Superconductivity in B-doped diamonds

Results of theoretical studies on the surprising discovery of superconductivity in B-doped diamonds are presented. It is stressed that the critical temperatures are very high irrespective of the small density of states at the Fermi energy and the presence of strong disorder as deduced both experimentally and theoretically. It is concluded that this strong attractive interaction comes from particular situation where carriers are doped into the covalent bonds of diamond structure, which naturally have very high Debye frequency. It is indicated that such transformation of covalent bonds into conduction bands by carrier doping can be a candidate for higher critical temperature.     

Change in Continuous Detonation Wave Propagation Mode from Rotating Detonation to Standing Detonation

We perform a three-dimensional numerical simulation based on a one-step chemical reaction model to investigate changes in the mode of H2-Air detonation wave propagation from rotating detonation wave （RDW） mode to standing detonation wave mode. The physical characteristics of an RDW with injection velocity of 500 m/s are analyzed to investigate the physical mechanisms involved. We find that with increasing injection velocity, the detonation wave gradually changes from perpendicular to the head wall to parallel to the head wall. When the injection velocity exceeds the Chapman-Jouguet velocity VCJ （about 1984 m/s）, the detonation wave changes orientation to become perpendicular to the fuel injection direction, and the rotating mode changes accordingly to a standing mode. Finally, the plane detonation characteristic triple-wave structures can be found from the standing mode.     

Short-range order in irradiated diamonds

Using the neutron-diffraction method, it has been established that, when density in irradiated diamonds varies, a transition from a diamond-like amorphous structure to a graphite-like structure occurs. The transition occurs at a density ρ ≈ 2.7–2.9 g/cm³ and is accompanied by a sharp change in resistivity.     

Detonation in gases

We review recent progress in gaseous detonation experiment, modeling, and simulation. We focus on the propagating detonation wave as a fundamental combustion process. The picture that is emerging is that although all propagating detonations are unstable, there is a wide range of behavior with one extreme being nearly laminar but unsteady periodic flow and the other chaotic instability with highly turbulent flow. We discuss the implications of this for detonation propagation and dynamic behavior such as diffraction, initiation, and quenching or failure.     

Application of ultrafine-dispersed diamonds in electroplating

The results obtained upon the electrochemical deposition of composite coatings containing ultrafine-dispersed diamonds produced by detonation synthesis are generalized. The main advantages of such coatings over the well-known composite electrochemical coatings are revealed.     

Structure of ultradisperse diamonds

The structure of crystallites (regions of coherent scattering — RCS), which comprise the grains of ultradisperse diamond (UDD) powder, was investigated by x-ray crystallography and coordination-sphere diffractometry. It was established that the RCS have an average size $\bar L = 42 \pm 2{\AA}$ and that these regions are themselves UDD grains with the structure of a diamond lattice and a negligible content of clusters of carbon atoms distributed throughout the volume that do not form a lattice and are mainly located at interatomic distances ～1.5 Å. The clusters of carbon atoms, for which the distribution of interatomic distances is close to Gaussian, which may indicate an amorphous structure of the boundary layers, lie along grain boundaries.     

Luminescence bands in natural brown diamonds

We report on new luminescence bands exhibited by natural brown/mauve diamonds. We describe detailed absorption and luminescence measurements in the visible spectral region. The structured bands with ZPL at 2.424 eV, 2.114 eV, 1.819 eV and 1.707 eV, and a broad band with a maximum at 1.8 eV are shown to be the main components of the visible luminescence. Bands with ZPL at 2.114 eV, 1.819 eV and 1.707 eV are shown to correspond to forbidden transitions with lifetimes of the order of msec. Energy absorbed by the 2.424 eV centre is transferred into the 1.819 eV centre.     

Red luminescence decay kinetics in Brazilian diamonds

Luminescence kinetics in the temperature range of 80–480 K and the red region of the spectrum is studied for Brazilian diamonds. Components with decay time constants of 23 and 83 ns are observed at room temperature after being excited by laser radiation with wavelengths of 375 and 532 nm, which differs considerably from the data published earlier for the luminescence kinetics of NV⁰- and NV^–-centers.     

Magnetic properties of carbonado diamonds

Carbonados are porous polycrystalline diamonds of uncertain origin, which are found at locations in Bahia (NE Brazil) and in the Central African Republic. Their combination of extreme hardness and toughness is ideal for drilling and cutting tools. A variety of elements including Fe, Ni, Cu and Ag are associated with the diamonds. Following a suggestion that Mn-doped diamond may be intrinsically ferromagnetic, we have analysed six samples from Brazil which show ferromagnetic moments of up to 3 A m² kg⁻¹, which is reduced by acid leaching. X-ray diffraction on the crushed powder showed a cubic diamond structure, with no secondary phases visible. Scanning electron microscopy shows an inhomogeneous distribution of heavy metals and Mössbauer spectroscopy indicates that iron is present as native iron. We find no evidence from the carbonados for the existence of transition-metal doped ferromagnetic carbon. The intrinsic diamagnetic susceptibility of carbonados is −4.5×10⁻⁹ m³ kg⁻¹, similar to the accepted value for diamond,−5×10⁻⁹ m³ kg⁻¹.     

Detonation waves in bubble-drop media

Wave processes in chemically active multicomponent media: liquid — gas bubbles — liquid drops have been studied experimentally. Existence of detonation waves in multicomponent (bubble-drop) media has been proved. Structure of detonation waves in bubble-drop and bubble media is qualitatively identical: detonation waves are solitary waves with pulsation profile the pressure behind which is close in value to the one in unperturbed medium. Propagation velocity of detonation waves in bubble and bubble-drop media drops with the increase in medium gas phase concentration and with the decrease in carrier liquid viscosity. Presence of liquid drops decreases detonation wave velocity compared with bubble medium that does not contain liquid drops. Detonation wave propagation in multicomponent media causes gas bubbles fragmentation as well as fragmentation of individual liquid drops. The work was financially supported by the Russian Foundation for Basic Research (Grant No. 04-03-33106).     

A Detonation Afterburner

Doklady Physics - For the first time, a detonation afterburner (DA) for continuous detonation combustion of TS-1 aviation kerosene was developed, manufactured, and tested. Test fires of the DA in...     

Detonation in an aluminum-Teflon mixture

Detonation in an aluminum-fluoroplastic-4 (Teflon) mixture is studied experimentally. To increase reactivity, the initial mixture is pretreated in a mechanochemical activator. As a result, a mechanically activated composite is obtained in the form of thin aluminum layers in a Teflon matrix. The action of a shock wave on a composite sample initiates the steady detonation regime, in which the initial and final substances are in the condensed state. Depending on the percentage composition and density of the mixture, the detonation velocity varies from 700 to 1300 m/s for the speed of sound below 100 m/s in the initial composition. The steady detonation velocity changes insignificantly when sample pores are filled with helium instead of air. The results prove that it is possible in principle to reach the steady detonation regime in reactive condensed mixtures forming final reaction products in the solid state.     

铝粉-空气混合物爆燃转爆轰过程及爆轰波结构

 在长为32.4 m、内径为0.199 m的大型长直水平管道中,对铝粉-空气两相流的燃烧转爆轰（DDT）过程及爆轰波结构进行了实验研究。对铝粉-空气混合物弱点火条件下DDT过程不同阶段的特征进行了分析,实验结果显示混合物经历了缓慢反应压缩阶段、压缩波加速冲击波形成阶段、冲击反应过渡阶段、冲击反应向过压爆轰过渡阶段和爆轰阶段,得到了混合物各阶段的DDT参数,由此进一步分析了DDT浓度的上、下限。在1.4 m爆轰测试段的4个截面的环向上各均匀安装8个传感器,对爆轰波结果进行测试,并对铝粉-空气混合物爆轰波的单头结构进行了分析。     

Radiation damage in diamonds subjected to helium implantation

Optical spectroscopy and volume “swelling” measurements were used to study radiation damage and graphitization of diamonds implanted with helium ions at temperatures from 77 to 373 K. It is established that the radiation damage decreases as the implantation temperature increases. This effect is explained by radiation-stimulated annealing of defects caused by damaging. It is shown that the result of formation of a graphitized layer is determined not by the implantation dose but by the level of radiation damage. It is found that the lower the implantation temperature, the lower the annealing temperatures required for the formation of a graphitized layer. It is shown that annealing of radiation defects and the formation of a graphitized layer in a diamond occur up to 1600°C.     

Ion-beam studies of synthetic single-crystal diamonds

A surface layer of polished single-crystal diamond plates with the (100) orientation, which can be applied to planar high-frequency high-power microstructures, is investigated by means of ion-beam and X-ray methods. It is demonstrated that the diamond plates are characterized by a high degree of structural perfection and a low level of surface roughness.