Studying astrophysical collisionless shocks with counterstreaming plasmas from high power lasers

Collisions of high Mach number flows occur frequently in astrophysics, and the resulting shock waves are responsible for the properties of many astrophysical phenomena, such as supernova remnants, Gamma Ray Bursts and jets from Active Galactic Nuclei. Because of the low density of astrophysical plasmas, the mean free path due to Coulomb collisions is typically very large. Therefore, most shock waves in astrophysics are “collisionless”, since they form due to plasma instabilities and self-generated magnetic fields. Laboratory experiments at the laser facilities can achieve the conditions necessary for the formation of collisionless shocks, and will provide a unique avenue for studying the nonlinear physics of collisionless shock waves. We are performing a series of experiments at the Omega and Omega-EP lasers, in Rochester, NY, with the goal of generating collisionless shock conditions by the collision of two high-speed plasma flows resulting from laser ablation of solid targets using ∼10¹⁶ W/cm² laser irradiation. The experiments will aim to answer several questions of relevance to collisionless shock physics: the importance of the electromagnetic filamentation (Weibel) instabilities in shock formation, the self-generation of magnetic fields in shocks, the influence of external magnetic fields on shock formation, and the signatures of particle acceleration in shocks. Our first experiments using Thomson scattering diagnostics studied the plasma state from a single foil and from double foils whose flows collide “head-on”. Our data showed that the flow velocity and electron density were 10⁸ cm/s and 10¹⁹ cm⁻³, respectively, where the Coulomb mean free path is much larger than the size of the interaction region. Simulations of our experimental conditions show that weak Weibel mediated current filamentation and magnetic field generation were likely starting to occur. This paper presents the results from these first Omega experiments.     

Atomic physics of relativistic high contrast laser-produced plasmas in experiments on Leopard laser facility at UNR

The results of the recent experiments focused on study of x-ray radiation from multicharged plasmas irradiated by relativistic (I > 10¹⁹ W/cm²) sub-ps laser pulses on Leopard laser facility at NTF/UNR are presented. These shots were done under different experimental conditions related to laser pulse and contrast. In particular, the duration of the laser pulse was 350 fs or 0.8 ns and the contrast was varied from high (10^?7) to moderate (10^?5). The thin laser targets (from 4 to 750 μm) made of a broad range of materials (from Teflon to iron and molybden to tungsten and gold) were utilized. Using the x-ray diagnostics including the high-precision spectrometer with resolution R ～ 3000 and a survey spectrometer, we have observed unique spectral features that are illustrated in this paper. Specifically, the observed L-shell spectra for Fe targets subject to high intensity lasers (～10¹⁹ W/cm²) indicate electron beams, while at lower intensities (～10¹⁶ W/cm²) or for Cu targets there is much less evidence for an electron beam. In addition, K-shell Mg features with dielectronic satellites from high-Rydberg states, and the new K-shell F features with dielectronic satellites including exotic transitions from hollow ions are highlighted.     

Accelerating piston action and plasma heating in high-energy density laser plasma interactions

In the field of high-energy density physics (HEDP), lasers in both the nanosecond and picosecond regimes can drive conditions in the laboratory relevant to a broad range of astrophysical phenomena, including gamma-ray burst afterglows and supernova remnants. In the short-pulse regime, the strong light pressure (>Gbar) associated ultraintense lasers of intensity I > 10¹⁸ W/cm² plays a central role in many HEDP applications. Yet, the behavior of this nonlinear pressure mechanism is not well-understood at late time in the laser–plasma interaction. In this paper, a more realistic treatment of the laser pressure ‘hole boring’ process is developed through analytical modeling and particle-in-cell simulations. A simple Liouville code capturing the phase space evolution of ponderomotively-driven ions is employed to distill effects related to plasma heating and ion bulk acceleration. Taking into account these effects, our results show that the evolution of the laser-target system encompasses ponderomotive expansion, equipartition, and quasi-isothermal expansion epochs. These results have implications for light piston-driven ion acceleration scenarios, and astrophysical applications where the efficiencies of converting incident Poynting flux into bulk plasma flow and plasma heat are key unknown parameters.     

Hot electron production using the Texas Petawatt Laser irradiating thick gold targets

We present data for relativistic hot electron production by the Texas Petawatt Laser irradiating solid Au targets with thickness between 1 and 4 mm. The experiment was performed at the short focus target chamber TC1 in July 2011, with intensities on the order of several ×10¹⁹ W/cm² and laser energies around 50 J. We discuss the design of an electron-positron magnetic spectrometer to record the lepton energy spectra ejected from the Au targets and present a deconvolution algorithm to extract the lepton energy spectra. We measured hot electron spectra out to ～50 MeV, which show a narrow peak around 10–20 MeV, plus high energy exponential tail. The hot electron spectral shapes appear significantly different from those reported for other PW lasers.     

Measurement and simulations of hollow atom X-ray spectra of solid-density relativistic plasma created by high-contrast PW optical laser pulses

K-shell spectra of solid Al excited by petawatt picosecond laser pulses have been investigated at the Vulcan PW facility. Laser pulses of ultrahigh contrast with an energy of 160 J on the target allow studies of interactions between the laser field and solid state matter at 10²⁰ W/cm². Intense X-ray emission of KK hollow atoms (atoms without n = 1 electrons) from thin aluminum foils is observed from optical laser plasma for the first time. Specifically for 1.5 μm thin foil targets the hollow atom yield dominates the resonance line emission. It is suggested that the hollow atoms are predominantly excited by the impact of X-ray photons generated by radiation friction to fast electron currents in solid-density plasma due to Thomson scattering and bremsstrahlung in the transverse plasma fields. Numerical simulations of Al hollow atom spectra using the ATOMIC code confirm that the impact of keV photons dominates the atom ionization. Our estimates demonstrate that solid-density plasma generated by relativistic optical laser pulses provide the source of a polychromatic keV range X-ray field of 10¹⁸ W/cm² intensity, and allows the study of excited matter in the radiation-dominated regime. High-resolution X-ray spectroscopy of hollow atom radiation is found to be a powerful tool to study the properties of high-energy density plasma created by intense X-ray radiation.     

Plasma emission spectroscopy of solids irradiated by intense XUV pulses from a free electron laser

The FLASH XUV-free electron laser has been used to irradiate solid samples at intensities of the order 10¹⁶ W cm^?2 at a wavelength of 13.5 nm. The subsequent time integrated XUV emission was observed with a grating spectrometer. The electron temperature inferred from plasma line ratios was in the range 5–8 eV with electron density in the range 10²¹–10²² cm^?3. These results are consistent with the saturation of absorption through bleaching of the L-edge by intense photo-absorption reported in an earlier publication.     

Gamma-ray and pair creation using ultra-intense lasers and astrophysical applications

Ultra-intense laser irradiating high-Z solid targets has become a new, powerful and efficient tool to create electron–positron pairs and intense gamma-ray beams. This paper reviews the recent developments in this field, both in theory and experiments. We will also discuss potential astrophysical applications of such laboratory experiments using ultra-intense lasers.     

Intense ultrashort laser–Xe cluster interaction

The last several years have witnessed a surge of activity involving the interaction of clusters with intense ultrashort pulse lasers. The interest in laser–cluster interaction has not been only of academic interest, but also because of the wide variety of potential applications. Clusters can be used as a compact source of X-rays, incoherent as well as coherent, and of fast ions capable of driving a fusion reaction in deuterium plasmas. In one set of xenon cluster experiments, in particular, amplification of ～2.8 Å X-rays has been observed [28]. X-ray amplification in cluster media is a phenomenon of critical importance and may lead to applications such as EUV lithography, EUV and X-ray microscopy, X-ray tomography, and variety of applications in biology and material sciences. However, while amplification of ～2.8 Å X-rays has been documented in experiments, the mechanism for producing it remains to be fully understood. In this talk, a xenon model of laser–cluster interaction dynamics is presented to shed light on the processes responsible for amplification. The focus of this research is on the feasibility of creating population inversions and gain in some of the inner-shell hole state transitions within the M-shell of highly ionized xenon. The model couples a molecular dynamics (MD) treatment of the explosively-driven, non-Maxwellian cluster expansion to a comprehensive multiphoton-radiative ionization dynamic (ID) model including single- and double-hole state production within the Co- and Fe-like ionization stages of xenon. The hole-state dynamics is self-consistently coupled to a detailed valence-state collisional-radiative dynamics of the Ni-, Co-, and Fe-like ionization stages of xenon. In addition, the model includes tunneling ionization rates that confirm an initial condition assumption that Ni-like ground states can be created almost instantaneously, on the order of a femtosecond or less, i.e., at laser intensities larger than 10¹⁹ W/cm², all of the N-shell, n = 4 electrons are striped from a xenon atom in less than a femtosecond. Because of the abundance of these ground states, large numbers of n = 2, inner-shell hole states and large population inversions can be created when the Ni-like ground states are photo- or collisionally ionized. Once the M-shell is entered, tunneling ionization slows down as does collisional ionization due to the fall in ion density as the cluster expands. Moreover, as the cluster density goes down, our combined MD and ID calculations show that so do the calculated population inversions. Thus, our calculations do not support the initial experimental data interpretations in which the measured gains have been associated with double holes in more highly ionized stages of xenon (Xe³²⁺, Xe³⁴⁺, Xe³⁵⁺, and Xe³⁷⁺), which our calculations suggest would require laser intensities in excess of 1.5 × 10²⁰ W/cm², for a 248 nm, ～250 fs laser pulse focused in a gas of xenon clusters. At laser intensities used in the experiment, such ionization stages would be reached, but only later in time when cluster densities have fallen by several orders of magnitude from their initial values to values where pumping rates are too low and gains cannot be generated.     

High-resolution 22–52 keV backlighter sources and application to X-ray radiography

The requirement for sources of hard X-rays suitable for high resolution radiography through large ρR targets is prominent in many aspects of current laser-driven plasma physics research. In recent work using the OMEGA EP laser facility [L. J. Waxer, M. J. Guardalben, J. H. Kelly et al., CLEO/QELS, Optical Society of America, San Jose, CA, IEEE (2008)] at the Laboratory for Laser Energetics (LLE) in Rochester, NY, experiments have been performed to measure characteristics of 22–52 keV X-ray sources using high intensity short-pulse lasers. High quality point projection, two-dimensional radiography was demonstrated by irradiating microwire targets with laser intensities of 10¹⁶ W cm^?2–10¹⁹ W cm^?2. Microwire targets were manufactured to dimensions of 10 μm × 10 μm × 300 μm and were supported by a 100 μm × 300 μm × 6 μm low-Z substrate. Measurements of the k–α conversion efficiency and X-ray source-size are discussed and, of particular importance for radiography, the spectral purity of the backlighter is characterized to assess the relative importance of the Kα emission to bremsstrahlung background.     

Application of laser-induced thermal acoustics in air to measurement of shock-induced temperature changes

The laser-induced thermal acoustics (LITA) method was used to measure the temperature profiles induced behind spherical shock waves, generated by high-voltage discharge in air with an energy of 6 J. A Nd:YAG laser (wavelength 532 nm, energy 300 mJ, pulse duration 10 ns, line width 0.005 cm⁻¹) and an Ar-ion laser (wavelength 488 nm, power 4 W) served as the pump and probe lasers, respectively for the LITA measurements. The peak temperatures were in good agreement with results calculated with the Euler equations. The temperature profiles behind the shock, however, differed in decay rates. The peak temperatures behind the shock wave were determined by reflected overpressure and agreed with those from the LITA measurements within a maximum error of 5%.     

Electron–positron pair creation in burning thermonuclear plasmas

Estimates are provided of the formation of electron–positron pairs from γ–γ annihilation in a plasma under conditions of thermonuclear burn in inertial confinement fusion (ICF). Based on values of density, temperature and plasma size that are representative of both burning DT and D plasmas in current and potential future ICF schemes, we estimate the radiation field present and from that calculate the electron–positron generation. In the most extreme conditions considered here, positron number densities of over 10²³ cm^?3 are predicted.     

MeV proton generation and efficiency from an intense laser irradiated foil

The proton energy distribution generated from the interaction of an intense (Iλ² ≈ 10²⁰ W/cm² μm²) short-pulse (100 fs) laser with a thin foil is investigated using energy resolved measurements and 2D collisional PIC-hybrid simulations. The measured absolute proton spectrum is well matched by a 1.7 MeV exponential function for energies <11 MeV. The proton conversion efficiency from hot electrons ≈6%. Simulations predict a strong radial dependence on the maximum proton energy and on the radial extent of 12 Å hydrocarbon depletion region. C and O ions in the hydrocarbon layer gain significant energies, limiting the efficiency to the protons. The efficiency scaling for ion mixtures is derived using a simple model, and is shown to strongly depend on the cooling rate of the hot electrons. Simulations using hydrogen-rich, layered targets predict much higher efficiencies.     

Isochoric heating of reduced mass targets by ultra-intense laser produced relativistic electrons

We present measurements of the chlorine K-alpha emission from reduced mass targets, irradiated with ultra-high intensity laser pulses. Chlorinated plastic targets with diameters down to 50 μm and mass of a few 10^?8 g were irradiated with up to 7 J of laser energy focused to intensities of several 10¹⁹ W/cm². The conversion of laser energy to K-alpha radiation is measured, and high-resolution spectra that allow observation of line shifts are observed, indicating isochoric heating of the target up to 18 eV. A zero-dimensional 2-temperature equilibration model, combined with electron impact K-shell ionization and post processed spectra from collisional radiative calculations reproduces the observed K-alpha yields and line shifts, and shows the importance of target expansion due to the hot electron pressure.     

Development of X-ray Thomson scattering for implosion target characterization

X-ray Thomson scattering from spherically imploding, direct-drive capsules is used to study the in-flight density, temperature, and ionization state at electron densities of up to ∼10²⁴ cm⁻³. We present scattering data from Be cone-in-shell targets with ∼2 × 10⁶ photons in the scattered spectrum. These measurements display the ability for single-shot characterization of the shell conditions in capsule implosions. This is important for diagnosing inertial confinement fusion experiments that determine the likelihood of ignition at the National Ignition Facility (NIF), LLNL. We will discuss the experimental geometry, or platform, and the outlook for further improvement of the signal-to-noise.     

Plasma jets produced by low energy laser pulse interaction with planar and cratered targets

Laser experiments of the plasma jet formation using nanosecond laser pulses with low energy, i.e., <20 J, are presented. Planar and cratered gadolinium and aluminum targets are irradiated with laser intensities of several 10¹⁴ W/cm². Spatially-resolved time-integrated X-ray spectra were recorded in the spectral range from 7 to 10 Å. A jet-like structure is obtained from aluminum targets with a preformed crater, which is not seen in planar target irradiation. For gadolinium, a jet is observed from both planar and preformed cratered targets, suggesting that the collimation is dominated by radiative cooling. A radiation-hydrodynamics code coupled to a non-LTE ionization code was used to model the plasma. The calculated plasma emission was found to be consistent with the experimental results.     

Kinetic simulations of the heating of solid density plasma by femtosecond laser pulses

Experiments have been performed in which fs-timescale laser pulses, focused to an intensity ～10¹⁶ W cm^?2, are able to directly create and interact with solid density plasma (1). We have performed one-dimensional simulations of the experiments with a kinetic model which solves Maxwell's equations coupled to the Fokker–Planck equation enabling us to self-consistently model the non-local heat flow and absorption process. We find that the heat-flux is magnetized by the laser field and is inhibited relative to the Spitzer value.     

Early-time evolution of a radiative shock

We have performed high-energy-density physics experiments with large radiative fluxes, relevant to radiative shocks in our universe. These experiments were performed at the Omega Laser facility and used a laser irradiance of 7.2 × 10¹⁴ W cm^?2 to launch a Be disk into low-density Xe gas. The radiative shocks were observed early in time as the dense shocked Xe layer began to form. The average shock position indicates that the shock is moving over 130 km s^?1. Data are compared to simulation output from the CRASH code, which was developed at the Center for Radiative Shock Hydrodynamics at the University of Michigan.     

CFD simulation of a gas–solid fluidized bed with two vertical jets

A computational fluid dynamics (CFD) model is used to investigate the hydrodynamics of a gas–solid fluidized bed with two vertical jets. Sand particles with a density of 2660 kg/m³ and a diameter of 5.0 × 10^?4 m are employed as the solid phase. Numerical computation is carried out in a 0.57 m × 1.00 m two-dimensional bed using a commercial CFD code, CFX 4.4, together with user-defined Fortran subroutines. The applicability of the CFD model is validated by predicting the bed pressure drop in a bubbling fluidized bed, and the jet detachment time and equivalent bubble diameter in a fluidized bed with a single jet. Subsequently, the model is used to explore the hydrodynamics of two vertical jets in a fluidized bed. The computational results reveal three flow patterns, isolated, merged and transitional jets, depending on the nozzle separation distance and jet gas velocity and influencing significantly the solid circulation pattern. The jet penetration depth is found to increase with increasing jet gas velocity, and can be predicted reasonably well by the correlations of Hong et al. (2003) for isolated jets and of Yang and Keairns (1979) for interacting jets.     

Dynamics of heavy particles in two swirling jets

We report flow visualisations and laser Doppler anemometry (LDA) velocity measurements in the near field of two swirling jets. The Reynolds number based on jet diameter and bulk velocity at the nozzle exit is 1.4 × 10⁵. In the first jet, a small recirculation region is formed around the jet axis, while, in the second, the streamwise velocity remains positive and overshoots near the jet centre. In both cases, flow visualisations show that the vortex core of the jets is depleted of seeding particles. By using time-averaged distributions of the streamwise and tangential velocities measured at the nozzle outlet, the dynamics of the particles is simulated, by integrating their simplified equations of motion. The particles trajectory thus computed agrees well with that observed in the flow visualisations. Although the turbulence intensity is substantially different in the core of the two jets, its effect on the seeding concentration is localised near the edge of the core.     

The production and evolution of multiple converging radiative shock waves in gas-filled cylindrical liner z-pinch experiments

A cylindrical liner z-pinch configuration has been used to drive converging radiative shock waves into different gases. On application of a 1.4 MA, 240 ns rise-time current pulse, a series of cylindrical shocks moving at typical velocities of 20 km s^?1 are consecutively launched from the inside liner wall into an initially static gas-fill of density ～10^?5 g cm^?3. The drive current skin depth calculated prior to resistive heating was slightly less than the liner wall thickness and no bulk liner implosion occurred. Axial laser probing images show the shock fronts to be smooth and azimuthally symmetric, with instabilities developing downstream of each shock. Evidence for a radiative precursor ahead of the first shock was seen in laser interferometry imaging and time-gated, spatially resolved optical spectroscopy. The interferometry diagnostic was able to simultaneously resolve the radiative precursor and the density jumps at the shock fronts. Optical streak photography provided information on shock timing and shock trajectories and was used to gain insight into the shock launching mechanisms.