氧官能化的膦配体在钯催化的Suzuki-Miyaura反应中的应用

合成了带甲氧基和羟基官能团的二茂铁膦配体, 评价了它们在钯催化的Suzuki-Miyaura偶联反应中的性能, 发现带甲氧基的膦配体对钯催化的Suzuki-Miyaura偶联反应有更好的性能, 可催化富电子溴代芳烃和缺电子氯代芳烃与苯硼酸反应高产率地生成相应的联芳烃产物.     

在催化体系可回收和无配体条件下溴化四丁基铵中钯催化卤代芳烃与芳基硼酸的Suzuki-Miyaura交叉偶联反应

我们发展一种在催化体系可回收和无配体条件下溴化四丁基铵（TBAB）中钯催化卤代芳烃与芳基硼酸的Suzuki-Miyaura交叉偶联反应方法。我们发现水的量对反应有很大的影响。当水的用量为1 %（质量比）时,反应的结果最好。在3 mol%的醋酸钯和1.5 g的TBAB（含1%的水）,一系列卤代芳烃与芳基硼酸的顺利地发生Suzuki-Miyaura交叉偶联反应,得到中等及良好的产率。而且在溴代芳烃和活泼的氯代芳烃的交叉反应中,Pd(OAc)2/TBAB催化体系可以回收重复使用多次,并且催化活性基本不变。     

以羰基磷氧化物为配体的铜催化的C-S偶联反应

以邻溴苯甲醛为原料合成了一系列的羰基磷氧化物,用作铜催化的C-S偶联反应的新配体.在较温和的反应条件下可成功催化碘代芳烃或溴代芳烃与硫醇的偶联反应,收率最高达99%.     

氯化钯多相催化无配体室温Suzuki-Miyaura反应

本文报道了温和及有效的氯化钯多相催化无配体Suzuki-Miyaura反应,反应在室温、敞口容器和短时间内完成。各种碘代芳烃、溴代芳烃和活泼的氯代芳烃与四苯硼钠和芳香有机硼酸偶联高产率生成相应的产物,而且催化剂可循环使用4次不降低活性。     

新型氮杂环卡宾-钯配合物的设计、制备及在Buchwald-Hartwig交叉偶联反应中的应用

发展了一类含有不同亚胺配体的氮杂环卡宾-钯配合物,并将其应用到Buchwald-Hartwig交叉偶联反应中.研究发现亚胺配体的结构对催化活性有明显的影响,尤其带有强吸电子基团的亚胺配体表现最佳.利用该类配合物可以在低至0.5 mol%的催化剂用量下实现不同氯代芳烃和各种胺的高效偶联反应.     

1-苯基-3-甲基-4-苯甲酰基吡唑啉酮/PdCl2在温和条件下催化Suzuki偶联反应的研究

考察了商品化的简单非膦配体1-苯基-3-甲基-4-苯甲酰基吡唑啉酮在有氧温和条件下的Suzuki偶联反应活性,探讨了反应温度、反应时间、溶剂以及碱对反应的影响。结果表明,该配体在优化的反应条件下能高效催化不同溴代反应物和氯代反应物与苯硼酸的交叉偶联反应;提高反应温度、延长反应时间和引入质子性极性有机/水混合溶剂有利于偶联反应的进行。     

Pd/MgO:一种基于芳香羧酸脱羧与卤代芳烃的交叉偶联反应体系的可循环的多相催化剂(英文)

发展了钯多相催化剂Pd/MgO(0.5 mol%Pd)参与的芳基羧酸脱羧与卤代芳烃的偶联反应体系.在与溴代芳烃甚至氯代芳烃的偶联反应中,缺电子和富电子的芳基羧酸均能进行脱羧,并以高收率得到目标产物.该体系采用的负载型钯多相催化剂制备方法简单易行,可多次循环使用,能便捷地应用于脱羧偶联的有机合成反应.     

新型联吡啶配体P-Phos在钯催化胺偶联反应中的应用

P-Phos [2,2′6,6′-四甲氧基吡啶-4,4′-二(二苯基膦)-3,3′-联吡啶]是一类对空气稳定的杂环磷配体。本文以较简单的方法合成了rac-P-Phos配体,并用IR、1H NMR、13C NMR和元素分析等方法进行了表征。首次将P-Phos配体用于催化卤代芳烃和胺的偶联反应中。通过对碱、溶剂和催化剂用量等的筛选,确立了最优化的反应条件。配体对溴代芳烃的催化效果很好,对具有吸电子存在的氯代芳烃,特别是氯代吡啶同样得到了令人满意的结果,分离产率高达97％。催化剂对水和空气的稳定性很好,对胺偶联反应的催化效果很理想,因此是一种有应用前景的催化剂。     

1,3-二烷基咪唑啉/Pd催化卤代芳烃的Heck和Suzuki反应

合成并表征了一种新型的有空间需求的N-杂环卡宾前驱体 1,3-二烷基咪唑啉盐. 这些咪唑啉盐与乙酸钯结合形成的高活性催化剂,可在温和条件下催化氯代和溴代芳烃的He ck和Suzuki交叉偶联反应.     

氯化钯在氟化四丁基铵中当场生成纳米钯：一种高效、可回收的催化体系，在无配体和无溶剂条件下催化Suzuki-Miyaura反应

氯化钯在氟化四丁基铵中当场生成纳米钯,该钯催化剂在Suzuki-Miyaura交叉偶联反应中显示很高的催化效率。在氯化钯和氟化四丁基铵存在下,许多芳基卤代烃可以顺利与芳基硼酸发生偶联反应,得到中等到高的产率。此外,在Suzuki-Miyaura偶联反应中该氯化钯/氟化四丁基铵催化体系可以回收重复使用多次,并且芳基溴代烃可以在15-60分钟内反应完全。值得指出的是,该反应是在无溶剂、无配体和催化体系可回收重复使用的条件下进行的。这和无配体条件下TBAB中钯催化卤代芳烃与芳基硼酸的Suzuki-Miyaura交叉偶联反应方法。该氯化钯/氟化四丁基铵催化反应的反应机理也进行了讨论。     

钯和四齿膦配体催化剂应用于Heck反应的研究

设计合成了以联萘二胺为骨架的四齿膦配体N,N,N',N'-四(二苯基膦甲基)-(1,1'-联萘)-2,2'-二胺,并将其与钯组成的催化体系用于苯乙烯和芳卤的Heck反应,该催化体系对各种卤代芳烃都表现出了很高的催化活性.对活化底物对溴苯腈,即使底物与催化剂的物质的量比达到10 000,反应20 h几乎能达到定量转化;该催化体系对活性更低的杂环底物也取得了良好的催化效果.     

A general and efficient copper catalyst for the amidation of aryl halides

An experimentally simple and inexpensive catalyst system was developed for the amidation of aryl halides by using 0.2-10 mol % of CuI, 5-20 mol % of a 1,2-diamine ligand, and K(3)PO(4), K(2)CO(3), or Cs(2)CO(3) as base. Catalyst systems based on N,N'-dimethylethylenediamine or trans-N,N'-dimethyl-1,2-cyclohexanediamine were found to be the most active even though several other 1,2-diamine ligands could be used in the easiest cases. Aryl iodides, bromides, and in some cases even aryl chlorides can be efficiently amidated. A variety of functional groups are tolerated in the reaction, including many that are not compatible with Pd-catalyzed amidation or amination methodology.     

Synthesis,characterization, and immobilization of nickel(II) tetradentate Schiff-base complexes on clay as heterogeneous catalysts for the oxidation of cyclooctene

Nickel(II) tetradentate Schiff-base complexes of N,N′-(bis(pyridin-2-yl)formylidene)ethane-1,2-diamine (L1), N,N′-(bis(pyridin-2-yl)formylidene)cyclohexane-1,2-diamine (L2), N,N′-(bis(pyridin-2-yl)formylidene)benzene-1,2-diamine (L3), N,N′-(bis(pyridin-2-yl)formylidene)meso-stilben-1,2-diamine (L4), and N,N′-(bis(pyridin-2-yl)formylidene)propane-1,3-diamine (L5) were synthesized, characterized, and immobilized on sodium montmorillonite. The complexes were characterized by IR spectroscopy, diffuse reflectance spectra (DRS), and atomic absorption spectroscopy (AAS). IR and DRS data of the heterogeneous catalysts show that the Ni(II) complexes were physically entrapped within the sodium montmorillonite clay. The supported complexes show good catalytic activity for the epoxidation of cyclooctene using tert-butylhydroperoxide (TBHP) as oxygen source in acetonitrile. The Ni-catalyzed oxidation proceeds with 62.3% selectivity for epoxidation with 69% conversion for supported [Ni(L5)].     

Tetraphosphine/palladium‐catalyzed Suzuki–Miyaura coupling of heteroaryl halides with 3‐pyridine‐ and 3‐thiopheneboronic acid: an efficient catalyst for the formation of biheteroaryls

An easily prepared tetraphosphine N,N,N′,N′‐tetra(diphenylphosphinomethyl)‐1,2‐ethylenediamine (L1) associated with [Pd(η³‐C₃H₅)Cl]₂ affords an efficient catalyst for Suzuki–Miyaura coupling of 3‐pyridineboronic acid with heteroaryl bromides. Reaction could be performed with as little as 0.02 mol% catalyst and a high turnover number of 2500 is obtained. A wide range of substrates is investigated with satisfactory yields, and good compatibility with aminogroup‐substituted pyridines and unprotected indole is exhibited. This protocol can also be applied successfully to the reaction of heteroaryl bromides with 3‐thiopheneboronic acid. This Pd‐tetraphosphine catalyst efficiently restrains the poisoning effect from heteroaryls, and shows good stability and longevity. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and metal complexes of chiral c(2)-symmetric diamino-bisoxazoline ligands

A synthetic route to tetradentate chiral N(4) ligands has been developed with the aim to study the potential of corresponding iron and manganese complexes as catalysts for enantioselective epoxidation. These ligands, which contain two oxazoline rings and two trialkylamino groups as coordinating units, are readily prepared in enantiomerically pure form by the reaction of chiral 2-chloromethyloxazolines with achiral N,N'-dimethylethane-1,2-diamine or chiral (R,R)-N,N'-dimethylcyclohexane-1,2-diamine. The ligands derived from N,N'-dimethylethane-1,2-diamine reacted with anhydrous metal halides MnCl(2) and FeCl(2) in a stereoselective manner to give octahedral mononuclear complexes that have the general formula Delta-[(L)MCl(2)]. In contrast, the ligands derived from N,N'-dimethylcyclohexane-1,2-diamine formed complexes with different coordination modes depending on the diastereomer employed: in one case the metal ion was found to be pentacoordinate, in the other case a hexacoordinated complex was observed. The structure of a series of Fe and Mn complexes was determined by X-ray analysis. The coordination chemistry of these ligands was further studied by X-ray and NMR analyses of the diamagnetic isostructural complexes [(L)ZnCl(2)]. Analogous ionic complexes, which were prepared by removing chloride with silver trifluoromethanesulfonate or hexafluoroantimonate, were tested as catalysts for the epoxidation of olefins.     

Scope and mechanism of enantioselective Michael additions of 1,3-dicarbonyl compounds to nitroalkenes catalyzed by nickel(II)-diamine complexes

Readily prepared Ni(II)-bis[(R,R)-N,N'-dibenzylcyclohexane-1,2-diamine]Br(2) was shown to catalyze the Michael addition of 1,3-dicarbonyl compounds to nitroalkenes at room temperature in good yields with high enantioselectivities. The two diamine ligands in this system each play a distinct role: one serves as a chiral ligand to provide stereoinduction in the addition step while the other functions as a base for substrate enolization. Ligand modification within the catalyst was also investigated to facilitate the reaction of aliphatic nitroalkenes, 1,3-diketones, and beta-ketoacids. Ni(II)-bis[(R,R)-N,N'-di-p-bromo-benzylcyclohexane-1,2-diamine]Br(2) was found to be an effective catalyst in these instances. Furthermore, monodiamine complex, Ni(II)-[(R,R)-N,N'-dibenzylcyclohexane-1,2-diamine]Br(2), catalyzed the addition reaction in the presence of water. The proposed model for stereochemical induction is shown to be consistent with X-ray structure analysis.     

Asymmetric hydrogenation of aromatic ketones using polymeric catalyst prepared from polymer-supported 1,2-diamine

tert-Butyloxycarbonyl (Boc) protected chiral 1,2-diamine monomers 3 were copolymerized with achiral vinyl monomers such as styrene, methacrylates, acrylates, methacrylamide, and acrylamide to give crosslinked polymers P2 containing chiral 1,2-diamine moieties. Deprotection of the Boc groups in the polymer afforded the crosslinked chiral 1,2-diamine polymer P3. The diamine polymer was allowed to react with RuCl₂/BINAP in DMF to form polymeric complex. Asymmetric hydrogenation of aromatic ketones smoothly proceeded using the polymeric complex to give the corresponding secondary alcohol in quantitative yield with high level of enantioselectivity up to 98% ee in a mixed solvent of DMF and 2-propanol. The polymeric catalyst can be recycled several times without loss of the activity.     

Preparation of the enantiopure 1,2-diamine monomer and its polymerization: The efficient polymeric chiral ligand of an asymmetric hydrogenation catalyst

An enantiopure 1,2-diamine monomer possessing a p-vinylbenzyl group as a polymerizable group was synthesized from chiral 1,2-bis(p-hydroxyphenyl)-N,N′-bis(tert-butoxycarbonyl)-1,2-diaminoethane. The chiral monomer was copolymerized with styrene, and this was followed by the deprotection of the tert-butoxycarbonyl group, which yielded the polymer-supported chiral 1,2-diamine. The polymeric catalyst system was established with the polymeric chiral 1,2-diamine complexed with 2,2′-bis(diphenylphosphino)-1,1′-binaphthyl/RuCl₂. In the presence of potassium tert-butoxide (t-BuOK), the polymeric catalyst system worked well in the asymmetric hydrogenation of aromatic ketones. The corresponding chiral secondary alcohols were obtained in quantitative yields with a high level of enantioselectivity. The insolubility of the catalyst, caused by the crosslinked structure of the polymer, made it recyclable. The polymeric catalyst was reused several times without a loss of catalytic activity. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4556–4562, 2004     

Synthesis of Novel Polymers with a Chiral 1,2-Diamine Moiety by Polycondensation and their Application to Catalyst for Asymmetric Hydrogenation of Aromatic Ketones

Summary: Novel polymers with chiral 1,2-diamine moiety were successfully synthesized by polycondensation of N-Boc protected enantiopure 1,2-diamine bearing two phenol groups ( S , S )-4 , bisphenol derivatives, and dibromides, followed by deprotection of N-Boc moiety. Hydrogenation of acetophenone was performed with use of polymeric catalyst system prepared from the polymer-supported chiral 1,2-diamine and RuCl₂/(S)-BINAP. The reaction proceeded smoothly even in 2-propanol to give 1-phenylethanol in quantitative yield with high level of enantioselectivity. Furthermore, various other aromatic ketones could be asymmetrically hydrogenated by the polymeric catalyst system.     

Copper-catalyzed double N-alkenylation of amides: an efficient synthesis of di- or trisubstituted N-acylpyrroles

An efficient copper-catalyzed double alkenylation of amides with (1Z,3Z)-1,4-diiodo-1,3-dienes is reported for the first time. The reactions proceed to afford di- or trisubstituted N-acylpyrroles in good to excellent yields using CuI as the catalyst, Cs2CO3 as the base, and rac-trans-N,N'-dimethylcyclohexane-1,2-diamine as the ligand.