Two generalizable routes to terminal carbido complexes

Desulfurization of the thiocarbonyl ligand in square pyramidal [Ru(CS)Cl2(PCy3)2] (1-S) via sulfur atom abstraction using [Mo(H)(eta2-Me2CNAr)(N[i-Pr]Ar)2] forms [Ru(C)Cl2(PCy3)2] (1) cleanly over several hours in benzene; isolated yield is 55%. Complex 1 is also formed in 87% isolated yield upon reaction of [Ru(CHR)(PCy3)2Cl2] (R = p-C6H4Me, 2; Ph, 3) with vinyl acetate in dichloromethane. Complex 1-S is re-formed quantitatively from 1 upon treatment with elemental sulfur in CH2Cl2, but is prepared most conveniently by treatment of crude [Ru(CS)Cl2(PPh3)2(OH2)] with excess PCy3 in toluene. Nearly quantitative conversion of 1 to [Ru(CO)Cl2(PCy3)2] (1-O) occurs upon addition of dimethyldioxirane solution in acetone to 1 dissolved in CH2Cl2 at ca. -90 degrees C.     

Synthesis, structure, and reactivity of ruthenium carboxylato and 2-oxocarboxylato complexes bearing the bis(3,5-dimethylpyrazol-1-yl)acetato ligand

A series of ruthenium(II) acetonitrile, pyridine (py), carbonyl, SO2, and nitrosyl complexes [Ru(bdmpza)(O2CR)(L)(PPh3)] (L = NCMe, py, CO, SO2) and [Ru(bdmpza)(O2CR)(L)(PPh3)]BF4 (L = NO) containing the bis(3,5-dimethylpyrazol-1-yl)acetato (bdmpza) ligand, a N,N,O heteroscorpionate ligand, have been prepared. Starting from ruthenium chlorido, carboxylato, or 2-oxocarboxylato complexes, a variety of acetonitrile complexes [Ru(bdmpza)Cl(NCMe)(PPh3)] (4) and [Ru(bdmpza)(O2CR)(NCMe)(PPh3)] (R = Me (5a), R = Ph (5b)), as well as the pyridine complexes [Ru(bdmpza)Cl(PPh3)(py)] (6) and [Ru(bdmpza)(O2CR)(PPh3)(py)] (R = Me (7a), R = Ph (7b), R = (CO)Me (8a), R = (CO)Et (8b), R = (CO)Ph) (8c)), have been synthesized. Treatment of various carboxylato complexes [Ru(bdmpza)(O2CR)(PPh3)2] (R = Me (2a), Ph (2b)) with CO afforded carbonyl complexes [Ru(bdmpza)(O2CR)(CO)(PPh3)] (9a, 9b). In the same way, the corresponding sulfur dioxide complexes [Ru(bdmpza)(O2CMe)(PPh3)(SO2)] (10a) and [Ru(bdmpza)(O2CPh)(PPh3)(SO2)] (10b) were formed in a reaction of the carboxylato complexes with gaseous SO2. None of the 2-oxocarboxylato complexes [Ru(bdmpza)(O2C(CO)R)(PPh3)2] (R = Me (3a), Et (3b), Ph (3c)) showed any reactivity toward CO or SO2, whereas the nitrosyl complex cations [Ru(bdmpza)(O2CMe)(NO)(PPh3)](+) (11) and [Ru(bdmpza)(O2C(CO)Ph)(NO)(PPh3)](+) (12) were formed in a reaction of the acetato 2a or the benzoylformato complex 3c with an excess of nitric oxide. Similar cationic carboxylato nitrosyl complexes [Ru(bdmpza)(O2CR)(NO)(PPh3)]BF4 (R = Me (13a), R = Ph (13b)) and 2-oxocarboxylato nitrosyl complexes [Ru(bdmpza)(O2C(CO)R)(NO)(PPh3)]BF4 (R = Me (14a), R = Et (14b), R = Ph (14c)) are also accessible via a reaction with NO[BF4]. X-ray crystal structures of the chlorido acetonitrile complex [Ru(bdmpza)Cl(NCMe)(PPh3)] (4), the pyridine complexes [Ru(bdmpza)(O2CMe)(PPh3)(py)] (7a) and [Ru(bdmpza)(O2CC(O)Et)(PPh3)(py)] (8b), the carbonyl complex [Ru(bdmpza)(O2CPh)(CO)(PPh3)] (9b), the sulfur dioxide complex [Ru(bdmpza)(O2CPh)(PPh3)(SO2)] (10b), as well as the nitrosyl complex [Ru(bdmpza)(O2C(CO)Me)(NO)(PPh3)]BF4 (14a), are reported. The molecular structure of the sulfur dioxide complex [Ru(bdmpza)(O2CPh)(PPh3)(SO2)] (10b) revealed a rather unusual intramolecular SO2-O2CPh Lewis acid-base adduct.     

Vinyl and carbene ruthenium(II) complexes from hydridoruthenium(II) precursors

The reactions of the hydrido compounds [RuHCl(CO)(L)2][L = PiPr3 (1), PCy3 (2)] with HC(triple bond)CR (R = H, Ph, tBu) afforded by insertion of the alkyne into the Ru-H bond the corresponding vinyl complexes [RuCl(CHCHR)(CO)(L)2], 3-8, which upon protonation with HBF4 gave the cationic five-coordinated ruthenium carbenes [RuCl(CHCH2R)(CO)(L)2]BF4, 9-14. Subsequent reactions of the carbene complexes with PR3(R = Me, iPr) and CH3CN led either to deprotonation and re-generation of the vinyl compounds or to cleavage of the ruthenium-carbene bond and the formation of the six-coordinated complexes [RuCl(CO)(CH3CN)2(PiPr3)2]BF4, 17, and [RuH(CO)(CH3CN)2(PiPr3)2]X, 18a,b. The acetato derivative [RuH(2-O2CCH3)(CO)(PCy3)2], 19, also reacted with acetylene and phenylacetylene by insertion to yield the related vinyl complexes [Ru(CHCHR)(kappa2-O2CCH3)(CO)(PCy3)2], 20, 21, of which that with R = H was protonated with HBF4 to yield the corresponding cationic ruthenium carbene 22. With [RuHCl(H2)(PCy3)2], 25, as the starting material, the five-coordinated chloro(hydrido)ruthenium(II) compounds [RuHCl(PCy3)(dppf)], 26(dppf = [Fe(eta5-C5H4PPh2)2]), [RuHCl[Sb(CH2Ph)3](PCy3)2], 27, and [RuHCl(CH3CN)(PCy3)2], 30, were prepared. The reactions of 27 with HCCR (R = H, Ph) gave the hydrido(vinylidene) complexes [RuHCl(CCHR)(PCy3)2], 28 and 29, whereas treatment of 30 with HC(triple bond)CPh afforded the vinyl compound [RuCl(CHCHPh)(CH3CN)(PCy3)2], 31. The molecular structures of 11(R = tBu, L = PiPr3) and 26 were determined crystallographically.     

Copper halide-bridged ruthenium telluride carbonyl complexes: discovery of the semiconducting cluster chain polymer {[PPh4]2[Te2Ru4(CO)10Cu4Br2Cl2].THF}infinity

A new series of Te-Ru-Cu carbonyl complexes was prepared by the reaction of K(2)TeO(3) with [Ru(3)(CO)(12)] in MeOH followed by treatment with PPh(4)X (X=Br, Cl) and [Cu(MeCN)(4)]BF(4) or CuX (X=Br, Cl) in MeCN. When the reaction mixture of K(2)TeO(3) and [Ru(3)(CO)(12)] was first treated with PPh(4)X followed by the addition of [Cu(MeCN)(4)]BF(4), doubly CuX-bridged Te(2)Ru(4)-based octahedral clusters [PPh(4)](2)[Te(2)Ru(4)(CO)(10)Cu(2)X(2)] (X=Br, [PPh(4)](2)[1]; X=Cl, [PPh(4)](2)[2]) were obtained. When the reaction mixture of K(2)TeO(3) and [Ru(3)(CO)(12)] was treated with PPh(4)X (X=Br, Cl) followed by the addition of CuX (X=Br, Cl), three different types of CuX-bridged Te-Ru carbonyl clusters were obtained. While the addition of PPh(4)Br or PPh(4)Cl followed by CuBr produced the doubly CuBr-bridged cluster 1, the addition of PPh(4)Cl followed by CuCl led to the formation of the Cu(4)Cl(2)-bridged bis-TeRu(5)-based octahedral cluster compound [PPh(4)](2)[{TeRu(5)(CO)(14)}(2)Cu(4)Cl(2)] ([PPh(4)](2)[3]). On the other hand, when the reaction mixture of K(2)TeO(3) and [Ru(3)(CO)(12)] was treated with PPh(4)Br followed by the addition of CuCl, the Cu(Br)CuCl-bridged Te(2)Ru(4)-based octahedral cluster chain polymer {[PPh(4)](2)(Te(2)Ru(4)(CO)(10)Cu(4)Br(2)Cl(2)).THF}(infinity) ({[PPh(4)](2)[4].THF}(infinity)) was produced. The chain polymer {[PPh(4)](2)[4].THF}(infinity) is the first ternary Te-Ru-Cu cluster and shows semiconducting behavior with a small energy gap of about 0.37 eV. It can be rationalized as resulting from aggregation of doubly CuX-bridged clusters 1 and 2 with two equivalents of CuCl or CuBr, respectively. The nature of clusters 1-4 and the formation and semiconducting properties of the polymer of 4 were further examined by molecular orbital calculations at the B3LYP level of density functional theory.     

Mechanism of the interconversions between C- and N-bound transition metal alpha-cyanocarbanions

The first presentation of the intra- and intermolecular mechanisms of the C-N interconversions of transition metal alpha-cyanocarbanions is described. A pair of N- and C-bound isomers of isonitrile complex Ru+Cp(NCCH-SO2Ph)(PPh3)(CN-t-Bu) (1) and RuCp[CH(CN)SO2Ph](PPh3)(CN-t-Bu) (2) was synthesized for the mechanistic studies on the N-to-C isomerizations. Structural characterization by X-ray diffractions of 1 and 2 indicated their typical zwitterionic and alpha-metalated structures. The kinetic studies on the irreversible isomerization of 1 to 2 in benzene-d6 at 333-348 K were carried out using 1H NMR spectroscopy, affording the first-order rate constants k1 and the activation parameters DeltaH = 107 +/- 2 kJ.mol-1 and DeltaS = -22 +/- 5 J.K-1.mol-1. The almost identical values of k1 were obtained upon similar treatment of 1 with 4 equiv of external ligands such as PPh3, CH3CN, and t-BuNC at 333 K, indicating that the N-to-C isomerization proceeds in an intramolecular manner without dissociation of a ligand. As a model system for the C-to-N isomerization, the irreversible transformation of RuCp[CH(CN)SO2Ph](PPh3)2 (3) to Ru+Cp(NCCH-SO2Ph)(PPh3)2 (4) was investigated under various reaction conditions. The reaction of 3 at room temperature in THF affords the coordination dimers (RRu*,SC*,RRu*,SC*)-{RuCp[CH(CN)SO2Ph](PPh3)}2 (5) stereoselectively, and its distorted mu2-C,N-bound structure was determined by X-ray analysis. The reaction profiles for the isomerization of 3 includes the generation- and temperature-dependent decays of dimeric species 5 and its diastereomer 6, which strongly suggests that the intra- and intermolecular pathways are included in the C-to-N isomerization. The intramolecular process of the C-to-N isomerization of 3 has been confirmed by the kinetic studies on the isomerization of 3 with excess amount of PPh3 in benzene-d6 at 333-348 K which afford the first-order kinetics with the activation parameters of DeltaH = 121 +/- 1 kJ.mol-1 and DeltaS = 42 +/- 4 J.K-1.mol-1. Treatment of 5 with PPh3 in boiling benzene gives rise to the quantitative formation of N-bound complex 4. The controlled kinetic experiments on the cleavage of 5 with PPh3 have concluded that the cleavage of 5 with PPh3 proceeds via simultaneous C-Ru and N-Ru bond scissions, indicating the temperature-dependent participation of intermolecular process in the C-to-N isomerization of 3.     

The use of 1,2-dipiperidinoacetylene for the preparation of monometallic diaminoacetylene and homo- or heterobimetallic diaminodicarbene ruthenium(II) complexes

The reaction of the ynediamine 1,2-dipiperidinoacetylene (1) with [(η(2)-COE)Cr(CO)(5)], [(THF)W(CO)(5)] and [RuCl(2)(η(6)-cymene)](2) afforded homobimetallic complexes 2a, 2b and 3, in which the diaminoacetylene 1 acts as a bis(aminocarbene) ligand by bridging two complex fragments Cr(CO)(5) (in 2a), W(CO)(5) (in 2b) and RuCl(2)(η(6)-cymene) (in 3). The reaction of 1 with [RuCl(2)(PPh(3))(3)] gave trans-[(1)RuCl(PPh(3))(2)]Cl, [4]Cl, in which the alkyne 1 coordinates as a 4-electron donor ligand. The cation 4 represents a rare example of a square-planar Ru(II) complex with a low-spin ground state (S = 0), and its stability can be ascribed to the strong alkyne-metal π-interaction as confirmed by DFT calculations. Treatment with one or two equivalents of NaBPh(4) in acetonitrile gave [4]BPh(4) and the dicationic [(1)Ru(PPh(3))(2)(CH(3)CN)(2)](BPh(4))(2), [5](BPh(4))(2). [4]Cl can be used for the preparation of heterobimetallic Ru-Pd bis(aminocarbene) complexes by reaction with [(MeCN)(2)PdCl(2)], resulting in the formation of bimetallic 6 and tetrametallic 7.     

Diimine-acetylide compounds of ruthenium: the structural and spectroscopic effects of oxidation

The reaction of Ru(Me(2)bipy)(PPh(3))(2)Cl(2) 1 with terminal alkynes HCCR in the presence of TlPF(6) leads to the formation of the vinylidene compounds [Ru(Me(2)bipy)(PPh(3))(2)Cl(=C=CHR)][PF(6)] (2) (2a, R = Bu(t); 2b, R = p-C(6)H(4)-Me; 2c, R = Ph). These compounds decompose in oxygenated solution to form the carbonyl compound [Ru(Me(2)bipy)(PPh(3))(2)Cl(CO)][PF(6)] (3), and may be deprotonated by K(2)CO(3) to give the ruthenium(II) terminal acetylide compounds Ru(Me(2)bipy)(PPh(3))(2)Cl(CC-R) (4) (4a, R = Bu(t); 4b, R = p-C(6)H(4)-Me; 4c, R = Ph). Cyclic voltammetry shows that 2a-c may also be reductively dehydrogenated to form 4a-c. 4a-c are readily oxidized to their ruthenium(III) analogues [4a](+)-[4c](+), and the changes seen in their UV/visible spectra upon performing this oxidation are analyzed. These show that whereas the UV/visible spectra of 4a-c show MLCT bands from the ruthenium atom to the bipyridyl ligand, those of [4a](+)-[4c](+) contain LMCT bands originating on the acetylide ligands. This is in agreement with the IR and ESR spectra of [4a](+)-[4c](+). The X-ray crystal structures of the redox pair 4a and [4a][PF(6)()] have been determined, allowing the bonding within the metal-acetylide unit to be analyzed, and an attempt is made to determine Lever electrochemical parameters (E(L)) for the vinylidene and acetylide ligands seen herein. Room temperature luminescence measurements on 4a-c show that the compounds are not strongly emissive.     

Homobinuclear cyanide-bridged linkage isomers containing the redox-active unit [(micro-XY)Ru(CO)2L(o-O2C6Cl4)] (XY=CN or NC)

The salts [NEt4][Ru(CN)(CO)2L(o-O2C6Cl4)] {L=PPh3 or P(OPh)3}, which undergo one-electron oxidation at the catecholate ligand to give neutral semiquinone complexes [Ru(CN)(CO)2L(o-O2C6Cl4)], react with the dimers [{Ru(CO)2L(micro-o-O2C6Cl4)}2] {L=PPh3 or P(OPh)3} to give [NEt4][(o-O2C6Cl4)L(OC)2Ru(micro-CN)Ru(CO)2L'(o-O2C6Cl4)] {L or L'=PPh3 or P(OPh)3}. The cyanide-bridged binuclear anions are, in turn, reversibly oxidised to isolable neutral and cationic complexes [(o-O2C6Cl4)L(OC)2Ru(micro-CN)Ru(CO)2L'(o-O2C6Cl4)] and [(o-O2C6Cl4)L(OC)2Ru(micro-CN)Ru(CO)2L'(o-O2C6Cl4)]+ which contain one and two semiquinone ligands respectively. Structural studies on the redox pair [(o-O2C6Cl4)(Ph3P)(OC)2Ru(micro-CN)Ru(CO)2(PPh3)(o-O2C6Cl4)]- and [(o-O2C6Cl4)(Ph3P)(OC)2Ru(micro-CN)Ru(CO)2(PPh3)(o-O2C6Cl4)] confirm that the C-bound Ru(CO)2(o-O2C6Cl4) fragment is oxidised first. Uniquely, [(o-O2C6Cl4){(PhO)3P}(OC)2Ru(micro-CN)Ru(CO)2(PPh3)(o-O2C6Cl4)]- is oxidised first at the N-bound fragment, indicating that it is possible to control the site of electron transfer by tuning the co-ligands. Crystallisation of [(o-O2C6Cl4)(Ph3P)(OC)2Ru(micro-CN)Ru(CO)2{P(OPh)3}(o-O2C6Cl4)] resulted in the formation of an isomer in which the P(OPh)3 ligand is cis to the cyanide bridge, contrasting with the trans arrangement of the X-Ru-L fragment in all other complexes of the type RuX(CO)2L(o-O2C6Cl4).     

Primary and secondary phosphine complexes of iron porphyrins and ruthenium phthalocyanine: synthesis, structure, and P-H bond functionalization

Reduction of [Fe(III)(Por)Cl] (Por = porphyrinato dianion) with Na2S2O4 followed by reaction with excess PH2Ph, PH2Ad, or PHPh2 afforded [Fe(II)(F20-TPP)(PH2Ph)2] (1a), [Fe(II)(F20-TPP)(PH2Ad)2] (1b), [Fe(II)(F20-TPP)(PHPh2)2] (2a), and [Fe(II)(2,6-Cl2TPP)(PHPh2)2] (2b). Reaction of [Ru(II)(Pc)(DMSO)2] (Pc = phthalocyaninato dianion) with PH2Ph or PHPh2 gave [Ru(II)(Pc)(PH2Ph)2] (3a) and [Ru(II)(Pc)(PHPh2)2] (4). [Ru(II)(Pc)(PH2Ad)2] (3b) and [Ru(II)(Pc)(PH2Bu(t))2] (3c) were isolated by treating a mixture of [Ru(II)(Pc)(DMSO)2] and O=PCl2Ad or PCl2Bu(t) with LiAlH4. Hydrophosphination of CH2=CHR (R = CO2Et, CN) with [Ru(II)(F20-TPP)(PH2Ph)2] or [Ru(II)(F20-TPP)(PHPh2)2] in the presence of (t)BuOK led to the isolation of [Ru(II)(F20-TPP)(P(CH2CH2R)2Ph)2] (R = CO2Et, 5a; CN, 5b) and [Ru(II)(F20-TPP)(P(CH2CH2R)Ph2)2] (R = CO2Et, 6a; CN, 6b). Similar reaction of 3a with CH2=CHCN or MeI gave [Ru(II)(Pc)(P(CH2CH2CN)2Ph)2] (7) or [Ru(II)(Pc)(PMe2Ph)2] (8). The reactions of 4 with CH2=CHR (R = CO2Et, CN, C(O)Me, P(O)(OEt)2, S(O)2Ph), CH2=C(Me)CO2Me, CH(CO2Me)=CHCO2Me, MeI, BnCl, and RBr (R = (n)Bu, CH2=CHCH2, MeC[triple bond]CCH2, HC[triple bond]CCH2) in the presence of (t)BuOK afforded [Ru(II)(Pc)(P(CH2CH2R)Ph2)2] (R = CO2Et, 9a; CN, 9b; C(O)Me, 9c; P(O)(OEt)2, 9d; S(O)2Ph, 9e), [Ru(II)(Pc)(P(CH2CH(Me)CO2Me)Ph2)2] (9f), [Ru(II)(Pc)(P(CH(CO2Me)CH2CO2Me)Ph2)2] (9g), and [Ru(II)(Pc)(PRPh2)2] (R = Me, 10a; Bu(n), 10b; Bn, 10c; CH2CH=CH2, 10d; CH2C[triple bond]CMe, 10e; CH=C=CH2, 10f). X-ray crystal structure determinations revealed Fe-P distances of 2.2597(9) (1a) and 2.309(2) A (2bx 2 CH2Cl2) and Ru-P distances of 2.3707(13) (3b), 2.373(2) (3c), 2.3478(11) (4), and 2.3754(10) A (5b x 2 CH2Cl2). Both the crystal structures of 3b and 4 feature intermolecular C-H...pi interactions, which link the molecules into 3D and 2D networks, respectively.     

Organo-tricyanoborates as tectons: illustrative coordination polymers based on copper(I) derivatives

The first systematic study on the use of tricyanoborates as ligands is presented. The tricyanoborates [RB(CN)3]- (R = oct and Ph) can be prepared by direct cyanation of RBCl2 precursors as well as by thermolysis of the corresponding isocyanides [RB(NC)3]-. The first organo-cyanogallates [RGa(CN)3]- (R = Bu, C6H2-2,4,6-Me3) were prepared from the corresponding dichloride, the structure of Et4N[mesGa(CN3] being confirmed crystallographically. The reaction of equimolar [RB(CN)3]- (R = oct, Ph) and [Cu(MeCN)4]+ afforded two-dimensional polymers [RB(CN)3Cu(NCMe)]. The sheets arise via conjoined hexagonal B3Cu3(CN)6 rings with chair conformations. The reaction of excess [PhB(CN)3]- and [Cu(MeCN)4]+ gives the polymer [K(18-crown-6)]{Cu[PhB(CN)3]2}. Treatment of [PhB(CN)3]- with [Cu(PCy3)2(NCMe)x]PF6 gave the one-dimensional polymer [PhB(CN)3Cu(PCy3)2], wherein two of the three BCN substituents are coordinated.     

Preparation of hydrido(vinylidene)ruthenium(II) complexes and a one-pot synthesis of Grubbs-type ruthenium carbenes

Treatment of the hydrido(dihydrogen) compound [RuHCl(H2)(PCy3)2] 1 with alkynes RC[triple bond, length as m-dash]CH (R=H, Ph) afforded the hydrido(vinylidene) complexes [RuHCl(=C=CHR)(PCy3)2] 2, 3 which react with HCl or [HPCy3]Cl to give the corresponding Grubbs-type ruthenium carbenes [RuCl2(=CHCH2R)(PCy3)2] 4, 5. The reaction of 2 (R=H) with DCl, or D2O in the presence of chloride sources, led to the formation of [RuCl2(=CHCH2D)(PCy3)2] 4-d1. Based on these observations, a one-pot synthesis of compounds 4 and 5 was developed using RuCl3.3H2O as the starting material. The hydrido(vinylidene) derivative 2 reacted with CF3CO2H and HCN at low temperatures to yield the carbene complexes [RuCl(X)(=CHCH3)(PCy3)2] 6, 7, of which 7 (X=CN) was characterized crystallographically. Salt metathesis of 2 with CF3CO2K and KI led to the formation of [RuH(X)(=C=CH2)(PCy3)2] 8, 9. The bis(trifluoracetato) and the diiodo compounds [RuX2(=CHCH3)(PCy3)2] 10, 11 as well as the new phosphine P(thp)3 12 (thp=4-tetrahydropyranyl) and the corresponding complex [RuCl2(=CHCH3){P(thp)3}2] 14 were also prepared. The catalytic activity of the ruthenium carbenes 4-7, 10, 11 and 14 in the olefin cross-metathesis of cyclopentene and allyl alcohol was investigated.     

Strong agostic-type interactions in ruthenium benzylidene complexes containing 7-azaindole based scorpionate ligands

The complexes [Ru(Tai)Cl{=C(H)Ph}(PCy(3))] (4) and [Ru((Ph)Bai)Cl{=C(H)Ph}(PCy(3))] (5) [where Tai = HB(7-azaindolyl)(3) and (Ph)Bai = Ph(H)B(7-azaindolyl)(2)] have been prepared and structurally characterised. The borohydride unit is located in the coordination site trans to the chloride ligand in both complexes. The degree of interaction between the borohydride group and the metal centre was found to be significantly large in both cases. Thermolysis reactions involving complex 4 led to a dehydrogenation reaction forming [Ru(Tai)Cl{PCy(2)(η(2)-C(6)H(9))}] (6) where the benzylidene group acts as a hydrogen acceptor.     

Large effects of ion pairing and protonic-hydridic bonding on the stereochemistry and basicity of crown-, azacrown-, and cryptand-222-potassium salts of anionic tetrahydride complexes of iridium(III)

The compounds [K(Q)][IrH(4)(PR(3))(2)] (Q = 18-crown-6, R = Ph, (i)Pr, Cy; Q = aza-18-crown-6, R = (i)Pr; Q = 1,10-diaza-18-crown-6, R = Ph, (i)Pr, Cy; Q = cryptand-222, R = (i)Pr, Cy) were formed in the reactions of IrH(5)(PR(3))(2) with KH and Q. In solution, the stereochemistry of the salts of [IrH(4)(PR(3))(2)](-) is surprisingly sensitive to the countercation: either trans as the potassium cryptand-222 salts (R = Cy, (i)Pr) or exclusively cis (R = Cy, Ph) as the crown- and azacrown-potassium salts or a mixture of cis and trans (R = (i)Pr). There is IR evidence for protonic-hydridic bonding between the NH of the aza salts and the iridium hydride in solution. In single crystals of [K(18-crown-6)][cis-IrH(4)(PR(3))(2)] (R = Ph, (i)Pr) and [K(aza-18-crown-6)][cis-IrH(4)(P(i)Pr(3))(2)], the potassium bonds to three hydrides on a face of the iridium octahedron according to X-ray diffraction studies. Significantly, [K(1,10-diaza-18-crown-6)][trans-IrH(4)(P(i)Pr(3))(2)] crystallizes in a chain structure held together by protonic-hydridic bonds. In [K(1,10-diaza-18-crown-6)][cis-IrH(4)(PPh(3))(2)], the potassium bonds to two hydrides so that one NH can form an intra-ion-pair protonic-hydridic hydrogen bond while the other forms an inter-ion-pair NH.HIr hydrogen bond to form chains through the lattice. Thus, there is a competition between the potassium and NH groups in forming bonds with the hydrides on iridium. The more basic P(i)R(3) complex has the lower N-H stretch in the IR spectrum because of stronger N[bond]H...HIr hydrogen bonding. The trans complexes have very low Ir-H wavenumbers (1670-1680) due to the trans hydride ligands. The [K(cryptand)](+) salt of [trans-IrH(4)(P(i)Pr(3))(2)](-) reacts with WH(6)(PMe(2)Ph)(3) (pK(alpha)(THF) 42) to give an equilibrium (K(eq) = 1.6) with IrH(5)(P(i)Pr(3))(2) and [WH(5)(PMe(2)Ph)(3)](-) while the same reaction of WH(6)(PMe(2)Ph)(3) with the [K(18-crown-6)](+) salt of [cis-IrH(4)(P(i)Pr(3))(2)](-) has a much larger equilibrium constant (K(eq) = 150) to give IrH(5)(P(i)Pr(3))(2) and [WH(5)(PMe(2)Ph)(3)](-); therefore, the tetrahydride anion displays an unprecedented increase (about 100-fold) in basicity with a change from [K(crypt)](+) to [K(crown)](+) countercation and a change from trans to cis stereochemistry. The acidity of the pentahydrides decrease in THF as IrH(5)(P(i)Pr(3))(2)/[K(crypt)][trans-IrH(4)(P(i)Pr(3))(2)] (pK(alpha)(THF) = 42) > IrH(5)(PCy(3))(2)/[K(crypt)][trans-IrH(4)(PCy(3))(2)] (pK(alpha)(THF) = 43) > IrH(5)(P(i)Pr(3))(2)/[K(crown)][cis-IrH(4)(P(i)Pr(3))(2)] (pK(alpha)(THF) = 44) > IrH(5)(PCy(3))(2)/[K(crown)][cis-IrH(4)(PCy(3))(2)]. The loss of PCy(3) from IrH(5)(PCy(3))(2) can result in mixed ligand complexes and H/D exchange with deuterated solvents. Reductive cleavage of P-Ph bonds is observed in some preparations of the PPh(3) complexes.     

Ruthenium(II) polypyridyl complexes: potential precursors, metalloligands, and topo II inhibitors

Neutral and cationic mononuclear complexes containing both group 15 and polypyridyl ligands [Ru(kappa3-tptz)(PPh3)Cl2] [1; tptz=2,4,6-tris(2-pyridyl)-1,3,5-triazine], [Ru(kappa3-tptz)(kappa2-dppm)Cl]BF4 [2; dppm=bis(diphenylphosphino)methane], [Ru(kappa3-tptz)(PPh3)(pa)]Cl (3; pa=phenylalanine), [Ru(kappa3-tptz)(PPh3)(dtc)]Cl (4; dtc=diethyldithiocarbamate), [Ru(kappa3-tptz)(PPh3)(SCN)2] (5) and [Ru(kappa3-tptz)(PPh3)(N3)2] (6) have been synthesized. Complex 1 has been used as a metalloligand in the synthesis of homo- and heterodinuclear complexes [Cl2(PPh3)Ru(micro-tptz)Ru(eta6-C6H6)Cl]BF4 (7), [Cl2(PPh3)Ru(mu-tptz)Ru(eta6-C10H14)Cl]PF6 (8), and [Cl2(PPh3)Ru(micro-tptz)Rh(eta5-C5Me5)Cl]BF4 (9). Complexes 7-9 present examples of homo- and heterodinuclear complexes in which a typical organometallic moiety [(eta6-C6H6)RuCl]+, [(eta6-C10H14)RuCl]+, or [(eta5-C5Me5)RhCl]+ is bonded to a ruthenium(II) polypyridine moiety. The complexes have been fully characterized by elemental analyses, fast-atom-bombardment mass spectroscopy, NMR (1H and 31P), and electronic spectral studies. Molecular structures of 1-3, 8, and 9 have been determined by single-crystal X-ray diffraction analyses. Complex 1 functions as a good precursor in the synthesis of other ruthenium(II) complexes and as a metalloligand. All of the complexes under study exhibit inhibitory effects on the Topoisomerase II-DNA activity of filarial parasite Setaria cervi and beta-hematin/hemozoin formation in the presence of Plasmodium yoelii lysate.     

Dihydrogen activation by a diruthenium analogue of the Fe-only hydrogenase active site

The photochemical reaction of Ru2(S2C3H6)(CO)4(PCy3)2 (1) and H2 gives the dihydride Ru2(S2C3H6)(mu-H)(H)(CO)3(PCy3)2 (2). NMR and crystallographic studies reveal mutually trans basal phosphine ligands and both bridging and terminal hydrides. Ru2(S2C2H4)(CO)4(PCy3)2 behaves similarly. Other HX substrates undergo photoaddition to 1, affording Ru2(S2C3H6)(mu-H)(X)(CO)3(PCy3)2 for X = OTs (3a), Cl (3b), and SPh (3c). Treatment of Ru2(S2C3H6)(mu-H)(H)(CO)3(PCy3)2 with [H(OEt2)]BArF4 (ArF = B(C6H3-3,5-(CF3)2) in CD2Cl2 gives [Ru2(S2C3H6)(mu-H)(CO)3(PCy3)2(H2)]+ (4), which catalyzes H2-D2 exchange. The reaction of 2 with [D(OEt2)]BArF4 gave [Ru2(S2C3H6)(mu-H)(CO)3(PCy3)2(HD)]+ (JH-D = 31 Hz). These studies provide the first models for the Fe-only hydrogenases that bear dihydrogen and terminal hydrido ligands.     

Preparation and characterization of diarylphosphazene and diarylphosphinohydrazide complexes of titanium, tungsten and ruthenium and phosphorylketimido complexes of rhenium

Reaction of the proligand Ph2PN(SiMe3)2 (L1) with WCl6 gives the oligomeric phosphazene complex [WCl4(NPPh2)]n, 1 and subsequent reaction with PMe2Ph or NBu4Cl gives [WCl4(NPPh2)(PMe2Ph)] (2) or [WCl5(NPPh2)][NBu4] (3), respectively. DF calculations on [WCl5(NPPh2)][NBu4] show a W=N double bond (1.756 A) and a P-N bond distance of 1.701 A, which combined with the geometry about the P atom suggests, there is no P-N multiple bonding. Reaction of L1 with [ReOX3(PPh3)2] in MeCN (X = Cl or Br) gives [ReX2(NC(CH3)P(O)Ph2)(MeCN)(PPh3)](X = Cl, 4, X = Br, 5) which contains the new phosphorylketimido ligand. It is bound to the rhenium centre with a virtually linear Re-N-C arrangement (Re-N-C angle = 176.6 degrees, when X = Cl) and there is multiple bonding between Re and N (Re-N = 1.809(7) A when X = Cl). The proligand Ph2PNHNMe2(L2H) reacts with [(C5H5)TiCl3] to give [(C5H5)TiCl2(Me2NNPPh2)] (6). An X-ray crystal structure of the complex shows the ligand (L2) is bound by both nitrogen atoms. Reaction of the proligands Ph2PNHNR2[R2 = Me2 (L2H), -(CH2CH2)2NCH3 (L3H), (CH2CH2)2CH2 (L4H)] with [{RuCl(mu-Cl)(eta6-p-MeC6H4iPr)}2] gave [RuCl2(eta6-p-MeC6H4iPr)L] {L = L2H (7), L3H (8), L4H (9)}. The X-ray crystal structures of 7-9 confirmed that the phosphinohydrazine ligand is neutral and bound via the phosphorus only. Reaction of complexes 7-9 with AgBF4 resulted in chloride ion abstraction and the formation of the cationic species [RuCl(6-p-MeC6H4iPr)(L)]+ BF4- {(L = L2H (10), L3H (11), L4H (12)}. Finally, reaction of complex 6 with [{RuCl(mu-Cl)(eta6-p-MeC6H4iPr)}2] gave the binuclear species [(eta6-p-MeC6H4iPr)Cl2Ru(mu2,eta3-Ph2PNNMe2)TiCl2(C5H5)], 13.     

Chemical control on the coordination mode of benzaldehyde semicarbazone ligands. synthesis, structure, and redox properties of ruthenium complexes

Reaction of benzaldehyde semicarbazone (HL-R, where H is a dissociable proton and R is a substituent (R = OMe, Me, H, Cl, NO(2)) at the para position of the phenyl ring) with [Ru(PPh(3))(3)Cl(2)] and [Ru(PPh(3))(2)(CO2)Cl2] has afforded complexes of different types. When HL-NO(2) and [Ru(PPh(3))(3)Cl2] react in solution at ambient temperature, trans-[Ru(PPh(3))(2)(L-NO2Cl] is obtained. Its structure determination by X-ray crystallography shows that L-NO2 is coordinated as a tridentate C,N,O-donor ligand. When reaction between HL-NO2 and [Ru(PPh(3))(3)Cl2] is carried out in refluxing ethanol, a more stable cis isomer of [Ru(PPh(3))(2)(L-NO2)Cl] is obtained. The trans isomer can be converted to the cis isomer simply by providing appropriate thermal energy. Slow reaction of HL-R with [Ru(PPh(3))(2)(CO2)Cl2] in solution at ambient temperature yields 5-[Ru(PPh(3))(2)(L-R)(CO)Cl] complexes. A structure determination of 5-[Ru(PPh(3))(2)(L-NO2)(CO)Cl] shows that the semicarbazone ligand is coordinated as a bidentate N,O-donor, forming a five-membered chelate ring. When reaction between HL-R and [Ru(PPh(3))(2)(CO2Cl2] is carried out in refluxing ethanol, the 4-[Ru(PPh(3))(2)(L-R)(CO)Cl] complexes are obtained. A structure determination of 4-[Ru(PPh(3))(2)(L-NO2)(CO)Cl] shows that a semicarbazone ligand is bound to ruthenium as a bidentate N,O-donor, forming a four-membered chelate ring. All the complexes are diamagnetic (low-spin d(6), S = 0). The trans- and cis-[Ru(PPh(3))(2)(L-NO2)Cl] complexes undergo chemical transformation in solution. The 5- and 4-[Ru(PPh(3))(2)(L-R)(CO)Cl] complexes show sharp NMR signals and intense MLCT transitions in the visible region. Cyclic voltammetry of the 5-[Ru(PPh(3))(2)(L-R)(CO)Cl] and 4-[Ru(PPh(3))(2)(L-R)(CO)Cl] complexes show the Ru(II)-Ru(III) oxidation to be within 0.66-1.07 V. This oxidation potential is found to linearly correlate with the Hammett constant of the substituent R.     

New iridacyclohexadienes and iridabenzenes by [2+2+1] cyclotrimerization of alkynes and facile interconversion between iridacyclohexadienes and iridabenzenes

Iridabenzenes [Ir[=CHCH=CHCH=C(CH2R)](CH3CN)2(PPh3)2]2+ (R=Ph 4 a, R=p-C6H4CH3 4 b) are obtained from the reactions of H+ with iridacyclohexadienes [Ir[-CH=CHCH=CHC(=CH-p-C6H4R')](CO)(PPh3)2]+ (R'=H 3 a, R'=CH3 3 b), which are prepared from [2+2+1] cyclotrimerization of alkynes in the reactions of [Ir(CH3CN)(CO)(PPh3)2]+ with HC[triple chemical bond]CH and HC[triple chemical bond]CR. Iridabenzenes 4 react with CO and CH3CN in the presence of NEt3 to give iridacyclohexadienes [Ir[-CH=CHCH=CHC(=CHR)](CO)2(PPh3)2]+ (6) and [Ir[-CH=CHCH=CHC(=CHR)](CH3CN)2(PPh3)2]+ (7), respectively. Iridacyclohexadienes 6 and 7 also convert to iridabenzenes 4 by the reactions with H+ in the presence of CH3CN. Alkynyl iridacyclohexadienes [Ir[-CH=CHCH=CHC(=CH-p-C6H4R')](-C[triple chemical bond]CH)(PPh3)2] (8) undergo a cleavage of C[triple chemical bond]C bond by H+/H2O to produce [Ir[-CH=CHCH=CHC(=CH-p-C6H4R')](-CH3)(CO)(PPh3)2] (10) via facile inter-conversion between iridacyclohexadienes and iridabenzenes.     

Synthesis, crystal structures, and reactivity of osmium(II) and -(IV) complexes containing a dithioimidodiphosphinate ligand

Reduction of trans-[OsL2(O)2] (1) (L-=[N(i-Pr2PS)2]-) with hydrazine hydrate afforded a dinitrogen complex 2, possibly "[OsL2(N2)(solv)]" (solv=H2O or THF), which reacted with RCN, R'NC, and SO2 to give trans-[OsL2(RCN)2] (R=Ph (3), 4-tolyl (4), 4-t-BuC6H4 (5)), trans-[OsL2(R'NC)2] (R'=2,6-Me2C6H3 (xyl) (6), t-Bu (7)), and [Os(L)2(SO2)(H2O)] (8) complexes, respectively. Protonation of compounds 2, 3, and 6 with HBF4 led to formation of dicationic trans-[Os(LH)2(N2)(H2O)][BF4]2 (9), trans-[Os(LH)2(PhCN)2][BF4]2 (10), and trans-[Os(LH)2(xylNC)2][BF4]2 (11), respectively. Treatment of 1 with phenylhydrazine and SnCl2 afforded trans-[OsL2(N2Ph)2] (12) and trans-[OsL2Cl2] (13), respectively. Air oxidation of compound 2 in hexane/MeOH gave the dimethoxy complex trans-[OsL2(OMe)2] (14), which in CH2Cl2 solution was readily air oxidized to 1. Compound 1 is capable of catalyzing aerobic oxidation of PPh3, possibly via an Os(IV) intermediate. The formal potentials for the Os-L complexes have been determined by cyclic voltammetry. The solid-state structures of compounds 4, 6, cis-8, 13, and 14 have been established by X-ray crystallography.     

Synthesis, structures, and properties of ruthenium(II) complexes of N-(1,10-phenanthrolin-2-yl)imidazolylidenes

Mononuclear ruthenium complexes [RuCl(L1)(CH(3)CN)(2)](PF(6)) (2a), [RuCl(L2)(CH(3)CN)(2)](PF(6)) (2b), [Ru(L1)(CH(3)CN)(3)](PF(6))(2) (4a), [Ru(L2)(CH(3)CN)(3)](PF(6))(2) (4b), [Ru(L2)(2)](PF(6))(2) (5), [RuCl(L1)(CH(3)CN)(PPh(3))](PF(6)) (6), [RuCl(L1)(CO)(2)](PF(6)) (7), and [RuCl(L1)(CO)(PPh(3))](PF(6)) (8), and a tetranuclear complex [Ru(2)Ag(2)Cl(2)(L1)(2)(CH(3)CN)(6)](PF(6))(4) (3) containing 3-(1,10-phenanthrolin-2-yl)-1-(pyridin-2-ylmethyl)imidazolylidene (L1) and 3-butyl-1-(1,10-phenanthrolin-2-yl)imidazolylidene (L2) have been prepared and fully characterized by NMR, ESI-MS, UV-vis spectroscopy, and X-ray crystallography. Both L1 and L2 act as pincer NNC donors coordinated to ruthenium (II) ion. In 3, the Ru(II) and Ag(I) ions are linked by two bridging Cl(-) through a rhomboid Ag(2)Cl(2) ring with two Ru(II) extending to above and down the plane. Complexes 2-8 show absorption maximum over the 354-428 nm blueshifted compared to Ru(bpy)(3)(2+) due to strong σ-donating and weak π-acceptor properties of NHC ligands. Electrochemical studies show Ru(II)/Ru(III) couples over 0.578-1.274 V.