Polymerization of silylacetylenes by W and Mo catalysts

Polymerization of HC?CSiMe₃ homologues (HC?CSiMe₂R; R = n-C₆H₁₃, CH₂CH₂Ph, CH₂Ph, Ph, and t-Bu) was studied by use of W and Mo catalysts. W catalysts provided polymers in good yields from all these monomers. Mo catalysts gave mainly a polymer from HC?CSiMe₂–t-Bu, but virturally only cyclotrimers from sterically less croweded monomers (R = n-C₆H₁₃, CH₂CH₂Ph, CH₂Ph, and Ph). Polymers with flexible R groups (n-C₆H₁₃, CH₂CH₂Ph, and CH₂Ph) were totally soluble, their number-average molecular weights being 7000–18,000. Polymers with inflexible R groups (Ph and t-Bu) were partly insoluble. Every polymer was a yellow rubber or powder, and had the structure, \documentclass{article}\pagestyle{empty}\begin{document}$ \rlap{--} [{\rm CH} = {\rm C}\left( {{\rm SiMe}_{\rm 2} {\rm R}} \right)\rlap{--} ]_n $\end{document}. The results were compared with the polymerization and polymer of HC?CSiMe₃.     

Amphiphilic block copolymers of vinyl ethers by living cationic polymerization. II. Synthesis and surface activity of macromolecular amphiphiles with pendant amino groups

Amphiphilic block polymers of vinyl ethers (VEs). $\rlap{--} [{\rm CH}_{\rm 2} {\rm CH}\left( {{\rm OCH}_{\rm 2} {\rm CH}_{\rm 2} {\rm NH}_{\rm 2} } \right)\rlap{--} ]_m \rlap{--} [{\rm CH}_{\rm 2} {\rm CH}\left( {{\rm OR}} \right)\rlap{--} ]_n \left( {{\rm R: }n{\rm - C}_{{\rm 16}} {\rm H}_{{\rm 33}} ,{\rm }n{\rm - C}_{\rm 4} {\rm H}_{\rm 9} ;m \simeq 40,{\rm n} = 1 - 10} \right)$ were prepared, each of which consists of a hydrophilic segment with pendant primary amino groups and a hydrophobic poly(alkyl VE) segment. Their precursors were obtained by the HI/I₂-initiated sequential living cationic polymerization of an alkyl VE and a VE with a phthalimide pendant (CH₂ = CHOCH₂CH₂Im; Im; phthalimide group), where the segment molecular weights and compositions (m/n ratio) could be controlled by regulating the feed ratio of two monomers and the concentration of hydrogen iodide. Hydrazinolysis of the imide functions gave the target polymers which were readily soluble in water under neutral conditions at room temperature. These amphiphilic block polymers lowered the surface tension of their aqueous solutions (0.1 wt%, 25°C) to a minimum ? 30 dyn/cm when the hydrophobic pendant R was n-C₄H₉ (n = 4–9). The polymers with n-C₄H₉ pendants in the hydrophobic segment exhibited a higher surface activity than those with n-C₁₆ H₃₃ pendants. The surface activity of the polymers also depended on the pH of the polymer solutions; the surface activity increased in more basic solutions where the ionization of the amino group (? NH₂)2? NH₃^⊕) is suppressed.     

α,ω-Disubstituted polymethylpolyphosphonates and polyphenylpolyphosphonates from condensation polymerization

Condensation polymerization of phosphonates through formation of P? O? P linkages has been achieved by (1) volatilization of methyl chloride from mixtures of CH₃P(O)Cl₂ with CH₃P(O)(OCH₃)₂; (2) volatilization or chemical removal of water from CH₃P(O)(OH)₂; and (3) volatilization of HCl from mixtures of CH₃P(O)Cl₂ with CH₃P(O)(OH)₂ or C₆H₅P(O)Cl₂ with C₆H₅P(O)(OH)₂. Depending on the proportions of the reagents, the polymerization products consist of various mixtures of chain molecules of the type \documentclass{article}\pagestyle{empty}\begin{document}${\rm X \hbox{--} P}({\rm O})({\rm R})\rlap{--}[{\rm O \hbox{--} P}({\rm O})({\rm R})\rlap{--}]_n {\rm X}$\end{document} for R = CH₃ and X = OCH₃, Cl, or OH, or for R = C₆H₅, x = Cl or OH. ³¹P nuclear magnetic resonance (NMR) was used to investigate both the polymethylpolyphosphonates and the polyphenylpolyphosphonates; and ¹H NMR of the CH₃P and CH₃O moieties was also used to study the polymethylpolyphosphonates. In the methoxyl-terminated polymethylpolyphosphonates, which was the system studied most extensively, no detectable amounts of cyclic molecules were found at equilibrium, but a crystalline methylphosphonic anhydride, CH₃PO₂, exhibited some ring structures. The equilibrium size distributions gave evidence that the sorting of the mono- and difunctional phosphorus-based units making up the oligomeric chains is affected by neighboring units. Kinetic measurements demonstrated that the condensation polymerization is a complicated process involving considerable scrambling of terminal groups with bridging oxygen atoms.     

Structure and formation of gaseous [C4H5O]+ Ions. II–Ions of the type HCC?\documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}(OH)(CH3)

Loss of an alkyl group X? from acetylenic alcohols HC?C? CX(OH)(CH₃) and gas phase protonation of HC?C? CO? CH₃ are both shown to yield stable HC?C? \documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}(OH)(CH₃) ions. Ions of this structure are unique among all other [C₄H₅O]⁺ isomers by having m/z 43 [C₂H₃O]⁺ as base peak in both the metastable ion and collisional activation spectra. It is concluded that the composite metastable peak for formation of m/z 43 corresponds to two distinct reaction profiles which lead to the same product ion, CH₃\documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}?O, and neutral, HC?CH. It is further shown that the [C₄H₅O]⁺ ions from related alcohols (like HC?C? CH(OH)(CH₃)) which have an α-H atom available for isomerization into energy rich allenyl type molecular ions, consist of a second stable structure, H₂C?\documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}? C(OH)?CH₂.     

Polyfluoroethers from 2,2,3,3,4,4-hexafluoropentanediol and bis(chloromethyl) ether and bishalomethyl-substituted aromatic compounds

The polyfluoroethers \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm \rlap{--}[OCH}_{\rm 2} {\rm XCH}_{\rm 2} {\rm OCH}_{\rm 2} ({\rm CF}_{\rm 2} )_3 {\rm CH}_{\rm 2} \rlap{--} ]_n $\end{document} (X = O, 1,3-C₆H₄, 1,4-C₆H₄ or 4,4′-C₆H₄OC₆H₄) and copolymers (X = 1,3- and 1,4-C₆H₄) having inherent viscosities in acetone >0.5 dl/g were prepared in good yields by treatment of the mixture of sodium salts obtained from 2,2,3,3,4,4-hexafluoropentanediol and an excess of sodium hydride in tetramethylene sulfone (TMS)-tetrahydrofuran or TMS-petroleum ether with the appropriate bishalomethyl compound. The polymers varied from highly extensile elastomeric gums when X = O or 1,3-C₆H₄ to a leathery material when X = 4,4′-C₆H_4?OC₆H₄. Glass transition temperatures ranged from -43°C when X = 0 to 6°C when X = 4,4′-C₆H₄OC₆H₄. The polymers started to lose weight (by thermogravimetry) at 220–250°C in oxygen and at 250–290°C in nitrogen. However, the xylylene polymers underwent structural changes even at room temperature, as reflected by changes in solution viscosity. Attempts to cure the polymer when X = O with peroxides were unsuccessful.     

Alternating copolymerization of dienes with α-olefins

Alternating copolymerization of butadiene with several α-olefins and of isoprene with propylene were investigated by using a mixture of VO(Acac)₂, Et₃Al, and Et₂AlCl as catalyst. The alternating copolymerization ability of the olefins decreases in the order, propylene > 1-butene > 4-methyl-1-pentene > 3-methyl-1-butene. The study on the sequence of the copolymer of isoprene with propylene by ozonolysis reveals that the polymer chain is reasonably expressed by the sequence \documentclass{article}\pagestyle{empty}\begin{document}$ \rlap{--} [{\rm CH}_{\rm 2} \hbox{--} {\rm CH} \hbox{=\hskip-1pt=} {\rm C(CH}_{\rm 3}) \hbox{--} {\rm CH}_{\rm 2} \hbox{--} {\rm CH(CH}_{\rm 3}) \hbox{--} {\rm CH}_{\rm 2} \rlap{--}]_n $\end{document}. NMR and infrared spectra indicate that the chain is terminated with propylene unit, forming a structure of ?C(CH₃)? CH₂? C(CH₃)?CH₂ involving a vinylene group.     

Structure and formation of gaseous [C4H5O]+ ions. III—Ions derived from unsaturated ethers

The abundant [C₄H₅O]⁺ (m/z 69) ions found in the 70 eV mass spectra of a series of acetylenic, allenylic and unsaturated cyclic ethers are shown to have the following structures: HC?C? \documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}H? OCH₃ (e), H₂C?C?—OCH₃ (f), (g) and H? C?C? CH₂—O\documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}H₂ (h). Of these, the cyclic ion g is the most stable: its ion enthalpy (≥ 165 kcal mol^?1) is close to that found for the acyclic C₃H₅\documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}? O isomers identified in a previous study. Evidence that these four isomeric [C₄H₅O]⁺ ions are stable species with lifetimes ≥ 10^?5 s is obtained from their collisional activation spectra, the shape of the metastable peaks and the associated kinetic energy release values for the common loss of CO, thermochemical information and analysis of deuterium and carbon-13 labelled precursor molecules. It is further shown that loss of X? from ethers of the type X? C?C? CH₂OCH₃ involves isomerization into energy rich allenyl type ions [(X)HC?C?CHOCH₃]⁺˙ . These ions undergo loss of X? by simple bond cleavage, yielding, e type product ions, when the C? X bond strength is relatively low (X?I, Br). When X?Cl and especially CH₃ or H, X? is only lost after rearrangement yielding the cyclic product ion g. The mechanism for this cyclization reaction is related to that proposed in a previous study for the ester→ acid isomerization in the molecular ions of the esters of α, β-unsaturated carboxylic acids.     

Applications of NMR spectroscopy of chiral association complexes 5. Stereodynamics and diastereotopism in chiral 1,3-dienes \documentclass{article}\pagestyle{empty}\begin{document}${\rm HOCMe}_{\rm 2} \rlap{--} ({\rm CCl =\!= CCl\rlap{--})}_{\rm 2} {\rm X}$\end{document}

The barriers to partial rotation around the central single bond in chiral dienes \documentclass{article}\pagestyle{empty}\begin{document}${\rm HOCMe}_{\rm 2} \rlap{--} ({\rm CCl =\!= CCl\rlap{--})}_{\rm 2} {\rm X}$\end{document} have been determined by coalescence of either ¹H NMR signals (X = CH₂OCH₃) or ¹³C NMR signals (X = H). In the presence of the optically active shift reagent (+) ? Eu(hfbc)₃ all ¹H signals were split at temperatures where the interconversion of enantiomers is slow. The temperature dependence of these spectra also yielded free activation enthalpies for the enantiomerizations which were in agreement with the ones obtained without Eu(hfbc)₃. The assignment of the four methyl resonances appearing in the presence of (+) ? Eu(hfbc)₃ at low temperature was possible by gradually increasing the rate of enantiomerization or gradually replacing the optically active auxiliary compound by the racemic one.     

Optical anisotropy of polymer chains and Markov processes. II. Polyoxyethylene

A comparative study of the average molecular optical anisotropy 〈γ²〉 of the polyoxyethylene chain, \documentclass{article}\pagestyle{empty}\begin{document}${\rm R} \hbox{---} {\rm O}\rlap{--} ({\rm CH}_2 {\rm CH}_2 {\rm O}\rlap{--} )_n {\rm R}$\end{document} where R = CH₃, H and n is the degree of polymerization of the molecule, was carried out for the different internal rotational models considered in Part I of this series. In particular, the results obtained show that the condition of interdependence between internal rotational angles of nearest-neighboring bonds increases the average molecular optical anisotropy by about 4% (n ? 1), compared with the case of independent rotations. This increase is much weaker than in polyethylene chains, for which it is about 20% under analogous conditions.     

Polymerization of σ-bonded organo-transition metal derivatives of styrene

Five new monomers of transition metal complexes containing a styryl group, trans-\documentclass{article}\pagestyle{empty}\begin{document}$ {\rm Pd}({\rm PBu}_{\rm 3})_2 \rlap{--} ({\rm C}_6 {\rm H}_4 {\rm CH} \hbox{=\hskip-2pt=} {\rm CH}_2 ){\rm X\ X \hbox{=\hskip-2pt=} Cl(Ia),\ X \hbox{=\hskip-2pt=} Br(Ib)},\ {\rm X \hbox{=\hskip-2pt=} CN(Ic),\ X \hbox{=\hskip-2pt=} Ph(Id)} $\end{document} and trans-\documentclass{article}\pagestyle{empty}\begin{document}${\rm Pt(PBu}_{\rm 3} {\rm )}_{\rm 2} \rlap{--} ({\rm C}_{\rm 6} {\rm H}_{\rm 4} {\rm CH} \hbox{=\hskip-2pt=} {\rm CH}_2 ){\rm Cl}({\rm II})$\end{document}, were synthesized. The monomers were readily homopolymerized in benzene with the use of AIBN or BBu₃–oxygen as the initiator. Copolymerization of Ia with styrene was carried out by using AIBN. From the Cl content of the copolymers by analysis, monomer reactivity ratios and Q–e values were obtained as follows: r₁ = 1.49, r₂ = 0.45; Q₂ = 0.41, e₂ = ?1.4 (M₁ = styrene, M₂ = Ia). Based on the above data, the σ-bonded palladium moiety at para position of styrene acts as a strongly electron-donating group to the phenyl ring. This is also supported by the olefinic β-carbon chemical shift of ¹³C NMR for Ia.     

Synthesis of polyamides by the polyaddition of bissuccinimides with diamines

Polyamides which contain succinamide units, ? NHCO? (CH₂)₂? CONH? were prepared by the ring-opening polyaddition of bissuccinimides with diamines at 200°C. in bulk. Nylon 24 and nylon 64 were prepared by the reaction of N,N′-ethylenedisuccinimide with ethylenediamine and of N,N′-hexamethylenedisuccinimide with hexamethylenediamine, respectively. It was suggested that the transamidation reaction by aminolysis influenced the detailed structures of the polymers prepared from N,N′-ethylenedisuccinimide and hexamethylenediamine and from N,N′-hexamethylenedisuccinimide and ethylenediamine. The detailed structures of the polymers are discussed on the basis of their melting points and x-ray diagrams. It is concluded that the polymers contain a crystalline portion of \documentclass{article}\pagestyle{empty}\begin{document}$ \rlap{--}[{\rm NH \hbox{--} (CH}_2 {\rm)}_{\rm 2} {\rm \hbox{--} NHCO \hbox{--}}({\rm CH}_2)_2 {\rm \hbox{--} CONH \hbox{--}}({\rm CH}_2)_6 {\rm \hbox{--} NHCO \hbox{--}}({\rm CH}_2)_2 {\rm \hbox{--} CO\rlap{---}]} $\end{document} sequences.     

Zur Kenntnis der Organophosphorverbindungen. XV. Darstellung und Reaktionen von Trimethylsilylestern der Phosphinsäuren

On Organophosphorus Compounds. XV. Preparation and Reactions of Trimethylsilyl Esters of Phosphinic Acids Trimethylsilylesters of Phosphinic acids R₂P(X)YSi(CH₃)₃ (R ? CH₃, C₂H₅, C₃H₇, t?C₄H₉, C₆H₅; X, Y ? O, S) were prepared by 7 different methods as in some cases easily hydrolysable but thermally remarkably stable compounds. The properties and some reactions of these substances are reported, their structures confirmed by IR? as well as ¹H- and ³¹P-NMR-spectroscopy. Dimethylsilylen-bis(phosphinic acid esters) were obtained according to \documentclass{article}\pagestyle{empty}\begin{document}$ 2{\rm R}_{2} {\rm P(\rm X)\rm ONH}_{4} + {\rm R}_{\rm 2} {\rm SiCl}_{2} \to 2{\rm E NH}_{4} {\rm Cl + R}_{2} {\rm P(X) - O - SiR}_{2} - {\rm O - P(X)R}_{2} ({\rm R = CH}_{3};{\rm X = O,S}) $\end{document}.     

Three new isomers of [C2H6O]+˙: The radical cations [CH3O(H)CH2]+˙, [CH3CHOH2]+˙ and a low-energy isomer of unassigned structure

Three new [C₂H₆O]⁺˙ ions have been generated in the gas phase by appropriate dissociative ionizations and characterized by means of their metastable and collisionally induced fragmentations. The heats of formation, ΔH_f⁰, of the two ions which were assigned the structures [CH₃O(H)CH₂]⁺˙ and [CH₃CHOH₂]⁺˙ could not be measured. The third isomer, to which the structure \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm CH}_{\rm 2} = \mathop {\rm C}\limits^{\rm .} {\rm H} \cdot \cdot \cdot \mathop {\rm H}\limits^ + \cdot \cdot \cdot {\rm OH}_{\rm 2} $\end{document} is tentatively assigned, was measured to have ΔH_f⁰ = 732±5 kJ mol^?1, making it the [C₂H₆O]⁺˙ isomer of lowest experimental heat of formation. It was found that the exothermic ion–radical recombinations [CH₂OH]⁺+CH₃˙→[CH₃O(H)CH₂]⁺˙ and \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm CH}_{\rm 3} \mathop {\rm C}\limits^{\rm + } {\rm HOH + H}^{\rm .} $\end{document}→[CH₃CHOH₂]⁺˙ have large energy barriers, 1.4 and ?0.9 eV, respectively, whereas the recombinations yielding [CH₃CH₂OH]⁺˙ have little or none.     

Polymerization of (o-methylphenyl)acetylene and polymer characterization

(o-Methylphenyl)acetylene polymerized with high yields in the presence of W and Mo catalysts. W catalysts were more active than the corresponding Mo catalysts. The weight-average molecular weight of the polymer formed with W(CO)₆–CCl₄–hv reached 8 × 10⁵, being higher than the maximum value (ca. 2 × 10⁵) for poly(phenylacetylene). The polymer had the structure $\rlap{--} [{\rm CH} \hbox{=\hskip-1pt=} {\rm C}(o - {\rm CH}_3 {\rm C}_6 {\rm H}_4 )\rlap{--} ]_n $. The stereochemical structure of the main chain could be determined by ¹³C-NMR; the cis content varied in a range of 41–61% depending on the polymerization conditions. The present polymer was thermally more stable than poly(phenylacetylene) according to thermogravimetric analysis. Interestingly, this polymer possessed deeper color than poly(phenylacetylene), and showed a fairly strong absorption in the visible region.     

The gas phase ion chemistry of the acetyl cation and isomeric [C2H3O]+ ions. On the structure of the [C2H3O]+ daughter ions generated from the enol of acetone radical cation

Methods are described for the unequivocal identification of the acetyl, [CH₃? \documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document} ?O] (a), 1-hydroxyvinyl, [CH₂?\documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}? OH] (b), and oxiranyl, (d), cations. They involve the careful examination of metastable peak intensities and shapes and collision induced processes at very low, high and intermediate collision gas pressures. It will be shown that each [C₂H₃O]⁺ ion produces a unique metastable peak for the fragmentation [C₂H₃O]⁺ → [CH₃]⁺+CO, each appropriately relating to different [C₂H₃O]⁺ structures. [CH₃? \documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}?O] ions do not interconvert with any of the other [C₂H₃O]⁺ ions prior to loss of CO, but deuterium and ¹³C labelling experiments established that [CH₂?\documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}? OH] (b) rearranges via a 1,2-H shift into energy-rich leading to the loss of positional identity of the carbon atoms in ions (b). Fragmentation of b to [CH₃]⁺+CO has a high activation energy, c. 400 kJ mol^?1. On the other hand, , generated at its threshold from a suitable precursor molecule, does not rearrange into [CH₂?\documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}? OH], but undergoes a slow isomerization into [CH₃? \documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}?O] via [CH₂\documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}HO]. Interpretation of results rests in part upon recent ab initio calculations. The methods described in this paper permit the identification of reactions that have hitherto lain unsuspected: for example, many of the ionized molecules of type CH₃COR examined in this work produce [CH₂?\documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}? OH] ions in addition to [CH₃? \documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}?O] showing that some enolization takes place prior to fragmentation. Furthermore, ionized ethanol generates a, b and d ions. We have also applied the methods for identification of daughter ions in systems of current interest. The loss of OH^˙ from [CH₃COOD]^+˙ generates only [CH₂?\documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}? OD]. Elimination of CH₃^˙ from the enol of acetone radical cation most probably generates only [CH₃? \documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}?O] ions, confirming the earlier proposal for non-ergodic behaviour of this system. We stress, however, that until all stable isomeric species (such as [CH₃? \documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm O}\limits^{\rm + } $\end{document}?C:]) have been experimentally identified, the hypothesis of incompletely randomized energy should be used with reserve.     

Structure and formation of gaseous [C4H5O]+ ions. IV—Ions derived from the cyclopropenium ion [C3H3]+

Characterization of [C₄H₅O]⁺ ions in the gas phase using their metastable ion and collisional activation spectra shows that the three isomeric ions HC?C? \documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}H? OCH₃, CH₃O? \documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm + } $\end{document}?C?CH₂ and ? OCH₃ related to the two stable [C₃H₃]⁺ cations [HC?C? CH₂]⁺ and are stable for ≥ 10^?5s. In contrast to the formation of cyclopropenium ions, it is found that the methoxy cyclopropenium ion is not generated from acyclic precursor molecules. The small but significant intensity differences found in the collisional activation spectra of [C₃H₃]⁺ ions generated from HC?C? CH₂I and HC?C? CH₂Cl possibly indicate the presence of [C₃H₃]⁺ ions of different structures.     

The collisionally induced dissociation of allyl and 2-propenyl cations

Pure [CH₂CHCH₂]⁺ and \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm{CH}}_{\rm{3}} \mathop {\rm{C}}\limits^{\rm{ + }} = {\rm{CH}}_{\rm{2}} $\end{document} ions are generated only in metastable fragmentations of [CH₂?CHCH₂X]⁺˙, X=Cl, Br, I, and [CH₃CX?CH₂]⁺˙, X=Br, I, respectively. For ion source generated [C₃H₅]⁺ ions there is some structural interconversion. The structure characteristic feature of their collisional activation mass spectra is the ratio m/z 27 ([C₂H₃]⁺): m/z 26 ([C₂H₂]⁺˙). For \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm{CH}}_{\rm{3}} \mathop {\rm{C}}\limits^{\rm{ + }} = {\rm{CH}}_{\rm{2}} $\end{document} the ratio is only weakly dependent upon the translational energy of the ion. For [CH₂CHCH₂]⁺, the ratio rises sharply as translational energy is reduced, from 0.9 at 8 kV to c. 3 at 1 kV. [CH₂CHCH₂]⁺ ions generated by charge reversal of [CH₂CHCH₂]^? show higher ratios, resulting from their lower average internal energy content. It must therefore be emphasized that [C₃H₅]⁺ ion structure assignments should only be made using reference data which apply to specific experimental conditions. [C₃H₅]⁺ daughter ion structures for a number of well-known fragmentations have been established. The heat of formation of the 2-propenyl cation was measured to be 969±5 kJ mol^?1. Labelling experiments show that at low internal energies, allyl cations do not undergo atom randomization in c. 1–2 μs; high internal energy ions of longer lifetime (c. 8 μs) show complete atom randomization. H^˙ atom loss from [¹³CH₃CH?CH₂]⁺˙ has been shown to generate [¹³CH₂CHCH₂]⁺ and \documentclass{article}\pagestyle{empty}\begin{document}$ {}^{{\rm{13}}}{\rm{CH}}_{\rm{2}} \mathop {\rm{C}}\limits^{\rm{ + }} - {\rm{CH}}_{\rm{3}} $\end{document} without any skeletal rearrangement.     

Reaction of hydrogen atoms with dimethyldisulfide

Hydrogen atoms, generated by the mercury (³P₁) sensitization of H₂, were allowed to react with dimethyldisulfide in the temperature range of 25–155°C. The only retrievable product is methanethiol, formed in the primary metathetical reaction \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm H} + {\rm CH}_3 {\rm SSCH}_3 {\rm CH}_3 {\rm SH} + {\rm CH}_3 {\rm S} $\end{document}. The intermediacy of thiyl radicals was clearly demonstrated in experiments carried out in the presence of ethylene where one of the major products detected was ethyl methyl sulfide, formed via CH₃S + C₂H₅ → CH₃SC₂H₅. The major fate of the CH₃S radical is recombination and disproportionation, and the yield of methanethiol formed via disproportionation contributes less than 5% to the total thiol yield. The rate coefficient of step 1, from competition with the reaction \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm H} + {\rm C}_{\rm 2} {\rm H}_{\rm 4} {\rm C}_{\rm 2} {\rm H}_5 $\end{document}, is k₁ = (5.7 ± 1.2) × 10¹² exp[? (100 ± 100)/RT] cm³/mol sec.     

Loss of H2O from M + t-Butyl Complex Ions of Benzyl Alcohol in Isobutane Chemical Ionization Mass Spectrometry

In isobutane chemical ionization mass spectrometry benzyl alcohol exhibits ions at m/z 147 (‘M + 39’) that arise by a loss of H₂O from [M + C₄H₉]⁺, i.e. ‘M + 57’ complex ions. Electrophilic aromatic substitution of a proton at an ortho-position of neutral C₆H₅CH₂OH with [t-C₄H₉]⁺ and, alternatively, nucleophilic substitution of H₂O at the benzylic carbon in \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm C_6 H_5 CH_2}\mathop {\rm O}\limits^+ {\rm H}_2 $\end{document} with CH₂?C (CH₃)₂ are discussed as possible pathways. Evidence in favor of the latter is derived from the analysis of C₆D₅CH₂OH and C₆H₅CD₂OH for the origin of the H-atoms lost in H₂O. The inferred ion structure of m/z 147 is verified by mass-analyzed ion kinetic energy (MIKE.) measurements of its collision-activated (CA.) decomposition. MIKE./CA. spectra of mass-selected m/z 147 ions, once generated by (CI(i-C₄H₁₀) from benzyl alcohol and, once, from 2-methyl-4-phenyl-2-butanol match closely and, thus, reflect identical ion structures. With reference to the simple genesis of this ion from the latter precursor, the structure in question can be concluded to be \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm C_6 H_5 CH_2 CH_2}\mathop {\rm C}\limits^+ ({\rm CH}_3)_2 $\end{document} .     

Polymerization of 1-(trimethylsilyl)-1-propyne homologs containing two silicon atoms by tantalum- and niobium-based catalysts

Polymerization of new 1-(trimethylsilyl)-1-propyne homologs containing two silicon atoms [CH₃C?CSi(CH₃)₂CH₂Si(CH₃)₃ and CH₃C?CSi(CH₃)₂CH₂CH₂Si(CH₃)₃] was investigated by use of Ta and Nb catalysts. CH₃C?CSi(CH₃)₂CH₂Si(CH₃)₃ was polymerized quantitatively by TaCl₅ alone to provide a polymer having molecular weight over 10⁶. CH₃C?CSi(CH₃)₂CH₂CH₂Si(CH₃)₃ was polymerized in good yield by an equimolar mixture of TaCl₅ with an appropriate organometallic cocatalyst such as Ph₄Sn to give a polymer with molecular weight of ca. 4 X 10⁵. Nb catalysts were less active toward these monomers than the corresponding Ta catalysts. These two kinds of polymers had alternating double bonds along the main chain according to IR and ¹³C-NMR spectra. Both polymers were white solids completely soluble in low-polarity solvents like toluene, and solution casting afforded uniform, tough films. These polymers were thermally fairly stable, and their softening points were above 350°C. Films of these polymers showed smaller oxygen permeability coefficients [P = 4 × 10^?9 – 8 × 10^?9 cm³(STP) · cm/(cm²·sec·cmHg)] but larger separation factors [(P/P) = 3.4 – 3.6] than a poly[1-(trimethylsilyl)-1-propyne] film.