Thioamide‐Directed Cobalt(III)‐Catalyzed Selective Amidation of C(sp3)−H Bonds

A mild, oxidant‐free, and selective Cp*Co^III‐catalyzed amidation of thioamides with robust dioxazolone amidating agents via C(sp³)−H bond activation to generate the desired amidated products is reported. The method is efficient and allows for the C−H amidation of a wide range of functionalized thioamides with aryl‐, heteroaryl‐, and alkyl‐substituted dioxazolones under the Cp*Co^III‐catalyzed conditions. The observed regioselectivity towards primary C(sp³)−H activation is supported by computational studies and the cyclometalation is proposed to proceed by means of an external carboxylate‐assisted concerted metalation/deprotonation mechanism. The reported method is a rare example of the use of a directing group other than the commonly used pyridine and quinolone classes for Cp*Co^III‐catalyzed C(sp³)−H functionalization and the first to exploit thioamides.     

O,O-Diethyl dithiophosphoric acid mediated direct synthesis of thioamides from aldehydes and ketones

A general and convenient method for a one-pot conversion of aldehydes and ketones into thioamides has been developed. The protocol involves oximation of aldehydes and ketones followed by deoxygenative thioamidation of oximes with O,O-diethyl dithiophosphoric acid which acts as an acid as well a source of sulfur. The method is operationally simple, high yielding, and also applicable to the conversion of amides and nitriles into the corresponding thioamides.     

Synthesis of N‐Glycoside Analogs via Thionolactones

Indolyl N‐glycoside analogs were obtained by a two‐step sequence via indole N‐thioamides. Treatment of thionobutyrolactone with indolylmagnesium bromide provides the corresponding indole N‐thioamide. The use of 10:1 toluene:THF as solvent is important in favoring N‐ over C3‐acylation. Treatment of the ω‐hydroxythioamide with 2 equiv of Meerwein's reagent followed by sodium borohydride gives the corresponding N‐(tetrahydrofuranyl)indole. Addition of carbon nucleophiles gives access to ketose nucleoside analogs, while activation of the ω‐hydroxyl group can give access to tetrahydrothiophene N‐glycosides.     

The Conjugate Addition-Cyclization of 3-Oxoacid Thioanilides to β-Nitrostyrenes. An Efficient Synthesis of Functionalized Thiophenes and their Transformation to Pyrroles

Summary. A new and simple method for synthesis of 2-, 3-, and 4-pyridylcarbonyl-2-aryliminothiophene derivatives based on the conjugate addition-cyclization of 3-oxoacid thioamides to β-nitrostyrenes was developed. Thiophene derivatives in acidic medium undergo ring transformation yielding corresponding pyrroles.     

A Simple and Convenient Method for the Synthesis of 3,5‐disubstituted 1,2,4‐thiadiazoles via Oxidative Dimerization of Primary Thioamides

A simple and efficient protocol has been developed for the preparation of 3,5‐diaryl‐1,2,4‐thiadiazoles in high yields through the oxidative dimerization of primary thioamides in aqueous medium at room temperature.     

Green protocol for synthesis of the 3,5-disubstituted 1,2,4-thiadiazoles using N-benzyl-DABCO-tribromide in aqueous media

A novel and simple method for rapid conversion of thioamides to the corresponding 1,2,4-thiadiazole derivatives was developed. It was shown that, thioamides undergo clean and efficient oxidation and cyclization in their conversion to 1,2,4-thiadiazoles using N-benzyl-DABCO-tribromide in wet solid-solid conditions.     

Facile Synthesis of Thioamides via P2S5‐Mediated Beckmann Rearrangement of Oximes

A facile and efficient approach to the synthesis of secondary thioamides from ketoximes via Beckmann rearrangement has been established, using phosphorus pentasulfide as a dehydrating and thiating agent. It is also efficient for the preparation of primary thiobenzamide from benzaldoxime. This approach features simple‐operation, easy‐control and good to excellent yields.     

Synthesis and Use of 2H‐Azirin‐3‐amines as Dipeptide Synthons

The synthesis of the new 2H‐azirin‐3‐amines (‘3‐amino‐2H‐azirines') 11, 20, 28 , and 33 as dipeptide synthons is described. The reactions of the starting amides with Lawesson reagent gave the corresponding thioamides, and consecutive treatment with COCl₂, 1,4‐diazabicyclo[2.2.2]octane (DABCO), and NaN₃ led to the desired products. It is shown that these 2H‐azirin‐3‐amines can conveniently be used as building blocks of the dipeptides Aib‐(Me)Axx (Axx=alanine, valine), Aib‐Homoproline, and Iva‐Pro in the synthesis of several model peptides. However, some limitations apply for the synthesis of such 2H‐azirin‐3‐amines. The starting material for the azirine synthesis, the corresponding thioamides, cannot generally be synthesized, and the 2H‐azirin‐3‐amines could not be obtained in all cases from the thioamides prepared.     

Synthesis of 1,3-benzothiazines by intramolecular dehydrogenative C–S cross-coupling in a flow electrolysis cell

Dehydrogenative cyclization of thioamides is an attractive approach for the synthesis of S-heterocycles. Reported herein is an electrochemical dehydrogenative cyclization reaction of N-benzyl thioamides in a flow electrolysis cell. The continuous-flow electrosynthesis has addressed the limitations associated with previously reported methods for the cyclization of alkylthioamides and provide a transition metal-and oxidizing reagent-free access to various functionalized 1,3-benzothiazines in good yields.     

Intermediate carbene formation in the reaction of thioamides with phosphorus (III) derivatives: Quantum chemical investigation

The reactions of perfluoroalkyl thioamides with trimethyl phosphine, trimethyl phosphite, and tris(dimethylamino)phosphine have been analyzed by means of quantum chemical (DFT and MP2) calculations. The reaction seems to proceed via the nucleophilic attack of the electrophilic carbon atom by the phosphorus lone pair with the formation of cyclic or acyclic adducts. The latter releases the thiophosphate molecule forming perfluoroalkylaminocarbene as the short‐lived intermediate. The reaction of the carbene with the second molecule of trialkyl phosphite yields phosphorus ylide. The ylide undergoes a migration of fluorine from carbon to phosphorus. The reactions of perfluoroalkyl thioamides with phosphines and tris(dimethylamino)phosphine probably proceeds differently. Using alkyl thioamides or amides instead of perfluoroalkyl thioamides also makes the reaction less favorable. The only combination of perfluoroalkyl thioamides with trialkyl phosphite fulfills both the kinetic requirements (moderate activation energies and relative energies for intermediates) and the thermodynamic aspects (higher stabilities of the reaction products compared with the starting materials). © 2013 Wiley Periodicals, Inc.     

Manganese-Catalyzed Hydrogenative Desulfurization of Thioamides

Earth-abundant transition metal catalysis has emerged as an important alternative to noble transition metal catalysis in hydrogenation reactions. However, there has been no Earth-abundant transition metal catalyzed hydrogenation of thioamides reported so far, presumably due to the poisoning of catalysts by sulfur-containing molecules. Herein, we described the first manganese-catalyzed hydrogenative desulfurization of thioamides to amines or imines. The key to success is the use of MnBr(CO)₅ instead of commonly-employed pincer-manganese catalysts, together with simple NEt₃ and CuBr. This protocol features excellent selectivity on sole cleavage of the C=S bond of thioamides, in contrast to the only known Ru-catalyzed hydrogenation of thioamides, and unprecedented chemo-selectivity tolerating vulnerable functional groups such as nitrile, ketone, aldehyde, ester, sulfone, nitro, olefin, alkyne and heterocycle, which are usually susceptible to common hydride-type reductive protocols.     

Facile access to γ-aminothiols from 1,3-thiazines via a microwave-assisted three-component reaction

A new efficient and general synthetic methodology to access γ-aminothiols was investigated and developed. 1,3-Thiazines were used as convenient precursors and were prepared by a fast microwave-assisted three-component reaction (3CR) of thioamides, aldehydes, and alkenes. The transformation of thiazines into aminothiols was achieved via a thiazinium salt hydrolysis, in three very facile steps.     

tert-Butyl nitrite induced radical dimerization of primary thioamides and selenoamides at room temperature

A simple and efficient method for the dimerization of primary thioamides into 1,2,4-thiadiazoles using tert-butyl nitrite is described. The optimized condition was also found to be suitable for the dimerization of benzoselenoamides into 1,2,4-selenadiazoles. All the reactions proceed smoothly at room temperature and gave the desired products in excellent yields in a short span of time.     

Copper-catalyzed chemoselective cross-coupling reaction of thioamides and α-diazocarbonyl compounds: Synthesis of enaminones

The development of operationally simple and cost-effective methods for CC bond formation reactions are highly important in pharmaceutical, agrochemical and material research. In this article we describe the first copper-catalyzed cross-coupling reaction of thioamides with acceptor/acceptor-substituted and acceptor-only substituted α-diazocarbonyl compounds to yield enaminones. The reaction shows broad substrate scope in terms of thioamides and diazocarbonyl compounds. Primary, secondary and tertiary thioamides all give enanminones when reacted with α-diazodiesters, α-diazoketoesters, α-diazodiketones, α-diazoketoamides, α-diazoesteramides, α-diazoketosulfones and α-diazomonoketones.     

Heterocyclization of derivatives of thioncarboxylic acids to 1,3,4-thiadiazoles under the action of tert-butyl hypochlorite

A method for synthesis of 2-alkyl-5-aryl- and 2,5-diaryl-1,3,4-thiadiazoles by successive reaction of thioamides with tert-butyl hypochlorite and benzothiohydrazides was developed. The first step in the formation of 1,3,4-thiadiazoles consists of oxidation of thioamides with tert-butyl hypochlorite with O atom transfer to the S atom, which was established by transformation of N-methyl-thiobutanamide into N-(methylimino)butanesulfenic acid.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 8, pp. 1843–1848, August, 1989.     

Fe3O4@vitamin B1 as a sustainable superparamagnetic heterogeneous nanocatalyst promoting green synthesis of trisubstituted 1,3‐thiazole derivatives

Fe₃O₄@vitamin B₁ was designed and prepared as an inexpensive and efficient heterogeneous nanocatalyst for the synthesis of new 1,3‐thiazol derivatives. The structure of the nanomagnetic catalyst was comprehensively characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, energy‐dispersive X‐ray spectroscopy, vibrating sample magnetometry and thermogravimetric analysis. The three‐component, one‐pot condensation of arylglyoxal monohydrate, cyclic 1,3‐dicarbonyls and thioamides in water as a green solvent was applied for the preparation of 1,3‐thiazol derivatives. Simple preparation of the catalyst from commercially available materials, high catalytic activity, simple operation, short reaction times, high yields and use of green solvent are some advantages of this protocol. The superparamagnetic nanocatalyst is magnetically separable and retains its stability after recycling for at least five consecutive runs without detectable activity loss.     

Pd-catalyzed allylic alkylation of thioamides

This work describes the first Pd-catalyzed allylic alkylation of thioamides. Various thioamides were efficiently α-allylated in high yields and with excellent selectivity for monoallylation under mild reaction conditions. The process not only provides a facile method for the synthesis of functionalized thioamides, but also presents a useful transformation for synthetically important thioamides.     

Rapid,Traceless, AgI‐Promoted Macrocyclization of Peptides Possessing an N‐Terminal Thioamide

Peptide macrocyclization is often a slow process, plagued by epimerization and cyclodimerization. Herein, we describe a new method for peptide macrocyclization employing the Ag^I‐promoted transformation of peptide thioamides. The Ag^I has a dual function: chemoselectively activating the thioamide and tethering the N‐terminal thioamide to the C‐terminal carboxylate. Extrusion of Ag₂S generates an isoimide intermediate, which undergoes acyl transfer to generate the native cyclic peptide, resulting in a rapid, traceless macrocylization process. Cyclic peptides are furnished in high yields within 1 hour, free of epimerization and cyclodimerization.     

Rapid,Traceless, AgI‐Promoted Macrocyclization of Peptides Possessing an N‐Terminal Thioamide

Peptide macrocyclization is often a slow process, plagued by epimerization and cyclodimerization. Herein, we describe a new method for peptide macrocyclization employing the Ag^I‐promoted transformation of peptide thioamides. The Ag^I has a dual function: chemoselectively activating the thioamide and tethering the N‐terminal thioamide to the C‐terminal carboxylate. Extrusion of Ag₂S generates an isoimide intermediate, which undergoes acyl transfer to generate the native cyclic peptide, resulting in a rapid, traceless macrocylization process. Cyclic peptides are furnished in high yields within 1 hour, free of epimerization and cyclodimerization.     

Synthetic applications of 2-chlorooxiranes: preparation of thiazoles,dihydrothiazoles and selenazoles

The reaction of 2-chlorooxiranes 1 with thioamides and thioureas provides access to thiazoles, 4-hydroxy-4,5-dihydrothiazoles and 2-imino-2,3-dihydrothiazoles under mild conditions and with excellent yields. With 1 and selenourea, near quantitative yields of selenazoles are obtained.