Radiation synthesis and characterization of poly(N,N-dimethylaminoethyl methacrylate-co-N-vinyl 2-pyrrolidone) hydrogels

In this study, radiation synthesis and characterization of swelling behavior and network structure of poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA), and poly(N,N-dimethylaminoethyl methacrylate-co-N-vinyl 2-pyrrolidone) (P(DMAEMA-co-VP)), hydrogels were investigated. PDMAEMA and P(DMAEMA-co-VP) hydrogels in the rod forms were prepared by irradiating the ternary mixtures of DMAEMA/VP/cross-linking agent, ethyleneglycol dimethacrylate (EGDMA), by gamma rays at ambient temperature. In composition ranges where the three components were completely miscible, water was also added to the ternary mixture to provide the formation of homogeneous polymerization and gelation. The influence of irradiation dose, comonomer, VP, and cross-linking agent, EGDMA, content on the total percentage gelation and monomer conversion were investigated. The effect of pH and temperature on the swelling behavior of hydrogels have also been examined. Hydrogels showed typical pH response and temperature responses, such as low-pH and low temperature swelling and high-pH and high temperature deswelling. Polymer-solvent interaction parameter (χ) and enthalpy and entropy changes appearing in the χ parameter for the P(DMAEMA-co-VP)-water system were determined by using Flory-Rehner theory of swelling equilibrium. The negative values for ΔH and ΔS indicate that prepared pure PDMAEMA and P(DMAEMA-co-VP) hydrogels have lower critical solution temperature (LCST) and Flory-Rehner theory of swelling equilibrium provides a satisfactory agreement to the experimental swelling data of the hydrogels.     

Synthesis and optical properties of conjugated N,N-dimethyl and thienyl end-capped 2,5-(arylethynyl)thiophene oligomer structures

End-capped (N,N-dimethylaminophenyl) and 2′-thienylethynyl 2,5-thiophene oligomer structures were synthesized by heterocoupling between the terminal acetylenes such as: p-(N,N-dimethylaminophenyl)ethyne (3) [or 1-(p-(N,N-dimethylaminophenyl)-2-p-(ethynylphenyl)ethyne, 4]; p-(β-ethenyl-2′-thienyl)phenylethyne (E-9) [or p-(β-ethynyl-2′-thienyl)phenylethyne, 11], and 2,5-diiodothiophene, catalyzed by the Cl₂Pd(PPh₃)₂/CuI system, in good to excellent yields. The 2,5-di[(3′,5′-di(trimethylsilylethynyl)phenyl]_x-1-ethynyl]thiophene oligomers were prepared by heterocoupling between 3′,5′-di[(trimethylsilylethynyl)phenyl]_x-1-ethyne (n = 0-2) terminal acetylenes and 2,5-diiodothiophene, in excellent yields. The terminal acetylenes were efficiently prepared by a specific protection-deprotection methodology. All the ethynylphenyl compounds obtained show fluorescence radiation emission, with a bathochromic shift of the wavelength that increases with the chain conjugation.     

Dimolybdenum complexes containing anions of N,N′-bis(pyrimidine-2-yl)formamidine and N-(2-pyrimidinyl)formamide

The reactions of Mo₂(O₂CCH₃)₄ with different equivalents of N,N′-bis(pyrimidine-2-yl)formamidine (HL1) and N-(2-pyrimidinyl)formamide (HL2) afforded dimolybdenum complexes of the types Mo₂(O₂CCH₃)(L1)₂(L2) (1) trans-Mo₂(L1)₂(L2)₂ (2) cis-Mo₂(L1)₂(L2)₂ (3) and Mo₂(L2)₄ (4). Their UV–Vis and NMR spectra have been recorded and their structures determined by X-ray crystallography. Complexes 2 and 3 establish the first pair of trans and cis forms of dimolybdenum complexes containing formamidinate ligands. The L1 ligands in 1–3 are bridged to the metal centers through two central amine nitrogen atoms, while the L2 ligands in 1–4 are bridged to the metal centers via one pyrimidyl nitrogen atom and the amine nitrogen atom. The Mo–Mo distances of complexes 1 [2.0951(17) Å], 2 [2.103(1) Å] and 3 [2.1017(3) Å], which contain both Mo?N and Mo?O axial interactions, are slightly longer than those of complex 4 [2.0826(12)–2.0866(10) Å] which has only Mo?O interactions.     

Structure of N,C,N-chelated organotin(IV) fluorides

The set of starting tri-, di- and monoorganotin(IV) halides containing N,C,N-chelating ligand (L^NCN = {1,3-[(CH₃)₂NCH₂]₂C₆H₃}⁻) has been prepared (1-5) and two compounds structurally characterized ([L^NCNPh₂Sn]⁺I₃⁻ (1c), L^NCNSnBr₃ (5)) in the solid state. These compounds were reacted with KF with 18-crown-6, NH₄F or L^CNnBu₂SnF to give derivatives containing fluorine atom(s). Triorganotin(IV) fluorides L^NCNMe₂SnF (2a) and L^NCNnBu₂SnF (3a) revealed monomeric structural arrangement with covalent Sn-F bond both in the coordinating and non-coordinating solvents, except the behaviour of 3a that was ionized in the methanol solution at low temperature. The products of fluorination of L^NCNSnPhCl₂ (4) and 5 were described by NMR in solution as the ionic hypervalent fluorostannates or the oligomeric species reacting with chloroform, methanol or moisture to zwitterionic monomeric stannate L^NCN(H)⁺SnF₄⁻ (5c), which was confirmed by XRD analysis in the solid state.     

Complexation between poly(N,N-diethylacrylamide) and poly(acrylic acid) in aqueous solution

The complexation between poly(N,N-diethylacrylamide) (PDEA) and poly(acrylic acid) (PAA) in aqueous solution was studied by viscometric, potentiometric, and fluorescence techniques. It was found that an interpolymer complex formed between the two polymers through hydrogen bonding interactions with the stoichiometry of r=0.6 (r is unit molar ratio of PAA/PDEA), and the complex formation show the dependence on pH values. The phase behaviour studies showed that the lower critical solution temperature of the PDEA-PAA aqueous solution gradually increased with the increasing of r from 0.01 to 0.15, until a soluble system in the whole temperature region was obtained, which remained in the range of r=0.15-0.3. At higher PAA concentrations, when r is above 0.3, the system appeared phase separation, and almost no temperature dependence was observed. Based on these conclusion and structure characteristics of PDEA and PAA, a model containing only short sequences of monomer residues was proposed for the structure of PDEA-PAA complex.     

Monodisperse and isolated microspheres of poly(N-methylaniline) prepared by dispersion polymerization

Monodisperse and isolated microspheres of poly(N-methylaniline) were successfully prepared through chemical polymerization of N-methylaniline by in adipic acid containing poly(vinylpyrrolidone) (PVP). Mean diameters of the microspheres with smooth surfaces changed from 320 to 100 nm by increasing the reaction temperature from 25 to 75 °C. The concentration of PVP did not affect much the size of microspheres, but the increased PVP concentration led to longer induction times for the onset of dispersion polymerization.     

A versatile synthesis of poly(lauryl acrylate) using N-(n-octyl)-2-pyridylmethanimine in copper mediated living radical polymerization

A facile synthesis of poly(lauryl acrylate) has been achieved by atom transfer radical polymerization using benzyl-2-bromoisobutyrate, copper (I) bromide, and N-(n-octyl)-2-pyridylmethanimine (OPMI). The latter was of great interest as its synthesis was very easy to carry out and as it allowed the reaction mixture to be homogeneous, which was essential for the control of the reaction. The polymerization was controlled under these conditions and was optimized with the addition of copper (II) bromide as deactivator. We proved that the synthesis of poly(lauryl acrylates) with well defined molecular weights and narrow polydispersities was possible using a ligand which does not require difficult synthesis and purification. We also showed the ability of pyridylmethanimine ligands to control ATRP of an acrylate derivative. Best results were obtained at 130 °C in xylene for [Initiator]₀/[Cu(I)Br]₀/[Cu(II)Br₂]₀/[OPMI]/[lauryl acrylate] equal to 1/1/0.05/2.2/181, respectively (M_n = 19,942, DPI = 1.28).     

ESR and pH-potentiometric study of the mixed-ligand complex formation in the copper(II)-4-fluorosalicylic acid-N,N-diethylnicotinamide system: Structure and spectral properties of [Cu(4-fluorosalicylate)2(N,N-diethylnicotinamide)2(H2O)2] complex

EPR simulation method together with pH-potentiometry combined with UV-Vis spectrophotometry were used for the study of the ternary system 4-fuorosalicylic acid (HA)-N,N-diethylnicotinamide (B)-copper(II) in aqueous solution. The N,N-diethylnicotinamide ligand is a weak donor, its mixed-ligand complexes with 4-fluorosalicylate anions are more favoured. The number of coordinated N,N-diethylnicotinamide molecules increases with decreasing temperature: up to four ones were detected in the coordination sphere of copper(II) in frozen solutions. The formation of [CuH₋₁AB₂] and [CuH₋₁A] was detected by all methods at neutral pH. At lower pH values, [CuA₂B₂] and [CuB] become dominant, and this fact is in good agreement with [CuA₂B₂(H₂O)₂] crystals obtained from similar solutions. The structural unit of the [CuA₂B₂(H₂O)₂] complex consists of a copper(II) ion, which is monodentately coordinated by a pair of 4-fluorosalicylate anions and by a pair of N,N-diethylnicotinamide in trans positions in the basal plane, and by two water molecules in the axial positions of a tetragonal bipyramid.     

Pd2dba3/P(i-BuNCH2CH2)3N: a highly efficient catalyst for the one-pot synthesis of trans-4-N,N-diarylaminostilbenes and N,N-diarylaminostyrenes

A Pd₂dba₃/P(i-BuNCH₂CH₂)₃N catalyzed one-pot synthesis of unsymmetrically substituted trans-4-N,N-diarylaminostilbenes and both symmetrically and unsymmetrically substituted N,N-diarylaminostyrene derivatives is reported. The procedure involves two or more palladium catalyzed sequential coupling reactions (an amination and an inter-molecular Heck reaction) in one-pot using the same catalyst system with two different aryl halides, including aryl chlorides and hetero aryl halides as the coupling partners.     

Production of nanoparticles of methyl methacrylate and butyl methacrylate copolymers by microemulsion polymerization in the presence of maleic acid terminated poly(N-acetylethylenimine) macromonomers as cosurfactant

In this study, MMA/BMA copolymer nanoparticles were synthesized in oil-in-water microemulsions that were stabilized by sodium dodecyl sulphate (SDS) and initiated by potassium persulphate KPS. Maleic acid terminated poly(N-acetylethylenimine) (PNAEI) with two different chain lengths was also included in the recipe, as a cosurfactant and a comonomer. FTIR and ¹H-NMR proved incorporation of the macromonomer in the structure. High polymerization yields were achieved upto 98%. The viscosity average molecular weights of the copolymers were in the range of 2.77-5.50 × 10⁵. The glass transition temperatures of these copolymers were between 50.0 and 63.9 °C. The average diameter of nanoparticles were in range of 40-96 nm. It was possible to produce nanoparticles smaller than 100 nm and with narrower size distributions by using much lower concentrations of SDS by including the macromonomers in the microemulsion polymerization recipe.     

Preparation and drug release property of CO2 stimulus-sensitive poly(N, N-dimethylaminoethyl methacrylate)-b-polystyrene nanoparticles

The CO₂ stimulus-sensitive nanoparticles based on poly(N, N-dimethylaminoethyl methacrylate)-b-poly styrene (PDMAEMA-b-PS) were prepared via surfactant-free miniemulsion reversible addition–fragmentation chain transfer (RAFT) polymerization. The as-prepared nanoparticles exhibited core–shell structure with about 120 nm in diameter. Their dispersion/aggregation in water can be adjusted by alternatively bubbling of CO₂ and N₂. Drug release from these nanoparticles can be accelerated (or delayed) by bubbling (or removing) of CO₂.     

Synthesis of the end-capped 5-(N,N-dimethylamino)naphthyl-1-ethynyl derivatives and their 1,4-di[5-(N,N-dimethylamino)naphthyl]-1,3-butadiynes: anti rotamer structure

A new family of the end-capped 5-(N,N-dimethylamino)naphthylethynyl chains were synthesized, as terminal acetylenes or poly(yne) structures, by heterocoupling between 5-iodo-N,N-dimethylnaphthalen-1-amine and 2-methyl-3-butyn-2-ol or 4-(5-iodo-1-naphthyl)-2-methyl-3-butyn-2-ol, catalyzed by the palladium-copper system. Catalytic homocoupling of the terminal acetylenes, affords to 1,4-dinaphthyl-1,3-butadiyne nanostructures. X-ray diffraction analysis of 1,4-di(α-naphthyl)-1,3-butadiyne shows that the naphthalene rings are in the anti configuration along the acetylene axis. All the conjugated compounds show an important fluorescent emission radiation.     

Temperature- and pH-responsive behaviour of poly(2-(2-methoxyethoxy)ethyl methacrylate-co-N,N-dimethylaminoethyl methacrylate) hydrogels

Hydrogels with pH/temperature responsiveness and high water uptake have been synthesized by the free radical polymerization of 2-(2-methoxyethoxy)ethyl methacrylate (MEO₂MA) with N,N-dimethylaminoethyl methacrylate (DMAEMA) in a low proportion. The amphiphilic character of the biocompatible MEO₂MA provides thermo-sensitivity at low temperature. On the other hand, DMAEMA units incorporate ionisable amino groups and hydrophobic moieties, leading by themselves to a dual pH and thermo-sensitive system. Therefore, the combination of both monomers yields an interesting system with tuneable pH/temperature responsiveness and swelling capacity, which depends on composition and ionic strength. Thus, the volume transition temperature (VTT) is suppressed at low pH due to the basic character of DMAEMA. However, at basic pH, where amino groups are not charged, lower swelling capacities and narrow thermal volume transitions were obtained. At neutral pH, higher modulation of both the swelling achieved and VTT was observed.     

Interfacially formed poly(N,N-dimethylaminoethyl methacrylate)/polysulfone composite membranes for CO2/N2 separation

Interfacially formed poly(N,N-dimethylaminoethyl methacrylate)/polysulfone (PDMAEMA/PSF) composite membranes were developed for CO₂/N₂ separation. A layer of PDMAEMA was deposited on a microporous PSF substrate by the solution coating technique, followed by crosslinking with p-xylylene dichloride (XDC) at the interface between the PDMAEMA solid layer and the crosslinking solution. The hydrophilicity and surface free energy of the membranes were analyzed by contact angle measurements with different probe liquids. The permselectivity of the membrane was shown to be affected by the PDMAEMA deposition time, interfacial crosslinking reaction time, and the PDMAEMA and XDC concentrations in the polymer coating solution and the crosslinking solution, respectively. The composite membrane showed a CO₂ permeance of 85 GPU and a CO₂/N₂ ideal separation factor of 50 at 23 °C and 0.41 MPa of CO₂ feed pressure.     

Ru(II) complexes imparting N2O2 donor bis chelating ligand N,N-bis(salicylidine)-hydrazine in unusual coordination mode

The synthesis and characterization of binuclear ruthenium complexes [{(η⁶-C₆H₆)Ru}₂(μ-bsh)₂] (1), [{(η⁶-C₁₀H₁₄)Ru}₂(μ-bsh)₂] (2), [{(η⁶-C₆Me₆)Ru}₂(μ-bsh)₂] (3), and rhodium complex [{(η⁵-C₅Me₅)RhCl}₂(μ-bsh)] (4) (bsh=N,N^′-bis(salicylidine)-hydrazine dianion) are reported. The complexes have been fully characterized by analytical and spectral techniques and unusual coordination mode of the ligand H₂bsh has been confirmed by single crystal X-ray analysis of the complex 2. Structural data revealed extensive inter- and intra-molecular C-H?O and C-H?π interactions and involvement of methyl and isopropyl hydrogen from the p-cymene in hydrogen bonding.     

Synthesis of N,N-di(arylmethylidene)arylmethanediamines by flash vacuum pyrolysis of arylmethylazides

Flash vacuum pyrolysis of arylmethylazides 7a-d gave 2,4-diazapentadienes 5a-d in high yield (76-92%). The thermal cyclization of 5a-d gave cis-imidazolines 1a-d, further heating or Swern oxidation of 1a-d gave dehydrogenated products, imidazoles 2a-d.     

A facile procedure for synthesis of 3-[2-(N,N-dialkylamino)ethyl]-3-fluorooxindoles by direct fluorination of N,N-dialkyltryptamines

A practical procedure for the synthesis of 3-fluorooxindole derivatives having basic amine moieties was developed, which involves Selectfluor™-mediated oxidative fluorination of N,N-dialkyltryptamines in the presence of Lewis acid. This procedure was applied to an antimigraine drug, rizatriptan, to afford the corresponding 3-fluorooxindole, which is a potential fluorine-containing drug candidate.     

Synthesis of N,N-dialkylaminobenzonitriles and halo-(N,N-dialkyl)benzamidines by reaction of halobenzonitriles with lithium amides

3- and 4-N,N-Dialkylaminobenzonitriles and 4-chloro-(N,N-dialkyl)benzamidines were isolated by reacting 4-chlorobenzonitrile with hindered lithium amides under thermodynamic (0 °C) and kinetic control conditions (−78 °C), respectively. As previously reported, a benzyne mechanism seems to be confirmed since N,N-dialkylaminobenzonitriles are formed. Only benzamidines were isolated in fair to high yields at both 0 °C and −78 °C with non-hindered lithium amides. Exploitation and mechanistic rationale of the reaction of different halobenzonitriles are also reported.     

Synthesis of 1H-pyrrolo[3,2-c]quinoline derivatives via palladium-catalyzed heteroannulation of 2-aryl-3-iodo-4-(phenylamino)quinolines and 4-(N,N-allylphenylamino)-2-aryl-3-iodoquinolines

Palladium(0)/copper iodide catalyzed Sonogashira cross-coupling of 2-aryl-3-iodo-4-(phenylamino)quinolines with terminal alkynes afforded series of 1,2,4-trisubstituted 1H-pyrrolo[3,2-c]quinolines in a single-step operation. Conversely, the 4-(N,N-allylphenylamino)-2-aryl-3-iodoquinoline derivatives were found to undergo PdCl₂(PPh₃)₂/CuI catalyzed intramolecular Heck reaction to yield the corresponding 1,3,4-trisubstituted 1H-pyrrolo[3,2-c]quinolines.     

A facile synthesis of 2-[1-(dialkylamino)alkyl]-4H-3,1-benzoxazin-4-ones by the reaction of 1,1-dimethylethyl 2-isocyanobenzoates with N,N-dialkyliminium iodides

A convenient synthetic approach to 2-[1-(dialkylamino)alkyl]-4H-3,1-benzoxazin-4-ones has been developed. Thus, 1,1-dimethylethyl 2-isocyanobenzoates, which can be readily prepared from 2-nitrobenzoic acids by a simple four-step sequence, react with N,N-dialkyliminium iodides without using any catalysts under mild conditions to give the desired products in generally fair-to-good yields.