New ligand, N-(2-pyridylmethyl)aminoacetate, for use in the immobilised metal ion affinity chromatographic separation of proteins.

A new chelating compound has been developed for use in the immobilised metal ion affinity chromatographic separation of proteins. The tridentate ligand, sodium N-(2-pyridylmethyl)aminoacetate (carbpyr), 1, was prepared via a one-step synthesis from 2-picolylamine, 3 and then immobilised onto Sepharose CL-4B through the epoxide coupling procedure. The binding behaviour of the resulting IMAC sorbent, following chelation with Cu2+ ions to a density of 152 micromol Cu2+ ions/g gel was characterised by frontal analysis experiments using horse heart myoglobin (HMYO) at pH 7.0 and pH 9.0. From the derived isotherms, the adsorption capacity, q(m), for the binding of HMYO to immobilised Cu2+-N-(2-pyridylmethyl)aminoacetate (im-Cu2+-carbpyr)-Sepharose CL-4B at these pH values was found to be 1.92 and 1.91 micromol/g sorbent, respectively, whilst the dissociation constants K(D) were 0.0092 x 10(-6) M and 0.0062 x 10(-6) M at pH 7.0 and pH 9.0, respectively, indicating that the HMYO-im-Cu2+-N-(2-pyridylmethyl)aminoacetate complex was more stable under alkaline conditions, although the binding capacity in terms of micromol protein/g gel remained essentially unchanged. The selectivity features of the im-Cu2+-carbpyr-Sepharose CL-4B sorbent were further characterised in terms of the binding properties with several human serum proteins at pH 5.0, pH 7.0 and pH 9.0.     

Separation and preconcentration of metal ions and their estimation in vitamin, steel and milk samples using o-vanillin-immobilized silica gel

o-Vanillin-immobilized silica gel has been used for the adsorption and estimation of copper, cobalt, iron and zinc by both batch and column techniques. Metal ions were quantitatively retained on the column packed with immobilized silica gel in the pH range 4.0-6.0 for Cu, 5.0-6.0 for Co, 4.5-6.0 for Fe and 6.0-8.0 for Zn. The distribution coefficient D determined for each metal was as follows (ml g(-1)): Fe, 5.4x10(2); Cu, 4.9x10(2); Zn, 4.4x10(2); Co, 3.8x10(2). Methods have been developed to estimate zinc, copper and cobalt in milk, steel and vitamin samples, respectively.     

Analysis of Nonionic Surfactants by High Performance Liquid Chromatography

Abstract

This review discusses the principles of immobilized metal ion affinity chromatography (IMAC) and its applications to protein separations. IMAC functions by binding the accessible electron-donating pendant groups of a protein - such as histidine, cysteine, and tryptophan - to a metal ion which is held by a chelating group covalently attached on a stationary support. A common chelating group is iminodiacetate. The ions commonly used are of borderline or soft metals, such as Cu²⁺, Ni²⁺, Co²⁺, and Zn²⁺. Protein retention in IMAC depends on the number and type of pendant groups which can interact with the metal. The interaction is affected by a variety of independent variables such as pH, temperature, solvent type, salt type, salt concentration, nature of immobilized metal and chelate, ligand density, and protein size. Proteins are usually eluted by a decreasing pH gradient or by an increasing gradient of a competitive agent, such as imidazole, in a buffer. There are still several unresolved issues in IMAC. The exact structures of protein-immobilized metal complexes need to be known so that retention behavior of proteins can be fully understood and sorbent structures can be optimized. Engineering parameters, such as adsorption/desorption rate constants, sorbent capacities, and intraparticle diffusivities, need to be developed for most protein systems. Engineering analysis and quantitative understanding are also needed so that IMAC can be used efficiently for large scale protein separations.     

Thermosensitive copolymers of N-vinylimidazole as displacers of proteins in immobilised metal affinity chromatography

Synthetic copolymers of N-vinylcaprolactam (VCL) and N-vinylimidazole (VI) were studied as thermosensitive, reusable displacers for immobilised metal affinity chromatography (IMAC) of proteins. The copolymer with weight-average molecular mass of 11700 g/mol prepared by free radical polymerisation at a 9:1 monomer molar ratio was separated into several fractions by IMAC and thermal precipitation. The fraction with an average VI content of 8.5% was most efficient as a reusable displacer for IMAC of ovalbumin, lysozyme and other proteins of egg white on Cu2+-IDA-Sepharose. The displacer exhibited a sharp breakthrough curve and binding capacity of 16-20 mg/ml gel, depending on the flow-rate. The recovery of egg white proteins in the course of displacement chromatography was >95%. The displacer could be removed quantitatively from the protein fractions by thermal precipitation at 48 degrees C. Co-precipitation of lysozyme with the displacer was minimal in the presence of 3% (v/v) acetonitrile, while the lysozyme enzymatic activity in the supernatant was completely retained. Addition of free imidazole to the mobile phase increased the rate of protein desorption and allowed better separation of egg white proteins and the displacer in the course of chromatography. The displacement profile of the egg white extract consisted of three zones with different distributions of individual proteins characterised by SDS-PAGE. Regeneration of the column was easily performed with 0.02 M EDTA in 0.15 M sodium chloride, pH 8.0, followed by washing with distilled water and reloading with Cu2+. The displacer could also be regenerated by thermal precipitation at 48 degrees C and subsequent dialysis against dilute hydrochloric acid (pH 2.5).     

功能化介孔硅材料的合成及其对富含裸露组氨酸蛋白质的选择性吸附

通过自由基聚合反应合成了具有高比表面积的介孔硅(PPOSS),并对其表面进行修饰和铜离子(Cu~(2+))的固定,最终得到功能化介孔硅材料(PPOSS-IDA-Cu~(2+)),然后利用PPOSS-IDA-Cu~(2+)中的Cu~(2+)与蛋白质裸露组氨酸的螯合作用,选择性吸附富含裸露组氨酸的蛋白质。对牛血红蛋白、牛血清白蛋白、肌红蛋白和溶菌酶的吸附结果表明,所合成的PPOSS-IDA-Cu~(2+)材料对富含组氨酸的牛血红蛋白有较好的吸附选择性和较大的吸附容量(3 150mg/g),并且有望与其他材料联合使用,以检测到更多相对丰度较低的蛋白质,丰富人类蛋白质组学信息,为疾病的临床诊断及病理研究提供帮助。     

固定金属离子亲和色谱--蛋白质分离的方法、原理、特性和应用

介绍了固定金属离子亲和色谱法(IMAC)的方法原理、金属螯合柱的制备、固定金属离子与蛋白质的相互作用以及影响这些作用的因素、不同色谱条件下各种作用力对蛋白质保留值的贡献、蛋白质的洗脱原理和IMAC在蛋白质分离纯化中的应用,论述了IMAC的特点、不足、克服的方法和今后应解决的问题。     

Comparison of adsorption performances of metal–chelated polyamide hollow fibre membranes in lysozyme separation

Commercially available microporous polyamide hollow fibres are modified by acid hydrolysis to activate the reactive groups and subsequently binding of the ligand, i.e. Cibacron Blue F3GA. Then the Cibacron Blue F3GA-derived hollow fibres were loaded with different metal ions (i.e. Zn(II), Cu(II), Ni(II)) to form the metal chelate. The internal polymer matrix was characterised by scanning electron microscopy. The effects of pH, initial concentration of lysozyme, metal type and temperature on the adsorption of lysozyme to the metal–chelated hollow fibres were examined in a batch reactor. The non-specific adsorption of lysozyme onto the polyamide hollow fibres was 1.8 mg/g. Cibacron Blue F3GA immobilisation increased the lysozyme adsorption up to 62.3 mg/g. Metal–chelated hollow fibres showed a significant increase of the adsorption efficiency. Lysozyme adsorption capacities of Zn(II), Cu(II) and Ni(II)-chelated hollow fibres were different. The maximum capacities of Zn(II), Cu(II) or Ni(II)-chelated hollow fibres were 144.2, 75.2 and 68.6 mg/g, respectively. Significant amount of the adsorbed lysozyme (up to 97%) was eluted in 1 h in the elution medium containing 1.0 M NaSCN at pH 8.0 and 25 mM EDTA at pH 4.9. Repeated adsorption–desorption process showed that this novel metal–chelated polyamide hollow fibres are suitable for lysozyme adsorption.     

Separation of β-blocker and amino acid enantiomers on a mixed chiral sorbent modified with macrocyclic antibiotics eremomycin and vancomycin

A mixed chiral sorbent based on silica with immobilized macrocyclic antibiotics eremomycin and vancomycin was synthesized. A possibility of the separation of enantiomers of β-blockers (metoprolol, pindolol, alprenolol, oxprenolol, labetalol, and atenolol) and amino acids (tryptophan, phenylalanine, DOPA, methionine, and acetyl glutamic acid) on this chiral sorbent by HPLC was studied. The influence of the composition of the mobile phase (pH of buffer solution, its concentration, content of organic modifier, and its nature) on the retention times of β-blocker and amino acid enantiomers, selectivity, and resolution of peaks was studied. It was shown that the mixed chiral sorbent has enantioselectivity to both classes of compounds, while silica modified with vancomycin has no ability to the separation of enantiomers of non-derivatized amino acids, and silica modified with eremomycin has no ability to the separation of β-blocker enantiomers. High values of resolution for amino acids (max Rs > 4) and β-blockers (max Rs > 1) were obtained.     

Examination of the binding behaviour of several proteins with the immobilized copper(II) complexes of o-, m- and p-xylylene bridged bis(1,4,7-triazacyclononane) macrocycles

Three new IMAC chelating systems, incorporating immobilised xylenyl-bridged bis(1,4,7-triaza-cyclonane) ligands, complexed with Cu(2+) ions to form binuclear species, have been prepared. Their binding properties have been investigated with three small globular proteins (hen egg white lysozyme, horse skeletal muscle myoglobin and horse heart cytochrome c). The effects of buffer pH, ionic strength and composition on the binding behaviour of these proteins to these new IMAC sorbents have been examined and compared with those found for the corresponding immobilized mononuclear copper complex of 1,4,7-triazacyclononane (tacn). Higher protein binding affinities were observed with the Cu(2+)-bis(tacn) sorbents compared to the Cu(2+)-tacn system, consistent with the immobilized binuclear copper(II) species undergoing enhanced coordinative interaction with the surface-exposed histidine residues of these proteins. Moreover, the protein binding characteristics of these IMAC sorbents at higher ionic strengths, such as 1M NaCl, also reflect the presence of the aromatic ring in the bis(tacn) ligands, whereby hydrophobic pi/pi stacking interactions can occur with the proteins.     

Determination of trace amounts of nickel, manganese, cobalt, and zinc in environmental samples after separation and preconcentration by use of polyacrylic acid/alumina sorbent

Manganese, nickel, cobalt, and zinc are elements that appear together in many real samples. In this work, a simple, rapid, and sensitive method has been used for the simultaneous separation and preconcentration of trace amounts of these elements using water-soluble polyacrylic acid on alumina as a sorbent in a glass column system. A solution containing Mn, Ni, Co, and Zn was passed through the column at pH 7, and desorption was carried with 5.0 mL of 0.03 M nitric acid. Linearity was maintained between 0.25-5.0 x 10(3), 0.04-6.0 x 10(3), 0.10-8.0 x 10(3), and 0.028-1.0 x 10(3) ng/mL for Ni, Mn, Co, and Zn, respectively, in the original solution. Eight replicate determinations of a mixture containing 1.0 microg/mL of each of the elements in the final solution gave relative standard deviations of 1.4, 1.5, 2.4, and 1.2% for Ni, Mn, Co, and Zn, respectively. The sorption capacities for Mn (mg/g sorbent) obtained were 16.0 for Mn, 9.0 for Ni, 12.0 for Co, and 10.0 for Zn. By using 5.0 mL elution solution, preconcentration factors of 400, 500, 700, and 460 could be obtained for Ni, Mn, Zn, and Co, respectively.     

Chromatographic separation of proteins on metal immobilized iminodiacetic acid-bound molded monolithic rods of macroporous poly(glycidyl methacrylate-co-ethylene dimethacrylate)

Continuous rod of macroporous poly(glycidyl methacrylate-co-ethylene dimethacrylate) was prepared by a free radical polymerization within the confines of a stainless-steel column. The epoxide groups of the rod were modified by a reaction with iminodiacetic acid (IDA) that affords the active site to form metal IDA chelates used for immobilized metal affinity chromatography (IMAC). The efficiency of coupling of IDA to the epoxide-contained matrix was studied as a function of reaction time and temperature. High-performance separation of proteins, based on immobilized different metals on the column, were described. The influence of pH on the adsorption capacity of bovine serum albumin on the Cu2+-IDA continuous rod column was investigated in the range from 5.0 to 9.0. Purification of lysozyme from egg white and human serum albumin (HSA) on the commercially available HSA solution were performed on the naked IDA and Cu2+-IDA continuous rod columns, respectively; and the purity of the obtained fractions was detected by matrix-assisted laser desorption-ionization time-of-flight mass spectrometry.     

Adsorption and selectivity characteristics of several human serum proteins with immobilised hard Lewis metal ion-chelate adsorbents

In this investigation, human serum has been used as an example of a crude protein mixture to define the protein binding characteristics and selectivity of several immobilised hard Lewis metal ion affinity chromatographic (IMAC) adsorbents. Specifically, the binding properties of immobilised O-phosphoserine (im-OPS) and 8-hydroxyquinoline (im-8-HQ), with immobilised iminodiacetic acid as a control system, have been investigated in combination with the hard Lewis metal ions, Al3+, Ca2+, Fe3+, Yb3+, and the borderline metal ion, Cu2+, over the pH range pH 5.5 to pH 8.0 with buffers of 0.5 M ionic strength. The same IMAC adsorbents were also investigated for their protein binding capabilities with buffers of an ionic strength of 0.06 M at pH 5.5 and pH 8.0. The binding behaviour of four "marker" proteins, namely transferrin, alpha2-macroglobulin, gammaglobulin and human serum albumin have furthermore been employed to monitor the differences in protein selectivity exhibited by these IMAC systems. The experimental findings confirm that these hard Lewis metal ion IMAC adsorbents function in a "mixed" binding mode with both coordination and electrostatic characteristics evident, depending on the ionic strength and pH of the equilibration or elution buffers. Based on a screening protocol, several members of the im-Mn+-8-HQ and im-Mn+-OPS adsorbent series have been identified with high selectivity for transferrin and alpha2-macroglobulin. These hard Lewis metal ion IMAC adsorbents thus provide attractive alternatives for selective fractionation of human serum proteins.     

Polyamidoamine‐grafted silica nanoparticles as pseudostationary phases for capillary electrochromatographic separation of proteins

Polyamidoamine‐grafted silica nanoparticles were synthesized, characterized and investigated for the feasibility as pseudostationary phases in alkaline buffer for separation of cationic and anionic proteins, viz., lysozyme, cytochrome C, gamma globulin, and myoglobin. Neither bare silica nanoparticles nor polyamidoamines nor their mixtures as pseudostationary phases could lead to simultaneous separation of the four proteins. However, polyamidoamine‐grafted silica nanoparticles not only suppressed the irreversible wall adsorption of the cationic lysozyme and cytochrome C, but also provided selectivity toward all the proteins. We found that polyamidoamine generation two‐modified silica nanoparticles were the optimum pseudostationary phases with respect to detection sensitivity and separation efficiency; presence of the nanoparticles at 0.01% in the running buffer of 12.5 mM tetraborate/phosphate at pH 9.1 resulted in baseline resolution of the four proteins.     

Macroporous chitosan layer coated on non-porous silica gel as a support for metal chelate affinity chromatographic adsorbent

A new immobilized metal affinity chromatography (IMAC) matrix was prepared by coordinating Cu2+ with cross-linked chitosan coated on non-porous silica gel (Cu-CTS-SiO2). Macroporous structure could be formed on the coated layer by imprinting polyethylene glycol (PEG) in chitosan film. The surface morphology changes on Cu-CTS-SiO2 bead prepared in different condition were confirmed by scanning electron microscopy (SEM). Effects of chitosan and PEG content in coating solution, the molecular mass of PEG on the surface macropore formation and adsorption capacity of bovine serum albumin (BSA) were investigated. Results indicated that coating solution with 2% chitosan and 10% PEG 20000 was optimal. Batch experiments were also conducted for elucidating the optimal pH, the adsorption isotherm and adsorption kinetics of BSA. Adsorption isotherm of trypsin on the same adsorbent was also performed. Results showed that the support itself had low non-specific interaction with both BSA and trypsin. The maximum adsorption capacity for BSA and trypsin on the prepared IMAC adsorbent could reach 192 mg and 5000 IU, respectively calculated by every gram of chitosan. The binding and eluting condition for BSA were tested on column filled with the adsorbent. Crude BSA sample could be purified on the IMAC column.     

Polyacrylic acid-modified alumina for solid-phase extraction and preconcentration of trace iron and chromium from plant samples

A new method is presented for simultaneous preconcentration of trace Fe(III) and Cr(III) by using polyacrylic acid-alumina as a sorbent. The separation/preconcentration conditions of analytes were investigated, including effect of pH, flow rate, elution conditions, sample volume, and interfering ions. At pH 4, the maximum sorption capacities of Fe3+ and Cr3+ were 8.0 and 13.0 mg/g, respectively, by the column method. The linearity was maintained in the concentration range of 0.175-6.0 x 10(3) ng/mL for iron and 0.175-8.0 x 10(3) ng/mL for chromium in the original solution. The RSD values under optimum conditions were +/- 1.73 and +/- 1.28% for 2.0 microg/mL Fe and Cr, respectively. The preconcentration factor was 400 for both of the elements, and detection limits were 0.025 and 0.023 ng/mL for Fe and Cr in the original solutions. The proposed method was successfully applied to the determination of trace amounts of Fe and Cr in plant samples.     

High-performance liquid chromatography of amino acids, peptides and proteins. CIX. Investigations on the relation between the ligand density of cibacron blue immobilized porous and non-porous sorbents and protein-binding capacities and association constants.

A porous silica of nominal 5 microns particle diameter and 30 nm pore size (Nucleosil 300-5) and a non-porous silica of nominal 1.5 microns particle diameter were activated with 3-mercaptopropyltriethoxysilane (MPTS), followed by the immobilization of the triazine dye, Cibacron Blue F3GA. Various biomimetic dye sorbents with graduated ligand densities between 1 mumol/m2 and 0.01 mumol/m2 were prepared. The capacities and the association constants associated with the binding of lysozyme to these sorbents were determined by frontal analysis experiments [J. Chromatogr., 476 (1989) 205-225]. Due to the ability of the Cibacron Blue F3GA-modified silicas to act as mixed mode coulombic and hydrophobic interaction sorbents and the highly charged nature of the surface structure of lysozyme (pl 11), two mobile phase conditions were examined. In one case a 0.1 M phosphate buffer, pH 7.8, was used as the equilibration and loading buffer, in the second case 1 M sodium chloride-0.1 M phosphate buffer, pH 7.8 was employed as the equilibration and loading buffer to monitor the influence of ionic interactions. The elution was performed in each case with a 2.5 M potassium thiocyanate solution. With the porous silica dye sorbents and 1 M NaCl present in the loading buffer, the highest capacity was achieved when Cibacron Blue F3GA was immobilised to the level of 0.1 mumol/m2. In the case of the non-porous silica dye sorbents, the maximum protein capacity was achieved when 0.5 mumol/m2 dye were immobilised onto the support. Evaluation of the frontal breakthrough curves confirmed that the kinetics of adsorption of lysozyme onto the non-porous sorbent were substantially faster than the adsorption of lysozyme onto the porous sorbent due to the absence of pore diffusion effects in case of the non-porous support. Furthermore, the adsorption of lysozyme on both sorbents was faster when no salt was added to the loading buffer, indicating that there is either conformational or reorientation effects operating during the specific binding of the protein to the dye ligand, or that the interaction is proceeding through the participation of a second class of binding sites. The magnitude of the association constants, Ka, for the lysozyme-Cibacron Blue F3GA systems were found to be dependent on the ligand density of the sorbent. With decreasing ligand density, the protein-ligand interaction became stronger, e.g. Ka values became larger. These results confirm earlier observations on the effect of ligand steric compression on the affinate-ligand association constant, e.g. the protein needs sufficient space to interact with the ligand in an optimum way.(ABSTRACT TRUNCATED AT 400 WORDS)     

Immobilized Metal Affinity Chromatography of Phosphorylated Proteins Using High Performance Sorbents

The interactions of two model phosphoproteins (porcine pepsin and ovalbumin) with two different immobilized metal affinity chromatography (IMAC) sorbents containing immobilized Fe³⁺, Ga³⁺, and UO₂ ²⁺ ions have been investigated under various conditions. Both proteins were adsorbed on immobilized uranyl ions under acidic conditions similar to those on immobilized Fe³⁺ and Ga³⁺ ions. The retained proteins could be released either by the presence of phosphate ions in the elution buffer (immobilized Ga³⁺ and Fe³⁺ ions) or by an increased pH (all tested immobilized ions). The IMAC sorbents employed could be used under the conditions of high-performance chromatography and are suitable for the separation and analysis of intact phosphoproteins.     

Formation of high-capacity protein-adsorbing membranes through simple adsorption of poly(acrylic acid)-containing films at low pH

Layer-by-layer polyelectrolyte adsorption is a simple, convenient method for introducing ion-exchange sites in porous membranes. This study demonstrates that adsorption of poly(acrylic acid) (PAA)-containing films at pH 3 rather than pH 5 increases the protein-binding capacity of such polyelectrolyte-modified membranes 3-6-fold. The low adsorption pH generates a high density of -COOH groups that function as either ion-exchange sites or points for covalent immobilization of metal-ion complexes that selectively bind tagged proteins. When functionalized with nitrilotriacetate (NTA)-Ni(2+) complexes, membranes containing PAA/polyethylenimine (PEI)/PAA films bind 93 mg of histidine(6)-tagged (His-tagged) ubiquitin per cm(3) of membrane. Additionally these membranes isolate His-tagged COP9 signalosome complex subunit 8 from cell extracts and show >90% recovery of His-tagged ubiquitin. Although modification with polyelectrolyte films occurs by simply passing polyelectrolyte solutions through the membrane for as little as 5 min, with low-pH deposition the protein binding capacities of such membranes are as high as for membranes modified with polymer brushes and 2-3-fold higher than for commercially available immobilized metal affinity chromatography (IMAC) resins. Moreover, the buffer permeabilities of polyelectrolyte-modified membranes that bind His-tagged protein are ~30% of the corresponding permeabilities of unmodified membranes, so protein capture can occur rapidly with low-pressure drops. Even at a solution linear velocity of 570 cm/h, membranes modified with PAA/PEI/PAA exhibit a lysozyme dynamic binding capacity (capacity at 10% breakthrough) of ~40 mg/cm(3). Preliminary studies suggest that these membranes are stable under depyrogenation conditions (1 M NaOH).     

Retention Behavior of Proteins on Glutamic Acid-Boned Silica Stationary Phase

A glutamic acid-bonded silica (Glu-silica) stationary phase with cation-exchange properties was synthesized using l-glutamic acid as ligand and silica gel as matrix. The effects of solution pH value, salt concentration and metal ion on the retention of proteins were examined. The standard protein mixture was separated with a prepared chromatographic column and an iminodiacetic acid column, and compared. The influence of the binding capacity of an immobilized metal ion on the complexation of metal chelate column was studied. The results indicate that the obtained column displays cation-exchange characteristic and better separation ability for proteins. As fixing metal ion on the Glu-silica column, retention of proteins on the column is a cooperative interaction of metal chelate and cation-exchange. The stationary phase shows the typical metal chelate properties with the increase of the sorption capacity of immobilized metal ion.     

Quaternized celluloses as new dynamic coatings in capillary electrophoresis for basic protein separation

In this work, a series of quaternized celluloses (QCs), homogeneously synthesized in the NaOH/urea aqueous solutions, were studied as dynamic coatings for capillary electrophoresis. Capillaries coated with these cationic cellulose derivatives at the concentration as low as 3 μg/mL were able to generate a stable, reversed electroosmotic flow. The effects of QC molecular parameters, such as the degree of cationic substitution and molecular weight, and the effect of buffer pH on the EOF mobility as well as the separation of basic proteins were investigated in detail. It was shown that the use of QC coatings in CE could drastically reduce the analysis time and improve the separation performance within a broad pH range. Five basic proteins, that is, lysozyme, ribonuclease A, cytochrome C, bovine pancreatic trypsin inhibitor, and chymotrypsinogen were baselinely separated even at pH 8.0. The separation efficiency and analysis reproducibility demonstrated that the QC coatings were efficient in minimizing the adsorption of basic proteins on the fused silica capillary. The successful performance was further demonstrated for biosample analysis.