1,2‐Bis(trifluoromethyl)ethene‐1,2‐dicarbonitrile: (2+2) Cycloadditions with Vinyl Ethers

The title compound (short version: BTE) occurs in (E)‐ and (Z)‐isomers (both with b.p. of ca. 100°) which equilibrate with nucleophilic catalysts. Both undergo (2+2) cycloadditions with methyl vinyl ether at 25°. Three stereogenic centers in the cyclobutanes led to four rac‐diastereoisomers, which were obtained in pure and crystalline state. The structures were elucidated by ¹⁹F‐NMR spectroscopy and confirmed by two X‐ray analyses. The cycloadditions were not stereospecific: e.g., (E)‐BTE furnished 73% trans‐adducts (with respect to the CF₃ groups) and 27% cis‐adducts. The loss of stereochemical integrity occurs in the intermediate gauche‐zwitterions which can cyclize or rotate, but not dissociate. Under extreme conditions (2M LiClO₄ in Et₂O, 70°, 3 months), the thermodynamic equilibrium of the four cyclobutanes was achieved. Considerations of Coulombic attraction and conformational strain in the zwitterionic intermediates allow us to rationalize the observed proportions of diastereoisomeric cyclobutanes. Ethyl vinyl ether and butyl vinyl ether furnished cyclobutanes in similar diastereoisomer ratios.     

Cationic polymerization of α,β-disubstituted olefins. Part 17. Effect of polymerization conditions on the reactivity of alkenyl ethers relative to vinyl ethers

In order to clarify the propagation reaction, vinyl ether was copolymerized with the corresponding alkenyl ether under various conditions. cis-Propenyl ether (cis-PE) was several times more reactive than trans-PE and the corresponding vinyl ether in the copolymerization catalyzed by BF₃ · O(C₂H₅)₂ in toluene. However, the reactivity of cis-PE relative to trans-PE and the vinyl ether was found to be greatly decreased with increasing polarity of the solvent and to be very close to unity in such polar solvents as nitroethane. On the other hand, the reactivity of trans-IBPE relative to IBVE was scarcely changed by polymerization conditions. Also, the nature of the initiator and polymerization temperature affect the reactivity of cis-PE relative to the vinyl ether. These phenomena were explained by the relative stability of the bridged and open car bonium ions based on the polarity of the solvent and steric hindrance due to substituents in the trans isomer.     

Structure and reactivity α,β-unsaturated ethers. II. Cationic copolymerizations of propenyl isobutyl ether

cis- and trans-Propenyl isobutyl ethers were copolymerized with each other and each with vinyl isobutyl ether separately under various conditions. In homogeneous polymerizations a cis-β-methyl substitution on vinyl isobutyl ether apparently enhanced the reactivity, whereas the trans substitution tended to reduce it slightly. In heterogeneous catalysis, on the other hand, a β-methyl group on the vinyl ether, whether cis or trans, greatly reduced the reactivity, probably because of the steric hindrance toward the adsorption of monomers on the catalyst surface. The relative reactivities of cis- and trans-propenyl isobutyl ethers ranged from 2 to 20, depending on the polymerization conditions. The polymer end formed from the cis monomer exhibited special steric effects. It was concluded that even in homogeneous media the rotation of the polymer end around the terminal carbon–carbon bond is restricted.     

Acyclic Palladium(II)‐N‐heterocyclic Carbene Metallacrown Ether Complexes: Synthesis,Structure and Catalytic Activity

Novel acyclic Pd(II)‐N‐heterocyclic carbene (NHC) metallacrown ethers 5a , 5b have been synthesized. Reaction of the imidazolium salts bearing a long polyether chain with Ag₂O afforded Ag‐NHC complexes, which then reacted as carbene transfer agent with PdCl₂(MeCN)₂ to give the desired acyclic Pd(II)‐NHC metallacrown ether complexes 5a and 5b . The ¹H NMR and ¹³C NMR spectra show 5a and 5b exist as mixtures of cis and trans isomers in solution. The trans isomer of 5a was characterized by X‐ray diffraction, which clearly demonstrated two pseudo‐crown ether cavities in trans‐ 5a . Pd(II)‐NHC complexes 5a and 5b have been shown to be highly effective in the Suzuki‐Miyaura reactions of a variety of aryl bromides in neat water without the need of inert gas protection.     

Compounds with bridgehead nitrogen. 44—the conformational analysis of perhydropyrido[1,2-c] [1,3]thiazine

The 270 MHz NMR data on trans- and cis-(H-4a, H-7)-7-ethylperhydropyrido[1,2-c][1,3]thiazine show heavy conformational bias to the trans- and S-inside cis-fused conformations, respectively. Comparison of the ¹³C NMR spectra of these anancomeric systems with the ¹³C NMR spectrum of perhydropyrido[1,2-c][1,3]thiazine indicates a trans-?S-inside cis-conformational equilibrium for the latter compound in CDCl₃ at 25°C, containing ca 75% trans-fused conformer. The ¹³C NMR spectrum of perhydropyrido[1,2-c][1,3]-thiazine at ?75°C showed 64% trans-fused conformer and 36% S-inside cis-conformer.     

Isomeric Effect on H/D Exchange of Resveratrol Studied by NMR Spectroscopy

Resveratrol (3,5,4′‐trihydroxylstilbene), a phytoalexin in response to injury or fungal attack, is found in grapes and other food products. It has been well documented that the compound has beneficial effects as hypolipidemic, anticancer, antiviral, neuroprotective, antiaging, and anti‐inflammatory natural active principle. It was observed that both trans‐ and cis‐resveratrols undergo hydrogen‐deuterium (H/D) exchange at H‐2,6 and H‐4 positions of the A‐ring. The exchange rates were determined by ¹H NMR spectroscopy. The results reveal that the exchange rates are configuration and pH dependent. Derivative of 2‐O‐β‐D‐glucoside can significantly speed up the H/D exchange reactions for both isomers. The trans‐resveratrol experiences faster H/D exchanging than the cis‐resveratrol. Such isomeric effect is possibly due to the factor that the trans‐resveratrol is in favor of forming larger/super conjugative system and has less spatial interference. Theoretical calculation shows that electronegativity at these positions is in the order of H‐2,6>H‐4, which is in consistent with the exchange rates observed by NMR. The results may be of help in understanding the properties of resveratrol, and in analysis of resveratrol in natural products or body fluids using mass spectroscopy that occasionally requires stable deuterium isotope labeling.     

NMR signal assignment of cis/trans‐conformational segments in MEH‐CN‐PPV

Poly[2‐(2′‐ethylhexyloxy)‐5‐methoxy‐1,4‐phenylene‐(1‐cyanovinylene)] MEH‐CN‐PPV and its all‐trans model compound 1,4‐bis(α‐cyanostyryl)‐2‐(2‐ethylhexyloxy)‐5‐methyloxybenzene were synthesized via Knoevenagel condensation. All‐cis isomer and cis–trans isomer of 1,4‐bis(α‐cyanostyryl)‐2‐(2‐ethylhexyloxy)‐5‐methyloxybenzene were prepared by the photoisomerization reaction. Comparison of the ¹H NMR spectra between MEH‐CN‐PPV and three model compounds proved the occurrence of cis‐vinylene in the backbone of MEH‐CN‐PPV. According to the ratio between the cis‐vinylene signal and trans‐vinylene signal, the content of the cis‐vinylene could be estimated to be 15% in MEH‐CN‐PPV. This large cis‐vinylene content came from the rapid photochemical isomerization of cyanovinylene and was likely relative to the poor electroluminescence property of MEH‐CN‐PPV. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1105–1113, 2008     

2‐Hydroxyazobenzenes to Tailor pH Pulses and Oscillations with Light

This paper evaluates the 2‐hydroxyazobenzene platform for tailoring proton concentration pulses and oscillations with monochromatic light. The easily prepared 2‐hydroxyazobenzenes exhibit large absorptions in the near‐UV range. Photoisomerization was investigated by UV/Vis absorption, ¹H NMR spectroscopy, and steady‐state fluorescence emission. In the whole investigated series, the trans stereoisomer of the 2‐hydroxyazobenzene motif provides the corresponding cis derivative with an action cross section in the 10³ M ^?1 cm^?1 range. At the same time, photoisomerization is accompanied by a significant pK drop of the phenol group. According to the phenyl‐substituent pattern, cis‐to‐trans thermal back‐isomerization can be tuned in the 10 ms–100 s range. Up to 2 units of reversible pH drops or pH oscillations on the 10 s timescale have been obtained by appropriately tailoring single‐wavelength illumination of 2‐hydroxyazobenzene solutions.     

Isomerisation of perfluoro(alkenyl vinyl ether) with terminal double bond

Isomerization of perfluoro(5-vinyloxy)pent-1-ene by potassium and cesium fluoride action was examined. Products of isomerization, a mixture of cis-and trans-isomers of vinyl ether with an internal double bond, and cyclic structures were identified by ¹⁹F NMR spectroscopy.     

Preparation of 2‐phenyl‐2‐hydroxymethyl‐4‐oxo‐1,2,3,4‐tetrahydroquinazoline and 2‐methyl‐4‐oxo‐3,4‐dihydroquinazoline derivatives formation

The cyclization of phenacyl anthranilate has been studied with the aim to develop the synthesis of 2‐(2′‐aminophenyl)‐4‐phenyloxazole. However, a different course of the reaction than expected was observed. 2‐Phenyl‐2‐hydroxymethyl‐4‐oxo‐1,2,3,4‐tetrahydroquinazoline ( 3a ) was formed by the reaction of phenacyl anthranilate ( 2 ) with ammonium acetate under various conditions. 3‐Hydroxy‐2‐phenyl‐4(1H)‐quinolinone ( 4 ) arose by heating compound 3a in acetic acid. The same compound was obtained by melting compound 3a , but the yield was lower. Different types of products resulted in the reaction of compound 3a with acetic anhydride. Under mild conditions acetylated products 2‐acetoxymethyl‐2‐phenyl‐4‐oxo‐1,2,3,4‐tetrahydroquinazoline ( 7a ) and 2‐acetoxymethyl‐3‐acetyl‐2‐phenyl‐4‐oxo‐1,2,3,4‐tetrahydroquinazoline ( 8 ) were prepared. If the reaction was carried out under reflux of the reaction mixture, molecular rearrangement took place to give cis and trans 2‐methyl‐4‐oxo‐3‐(1‐phenyl‐2‐acetoxy)vinyl‐3,4‐dihydroquinazolines ( 9a and 9b ). All prepared compounds have been characterised by their ¹H, ¹³C and ¹⁵N NMR spectra, IR spectra and MS.     

Synthesis and Elaboration of All‐cis‐1,2,4,5‐Tetrafluoro‐3‐Phenylcyclohexane: A Polar Cyclohexane Motif

A stereocontrolled synthesis of all‐cis‐1,2,4,5‐ tetrafluoro‐3‐phenylcyclohexane is developed as the first functionalised example of this polar cyclohexane motif. The dipolar nature of the ring, arising due to two 1,3‐diaxial C?F bonds, is revealed in the solid‐state (X‐ray) structure. The orthogonal conformation of the aryl and cyclohexyl rings in all‐cis‐1,2,4,5‐tetrafluoro‐3‐phenylcyclohexane, and in an ortho‐nitro derivative, result in intramolecular ^1hJ_HF and ^2hJ_CF NMR couplings relayed through hydrogen bonding. The aryl group of all‐cis‐1,2,4,5‐tetrafluoro‐3‐phenylcyclohexane is elaborated in different ways to demonstrate the versatility of this compound for delivering the motif to a range of molecular building blocks.     

Ruthenium Lewis Acid‐Catalyzed Asymmetric Diels–Alder Reactions: Reverse‐Face Selectivity for α,β‐Unsaturated Aldehydes and Ketones

Acrolein, methacrolein, methyl vinyl ketone, ethyl vinyl ketone, 3‐methyl‐3‐en‐2‐one, and divinyl ketone were coordinated to a cationic cyclopentadienyl ruthenium(II) Lewis acid incorporating the electron‐poor bidentate BIPHOP–F ligand. Analysis by NOESY and ROESY NMR techniques allowed the determination of conformations of enals and enones present in solution in CD₂Cl₂. The results were compared to solid‐state structures and to the facial selectivities of catalytic asymmetric Diels–Alder reactions with cyclopentadiene. X‐Ray structures of four Ru‐enal and Ru‐enone complexes show the α,β‐unsaturated C=O compounds to adopt an anti‐s‐trans conformation. In solution, enals assume both anti‐s‐trans and anti‐s‐cis conformations. An additional conformation, syn‐s‐trans, is present in enone complexes. Enantioface selectivity in the cycloaddition reactions differs for enals and enones. Reaction products indicate enals to react exclusively in the anti‐s‐trans conformation, whereas with enones, the major product results from the syn‐s‐trans conformation. The alkene in s‐cis conformations, while present in solution, is shielded and cannot undergo cycloaddition. A syn‐s‐trans conformation is found in the solid state of the bulky 6,6‐dimethyl cyclohexanone‐Ru(II) complex. The X‐ray structure of divinyl ketone is unique in that the Ru(II) center binds the enone via a η² bond to one of the alkene moieties. In solution, coordination to Ru–C=O oxygen is adopted. A comparison of facial preference is also made to the corresponding indenyl Lewis acids.     

Stereoelective cationic polymerization of propenyl ether by asymmetric catalysts

In order to elucidate the possibility of stereoelective cationic polymerization (asymmetric selective polymerization) of olefinic monomers, racemic cis- and trans-1-methylpropyl propenyl ether and racemic 1-methylpropyl vinyl ether were polymerized by asymmetric alkoxyaluminum dichlorides. In the polymerization of racemic cis-1-methylpropyl propenyl ether with (?)-menthoxyaluminum dichloride in toluene at ?78°C, the polymer obtained showed a positive optical activity, and the residual monomers were converted by BF₃OEt₂ into a polymer having a negative optical activity. Thus, the stereoelective polymerization of racemic cis-1-methylpropyl propenyl ether was beyond any doubt attained in homogeneous cationic polymerization. In the polymerization of the trans isomer by the same catalyst, an optically active polymer was hardly formed. In the polymerization of racemic 1-methylpropyl vinyl ether which has no β-methyl group, stereoelectivity was not observed at all. The cis-1-methylpropyl propenyl ether did not produce an optical active polymer in the polymerization catalyzed by (S)-1-methylpropoxyaluminum dichloride or (S)-2-methylbutoxyaluminum dichloride under the same polymerization conditions.     

Structure and reactivity of α,β-unsaturated ethers. III. Cationic copolymerizations of alkenyl alkyl ethers

The relative cationic polymerizabilities of the geometrical isomers of various alkenyl alkyl ethers were studied both in copolymerizations with each other and in their respective copolymerizations with vinyl isobutyl ether as standard. Copolymerizations were carried out in methylene dichloride at ?78°C. with boron trifluoride etherate as catalyst. The cis isomers have been found to be more reactive than the corresponding trans isomers. A primary alkyl substituent on the β-cis position of vinyl ethyl ether enhances the reactivity. Yet the steric effect is noticeable when the substituents are bulky. Compounds substituted with cis-β-isobutyl and with β-dimethyl showed little tendency to homopolymerization. It was proved that the polymer ends derived from cis and from trans monomers are respectively different in character because of the restricted rotation of the end unit around the terminal carbon–carbon bond. The alternation tendency, remarkable in the copolymerization of cis monomers with vinyl ether, was explained in terms of the cis-opening mechanism.     

Identification and quantification of cis and trans isomers in aminophenyl double‐decker silsesquioxanes using 1H–29Si gHMBC NMR

Cis and trans isomers of a series of double‐decker silsesquioxanes (DDSQ) were characterized by two‐dimensional NMR techniques. The ¹H NMR spectra of these species have not previously been assigned to a degree that allows for quantification. Thus, ¹H–²⁹Si HMBC correlations were applied to facilitate ¹H spectral assignment and also to confirm previous ²⁹Si assignments for this class of silsesquioxanes. With the ability to identify all the pertinent resonances of the ¹H NMR spectrum, ²⁹Si NMR is no longer required for quantification and required only for characterization. This not only saves time and material but also provides a more accurate quantification, thus allowing for the ratio of cis and trans isomers present in each compound to be determined. A more accurate measure of the cis/trans ratio enables the investigation of its influence on the physical and chemical properties of DDSQ nanostructured materials. Copyright © 2013 John Wiley & Sons, Ltd.     

Trans-cis isomerization of 4-(2-(9-anthryl)vinyl) pyridine.Molecular structures and ~1H NMR kinetic studies

Both cis- and trans-isomers of 4-(2-(9-anthryl)vinyl)pyridine were isolated and their molecular structures established by X-ray crystallographic method. Variable temperature 1H NMR spectroscopy was used to study the trans to cis isomerization of the title compound. The kinetic study of the reaction was based on the ratio of the NMR integration heights in toluene-d8 of the double doublet due to the cis-isomer at δ 8.51 to that of the multiplet at δ 8. 15 which was kept constant during the whole experiment. The isomerization process was found to be first order and the Arrhenius activation parameters Ea , In A ,△ H≠ and △ S≠ were calculated as 27.84kJ/mol, 6.71, 25.23 kJ/mol and - 197.89 J/(K·mol) , respectively. Besides,conformational analyses of both compounds based on molecular modelling were carried out and the results were used to compare with the experimental data.     

Dinuclear Tin(II) Complex of a Bulky cis‐Oxamide: Synthesis,Characterization, Crystal Structure,and DFT Studies

The reaction of the di‐lithiated oxamide of 1 with two equivalents of SnCl₂ provided the tin trans‐oxamide 3 . In solution, spectroscopic analysis suggests exclusively the formation of a trans‐oxamide (trans‐ 3 ). However, the solid state shows an atypical cis‐oxamide (cis‐ 3 ), where the oxamide fragment acts as an anti‐Janus head ligand. An ¹¹⁹Sn‐NMR variable temperature experiment ([D₈]THF) of the trans‐oxamide (trans‐ 3 ) was performed however, at lower temperature no additional signal was observed, which confirmed the absence of a dynamic equilibrium. Dispersion‐corrected density functional calculations revealed that the cis conformation of this tin(II) oxamide complex is more stable than the trans isomer by 1.4 kcal · mol^–1.     

Diastereoselective Alkylation of a Proline‐Derived Bicyclic Lactim Ether

N‐Boc‐protected L ‐proline ( 6 ) was converted into the bicyclic lactim ether (8aS)‐6,7,8,8a‐tetrahydro‐1‐methoxypyrrolo[1,2‐a]pyrazin‐4(3H)‐one ( 5 ) in four steps (Scheme 1). Deprotonation with LDA or LHMDS and subsequent alkylation resulted in the diastereoisomeric products cis‐ and trans‐ 9 . The diastereoselectivity was mainly dependent on the electrophile. Whereas small alkyl halides gave preferably cis‐ 9 , sterically more‐demanding alkyl halides resulted in cis/trans mixtures. Electrophiles bearing a π‐system favored the trans‐products 9 . Some isolated cis‐ and trans‐lactim ethers 9 were converted to the corresponding diketopiperazines cis‐ and trans‐ 10 by acid hydrolysis. The structures and configurations of several compounds were confirmed by NMR and NOE experiments, as well as by X‐ray crystallography (Figs. 1–4).     

Radical copolymerization of 2‐trifluoromethylacrylic monomers. II. Kinetics,monomer reactivities,and penultimate effect in their copolymerization with norbornenes and vinyl ethers

Radical copolymerizations of electron‐deficient 2‐trifluoromethylacrylic (TFMA) monomers, such as 2‐trifluoromethylacrylic acid and t‐butyl 2‐trifluoromethylacrylate (TBTFMA), with electron‐rich norbornene derivatives and vinyl ethers with 2,2′‐azobisisobutyronitrile as the initiator were investigated in detail through the analysis of the kinetics in situ with ¹H NMR and through the determination of the monomer reactivity ratios. The norbornene derivatives used in this study included bicyclo[2.2.1]hept‐2‐ene (norbornene) and 5‐(2‐trifluoromethyl‐1,1,1‐trifluoro‐2‐hydroxylpropyl)‐2‐norbornene. The vinyl ether monomers were ethyl vinyl ether, t‐butyl vinyl ether, and 3,4‐dihydro‐2‐H‐pyran. Vinylene carbonate was found to copolymerize with TBTFMA. Although none of the monomers underwent radical homopolymerization under normal conditions, they copolymerized readily, producing a copolymer containing 60–70 mol % TFMA. The copolymerization of the TFMA monomer with norbornenes and vinyl ethers deviated from the terminal model and could be described by the penultimate model. The copolymers of TFMA reported in this article were evaluated as chemical amplification resist polymers for the emerging field of 157‐nm lithography. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1478–1505, 2004