Nanocomposite membranes containing positively polarized gold nanoparticles for facilitated olefin transport

Positively polarized gold nanoparticles have been demonstrated for use as stable olefin carriers for facilitated olefin transport membranes. The formation and size of gold nanoparticles stabilized by 4-dimethylaminopyridine (DMAP) were monitored using X-ray diffraction (XRD), transmission electron microscopy (TEM) and UV–visible spectroscopy. Nanocomposite membranes that deliver high separation performance for olefin/paraffin mixtures were prepared by dispersing gold nanoparticles stabilized by DMAP in a polymer matrix, poly(vinyl pyrrolidone) (PVP). X-ray photoelectron spectroscopy (XPS) and zeta potential measurements revealed that gold nanoparticles stabilized by DMAP exhibited a high positive polarity, which is responsible for the reversible interaction between the gold nanoparticles and olefin molecules. Compared to neat PVP membranes, the composite membranes consisting of PVP and the polarized gold nanoparticles showed stable and enhanced separation of olefin/paraffin mixtures.     

An ab initio study of ionic liquid silver complexes as carriers in facilitated olefin transport membranes

Liquid phase isoprene/n-pentane mixtures can be separated through the use of facilitated transport membranes containing complexes of silver ions with an ionic liquid (IL). 1-Butyl-3-methyl imidazolium tetrafluoroborate and zwitterion-type imidazolium compounds containing covalently-bound sulfonate groups form complexes with AgX (X = BF₄, NO₃, and ClO₄). Facilitated isoprene transport has been observed with selectivities that depend on the counteranion of the silver salt. The facilitated transport phenomena of the olefin and IL/silver complexes were investigated theoretically by calculating their complexation energies (i.e., the energy of formation of the silver complexes with the olefin) with the density functional theory method. Among polymer/silver salt systems, the polymer/AgBF₄ system has been found to be generally more favorable for facilitated olefin transport than the polymer/AgNO₃ system because of the low lattice energy of AgBF₄. However, there is a different trend for IL/AgX systems. This difference may arise because the positively charged components of the IL can interact with the anions of the silver salt, which changes the olefin complexation activity. For IL/AgX systems, the selectivity varies inversely with the complexation energy, which implies that the diffusion of the carrier may be the significant factor affecting isoprene/n-pentane separation, once the appropriate complexation has occurred between olefin molecules and the ILsilver complexes.     

Facilitated transport mechanism in fixed site carrier membranes

Facilitated transport of gases, such as O₂, has been observed for fixed site carrier membranes. Carrier-impregnated ion-exchange membranes have also been used to produce facilitated transport of CO₂, H₂S and olefins when the carriers are not completely mobile. The actual mechanism for this facilitated transport has not been determined previously. The facilitated transport is provided by the exchange of solute between the free solute region and the bound complexing agent combined with gradients in the free solute and complexed carrier. The ratio of mobility for exchange between the regions is the dimensionless equilibrium constant of the reversible reaction. An expression is also derived for the relationship between the effective diffusion coefficient of the complex in facilitated transport, D_AB, and the diffusion coefficients for exchange between free and complexed solute, D_DH and D_HD. Since D_AB can be determined from experimental results, D_DH and D_HD can be calculated. The results also show the morphology dependence of D_AB. The diffusion coefficient of the free solute D_A also changes with the loading of the complexing agent in the film. This morphology dependence can explain why the gas permeability can decrease when the concentration of the complexing agent increases in the membrane.     

Estimation of penetrant transport properties through fixed site carrier membranes using the RC circuit model and sensitivity analysis

Gas permeability through fixed site carrier membranes (FSCMs) is predicted by the RC circuit models. If only one permeability value is available, other permeability values can readily be estimated as a function of applied pressure for a FSCM with given backward reaction rate and reaction equilibrium constants between carrier and penetrant, carrier concentration, and matrix permeability. The results were compared with experimental oxygen permeabilities through a PMMA membrane containing metallophorphyrin. The agreement between them was exceptional. In addition, the backward reaction rate constant between carrier and penetrant and the pressure fluctuation are found to be most sensitive in determining permeability in FSCMs according to the sensitivity analysis.     

Effect of carrier concentration on the facilitated oxygen transport in a polymer membrane

Facilitated transport of oxygen in a solid Polymer membrane containing cobaltporphyrin (CoP) which carries oxygen specifically and reversibly, leads to permselectivity of oxygen against nitrogen in the membrane. The increase in concentration of the CoP carrier is expected to enhance the oxygen transport. The membranes of poly(octylmethacrylate-co-vinylimidazole) containing 0.8 ～ 10 wt% CoP were prepared, and the effects of the CoP-concentration on the transport and the diffusion constants of oxygen are studied. Although the induction period before the steady state of oxygen permeation was prolonged with the CoP concentration in the polymer membrane, the glass transition temperature (T_g) of the membrane was increased and the diffusion constants of oxygen were decreased with the CoP concentration to yield unexpected reduction of the oxygen permeation in the highly CoP loaded membrane.     

Mass transfer determining parameter in facilitated transport through di-(2-ethylhexyl) dithiophosphoric acid activated composite membranes

Activated composite membranes (ACMs) containing di-(2-ethylhexyl) dithiophosphoric acid (D2EHDTPA) as a carrier have been found to facilitate the transport and separation of several cations. This paper describes an approach to the chemical characterisation of the transport phenomena of Zn²⁺, Cd²⁺, Cu²⁺, Ni²⁺, Sn²⁺ and In³⁺ by an ACM. The selectivity of D2EHDTPA based ACM towards different metal ions is presented and discussed focusing in Zn²⁺ and Cd²⁺ transport and recovery. Selectivity demonstrates that zinc ions are removable from mixtures due to the different extraction strength of D2EHDTPA. Such selectivity is based on the differences of the dynamic behaviour of the metal ions transport. In addition, a correlation of the chemical behaviour of those ACM systems with the corresponding solvent extraction systems has been found.     

Carbon dioxide separation from hydrogen and nitrogen by fixed facilitated transport in swollen chitosan membranes

The separation of carbon dioxide from hydrogen and nitrogen at high temperatures would be valuable to fuel cell, flue gas purification, and ammonia processes. A feed gas mixture of carbon dioxide, hydrogen and nitrogen (10% CO₂, 10% H₂, and 80% N₂) was used to evaluate water-swollen chitosan as a facilitated transport membrane for these applications. The amino group of the chitosan repeating unit could be the fixed carrier that facilitates carbon dioxide transport in the presence of water.     

CO2/H2 separation by facilitated transport membranes immobilized with aqueous single and mixed amine solutions: Experimental and modeling study

An experimental and theoretical analysis to separate CO₂ using facilitated transport membranes immobilized with different aqueous single and mixed amine solutions have been performed. The membranes containing monoethanolamine (MEA), diethanolamine (DEA), monoprotonated ethylenediamine (EDAH⁺) and piperazine (PZ), as well as aqueous blends of PZ with MEA, DEA or EDAH⁺ were considered. The aqueous solution of PZ showed the highest CO₂ permeation rate with respect to other single amine solutions. Therefore blends of PZ with MEA, DEA and EDAH⁺ increased the permeance of carbon dioxide through mixed amine membranes.     

Facilitated transport of molecular oxygen in cobaltporphyrin/poly(1-trimethylsilyl-1-propyne) membrane

The combination membrane of poly(1-trimethylsilyl-1-propyne) with enormously high permeability and poly(vinylimidazole)-bound porphinatocobalt with selective oxygenbinding ability was prepared. Oxygen transport through the membrane was facilitated in terms of oxygen transport via the latter domain as a fixed oxygen-carrier, and this oxygen permeability maintained for a month.     

Simulations of gas transport in membranes based on polynorbornenes functionalized with substituted imide side groups

This paper studies the diffusive and sorption steps of several gases across membranes cast from poly(N-phenyl-exo,endo-norbornene-5,6-dicarboximide) chloroform solutions. Chains packing effects on gas transport was investigated by conducting a parallel study on the permeation characteristics of membranes cast from hydrogenated poly(N-phenyl-exo,endo-norbornene-5,6-dicarboximide) chloroform solutions. The permeability coefficients of several gases in the two membranes were measured finding that hydrogenation of the norbornene moieties decreases gas permeability. The transition states approach was used to determine the trajectories of the gases in the two types of membranes from which the diffusion coefficients were obtained. Monte Carlo techniques based on the Widom method were used to simulate gas sorption process as a function of pressure. The values of the solubility coefficients thus obtained undergo a relatively sharp drop at low pressures approaching to a constant value as pressure increases. With the exception of carbon dioxide, pretty good agreement between the experimental and simulated values of the permeability coefficient is found for the gases studied.     

Impact of structure and morphology on charge transport in semiconducting oligomeric thin-film devices.

We investigated various thin-film morphologies of vacuum-deposited highly luminescent 2,5-di-n-octyloxy-1,4-bis[4'-(styryl)styryl]benzene (Ooct-OPV5) in a typical light-emitting-diode device structure. Important modifications in the thin-film morphology and structure were obtained by changing the substrate temperature in the range 23-90 degrees C. Structural analysis by X-ray and electron diffraction provided clear evidence for polymorphism in evaporated thin films of Ooct-OPV5. Concomitantly, the hole mobility in the corresponding devices was determined by transient electroluminescence measurements. We demonstrate that the substrate temperature T(sub) is a key parameter that controls the hole mobility of the devices. Increasing T(sub) between 23 and 84 degrees C results in a progressive increase of the zero-field hole mobility from 10(-6) to 10(-4) cm(2) V(-1) s(-1). The increase in hole mobility is correlated to the average grain size in the thin films. In addition, we give evidence for the existence of a peculiar growth mode in the bulk crystal structure of Ooct-OPV5, whereby the (a,b) and (b,c) planes can grow in a homoepitaxial manner.     

The study of ion transport parameters associated with dissociated cation using EIS model in solid polymer electrolytes (SPEs) based on PVA host polymer: XRD,FTIR, and dielectric properties

Electrical impedance spectroscopy (EIS) model is used to determine ion transport parameters. The transport parameters such as mobility, carrier density and diffusion coefficient of ions are the subject of great interest. The solution cast method is used to fabricate SPEs using polyvinyl alcohol (PVA) loaded with different amounts of sodium iodide (NaI). XRD deconvolution is used to separate the crystalline phase from amorphous phase. The degree of crystallinity is reduced with an increased amount of NaI. FTIR is used to investigate the polymer/salt interactions. To find out the circuit element, the Nyquist plots of impedance results are fitted with EEC modeling. The bulk resistance obtained from the EEC modeling is used to determine DC conductivity. At room temperature the maximum conductivity of $2.41\times {10}^{-4}\mathrm{S}/\mathrm{c}\mathrm{m}$ is measured. The regions belong to the electrode polarization (EP) effect are distinguished form the spectra of dielectric constant and dielectric loss. Due to the buildup of charge carriers, the dielectric constant and loss are observed to be high at the low-frequency region. Obvious peaks are appeared in the tanδ and M“ spectra at high salt concentrations. Shifting of the tanδ peaks to the high frequency region are detected. The incomplete circular arc of the argand plot is shown the non-Debye relaxation. It is found that with increasing frequency, AC conductivity increased. The regions belong to the EP and DC contributions are differentiated in the AC spectra.     

Effect of ultraviolet light irradiation on gas permeability in polyimide membranes. 1. Irradiation with low pressure mercury lamp on photosensitive and nonphotosensitive membranes

Two types of polyimide membranes; one crosslinkable and the other noncrosslinkable using ultraviolet light irradiation (UV irradiation), were prepared and investigated concerning the effect of UV irradiation on their gas permeabilities and selectivities. Permeability and diffusion coefficients for O₂, N₂, H₂, and CO₂ were determined using the vacuum pressure and time lag method. Sorption properties for carbon dioxide were carried out to evaluate the changes in the free volume in the membranes due to the irradiation. In both membranes, permeability coefficients for all gases used in this study decreased and permselectivity, particularly for H₂ over N₂, increased with increasing UV irradiation time without a significant decrease in the flux of H₂. The coefficients depended on the membrane thickness, suggesting asymmetrical changes in both membranes due to UV irradiation. It was suggested by an attenuated total reflection (ATR) FTIR method and analysis of the gas sorption properties of the membranes that the physical changes due to UV irradiation at the irradiated side in both membranes significantly affected their gas permeation properties compared with the chemical changes, especially the crosslinking in the crosslinkable type. © 1997 John Wiley & Sons, Inc. J. Polym Sci B: Polym Phys 35: 2259–2269, 1997     

Analysis of Single Nucleotide Polymorphism in Human Paraoxonase 1 Gene（Q192R） with Matrix-assisted Laser Desorption/Ionization Time-of-flight Mass Spectrometry

Introduction Singlenucleotidepolymorphisms(SNPs)arethe mostabundantDNAmarkersinthehumangenomeoc curringatafrequencyofoneinevery500—1000nu cleotides[1].Avarietyofmethodshavebeenusedfor theanalysisofsinglenucleotidepolymorphisms,inclu dingrestrictionfragme…     

Mixed-ligand complexes of zinc(II), cobalt(II) and cadmium(II) with sulfur, nitrogen and oxygen ligands. Analysis of the solid state structure and solution behavior. Implications for metal ion substitution in alcohol dehydrogenase

In this paper we characterize new, mixed ligand complexes of zinc(II), cobalt(II) and cadmium(II) with tri-tert-butoxysilanethiolate and 2-(2′-hydroxyethyl)pyridine ligands. Due to the chelating versus non-chelating behavior of 2-(2′-hydroxyethyl)pyridine ligand we have obtained an interesting structural variety in the studied system. The presented coordination patterns together with the results of NMR studies have been used to illustrate a rapid chemical exchange undergoing in methanolic solutions of zinc(II) and cadmium(II) complexes. UV-Vis spectra of cobalt(II) species have also evidenced an exchange in the case of cobalt(II) complex. The relative strength of hydrogen bond formed by hydroxyl group bonded to Zn(II), Co(II) or Cd(II) was evaluated by analysis of structural parameters and position of the OH stretching vibrations in the FT-IR spectra of the complexes in solid state. The data were compared with the activity of zinc (native) alcohol dehydrogenase and alcohol dehydrogenase substituted with cobalt and cadmium ions. The enthalpies of proton abstraction in zinc and cobalt complexes were calculated and found to be very similar. The attempt to apply zinc tri-tert-butoxysilanethiolate as a catalyst in the biomimetic reaction of reduction of N-benzylnicotinamide chloride by ethanol was unsuccessful.     

Thermodynamics of mixtures with strongly negative deviations from Raoult’s law: Part 5. Excess molar volumes at 298.15 K for 1-alkanols+dipropylamine systems: characterization in terms of the ERAS model

Excess molar volumes, V_m^E, at 298.15 K and atmospheric pressure over the entire composition range for binary mixtures of methanol, ethanol, 1-propanol, 1-butanol, 1-pentanol, 1-hexanol, 1-heptanol and 1-octanol with dipropylamine are reported from densities measured with a vibrating-tube densimeter. All the excess volumes are large and negative over the whole mole fraction range, indicating strong interactions between unlike molecules, which are more important for the system involving methanol, characterized by the most negative V_m^E. For the remainder mixtures, V_m^E at equimolar composition, is approximately constant. The V_m^E curves are nearly symmetrical.

V_m^E and excess molar enthalpies, H_m^E, of the mixtures studied are consistently described by the ERAS model. The ERAS parameters confirm that the strongest interactions between unlike molecules are encountered in the methanol+dipropylamine system.     

Silver Compounds in Synthetic Chemistry. 1 A Facile Preparative Route for Pentafluorophenylsilver,AgC6F5 and its Use as an Oxidative Pentafluorophenyl Group Transfer Reagent in Reactions with Group 12 to 16 Elements — the Single Crystal Structure of AgC6F5 · EtCN,the First Arylsilver Derivative Crystallising in Infinite Chains

AgC₆F₅ is directly and quantitatively formed from room temperature reactions of AgF and Me₃SiC₆F₅ in N‐donor solvents, particularly EtCN. Solutions of AgC₆F₅ prepared by this method exhibit excellent oxidative properties in reactions with a variety of groups 12 to 16 elements giving the corresponding pentafluorophenyl element compounds in moderate to excellent yields. AgC₆F₅·EtCN crystallises with monoclinic symmetry (C2/c, Z = 8, a = 2301.4(5) pm, b = 1078.8(4) pm, c = 948.0(2) pm, β = 113.19(1)°) and exhibits chains of silver atoms with bridging C₆F₅ groups.