Zr1-xMxWMoO8-x/2和Zr1-xMxW2O8-x/2固溶体的晶胞参数与晶格畸变的关系

合成了Zr1-xMxWMoO8-x/2(M=Er,Tm,Yb,Sc,In,Ga,Al)和Zr1-xMxW2O8-x/2(M=Eu,Er,Yb,Sc,In,Ga,Al)2个系列的固溶体,前者具有β-ZrW2O8结构类型(简称β相);后者具有α-ZrW2O8结构类型(简称α相)。建立了相和相的晶胞参数与M3+离子浓度的Vegard方程,测定了上述固溶体的固溶度。讨论了M3+离子的化学性质与Vegard斜率SV的关系。分析了α相的SαA与β相的SβA的关系;揭示了α-Zr1-xMxW2O8-x/2晶格中2[WO4]四面体对的取向有序程度对晶格畸变的贡献。提出上述固溶体的晶胞参数随溶质浓度增加而减小,主要是由于氧空位缺陷相互作用的结果。     

Single-crystal growth and structure determination of Ag16I12P2O7

Single crystals of the fast-ion conductor Ag₁₆I₁₂P₂O₇ were prepared and their structure ($\text{P6}\text{mcc}\text{, a = 12.054, c = 7.504}$ Å) was determined by X-ray diffraction (r = 0.08). The I atoms form a close-packed array leaving channels occupied by P₂O^4?₇ ions running along the c axis. The Ag atoms are disordered over four different types of site with occupation numbers ranging from 0.12 to 0.52. Each Ag⁺ ion coordination polyhedron shares several faces with adjacent polyhedra providing ready paths for Ag⁺ ion conduction.     

Sn19.3Cu4.7As22I8: a new clathrate-I compound with transition-metal atoms in the cationic framework

Sn19.3Cu4.7As22I8, a new clathrate-I compound with a cationic host framework containing transition metals, has been synthesized, and its crystal structure has been determined. It crystallizes in the cubic space group Pmn with a unit cell parameter a = 11.1736(3) angstroms and Z = 1 (R = 0.031 for 329 independent reflections and 22 variables). Tin, copper, and arsenic form the cationic clathrate framework hosting the guest iodine anions in cages of two different shapes. Sn19.3Cu4.7As22I8 does not contain vacancies in the framework but reveals three partially occupied positions of the metal atoms, leading to the formation of Sn-Sn and Sn-Cu bonds that differ in length. The 119Sn M?ssbauer spectrum confirms the local environment of tin atoms. The hyperfine constants obtained from the M?ssbauer spectra for different cationic tin clathrates are discussed. Electron diffraction and electron microscopy reveal that the splitting affects the short-range ordering but does not lead to a superstructure. Though containing a transition metal, Sn19.3Cu4.7As22I8 is diamagnetic, and its composition corresponds to the Zintl formalism.     

A niobium phosphate with a tunnel structure: Ca0.5+xCs2Nb6P3O24

A new niobium phosphate, Ca_0.5+xCs₂Nb₆P₃O₂₄ has been isolated. It crystallizes in the R32 space group, with the following parameters of the hexagonal cell: a_H = 13.379 Å, c_H = 10.371 Å. The determination of the structure by a single crystal X-ray diffraction study shows that its host lattice [Nb₆P₃O₂₄]_∞ can be described as the assemblage of mixed chains [Nb₂PO₁₃]_∞ running along c_H in which one PO₄ tetrahedron alternates with two NbO₆ octahedra. This framework delimits huge tunnels where the cesium cations are located and cages formed by [Nb₆P₃O₃₆] units occupied by calcium. The most striking feature of this framework deals with its similarity with the hexagonal tungsten bronze of Magnéli (HTB). The latter is discussed here by considering the stacking along c of [Nb₂PO₈]_∞ layers whose geometry is closely related to that of the HTBs. The possibility of nonstoichiometry leading to a mixed valency of niobium is considered.     

Ce0.5-xZr0.5-xBa2xO2负载TiO2光催化降解气相苯

在密闭不锈钢反应器内研究了Ce0.5-xZr0.5-xBa2xO2负载锐钛型TiO2光催化降解气相苯的性能.确定了该系列光催化剂的最佳Ba含量,并应用X射线衍射、紫外-可见漫反射光谱以及X射线光电子能谱对催化剂进行了表征.结果表明,TiO2在载体表面均匀分散.在210~400 nm范围内,TiO2/Ce0.5-xZr0.5-xBa2xO2比TiO2吸收更多的紫外光.TiO2/Ce0.5-xZr0.5-x-Ba2xO2包含Ti和O两种元素,TiO2/Ce0.5-xZr0.5-xBa2xO2的Ti 2p结合能向低能端偏移.Ce0.5-xZr0.5-xBa2xO2表面负载TiO2能有效提高催化剂的光催化活性.Ce0.5-xZr0.5-xBa2xO2的作用是转移电子和使催化剂在紫外区的吸收增强.     

Bromine NQR study of structure and molecular torsional motion in N4P4Br8 and N3P3Br6

The bromine NQR spectrum of tetrameric bromocyclophosphazene, N₄P₄Br₈, has been studied in the temperature range from 77 to 300 K. The negative temperature coefficients of the resonance frequencies have been analysed using Bayer-Kushida-Brown equations. Torsional modes in the frequency range 10–15 cm^?1 are shown to characterise the observed motional averaging and are only slightly temperature dependent. The multiplicity and relative intensities of resonances in the trimer, N₃P₃Br₆, have been correlated with the known electron density distribution. The results for the bromo-derivatives are compared with those reported for the corresponding chloro-derivatives.     

Metal-rich phosphides RE5Ir19P12 with Sc5Co19P12 type structure

The iridium-rich phosphides RE₅Ir₁₉P₁₂ (RE=Sc, Y, La–Nd, Sm–Lu) with Sc₅Co₁₉P₁₂ type structure, space group P62?m were synthesized by solid state reactions of the elements in tantalum crucibles. Well shaped single crystals were obtained in bismuth fluxes. All phosphides were characterized on the basis of X-ray powder data. The structures of RE₅Ir₁₉P₁₂ with RE=Sc, La, Ce, Dy, Er, Tm, and Yb were refined from single crystal diffractometer data. The complex structure of these phosphides can be described by an intergrowth of simpler ThCr₂Si₂ and SrPtSb related slabs. Striking structural motifs of the RE₅Ir₁₉P₁₂ structures are slightly distorted tricapped trigonal prisms of the metal atoms around the phosphorus atoms. The iridium and phosphorus atoms build up three-dimensional [Ir₁₉P₁₂] polyanionic networks (230–286 pm Ir–P and 282–296 pm Ir–Ir in La₅Ir₁₉P₁₂) which leave cavities of coordination numbers 16 and 15 for the rare earth atoms.     

[Cu2I2(tptz)]n的合成和晶体结构研究

用溶液法以碘化亚铜和tptz反应得到Cu(Ⅰ)的配位聚合物[Cu2I2(tptz)]n(1)(tpzt=2,4,6-tris(pyrazole-1-yl)-1,3,5-s-triazine),对该化合物进行了元素分析,红外光谱,XRD,热重等表征,并测定了它的单晶结构.配位聚合物[Cu2I2(tptz)]n(1)属单斜晶系,C2/c空间群,晶体学数据为:a=1.30683(17)nm,b=1.25425(16)nm,c=1.14732(15)nm,β=94.940(2)°,Z=4.tptz以双联吡啶形的配位方式和Cu(Ⅰ)配位形成一条Z字形的1D链.     

六方类钙钛矿体系La2-xNdxCa2MnO7的结构和相关系

利用柠檬酸盐前驱物法制备了La_2-xNd_xCa₂MnO₇系列样品，并利用Rietveld方法对结构进行了精修。结果表明：体系中存在两个单相区(x ≤ 1.0，x ≥ 1.5)和一个两相区(1.0< x< 1.5)。体系这种结构变化可以用稀土离子半径变化说明。     

SiO2负载氮掺杂TiO2可见光响应光催化剂的制备及性能

以四氯化钛为钛源,尿素为氮源,采用液相水解-沉淀法制得SiO2负载N掺杂TiO2可见光响应TiO2-xNy/SiO2光催化剂(TSN)。以苯酚为模型物,考察了TSN在可见光区、紫外光区及太阳光下的光催化活性,以及催化剂的使用寿命、分离性能。采用XPS、FTIR、UV-Vis DRS、XRD、TEM和低温氮物理吸附等对催化剂的结构进行表征。结果表明,N以阴离子形式进入TiO2体相并置换晶格中的O,适量N掺杂的TSN在紫外光区、可见光区及太阳光下均表现出较高的活性。SiO2与TiO2界面间有Ti-O-Si键形成,结合牢固。N掺杂在TiO2表面生成Ti-O-N键,形成新的能级结构,使催化剂的吸收红移至450~500 nm,诱发TiO2可见光催化活性。SiO2负载可减小TiO2颗粒平均尺寸,增加催化剂比表面积;同时SiO2负载还可改善催化剂的分离性能,提高催化剂使用寿命。     

锂离子电池正极材料LiV3-xAlxO8的水热合成与性能

采用水热法制备了Al掺杂的锂二次电池正极材料LiV3-xAlxO8,并用X射线衍射和扫描电镜对材料的晶体结构和形貌进行了表征.以50 mA·g-1进行恒流充放电测试,结果表明Al掺杂能够明显改善材料的电化学性能.在掺杂改性的LiV3-xAlxO8材料中,LiV2.93Al0.07O8的初始容量最高,达到325 mAh·g-1.当掺杂量为x=0.04时,材料的循环性能最佳.LiV2.96Al0.04O8经20次循环后仍保持179 mAh·g-1的比容量,且充放电效率始终维持在98%左右.     

LiNi1-xMxVO4的红外光谱和拉曼光谱研究

The vanadates of LiNi_1-xM_xVO₄(M=Fe,Co,Ni) containing VO₄ tetrahedrons were synthesized by soft chemical method through a new mild liquid route. The samples sintered at 450℃ for 3h and at 650℃ for 3h are named for LT-LiNiVO₄ and for MT-LiNi_1-xM_xVO₄ respectively. All of the products were measured by X-ray diffraction, IR and Raman spectra respectively. In comparison with IR spectra of V₂O₅ and NiO, the LT-LiNiVO₄ has a strong and broad IR absorption band of VO₄ tetrahedrons located at 600～850cm^-1 with three small splitting peaks corresponding to the asymmetry stretching vibrations of V-O bonds. The results of IR and Raman spectra for MT-LiNi_1-xM_xVO₄ show that the cations of Ni²⁺, Co²⁺, Fe²⁺ have the influences on the frequency shifts of the V-O vibrations.     

Crystal growth and X-ray data of the lead phosphates Pb4P2O9 and Pb8P2O13

Single crystals of the title compounds have been grown by the Czochralski technique. Pb₄P₂O₉ crystallizes in the space group $\text{P2}{}_1\text{c}$ with the parameters a = 9.4812 Å, b = 7.1303 Å, c = 14.390 Å, β = 104.51° and Pb₈P₂O₁₃ in $\text{C2}\text{m}$ with a = 10.641 Å, b = 10.206Å c = 14.342 Å, β = 98.34°.     

La2-xBixCuO4阴极材料的合成与电化学性质

采用甘氨酸-硝酸盐法合成了固体氧化物燃料电池阴极材料La_2-xBi_xCuO₄（x=0、0.05、0.10）,并利用X射线衍射（XRD）对材料的物相进行分析。结果表明,La_2-xBi_xCuO₄形成单一的类钙钛矿结构氧化物,且晶胞体积随着铋掺杂量的增加而增大。在950℃烧结24 h过程中,La_2-xBi_xCuO₄不与电解质Sm_0.2Ce_0.8O_1.9（SDC）发生反应,表明这种电解质材料具有良好的高温化学相容性。电导率测试结果表明Bi的掺入显著提高了材料电导率。程序升温脱附测试结果表明,铋的掺杂显著增强了材料的表面氧吸附能力。不同氧分压下的交流阻抗谱测试结果表明,La_1.9Bi_0.1CuO₄阴极在700℃空气中的极化电阻为0.26 Ω·cm²,以电解质SDC支撑的单电池NiO-SDC/SDC/La_1.90Bi_0.10O₄在700℃的最大输出功率密度为308 mW·cm^-2,电极反应的速控步骤为氧分子的扩散与表面吸附过程。     

Ni_(x)Cu_(y)-B_(24)N_(28)催化CO_(2)氧化C_(3)H_(8)速控步骤的反应机理研究北大核心CSCD

采用密度泛函理论(DFT)研究了C_(3)H_(8)和CO_(2)在Ni_(x)Cu_(y)-B_(24)N_(28)(x+y=4,x=1、2、3、4)表面吸附及速控步骤反应机理.计算了C_(3)H_(8)、CO_(2)和相应中间体在Ni_(x)Cu_(y)-B_(24)N_(28)表面的吸附能以及6条可能路径下的反应热和活化能.计算结果表明,C_(3)H_(8)和CO_(2)在Ni_(x)Cu_(y)-B_(24)N_(28)表面是物理吸附,C_(3)H_(8)+CO_(2)→CH_(3)CHCH_(3)+OCOH是最有利的路径,其在不同催化剂表面的活化能顺序是NiCu_(3)-B_(24)N_(28)(1.42 eV)、Ni_(2)Cu_(2)-B_(24)N_(28)(1.57 eV)、Ni_(3)Cu-B_(24)N_(28)(1.62 eV)、Ni_(4)-B_(24)N_(28)(1.75 eV).由此可知,在Ni_(x)Cu_(y)-B_(24)N_(28)催化CO_(2)氧化C_(3)H_(8)的体系中,Cu含量直接影响其催化活性,即NiCu_(3)-B_(24)N_(28)用于催化CO_(2)氧化C_(3)H_(8)有一定优势.     

非整比Li4-xTi5SnyO12化合物的合成及电化学性能的研究

采用流变相法合成了锡掺杂的非整比锂钛氧尖晶石化合物,并研究了不同比例的Sn髧离子掺杂对锂钛氧尖晶石结构及性能的影响。采用XRD、SEM技术对合成材料的晶体结构和微观形貌进行表征,采用恒流充、放电系统及交流阻抗测试法对合成材料的电化学性能进行了测试,结果表明:Sn髧离子掺杂在一定程度上改善了锂钛氧尖晶石作为负极材料时,不同的掺杂量,对材料的电化学性能影响不同,其中Li4-xTi5Sn0·3O12材料的性能为最佳,当电池在较低电流密度下(50 mA·g-1)充、放电时,Li4-xTi5Sn0·3O12材料的首次放电比容量为236 mAh·g-1,在随后提高充、放电倍率过程中(由1C增到4C进行充、放电),当循环105次后,Li4-xTi5Sn0·3O12材料的放电比容量仍保持在109.8 mAh·g-1,与纯样品或其它非整比掺杂样品锂钛氧尖晶石比较,Li4-xTi5Sn0·3O12表现优良的电化学循环性能。本文还对锡掺杂导致锂钛尖晶石材料性能改善的原因也进行了初步探索。     

Hydrothermal synthesis and structure of the first tin(II) squarate Sn2O(C4O4)(H2O)—comparison with Sn2[Sn2O2F4]

A tin(II) squarate Sn₂O(C₄O₄)(H₂O) was synthesized by hydrothermal technique. It crystallizes in the monoclinic system, space group C2/m (no. 12) with lattice parameters a=12.7380(9) Å, b=7.9000(3) Å, c=8.3490(5) Å, β=121.975(3)°, V=712.69(7) Å³, Z=4. The crystal structure determined with an R=0.042 factor, consists of [(Sn₄O₁₀)(H₂O)₂] units connected from one another in the [101] and [010] directions via squarate groups to form layers separated by Sn(II) lone pairs. This compound presents the same remarkable structural arrangement as observed in the tin-oxo-fluoride Sn₂[Sn₂O₂F₄] inorganic compound with Sn(II) lone pairs E(1) and E(2) concentrated in large rectangular-shape tunnels running along [001] direction.     

单分散NixZn1-xFe2O4纳米颗粒的制备及其磁热效应

以乙酰丙酮金属盐为前驱体,三乙二醇为溶剂,采用多元醇法制备了镍锌不同配比的Ni_xZn_(1-x)Fe_2O_4(x=0,0.3,0.5,0.7和1.0)铁氧体,并通过X射线衍射仪(XRD),透射电子显微镜(TEM)和振动样品磁强计(VSM)等对样品的结构、形貌、磁性能和磁热性能进行了表征。结果表明:Ni_xZn_(1-x)Fe_2O_4铁氧体分散性较好,尺寸均一,形状近似球形,平均粒径为4~5 nm。Ni_xZn_(1-x)Fe_2O_4纳米颗粒在室温下表现出亚铁磁性,饱和磁化强度随着镍含量的增加先增大后减小,当x=0.5时达到最大值29.38 emu·g~(-1)。在382k Hz交变磁场作用下,Ni_(0.5)Zn_(0.5)Fe_2O_4铁氧体温度可升温至313 K,表现出较好的磁热性能。     

熔盐快速合成Pb1-xLaxTiO3粉体

采用全氧化物为原料，利用熔盐法合成了Pb_1-xLa_xTiO₃(0.0≤x≤0.40)，当x=0.45时，烧绿石相La₂Ti₂O₇出现。计算了合成反应活化能，并在700 ℃下在NaCl-KCl体系中仅用5 min就合成了Pb_0.9La_0.1TiO₃。Pb_1-xLa_xTiO₃陶瓷在0.00≤x<0.25时，晶体结构为四方相，在0.25≤x≤0.40时为立方相。采用700 ℃ NaCl-KCl和900 ℃的Na₂SO₄-K₂SO₄两种熔盐体系获得了尺寸分布集中的球形颗粒，这些表明熔盐法晶体生长为扩散控制生长机理。     

中温固体氧化物燃料电池阴极材料Nd2-xSrxCuO4的制备与性能研究

采用固相法合成了类钙钛矿结构的中温固体氧化物燃料电池(IT-SOFC)阴极材料Nd2-xSrxCuO4(简称NSC,x=0.0～0.1).通过XRD和SEM对材料进行了表征.结果表明该阴极材料与电解质Ce0.9Gd0.1O1.9(CGO)在1 000℃烧结4 h后不发生化学反应,具有良好的化学相容性;且烧结后二者之间能形成良好的接触界面.利用交流阻抗谱研究了电极的性能.发现随着Sr掺杂量的增加,极化电阻逐渐减小,其中Nd1.93Sr0.07CuO4在空气中的极化电阻最小,750℃时仅为0.14 Ω·cm2.700℃时,电极反应的速率控制步骤为电极上发生的电荷转移过程.