A Multiple Structure‐Design Strategy towards Ultrathin Niobate Perovskite Nanosheets with Thickness‐Dependent Photocatalytic Hydrogen‐Evolution Performance

Hydrogen production by catalytic water splitting using sunlight holds great promise for clean and sustainable energy source. Despite the efforts made in the past decades, challenges still exist in pursuing solid catalysts with light‐harvesting capacity, large surface areas and efficient utilities of the photogenerated carrier, at the same time. Here, a multiple structure design strategy leading to highly enhanced photocatalytic performance on hydrogen production from water splitting in Dion–Jacobson perovskites KCa₂Na_{n ‐3}Nb_n O_{3n +1} is described. Specifically, chemical doping (N/Nb⁴⁺) of the parent oxides via ammoniation improved the ability of sunlight harvesting efficiently; subsequent liquid exfoliation of the doped perovskites yielded ultrathin [Ca₂Na_{n ‐3}Nb_n O_{3n +1}]⁻ nanosheets with greatly increased surface areas. Significantly, the maximum hydrogen evolution appears in the n =4 nanosheets, which suggests the most favorable thickness for charge separation in such perovskite‐type catalysts. The optimized black N/Nb⁴⁺‐[Ca₂NaNb₄O₁₃]⁻ nanosheets show greatly enhanced photocatalytic performance, as high as 973 μmol h⁻¹ with Pt loading, on hydrogen evolution from water splitting. As a proof‐of‐concept, this work highlights the feasibility of combining various chemical strategies towards better catalysts and precise thickness control of two‐dimensional materials.     

Polymeric Carbon Nitride/Reduced Graphene Oxide/Fe2O3: All‐Solid‐State Z‐Scheme System for Photocatalytic Overall Water Splitting

The charge transfer between hydrogen evolution photocatalysts (HEPs) and oxygen evolution photocatalysts (OEPs) is the rate‐determining step that controls the overall performance of a Z‐scheme water‐splitting system. Here, we carefully design reduced graphene oxide (RGO) nanosheets for use as solid‐state mediators to accelerate the charge carrier transfer between HEPs (e.g., polymeric carbon nitride (PCN)) and OEPs (e.g., Fe₂O₃), thus achieving efficient overall water splitting. The important role of RGO could also be further proven in other PCN‐based Z‐systems (BiVO₄/RGO/PCN and WO₃/RGO/PCN), illustrating the universality of this strategy.     

Van der Waals Heterostructures Comprised of Ultrathin Polymer Nanosheets for Efficient Z‐Scheme Overall Water Splitting

Inspired by natural photosynthesis, Z‐scheme photocatalytic systems are very appealing for achieving efficient overall water splitting. Developing metal‐free Z‐scheme photocatalysts for overall water splitting, however, still remains challenging. The construction of polymer‐based van der Waals heterostructures as metal‐free Z‐scheme photocatalytic systems for overall water splitting is described using aza‐fused microporous polymers (CMP) and C₂N ultrathin nanosheets as O₂‐ and H₂‐evolving catalysts, respectively. Although neither polymer is able to split pure water using visible light, a 2:1 stoichiometric ratio of H₂ and O₂ was observed when aza‐CMP/C₂N heterostructures were used. A solar‐to‐hydrogen conversion efficiency of 0.23 % was determined, which could be further enhanced to 0.40 % by using graphene as the solid electron mediator to promote the interfacial charge‐transfer process. This study highlights the potential of polymer photocatalysts for overall water splitting.     

Single‐Site Active Cobalt‐Based Photocatalyst with a Long Carrier Lifetime for Spontaneous Overall Water Splitting

An active and stable photocatalyst to directly split water is desirable for solar‐energy conversion. However, it is difficult to accomplish overall water splitting without sacrificial electron donors. Herein, we demonstrate a strategy via constructing a single site to simultaneously promote charge separation and catalytic activity for robust overall water splitting. A single Co₁‐P₄ site confined on g‐C₃N₄ nanosheets was prepared by a facile phosphidation method, and identified by electron microscopy and X‐ray absorption spectroscopy. This coordinatively unsaturated Co site can effectively suppress charge recombination and prolong carrier lifetime by about 20 times relative to pristine g‐C₃N₄, and boost water molecular adsorption and activation for oxygen evolution. This single‐site photocatalyst exhibits steady and high water splitting activity with H₂ evolution rate up to 410.3 μmol h⁻¹ g⁻¹, and quantum efficiency as high as 2.2 % at 500 nm.     

Fe‐Doped Ni3C Nanodots in N‐Doped Carbon Nanosheets for Efficient Hydrogen‐Evolution and Oxygen‐Evolution Electrocatalysis

Uniform Ni₃C nanodots dispersed in ultrathin N‐doped carbon nanosheets were successfully prepared by carburization of the two dimensional (2D) nickel cyanide coordination polymer precursors. The Ni₃C based nanosheets have lateral length of about 200 nm and thickness of 10 nm. When doped with Fe, the Ni₃C based nanosheets exhibited outstanding electrocatalytic properties for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). For example, 2 at % Fe (atomic percent) doped Ni₃C nanosheets depict a low overpotential (292 mV) and a small Tafel slope (41.3 mV dec⁻¹) for HER in KOH solution. An outstanding OER catalytic property is also achieved with a low overpotential of 275 mV and a small Tafel slope of 62 mV dec⁻¹ in KOH solution. Such nanodot‐incorporated 2D hybrid structures can serve as an efficient bifunctional electrocatalyst for overall water splitting.     

Doping‐Induced Amorphization,Vacancy, and Gradient Energy Band in SnS2 Nanosheet Arrays for Improved Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting is a promising strategy to convert solar energy into hydrogen fuel. However, the poor bulk charge‐separation ability and slow surface oxygen evolution reaction (OER) dynamics of photoelectrodes impede the performance. We construct In‐ and Zn/In‐doped SnS₂ nanosheet arrays through a hydrothermal method. The doping induces the simultaneous formation of an amorphous layer, S vacancies, and a gradient energy band. This leads to elevated carrier concentrations, an increased number of surface‐reaction sites, accelerated surface‐OER kinetics, and an enhanced bulk‐carrier separation efficiency with a decreased recombination rate. This efficient doping strategy allows to manipulate the morphology, crystallinity, and band structure of photoelectrodes for an improved PEC performance.     

Doping‐Induced Amorphization,Vacancy, and Gradient Energy Band in SnS2 Nanosheet Arrays for Improved Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting is a promising strategy to convert solar energy into hydrogen fuel. However, the poor bulk charge‐separation ability and slow surface oxygen evolution reaction (OER) dynamics of photoelectrodes impede the performance. We construct In‐ and Zn/In‐doped SnS₂ nanosheet arrays through a hydrothermal method. The doping induces the simultaneous formation of an amorphous layer, S vacancies, and a gradient energy band. This leads to elevated carrier concentrations, an increased number of surface‐reaction sites, accelerated surface‐OER kinetics, and an enhanced bulk‐carrier separation efficiency with a decreased recombination rate. This efficient doping strategy allows to manipulate the morphology, crystallinity, and band structure of photoelectrodes for an improved PEC performance.     

Ultrathin Spinel‐Structured Nanosheets Rich in Oxygen Deficiencies for Enhanced Electrocatalytic Water Oxidation

Electrochemical water splitting is a clean technology for H₂ fuels, but greatly hindered by the slow kinetics of the oxygen evolution reaction (OER). Herein, a series of spinel‐structured nanosheets with oxygen deficiencies and ultrathin thicknesses were designed to increase the reactivity and the number of active sites of the catalysts, which were then taken as an excellent platform for promoting the water oxidation process. Theoretical investigations showed that the oxygen vacancies confined in the ultrathin nanosheet could lower the adsorption energy of H₂O, leading to increased OER efficiency. As expected, the NiCo₂O₄ ultrathin nanosheets rich in oxygen vacancies exhibited a large current density of 285 mA cm^?2 at 0.8 V and a small overpotential of 0.32 V, both of which are superior to the corresponding values of bulk samples or samples with few oxygen deficiencies and even higher than those of most reported non‐precious‐metal catalysts. This work should provide a new pathway for the design of advanced OER catalysts.     

Controllable Synthesis of Hexagonal WO3 Nanoplates for Efficient Visible‐Light‐Driven Photocatalytic Oxygen Production

Facilitating charge‐carrier separation and transfer is fundamentally important to improve the photocatalytic performance of semiconductor materials. Herein, two‐dimensional hexagonal WO₃ nanoplates were synthesized by a two‐step route: rapid evaporation and solid‐phase sintering. The as‐prepared WO₃ exhibits an enhanced activity of photocatalytic water oxidation compared to bulk monoclinic WO₃. The electron dynamics analysis reveals that a more efficient charge‐carrier separation in the former can be obtained, the origin of which can be attributed to an increased number of surface defects in hexagonal WO₃ nanoplates. This work not only presents a novel and simple method to produce two‐dimensional hexagonal WO₃ nanoplates, but also demonstrates that surface defects and two‐dimensional geometric structures can promote the charge separation, which may be extended to the design of other efficient photocatalysts.     

Ultrathin FeSe2 Nanosheets: Controlled Synthesis and Application as a Heterogeneous Catalyst in Dye‐Sensitized Solar Cells

Two‐dimensional (2D) semiconducting nanosheets have emerged as an important field of materials, owing to their unique properties and potential applications in areas ranging from electronics to catalysis. However, the controlled synthesis of ultrathin 2D nanosheets remains a great challenge, due to the lack of an intrinsic driving force for anisotropic growth. High‐quality ultrathin 2D FeSe₂ nanosheets with average thickness below 7 nm have been synthesized on large scale by a facile solution method, and a formation mechanism has been proposed. Due to their favorable structural features, the as‐synthesized ultrathin FeSe₂ nanosheets exhibit excellent electrocatalytic activity for the reduction of triiodide to iodide and low charge‐transfer resistance at the electrolyte–electrode interface in dye‐sensitized solar cells (DSSCs). The DSSCs with FeSe₂ nanosheets as counter electrode material achieve a high power conversion efficiency of 7.53 % under a simulated solar illumination of 100 mW cm^?2 (AM 1.5), which is comparable with that of Pt‐based devices (7.47 %).     

ZnCr Layered Double Hydroxide (LDH) Nanosheets Assisted Formation of Hierarchical Flower‐Like CdZnS@LDH Microstructures with Improved Visible‐Light‐Driven H2 Production

The development of new semiconductor photocatalysts toward splitting water has supplied a promising way to obtain sustainable and clean hydrogen energy. Herein, CdZnS@layered double hydroxide (LDH) composites with a hierarchical flower‐like microstructure have been fabricated with the aid of ZnCr–LDH nanosheets as templates. XRD, SEM and HRTEM show that the ZnCr–LDH nanosheets are uniformly dispersed within the composites. The surface of the hierarchical structures is rough and composed of numerous nanocrystals of CdZnS. The HRTEM images indicate that the surface of CdZnS nanocrystals is mainly composed of the (111) plane. Moreover, the visible‐light‐driven H₂ production performance of the CdZnS in the presence and absence of ZnCr–LDH nanosheets has been measured. The results show that ZnCr–LDH nanosheets play an important role in the hierarchical morphology and photocatalytic activity of the as‐prepared samples. In the water‐splitting process, the visible‐light‐driven H₂‐production rate of hierarchical flower‐like CdZnS@LDH is 4.03 times and nearly 10 times higher than that of pristine CdZnS microsphere and pure commercial CdS, respectively. Therefore, this work not only achieves enhanced catalytic performance of the CdZnS by the introduction of ZnCr–LDH nanosheets, but also supplies an insight into the relationship between the hierarchical morphology and the semiconductor photocatalytic activity.     

Ultrathin SnO2 Scaffolds for TiO2‐Based Heterojunction Photoanodes in Dye‐Sensitized Solar Cells: Oriented Charge Transport and Improved Light Scattering

In this paper, band‐structure matching strategy of a TiO₂‐based heterojunction within which electrons can be collected from TiO₂ nanoparticles and transported rapidly in the bulk structure is reported. On the basis of the band‐structure analysis of different TiO₂‐based heterostructures, focus was directed to the SnO₂ nanosheet because of its appropriate band position and high electrical conductivity. Through a systematic investigation of the incorporation of ultrathin SnO₂ nanosheet scaffolds for TiO₂‐based photoanodes in dye‐sensitized solar cells (DSCs), we propose an anisotropy “constrained random walk” model to describe the controlled electron transit process. In this system, electrons are transferred orientedly overall, as well as randomly locally, leading to a significant reduction in the charge diffusion route compared to the conventional isotropic “random walk” model. In brief, the 2D ultrathin nanosheets provide rapid transit pathways and improved light‐scattering centers, which can ensure a sufficient amount of dye loading and slow recombination. An overall light‐to‐electricity conversion efficiency as high as 8.25 % is achieved by embedding the appropriate amount of SnO₂ scaffold in a TiO₂‐based photoanode.     

Few‐Layer Nanosheets of n‐Type SnSe2

Layered p‐block metal chalcogenides are renowned for thermoelectric energy conversion due to their low thermal conductivity caused by bonding asymmetry and anharmonicity. Recently, single crystalline layered SnSe has created sensation in thermoelectrics due to its ultralow thermal conductivity and high thermoelectric figure of merit. Tin diselenide (SnSe₂), an additional layered compound belonging to the Sn‐Se phase diagram, possesses a CdI₂‐type structure. However, synthesis of pure‐phase bulk SnSe₂ by a conventional solid‐state route is still remains challenging. A simple solution‐based low‐temperature synthesis is presented of ultrathin (3–5 nm) few layers (4–6 layers) nanosheets of Cl‐doped SnSe₂, which possess n‐type carrier concentration of 2×10¹⁸ cm^?3 with carrier mobility of about 30 cm² V^?1 s^?1 at room temperature. SnSe₂ has a band gap of about 1.6 eV and semiconducting electronic transport in the 300–630 K range. An ultralow thermal conductivity of about 0.67 Wm^?1 K^?1 was achieved at room temperature in a hot‐pressed dense pellet of Cl‐doped SnSe₂ nanosheets due to the anisotropic layered structure, which gives rise to effective phonon scattering.     

Generalized Low‐Temperature Fabrication of Scalable Multi‐Type Two‐Dimensional Nanosheets with a Green Soft Template

Two‐dimensional nanosheets with high specific surface areas and fascinating physical and chemical properties have attracted tremendous interests because of their promising potentials in both fundamental research and practical applications. However, the problem of developing a universal strategy with a facile and cost‐effective synthesis process for multi‐type ultrathin 2 D nanostructures remains unresolved. Herein, we report a generalized low‐temperature fabrication of scalable multi‐type 2 D nanosheets including metal hydroxides (such as Ni(OH)₂, Co(OH)₂, Cd(OH)₂, and Mg(OH)₂), metal oxides (such as ZnO and Mn₃O₄), and layered mixed transition‐metal hydroxides (Ni‐Co LDH, Ni‐Fe LDH, Co‐Fe LDH, and Ni‐Co‐Fe layered ternary hydroxides) through the rational employment of a green soft‐template. The synthesized crystalline inorganic nanosheets possess confined thickness, resulting in ultrahigh surface atom ratios and chemically reactive facets. Upon evaluation as electrode materials for pseudocapacitors, the Ni‐Co LDH nanosheets exhibit a high specific capacitance of 1087 F g^?1 at a current density of 1 A g^?1, and excellent stability, with 103 % retention after 500 cycles. This strategy is facile and scalable for the production of high‐quality ultrathin crystalline inorganic nanosheets, with the possibility of extension to the preparation of other complex nanosheets.     

Ultrathin Metal–Organic Framework Nanosheets with Ultrahigh Loading of Single Pt Atoms for Efficient Visible‐Light‐Driven Photocatalytic H2 Evolution

A surfactant‐stabilized coordination strategy is used to make two‐dimensional (2D) single‐atom catalysts (SACs) with an ultrahigh Pt loading of 12.0 wt %, by assembly of pre‐formed single Pt atom coordinated porphyrin precursors into free‐standing metal–organic framework (MOF) nanosheets with an ultrathin thickness of 2.4±0.9 nm. This is the first example of 2D MOF‐based SACs. Remarkably, the 2D SACs exhibit a record‐high photocatalytic H₂ evolution rate of 11 320 μmol g^?1 h^?1 via water splitting under visible light irradiation (λ>420 nm) compared with those of reported MOF‐based photocatalysts. Moreover, the MOF nanosheets can be readily drop‐casted onto solid substrates, forming thin films while still retaining their photocatalytic activity, which is highly desirable for practical solar H₂ production.     

Photoresponsive Nanosheets of Polyoxometalates Formed by Controlled Self‐Assembly Pathways

Anionic Keggin polyoxometalates (POMs) and ether linkage‐enriched ammonium ions spontaneously self‐assemble into rectangular ultrathin nanosheets in aqueous media. The structural flexibility of the cation is essential to form oriented nanosheets; as demonstrated by single‐crystal X‐ray diffraction measurements. The difference in initial conditions exerts significant influence on selecting for self‐assembly pathways in the energy landscape. Photoillumination of the POM sheets in pure water causes dissolution of reduced POMs, which allowed site‐specific etching of nanosheets using laser scanning microscopy. By contrast, photoetching was suppressed in aqueous AgNO₃ and site‐selective deposition of silver nanoparticles occurred as a consequence of electron transfer from the photoreduced POMs to Ag⁺ ions on the nanosheet surface.     

Single‐Crystalline Ultrathin Nickel Nanosheets Array from In Situ Topotactic Reduction for Active and Stable Electrocatalysis

Simultaneously synthesizing and structuring atomically thick or ultrathin 2D non‐precious metal nanocrystal may offer a new class of materials to replace the state‐of‐art noble‐metal electrocatalysts; however, the synthetic strategy is the bottleneck which should be urgently solved. Here we report the synthesis of an ultrathin nickel nanosheet array (Ni‐NSA) through in situ topotactic reduction from Ni(OH)₂ array precursors. The Ni nanosheets showed a single‐crystalline lamellar structure with only ten atomic layers in thickness and an exposed (111) facet. Combined with a superaerophobic (low bubble adhesive) arrayed structure the Ni‐NSAs exhibited a dramatic enhancement on both activity and stability towards the hydrazine‐oxidation reaction (HzOR) relative to platinum. Furthermore, the partial oxidization of Ni‐NSAs in ambient atmosphere resulted in effective water‐splitting electrocatalysts for the hydrogen‐evolution reaction (HER).     

Harvesting the Vibration Energy of BiFeO3 Nanosheets for Hydrogen Evolution

In this study, mechanical vibration is used for hydrogen generation and decomposition of dye molecules, with the help of BiFeO₃ (BFO) square nanosheets. A high hydrogen production rate of ≈124.1 μmol g^?1 is achieved under mechanical vibration (100 W) for 1 h at the resonant frequency of the BFO nanosheets. The decomposition ratio of Rhodamine B dye reaches up to ≈94.1 % after mechanical vibration of the BFO catalyst for 50 min. The vibration‐induced catalysis of the BFO square nanosheets may be attributed to the piezocatalytic properties of BFO and the high specific surface area of the nanosheets. The uncompensated piezoelectric charges on the surfaces of BFO nanosheets induced by mechanical vibration result in a built‐in electric field across the nanosheets. Unlike a photocatalyst for water splitting, which requires a proper band edge position for hydrogen evolution, such a requirement is not needed in piezocatalytic water splitting, where the band tilting under the induced piezoelectric field will make the conduction band of BFO more negative than the H₂/H₂O redox potential (0 V) for hydrogen generation.     

Well-defined BiOCl colloidal ultrathin nanosheets: synthesis,characterization, and application in photocatalytic aerobic oxidation of secondary amines

We demonstrate the first colloidal synthesis of single-crystalline BiOCl ultrathin nanosheets (UTNSs) that feature a well-defined square morphology. Unlike BiOCl nanomaterials prepared by hydrothermal routes, our colloidal BiOCl UTNSs exhibit hydrophobic surface properties and high activity and selectivity toward the photocatalytic aerobic oxidation of secondary amines to corresponding imines at room temperature. Hence, the application of BiOCl nanomaterials has been successfully extended from the widely studied photodecomposition of pollutants in aqueous solution to the synthesis of fine chemicals in organic solvent using a green approach.     

A Hydrogen‐Deficient Nickel–Cobalt Double Hydroxide for Photocatalytic Overall Water Splitting

Developing highly efficient and low‐cost photocatalysts for overall water splitting has long been a pursuit for converting solar power into clean hydrogen energy. Herein, we demonstrate that a nonstoichiometric nickel–cobalt double hydroxide can achieve overall water splitting by itself upon solar light irradiation, avoiding the consumption of noble‐metal co‐catalysts. We employed an intensive laser to ablate a NiCo alloy target immersed in alkaline solution, and produced so‐called L‐NiCo nanosheets with a nonstoichiometric composition and O^2?/Co³⁺ ions exposed on the surface. The nonstoichiometric composition broadens the band gap, while O^2? and Co³⁺ ions boost hydrogen and oxygen evolution, respectively. As such, the photocatalyst achieves a H₂ evolution rate of 1.7 μmol h^?1 under AM 1.5G sunlight irradiation and an apparent quantum yield (AQE) of 1.38 % at 380 nm.