带有可调通道的嵌段共聚物胶束对药物的控制释放

用聚丙烯酸叔丁酯-b-聚乙二醇(PtBA45-b-PEG114)和聚丙烯酸叔丁酯-b-聚4-乙烯基吡啶(PtBA60-b-P4VP80)制备了复合胶束. 该胶束在pH=2.5的酸性水溶液中形成以PtBA为核, PEG和P4VP为壳的稳定球型结构. 在pH=12时, 壳层的P4VP链段变为疏水, 塌缩在PtBA的核上形成内壳, PEG链段继续保持溶解状态, 与成核的PtBA连接并穿过塌陷的P4VP内壳, 形成胶束的冠, 由于PEG处于溶解状态, 其分子链间有比较大的空隙, 可以控制一些小分子通过, 在胶束的表面形成通道. 该通道类似于生物膜的蛋白通道, 可以控制PtBA核与外界进行能量或物质交换的速度. 以布洛芬为模型分子, 负载在胶束内进行药物控制释放研究的结果表明, 胶束表面的通道可以起到明显控制布洛芬释放速度的作用, 并且药物的释放速度与通道在胶束表面的比例成正比.     

光敏性双亲共聚物在水溶液中的胶束化行为

通过ε-己内酯改性丙烯酸酯(FAa，n=1～4)与肉桂酰氯间的酰化反应合成了一系列光敏性大单体(FAaC)，与甲基丙烯酸(MAA)在溶液中进行自由基聚合，制备了具有光敏性的双素无规共聚物(PMFAaC)。将PMFAaC在选择性溶剂中进行自组装，可以形成纳米结构的聚合物。用动态激光光散射(DLS)研究了聚合物胶束的溶液行为，同时考察了单体含量、聚合物终浓度、聚合物侧链长、pH值、离子强度及温度等因素对胶束粒径的影响。实验结果表明，PMFAaC在选择性溶剂中可自组装成胶束，其粒径及其分布对单体含量、聚合物终浓度、聚合物侧链长、pH值、离子强度等有一定的依赖性，而对温度无依赖性。进一步用紫外光使肉桂酰基发生交联反应。从而制备得到核交联且稳定的纳米胶束。用DIS表征发现交联后的胶束粒径较交联前的小。     

双亲嵌段共聚物PSt-b-PAA在甲苯中的自聚集行为

以α-溴乙苯为引发剂,溴化亚铜为催化剂,2,2'-联吡啶为配体,用原子转移自由基聚合(ATRP)法合成了结构一定的嵌段共聚物聚苯乙烯-b-聚丙烯酸丁酯(PSt-b-PBA).经水解制备了双亲性嵌段共聚物聚苯乙烯-b-聚丙烯酸(PSt-b-PAA);采用单溶剂溶解法配制了PSt-b-PAA在甲苯中的反胶束溶液;以极性荧光化合物N-1-萘乙二胺盐酸盐(NEAH)为极性微区探针,用荧光光谱法并配合透射电镜观察探索了双亲嵌段共聚物PSt-b-PAA在甲苯溶液中的自聚集行为,考察了双亲性嵌段共聚物浓度、链结构及温度等因素对反胶束化行为的影响规律.结果表明,亲水链PAA短而亲油链PSt长的双亲嵌段共聚物PSt-b-PAA,用单溶剂溶解法可使其在甲苯中发生自聚集,形成以亲水段为核,疏水段为壳的星状反胶束结构;反胶束为10-20nm的球形聚集态结构;PSt-b-PAA的自聚集行为及临界胶束浓度与分子链的微结构和温度等因素相关,且随着共聚物浓度的增大,小胶束会逐渐结合形成大的纺垂状聚集体.     

介孔核结构聚合物胶束的制备及其在汞离子检测中的应用

通过可逆加成-断裂链转移聚合(RAFT)和原子转移自由基聚合(ATRP)设计合成了具有p H响应性和还原响应性的双亲性聚合物分子刷,聚聚(乙二醇)单甲醚甲基丙烯酸酯-block-(聚甲基丙烯酸叔丁酯-graft-聚甲基丙烯酸N,N-二甲氨基乙酯)(POEGMA-b-(Pt BMA-g-PDMAEMA)),其中侧链PDMAEMA与主链通过二硫键相连.运用核磁共振氢谱(1H-NMR)和凝胶渗透色谱(GPC)表征了聚合物的结构、分子量及分子量分布.在碱性条件下,聚合物分子刷自组装成以POEGMA为壳,Pt BMA和PDMAEMA为核的多组分胶束.由于Pt BMA和PDMAEMA互不相容,在核中形成微相分离,体积分数较大的Pt BMA形成连续相,体积分数较小的PDMAEMA形成分散相.调节p H至酸性条件后,分散相PDMAEMA由坍陷变为伸展状态,从胶束的核中溶解出来.加入还原剂断开侧链PDMAEMA与主链相连的二硫键,制得孔内壁含有巯基的介孔核结构聚合物胶束.利用透射电镜(TEM)和动态光散射(DLS)表征了胶束的形貌和粒径.通过TEM结果得出介孔核结构聚合物胶束的孔径大小约为2 nm.利用巯基对氯金酸的还原作用和对金纳米粒子的稳定作用,制得孔内修饰金纳米粒子的介孔核结构聚合物胶束.利用巯基和溴的点击反应,制得孔内修饰聚噻吩衍生物的介孔核结构聚合物胶束,其对Hg~(2+)检测表现出较高的灵敏度和特异性.     

侧链为光敏感基团的可生物降解聚氨酯的合成及表征

设计合成2-甲基-2-肉桂酰氧甲基-1,3-丙二醇(MCO)作为扩链剂,并以聚乳酸二醇(PLA diol)为软段,异佛尔酮二异氰酸酯(IPDI)和MCO为硬段制备了一系列侧链含有肉桂基团的可生物降解聚氨酯.结果表明MCO具有较高的反应活性,可满足制备高分子量聚氨酯的要求.聚氨酯结构中的肉桂双键可在紫外光和光引发剂的共同作用下,发生快速的交联反应,短时间内形成交联结构.软段结构相同时,凝胶含量随MCO含量的增加而增加.硬段结构相同时,凝胶含量随软段分子量的增加而减少.适度的交联可提高拉伸强度和形变回复率.     

乙二醇-聚(咪唑丙基-天冬酰胺)-聚丙氨酸三嵌段共聚物的合成及其pH-响应性药物控制释放性能的研究

聚天冬氨酸及其衍生物是一种具有良好生物相容性和可生物降解性的高分子材料, 被广泛应用于生物医药领域. 本研究通过大分子引发剂ω-胺基-α-甲氧基聚乙二醇引发N-羧基-α-氨基环内酸酐开环聚合和N-(3-氨丙基)咪唑侧基改性, 制备了一种侧链含有咪唑丙基的聚乙二醇-聚(咪唑丙基-天冬酰胺)-聚丙氨酸三嵌段共聚物. 在水溶液中, 此聚合物可自组装形成一种核-壳-冠型的三层共聚物胶束, 其中疏水性的聚丙氨酸链段自聚集形成胶束的核, 聚(咪唑丙基-天冬酰胺)链段形成具有pH-响应性的壳层, 用于包埋和释放药物, 外围的聚乙二醇链段可以提供一个稳定的水合冠层, 延长药物的体内循环时间. 利用咪唑环与游离阿霉素之间的π-π相互作用和疏水相互作用可以在自组装的过程中将阿霉素包埋到胶束内. 研究发现, 载药胶束随环境pH 值的降低药物的释放速率显著增加. 这主要是由于咪唑环在酸性条件下的质子化导致链段亲疏水性质发生明显变化.     

AB型聚乙二醇单甲醚-聚(L-丙氨酸)嵌段共聚物自组装过程的核磁共振研究

利用核磁共振方法研究了AB型双嵌段共聚物(MPEG45-b-PA32)在选择性溶剂中的自组装行为及胶束化过程.嵌段共聚物在三氟乙酸中聚氨基酸和聚乙二醇链段均处于自由运动状态,聚丙氨酸链段为无规线团结构.在向该溶液中逐渐加入氘代水的过程中,聚丙氨酸链段又重新聚集形成规整的二级结构.结合1H-NMR和COSY谱分析,结果显示这一自组装过程伴随着聚(L-丙氨酸)链段由无规线团向α-螺旋结构的构象转变,同时嵌段共聚物逐渐形成核-壳型胶束结构.利用透射电镜观察了所形成胶束的形态,嵌段共聚物主要形成粒径150 nm到220 nm的球形胶束.     

双亲性光敏感遥爪聚合物C-PNIPAAm的合成与性能

以7-羟基-4-甲基香豆素为原料,依次与环氧氯丙烷、二硫化钠反应得一含香豆素基元的二硫化物(C-S-S-C),并以其与三丁基膦复合体系为链转移剂,偶氮二异丁腈(AIBN)为引发剂,N-异丙基丙烯酰胺(NIPAAm)为单体制备了末端为香豆素光响应基元的双亲性遥爪聚合物(C-PNIPAAm).用傅里叶变换红外(FT-IR)光谱、凝胶渗透色谱(GPC)、氢核磁共振(1H-NMR)等对该聚合物进行了结构表征.研究显示该双亲性遥爪聚合物可在水中直接形成胶束,并以荧光素为疏水性客体考察了聚合物胶束的光控释放行为.在波长大于310 nm的紫外光照射下,聚合物链末端的香豆素单元可进行光二聚,胶束结构随之改变,因而所负载的荧光素可得到逐步有效释放.动态激光光散射(DLS)检测显示,光二聚反应使聚合物胶束平均粒径从56.6 nm增大至101.0 nm.     

核磁共振谱研究PAA-F108-PAA 嵌段共聚物的胶束化行为

采用原子转移自由基聚合伴随水解的方法合成了聚丙烯酸-聚醚嵌段共聚物(PAA-F108-PAA), 并通过氢核磁共振波谱和二维核Overhauser效应谱(2D NOE)研究了温度、 羧酸基团中和度(α)及盐浓度对PAA-F108-PAA嵌段共聚物在水溶液中胶束化行为的影响. 结果表明, PAA-F108-PAA分子的临界胶束化温度受α影响较小, 受盐的种类和浓度影响较大. 当α=0.14(0.01 mol/L KCl)时, 在6 ℃条件下, PAA-F108-PAA分子处于塌缩状态, 而在60 ℃条件下, 聚氧化丙烯(PPO)链段发生疏水聚集形成胶束的核, PAA链段与PEO链段相互作用形成胶束的壳; 当α=0.80(0.01 mol/L KCl)时, 在6 ℃条件下, PAA-F108-PAA分子处于相对伸展状态, 而在60 ℃条件下, PPO链段仍发生疏水聚集形成胶束的核, PEO与PAA彼此分离形成胶束的壳. 增加KCl的浓度至1 mol/L, PAA-F108-PAA分子的临界胶束化温度显著降低, KCl对PPO和PEO链段都表现出脱水作用. 但KI的浓度增加至1 mol/L时, PAA-F108-PAA分子的临界胶束化温度仅略微增加, KI对PPO链段表现出脱水作用, 而对PEO链段表现出增溶作用.     

温度/pH响应性MPEG-b-PCL/PNVCL-b-PCL共聚物复合胶束的制备及载药性质

以基于亚胺键的嵌段共聚物为构筑单元的温度/pH响应性共聚物复合胶束(CMs), 由于具有亚胺键和核-壳-冠结构, 表现出较高的灵敏度和稳定性. 以聚乙二醇单甲醚(MPEG)、 N-乙烯基己内酰胺(NVCL)和ε-己内酯(ε-CL)为原料, 分别制备了端醛基聚乙二醇单甲醚(MPEG-CHO)、 端醛基聚N-乙烯基己内酰胺(PNVCL-CHO)和端氨基聚己内酯(H₂N-PCL), 利用希夫碱反应, 进一步制备了基于亚胺键的聚乙二醇单甲醚-b-聚己内酯(MPEG-b-PCL)和聚N-乙烯基己内酰胺-b-聚己内酯(PNVCL-b-PCL)嵌段共聚物, 对共聚物结构进行了确认. 以MPEG-b-PCL和PNVCL-b-PCL为构筑单元, 制备了共聚物复合胶束, 研究了复合胶束对阿霉素的包载、 释放性质和细胞毒性等. 研究结果表明, 室温下MPEG-b-PCL和PNVCL-b-PCL能够在水中自组装形成以PCL为核、 MPEG和PNVCL为混合壳的共聚物复合胶束, 在生理温度下, 温敏性PNVCL链段发生相变塌缩在PCL核表面, 能够防止药物扩散释放, 亲水性MPEG链段形成可控通道. 药物体外释放结果表明, 在弱酸性环境中, 亚胺键能够断裂, 胶束被破坏, 促进药物的释放, 噻唑蓝(MTT)实验表明, 复合胶束的细胞毒性较低.     

聚L-丙氨酸-聚乙二醇嵌段共聚物的胶束化行为研究

以氨基聚乙二醇单甲醚(MPEG-NH₂)为大分子引发剂, 采用开环聚合方法合成了聚L-丙氨酸-聚乙二醇嵌段共聚物(PAME), 并对其结构进行了表征; 用圆二色谱(CD)研究了嵌段共聚物在水溶液中的二级结构, 用芘荧光探针技术研究了共聚物胶束的形成及其临界胶束浓度(CMC), 利用动态光散射(DLS)和透射电镜(TEM)研究了胶束的粒径分布和形态. 结果表明, 在水溶液中共聚物链以α-螺旋构象形式存在, 在一定条件下嵌段共聚物能够形成球形的稳定胶束, PAME-1形成胶束的CMC为1.99×10^-5 mol/L, CMC值受共聚物中聚L-丙氨酸(PLA)链段含量的影响.     

Preparation and self-assembly of pH-sensitive amphiphilic comb-shaped copolymer containing long fluorinated side chains

Novel pH-sensitive amphiphilic comb-shaped copolymers containing long fluorinated side chains, which combined the characteristics of pH-sensitivity from pendent tertiary amine groups, unique hydrophobic and fluorophobic characteristic from the fluorinated moieties and hydrophilicity from the poly (ethylene glycol) segments, were designed and synthesized via radical polymerizaion of 2-(Dimethylamino) ethyl methacrylate (DMAEMA), poly (ethylene glycol) methyl ether methacrylate (PEGMA) and homemade fluorinated macromonomer (PHFBMA-GMA). The physicochemical properties of polymeric micelles prepared therefrom were investigated. The chemical structures of the copolymers were characterized by GPC, FTIR and ¹H-NMR. The critical micelle concentrations (CMC) of the copolymers in different pH (5.0 and 7.4) were determined by fluorescence spectroscopy. Larger CMCs could be obtained in lower pH since the pronation of DMAEMA moieties enhanced the hydrophilicity. With increasing the amount, as well as the molecular weight, of PHFBMA-GMA, CMC decreased significantly. As pH decreased, particle size, as well as zeta potential of the polymeric micelles increased significantly, indicating significant pH-sensitivity of the polymeric micelles. Furthermore, larger polymeric micelles were obtained with larger amount, as well as higher molecular weight, of PHFBMA-GMA. Transmission electron microscopy (TEM) showed that the morphological shapes of the copolymers performed spherical micelles. The cytotoxicity test showed that the comb-shaped copolymers performed extremely low cytotoxicity. The pH-sensitive polymeric micelles prepared from the amphiphilic comb-shaped copolymers containing long fluorinated side chains could be potential candidates for nanotanks for hydrophobic or fluorophobic molecules and drug carriers and the facile preparation might fit for large scale industrialization.     

Smart assembly behaviors of hydroxypropylcellulose-graft-poly(4-vinyl pyridine) copolymers in aqueous solution by thermo and pH stimuli

Thermo- and pH-sensitive graft copolymers, hydroxypropylcellulose-graft-poly(4-vinyl pyridine) (HPC-g-P4VP), were synthesized via atom transfer radical polymerization (ATRP) and characterized. The thermo- and pH-induced micellization and stimuli-responsive properties of HPC-g-P4VP graft copolymers in aqueous solution were investigated by transmittance, (1)H NMR, dynamic light scattering (DLS), and so on. For the pH-induced micellization, the P4VP side chains collapse to form the core of the micelles, and the HPC backbones stay in the shell to stabilize the micelles. In the case of thermoinduced micellization, the HPC backbones collapse to form the core of the micelles that was stabilized by the P4VP side chains in the shell upon heating. What's more, the cloud point of the HPC-g-P4VP copolymers in the aqueous solution could be finely tuned by changing the length of P4VP side chains or the pH values. In acidic water, the longer the side chains, the higher the cloud point. For those HPC-g-P4VP copolymers with short side chains, for example, HPC0.05-g-P4VP(3), the lower pH correlates a higher cloud point. The thermo- or pH-induced micelles also have the pH- or thermosensitivity due to their P4VP or HPC shells.     

Synthesis and micellar behavior of poly(acrylic acid-b-styrene) block copolymers

Poly(acrylic acid-b-styrene) (PAA-b-PS) amphiphilic block copolymers were synthesized by consecutive telomerization of tert-butyl acrylate, atom transfer radical polymerization (ATRP) of styrene, and hydrolysis. The resulting block copolymers were characterized by ¹H NMR and GPC. These amphiphilic block copolymeric micelles were prepared by dialysis against water. Transmission electron micrograph (TEM) and laser particle sizer measurements were used to determine the morphology and size of these micelles. The results showed that these amphiphilic block copolymers formed spherical micelles with average size of 140–190?nm. The critical micelle concentration (CMC) and the kinetic stability of these micelles were investigated by fluorescence technique, using pyrene as a fluorescence probe. The observed CMC value was in the range of 0.075–0.351?mg/L. Kinetic stability studies showed that the stability of micelles increased with the decrease of the pH value of the solution.     

叶酸高分子纳米胶束在小鼠体内的靶向分布

合成了带有叶酸靶向和荧光染料的聚合物FA-PEG-PLA和mPEG-b-P（LA-co-MHC／NIR）,通过混合胶束的方法制备近红外染料胶束P（NIR）（含染料NIR6％）,叶酸胶束FA-P（NIR）1（含染料NIR5．4％,叶酸LFA0．5％）和叶酸胶束FA-P（NIR）2（含染料NIR4．8％,叶酸FA0．9％）;建立了H22肝癌小鼠模型,考察了高分子纳米胶束及叶酸靶向纳米胶束在H22肝癌小鼠体内分布．结果表明,高分子纳米胶束及叶酸靶向纳米胶束在小鼠体内分布都具有时间相关性,无叶酸配体的高分子纳米胶束在尾静脉注射24h后在肿瘤部位有少量聚集,大部分胶束在肝部聚集,30h内大部分已被排泄系统排出体外;含有叶酸配体的纳米胶束在尾静脉注射后6-30h内在肿瘤部位有明显的聚集,其中,FA-P（NIR）1胶束在肿瘤和肝部位的聚集相当,FA-P（NIR）2胶束在静脉注射24h后在肿瘤聚集明显高于肝部．带有叶酸配体的高分子纳米胶束相对于不带叶酸配体的纳米胶束在小鼠肿瘤部位具有明显的聚集,并且随着叶酸含量的增大,聚集效果更明显．     

Nanosized Micelles Self-Assembled from amphiphilic dextran-graft-methoxypolyethylene glycol/poly(ε-caprolactone) copolymers

A series of amphiphilic copolymers, dextran-graft-methoxypolyethylene glycol/poly(ε-caprolactone) (Dex-g-mPEG/PCL) were synthesized by grafting both PCL and mPEG chains to dextran, and subsequently the micellar self-assembly behavior of resultant copolymers was investigated. PCL was designed by using Fmoc-protected valine other than organometallic catalyst as the initiator to ring-opening polymerize ε-caprolactone (CL) in view of the safety demand as well as the extra application potential resulting from -NH₂ group introduced after Fmoc deprotection. All the copolymers were characterized by ¹H NMR, FT-IR and GPC measurements. The prepared copolymers are capable of self-assembling into nanosized spherical micelles in aqueous solution with the diameter of around 100-200 nm determined by TEM image and DLS measurement. The critical micellar concentration (CMC) of the graft copolymers is in the range of 10-100 mg/L determined by the fluorescence robe technique using pyrene. The result also indicated that the CMC of self-assembled micelles could be adjusted by controlling the degree of substitution of mPEG and PCL, and these micelles may find great potential as drug carriers in biomedical fields.     

FORMATION OF FLOWER-LIKE AGGREGATES FROM SELF-ASSEMBLING OF MICELLES WITH PEO SHELLS AND CROSS-LINKED POLYACRYLAMIDE CORES

Amphiphilic block copolymers,poly(ethylene oxide)-b-poly(N-acryloxysuccinimide) (PEO-b-PNAS) with various molecular weights have been successfully synthesized by atom transfer radical polymerization (ATRP) of NAS using functionalized PEO (PEO-Br) as ATRP macroinitiator.The self-assembling of the block copolymers in water,which is a good solvent for PEO and a non-solvent for PNAS.yielded spherical core-shell micelles with PNAS as core and PEO as shell.The cross-linked reaction of oxysuccinimide in PNAS ch...     

Polystyrene-block-polyglycidol micelles cross-linked with titanium tetraisopropoxide. laser light and small-angle X-ray scattering studies on their formation in solution

Hybrid micelles from polystyrene-block-polyglycidol (PS-b-PG) copolymers with chemically cross-linked cores by titanium tetraisopropoxide (Ti(OC(3)H(7))(4)) were prepared in toluene solution. Additionally, micellization of PS-b-PG copolymers with different mass fractions of polyglycidol (x(PG)), was studied by static and dynamic light scattering as well as small-angle X-ray scattering. It was observed that copolymers with x(PG) smaller than 0.5 self-assembled in toluene into spherical core-shell micelles with hydrodynamic radii R(h) between 12 and 23 nm. On the other hand, copolymers with larger PG content formed particles with R(h) = 50-70 nm and aggregation numbers of several thousands. The presence of these aggregates in solution was attributed to the nonequilibrated form of block copolymers upon dissolving, most probably due to hydrogen bonding. In the following, spherical PS-b-PG micelles were loaded in toluene with hydrochloric acid and titanium tetraisopropoxide. Confined hydrolysis of Ti(OC(3)H(7))(4) induced by HCl in the micellar core was confirmed by small-angle X-ray scattering experiments. The subsequent condensation of the precursor with hydroxyl groups of polyglycidol chains led to covalently stabilized hybrid organic-inorganic particles. The presence of cross-linked PS-b-PG micelles was proven in two ways. First, micelles with "frozen" core showed stable hydrodynamic size in time upon dilution below critical micellization concentration while non-cross-linked PS-b-PG micelles underwent disintegration under the same conditions within several hours. Second, light scattering experiments revealed the presence of stable, swollen particles in N,N-dimethylformamide, which is a good solvent for both blocks.     

Synthesis of Amphiphilic Graft Copolymers with Poly(2‐methyl‐2‐oxazoline) Side Chains and a Backbone Containing Chloromethylstyrene and Methyl Methacrylate

New amphiphilic graft copolymers were synthesized by means of a cationic ring‐opening polymerization of 2‐methyl‐2‐oxazoline initiated with a statistical copolymer of methyl methacrylate and chloromethylstyrene. The synthesis was carried out in benzonitrile at 110°C. The grafting reaction was quantitative and the yield of grafting was more than 90%percent;. The graft copolymers were characterized by means of NMR, FT‐IR, and UV‐VIS spectroscopy, as well as elemental analysis and viscosity measurements of their aqueous solutions. The graft copolymers revealed amphiphilic properties and evidence for the formation of micelles and molecular aggregates in aqueous solution. Graft copolymers with relatively short lateral chains are soluble in methanol but insoluble in water, while the copolymers with longer lateral chains are soluble in both methanol and water.     

Micelle or polymersome formation by PCL-PEG-PCL copolymers as drug delivery systems

Polymeric micelles and polymersomes may have great potential as the drug delivery vehicles for solubilization of hydrophobic drugs.