(–)‐epi‐Inosose‐2

The structure of the title compound, C₆H₁₀O₆, was determined to confirm the position of the keto group in the mol­ecule prepared enantioselectively by a bioconversion from myo‐inositol. There are two independent mol­ecules showing similar geometry.     

Cocrystals of 6‐methyl‐2‐thiouracil: presence of the acceptor–donor–acceptor/donor–acceptor–donor synthon

The results of seven cocrystallization experiments of the antithyroid drug 6‐methyl‐2‐thiouracil (MTU), C₅H₆N₂OS, with 2,4‐diaminopyrimidine, 2,4,6‐triaminopyrimidine and 6‐amino‐3H‐isocytosine (viz. 2,6‐diamino‐3H‐pyrimidin‐4‐one) are reported. MTU features an ADA (A = acceptor and D = donor) hydrogen‐bonding site, while the three coformers show complementary DAD hydrogen‐bonding sites and therefore should be capable of forming an ADA/DAD N—H...O/N—H...N/N—H...S synthon with MTU. The experiments yielded one cocrystal and six cocrystal solvates, namely 6‐methyl‐2‐thiouracil–2,4‐diaminopyrimidine–1‐methylpyrrolidin‐2‐one (1/1/2), C₅H₆N₂OS·C₄H₆N₄·2C₅H₉NO, (I), 6‐methyl‐2‐thiouracil–2,4‐diaminopyrimidine (1/1), C₅H₆N₂OS·C₄H₆N₄, (II), 6‐methyl‐2‐thiouracil–2,4‐diaminopyrimidine–N,N‐dimethylacetamide (2/1/2), 2C₅H₆N₂OS·C₄H₆N₄·2C₄H₉NO, (III), 6‐methyl‐2‐thiouracil–2,4‐diaminopyrimidine–N,N‐dimethylformamide (2/1/2), C₅H₆N₂OS·0.5C₄H₆N₄·C₃H₇NO, (IV), 2,4,6‐triaminopyrimidinium 6‐methyl‐2‐thiouracilate–6‐methyl‐2‐thiouracil–N,N‐dimethylformamide (1/1/2), C₄H₈N₅⁺·C₅H₅N₂OS⁻·C₅H₆N₂OS·2C₃H₇NO, (V), 6‐methyl‐2‐thiouracil–6‐amino‐3H‐isocytosine–N,N‐dimethylformamide (1/1/1), C₅H₆N₂OS·C₄H₆N₄O·C₃H₇NO, (VI), and 6‐methyl‐2‐thiouracil–6‐amino‐3H‐isocytosine–dimethyl sulfoxide (1/1/1), C₅H₆N₂OS·C₄H₆N₄O·C₂H₆OS, (VII). Whereas in cocrystal (I) an R₂²(8) interaction similar to the Watson–Crick adenine/uracil base pair is formed and a two‐dimensional hydrogen‐bonding network is observed, the cocrystals (II)–(VII) contain the triply hydrogen‐bonded ADA/DAD N—H...O/N—H...N/N—H...S synthon and show a one‐dimensional hydrogen‐bonding network. Although 2,4‐diaminopyrimidine possesses only one DAD hydrogen‐bonding site, it is, due to orientational disorder, triply connected to two MTU molecules in (III) and (IV).     

Barium(II)–2,4‐dinitrophenolate–18‐crown‐6 at 183 K

The title compound, bis(2,4‐dinitrophenolato‐κ²O,O′)(1,4,7,10,13,16‐hexaoxadecane‐κ⁶O)barium(II), [Ba(C₆H₃N₂O₅)₂(C₁₂H₂₄O₆)], is a 1:1 complex of barium(II)–2,4‐di­nitro­phenolate and 1,4,7,10,13,16‐hexaoxa­cyclo­octa­decane (18‐crown‐6). Its structure is located on a crystallographic inversion centre. The temperature dependence of the crystal structure has been studied. The monoclinic β angle of the P2₁/­n space group increases with increasing temperature. The packing structure of the complex is stabilized by intermolecular C—H?O interactions.     

1,2‐Diaza‐3‐silacyclopent‐5‐ene – Synthese und Reaktionen

1,2‐Diaza‐3‐silacyclopent‐5‐ene – Synthesis and Reactions The dilithium salt of bis(tert‐butyl‐trimethylsilylmethylen)ketazine ( 1 ) forms an imine‐enamine salt. 1 reacts with halosilanes in a molar ratio of 1:1 to give 1,2‐diaza‐3‐silacyclopent‐5‐enes. Me₃SiCH=CCMe₃ [N(SiR,R′)‐N=C‐C]HSiMe₃ ( 2 ‐ 7 ). ( 2 : R,R′ = Cl; 3 : R = CH₃, R′ = Ph; 4 : R = F, R′ = CMe₃; 5 : R = F, R′ = Ph; 6 : R = F, R′ = N(SiMe₃)₂; 7 : R = F, R′ = N(CMe₃)SiMe₃). In the reaction of 1 with tetrafluorosilane the spirocyclus 8 is isolated. The five‐membered ring compounds 2 ‐ 7 and compound 9 substituted on the silicon‐fluoro‐ and (tert‐butyltrimethylsilyl) are acid at the C(4)‐atom and therefore can be lithiated. Experiments to prepare lithium salts of 4 with MeLi, n‐BuLi and PhLi gave LiF and the substitution‐products 10 ‐ 12 . 9 forms a lithium salt which reacts with ClSiMe₃ to give LiCl and the SiMe₃ ring system ( 13 ) substituted at the C(4)‐atom. The ring compounds 3 ‐ 7 and 10 ‐ 12 form isomers, the formation is discussed. Results of the crystal structure and analyses of 8 , 10 , 12 , and 13 are presented.     

The first 3′:5′‐cyclic nucleotide–amino acid complex: l‐His–cIMP

In the crystal structure of the l ‐His–cIMP complex, i.e.l ‐histidinium inosine 3′:5′‐cyclic phosphate [systematic name: 5‐(2‐amino‐2‐carboxyethyl)‐1H‐imidazol‐3‐ium 7‐hydroxy‐2‐oxo‐6‐(6‐oxo‐6,9‐dihydro‐1H‐purin‐9‐yl)‐4a,6,7,7a‐tetrahydro‐4H‐1,3,5,2λ⁵‐furo[3,2‐d][1,3,2λ⁵]dioxaphosphinin‐2‐olate], C₆H₁₀N₃O₂⁺·C₁₀H₁₀N₄O₇P⁻, the Hoogsteen edge of the hypoxanthine (Hyp) base of cIMP and the Hyp face are engaged in specific amino acid–nucleotide (His...cIMP) recognition, i.e. by abutting edge‐to‐edge and by π–π stacking, respectively. The Watson–Crick edge of Hyp and the cIMP phosphate group play a role in nonspecific His...cIMP contacts. The interactions between the cIMP anions (anti/C3′–endo/trans–gauche/chair conformers) are realized mainly between riboses and phosphate groups. The results for this l ‐His–cIMP complex, compared with those for the previously reported solvated l ‐His–IMP crystal structure, indicate a different nature of amino acid–nucleotide recognition and interactions upon the 3′:5′‐cyclization of the nucleotide phosphate group.     

A–π–D–π–A Electron‐Donating Small Molecules for Solution‐Processed Organic Solar Cells: A Review

Organic solar cells based on semiconducting polymers and small molecules have attracted considerable attention in the last two decades. Moreover, the power conversion efficiencies for solution‐processed solar cells containing A–π–D–π–A‐type small molecules and fullerenes have reached 11%. However, the method for designing high‐performance, photovoltaic small molecules still remains unclear. In this review, recent studies on A–π–D–π–A electron‐donating small molecules for organic solar cells are introduced. Moreover, the relationships between molecular properties and device performances are summarized, from which inspiration for the future design of high performance organic solar cells may be obtained.     

2,2‐Difluor‐1,3‐diaza‐2‐sila‐cyclopenten – Synthese und Reaktionen

2,2‐Difluor‐1,3‐diaza‐2‐sila‐cyclopentene – Synthesis and Reactions N,N′‐Di‐tert‐butyl‐1,4‐diaza‐1,3‐butadiene reacts with elemental lithium under reduction to give a dilithium salt, which forms with fluorosilanes the diazasilacyclopentenes 1 – 4 ; (HCNCMe₃)₂SiFR, R = F ( 1 ), Me ( 2 ), Me₃C ( 3 ), N(CMe₃)SiMe₃ ( 4 ). As by‐product in the synthesis of 1 , the tert‐butyl‐amino‐methylene‐tert‐butyliminomethine substituted compound 5 was isolated, R = N(CMe₃)‐CH₂‐CH = NCMe₃. 5 is formed in the reaction of 1 with the monolithium salt of the 1,4‐diaza‐1,3‐butadiene in an enamine‐imine‐tautomerism. 1 reacts with lithium amides to give (HCNCMe₃)₂SiFNHR, 6 – 12 , R = H ( 6 ), Me ( 7 ), Me₂CH ( 8 ), Me₃C ( 9 ), H₅C₆ ( 10 ), 2,6‐Me₂C₆H₃ ( 11 ), 2,6‐(Me₂CH)₂C₆H₃ ( 12 ). The reaction of 12 with LiNH‐2.6‐(Me₂CH)₂C₆H₃ leads to the formation of (HCNCMe₃)₂Si(NHR)₂, ( 13 ). In the presence of n‐BuLi, 12 forms a lithium salt which looses LiF in boiling toluene. Lithiated 12 adds this LiF and generates a spirocyclic tetramer with a central eight‐membered LiF‐ring ( 14 ), [(HCNCMe₃)₂Si(FLiFLiNR)]₄, R = 2,6‐(Me₂CH)₂C₆H₃. ClSiMe₃ reacts with lithiated 12 to yield the substitution product (HCNCMe₃)₂SiFN(SiMe₃) R, ( 15 ). The crystal structures of 1 , 5 , 6 , 9 , 11 , 13 , 14 are reported.     

Ladder‐Type π‐Conjugated 4‐Hetero‐1,4‐dihydrophosphinines: A Structure–Property Study

π‐Conjugated six‐membered 1,4‐dihydrophosphinines containing a heteroatom (Si, P, S) at the 4 position were synthesized and systematically studied. X‐ray crystallographic analyses showed that the central six‐membered heterocyclic rings are almost planar. The sum of the angles around the phosphorus atom increases by 23° from the trivalent phosphorus to the phosphonium atom in the thiaphosphinine system, which is consistent with the NMR spectroscopic studies. UV/Vis spectroscopy and theoretical calculations revealed that the communication between the phosphorus center and the benzothiophene moiety is enhanced by the incorporation of a sulfur atom into the molecular scaffold. The increased conjugation endows the thiaphosphinines with interesting emission properties. Theoretical calculations supported the postulation that the orbital coupling between the π system and a σ* orbital could be enhanced in the thiaphosphinine system, especially through a phosphonium center. Cyclic voltammetry studies revealed that the thiaphosphinine oxide, thiaphosphonium, and cis‐diphosphinine oxide exhibit quasi‐reversible reduction processes, which demonstrate that simple changes in the bridge heteroatoms help to efficiently tune the redox properties of the ladder‐type 4‐hetero‐1,4‐dihydrophosphinines.     

Synthesis and characterization of new electroluminescent materials of 1,3,4‐oxadiazole–1,2,3‐triazole hybrids and 1,3,4‐oxadiazole–1,2,3‐triazole–pyridine derivatives

New electroluminescent materials of 1,3,4‐oxadiazole–1,2,3‐triazole and 1,3,4‐oxadiazole–1,2,3‐triazole–pyridine hybrid derivatives were synthesized and characterized. Following spectroscopic studies and characterization of their electronic properties, 1,3,4‐oxadiazole–1,2,3‐triazole hybrids and 1,3,4‐oxadiazole–1,2,3‐triazole–pyridine derivatives were found to be potentially efficient blue electroluminescent materials. © 2006 Wiley Periodicals, Inc. Heteroatom Chem 17:322–328, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20210     

Summary of ISO/TC 201 Standard: ISO 18115‐1:2010 – surface chemical analysis – vocabulary – general terms and terms used in spectroscopy

This International Standard revises ISO 18115:2001 and the two subsequent amendments by bringing the material up to date and separating out the general terms and terms used in spectroscopy into Part 1, and terms relating to scanning probe microscopy into Part 2. This part, Part 1, covers 548 terms used in Auger electron spectroscopy, elastic peak electron spectroscopy, reflected electron energy loss spectroscopy, secondary ion mass spectrometry, ultra‐violet photoelectron spectroscopy, X‐ray photoelectron spectroscopy, and so on, as well as 52 acronyms. The terms cover words or phrases used in describing the samples, instruments, and theoretical concepts involved in surface chemical analysis. Copyright © 2012 Crown copyright.     

Design of peptides with α,β‐de­hydro residues: pseudo‐tripeptide N‐benzyl­oxy­carbonyl–ΔLeu–l‐Ala–l‐Leu–OCH3

The title peptide N‐benzyl­oxy­carbonyl–ΔLeu–l ‐Ala–l ‐Leu–OCH₃ [methyl N‐(benzyl­oxy­carbonyl)‐α,β‐de­hydro­leucyl‐l ‐alanyl‐l ‐leucinate], C₂₄H₃₅N₃O₆, was synthesized in the solution phase. The peptide adopts a type II′β‐turn conformation which is stabilized by an intramolecular 4 1 N—H?O hydrogen bond. The crystal packing is stabilized by two intermolecular N—H?O hydrogen bonds.     

The hydrogen‐bonded adduct 7,16‐diazonia‐18‐crown‐6–4‐aminobenzenesulfonate–water (1/2/2)

In the title hydrated adduct, 1,4,10,13‐tetraoxa‐7,16‐diazo­nia­cyclo­octa­decane bis(4‐amino­benzene­sulfonate) dihydrate, C₁₂H₂₈N₂O₄²⁺·2C₆H₆NO₃S⁻·2H₂O, formed between 7,16‐di­aza‐18‐crown‐6 and the dihydrate of 4‐amino­benzene­sulfonic acid, the macrocyclic cations lie across centres of inversion in the orthorhombic space group Pbca. The anions alone form zigzag chains, and the cations and anions together form sheets that are linked via water mol­ecules and anions to form a three‐dimensional grid.     

Carbohydrate‐2‐deoxy‐2‐phosphonates: Simple Synthesis and Horner–Emmons Reaction

Phosphorus meets carbohydrates : Dimethyl phosphite reacts with ceric(IV) ammonium nitrate (CAN) to give phosphonyl radicals that add to glycals 1 . The derivatives 2 were isolated in high yields and during a subsequent Horner–Emmons reaction underwent an interesting elimination to give 3,6‐dihydro‐2H‐pyrans 3 . The short sequence with simple precursors is applicable to the transformation of hexoses, pentoses, and disaccharides. Bn=benzyl.

     

5‐n‐Butylpyridine‐2‐carboxylate–copper(II) and –iron(III) complexes

In trans‐bis(5‐n‐butyl­pyridine‐2‐carboxyl­ato‐κ²N,O)­bis­(methanol‐κO)copper(II), [Cu(C₁₀H₁₂NO₂)₂(CH₄O)₂], the Cu atom lies on a centre of symmetry and has a distorted octahedral coordination. The Cu—O(methanol) bond length in the axial direction is 2.596 (3) Å, which is much longer than the Cu—­O(carboxylate) and Cu—N distances in the equatorial plane [1.952 (2) and 1.977 (2) Å, respectively]. In mer‐tris(5‐n‐bu­tyl­pyridine‐2‐carboxyl­ato‐κ²N,O)­iron(III), [Fe(C₁₀H₁₂NO₂)₃], the Fe atom also has a distorted octahedral geometry, with Fe—O and Fe—N bond‐length ranges of 1.949 (4)–1.970 (4) and 2.116 (5)–2.161 (5) Å, respectively. Both crystals are stabilized by stacking interactions of the 5‐n‐butyl­pyridine‐2‐carboxyl­ate ligand, although hydrogen bonds also contribute to the stabilization of the copper(II) complex.     

1,5‐Diamino‐4‐methyltetrazolium 5‐Nitrotetrazolate – Synthesis,Testing and Scale‐up

1,5‐Diamino‐4‐methyltetrazolium 5‐nitrotetrazolate ( 2b ) was synthesized in high yield from 1,5‐diamino‐4‐methyltetrazolium iodide ( 2a ) and highly sensitive silver 5‐nitrotetrazolate (AgNT). A safer synthesis, suitable for scale‐up, is introduced involving reaction of the previously unreported 1‐amino‐5‐imino‐4‐methyltetrazole free base ( 2 ) with ammonium 5‐nitrotetrazolate. Both new compounds ( 2 and 2b ) were fully characterized using vibrational (IR and Raman) and multinuclear NMR spectroscopy (¹H, ¹³C, ¹⁴N, ¹⁵N), elemental analysis and single crystal X‐ray diffraction. The hydrogen‐bonding networks of both materials are described in terms of their graph‐sets. Compound 2b is hydrolytically stable with a high melting point and concomitant decomposition at 160 °C. The sensitivity of the energetic salt 2b towards impact (>30 J) and friction (>360 N) was tested. The constant volume energy of combustion (Δ_cU) of 2b was measured experimentally using bomb calorimetry. In addition, the detonation parameters (detonation pressure and velocity) of the nitrotetrazolate salt were calculated from the energy of formation, the crystal density and the molecular formula using the EXPLO5 computer code (P = 15.5·GPa, D = 6749 m s^?1) and are similar to that of TNT and nitroguanidine making 2b of prospective interest in propellant charge formulations or, in combination with a suitable oxidizer, as a solid propellant.     

(–)‐Dimenthyl malonate

The title compound, bis(2‐iso­propyl‐5‐methyl­cyclo­hex‐1‐yl) malonate, C₂₃H₄₀O₄, crystallizes in the monoclinic space group P2₁. In the crystal, the mol­ecule is not C₂ symmetric.