or cis–trans equibinary polybutadienes, starting from the same complex and keeping a high 1,4 specificity. Some of these modifications were shown to be reversible.     

Polymerization of 3-methyl-1-butene promoted by metallocene catalysts

3-Methyl-1-butene was polymerized in the presence of a number of homogeneous metallocene catalysts (co-catalyst methylalumoxane). Contrary to literature reports, it was found that even the simplest C₂-symmetric metallocenes promote the isotactic polymerization of this monomer with reasonable productivities. Quite surprisingly, a prevailingly isotactic polymer was also obtained in the presence of C_s-symmetric metallocenes, which are instead syndiotactic-specific in propene polymerization.     

过渡金属掺杂亚铁锌双金属氰化物催化合成生物柴油的研究

研究了掺杂过渡金属盐(La、Ce、Zr、Mn)对亚铁锌双金属氰化物(DMC)固体酸催化剂合成生物柴油的影响,并采用XRD、FT-IR、ICP、BET等方法对其进行结构和性能表征。结果表明,1%的镧、铈、锆、锰金属盐对催化剂的活性都有提高,其中,添加1%镧的DMC催化剂活性最高,在醇油摩尔比16∶1,反应温度160 ℃,催化剂加入量2%条件下,反应7 h,脂肪酸甲酯收率达到99.3%。过渡金属盐引入对催化剂的组成没有影响,但使得催化剂更加分散,颗粒粒径更小,比表面积变大,有利于催化剂和反应物的接触,从而提高了催化剂活性。     

Synthesis of biodiesel by transition metal doped Fe/Zn double metal cyanide complex catalysts

研究了掺杂过渡金属盐(La、Ce、Zr、Mn)对亚铁锌双金属氰化物(DMC)固体酸催化剂合成生物柴油的影响,并采用XRD、FT-IR、ICP、BET等方法对其进行结构和性能表征.结果表明,1％的镧、铈、锆、锰金属盐对催化剂的活性都有提高,其中,添加1％镧的DMC催化剂活性最高,在醇油摩尔比16∶1,反应温度160℃,催化剂加入量2％条件下,反应7h,脂肪酸甲酯收率达到99.3％.过渡金属盐引入对催化剂的组成没有影响,但使得催化剂更加分散,颗粒粒径更小,比表面积变大,有利于催化剂和反应物的接触,从而提高了催化剂活性.     

Polymerization of phenylacetylene by iridium catalysts

Polymerization of phenylacetylene (PA) with [(cod)IrCl]₂‐based catalysts (cod: 1,5‐cyclooctadiene) was examined. The [(cod)IrCl]₂/n‐BuLi and [(cod)IrCl]₂/Ph₂C?C(Ph)Li systems induced the polymerization of PA to produce polymers with a number‐average molecular weight (M_n) of around several thousand in rather low yields. On the other hand, the catalyst composed of [(cod)IrCl]₂, norbornadiene (nbd), Ph₃P, and Ph₂C?C(Ph)Li (molar ratio of 1:1:1.1:2) produced polymer in a high yield (ca. 80%) in toluene at 0 °C. The resulting polymer showed a bimodal gel permeation chromatographic profile (M_n = 209,000 and 4300; ratio: 81/19). On the basis of these findings, the presence of two active species, that is, Ir complexes with nbd and cod, are discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1075–1080, 2002     

Polymerization of alkoxyallenes by transition-metal catalysts

The structure of polymers obtained by polymerization of methoxyallene and ethoxyallene with transition-metal catalysts depends on the catalyst employed. Rapid polymerization at 0°C through the unsubstituted double bond occurred with π-allylnickel halides, NiCl₂/AlEt₃ and CoCl₂/AlEt₃, yielding polymers with the structure Typical Ziegler–Natta catalysts (TiCl₄, VOCl₃ or FeCl₃ with AIEt₃) gave polymers mainly with the structure although some of the structural units were probably present as well. Polymers having conjugated double bonds were prepared with PdCl₂, [(π-allyl)PdCl]₂, and PdCl₂(C₆H₅CN)₂ as catalysts. Palladium iodide produced polymers with all three of the above structural units present. Polymerization occurred more slowly with these palladium catalysts. A preliminary examination of the effect of variation of solvent, ligand, co-catalyst, and temperature on the rate and structure of the polymers obtained with the palladium catalysts is reported.     

Polymerization of propene by post-metallocene catalysts

In the last few years several non-metallocene catalysts have been disclosed as efficient catalysts for the stereospecific polymerization of propene. In this paper we summarize some recent literature data and some new results concerning the stereochemical mechanism of propene polymerization promoted by late transition metal systems and group 4 metal bis(phenoxyimine) systems. NMR analysis of the fine structure of the polymers obtained, in some cases using isotopically enriched reagents, provides valuable information on the regiochemistry and stereochemistry of the polymerization.