RECl3与丝氨酸配合行为的研究

依据相平衡结果，于水中合成了ＲＥ（Ｓｅｒ）Ｃｌ３．３Ｈ２Ｏ和ＲＥ（Ｓｅｒ）２Ｃｌ３．５Ｈ２Ｏ（ＲＥ＝Ｌａ－Ｎｄ，Ｓｍ－Ｇｄ，Ｄｙ，ｙｂ，Ｙ）等２０种固态配合笺，利用化学分析，摩尔电导，ＩＲ、ＵＶ、ＦＳ、Ｘ射线衍射分析及ＴＧ－ＤＴＧ等手段对配合物进行了表征。     

Cu（Ⅱ）—Ln（Ⅲ）双核配合物的合成,磁性和抗菌活性

合成和表征了６种以草酰胺为桥联的异双核配合物Ｃｕ（ｏｘｅｎ）Ｌｎ（ｐｈｅｎ）２（ＣｌＯ４）３（ｏｘｅｎ代表Ｎ，Ｎ－双（２－氨乙基）草酰胺根阴离子；ｐｈｅｎ为１，１０－邻菲咯啉；Ｌｎ表示Ｙ，Ｌａ，Ｃｅ，Ｎｄ，Ｇｄ和Ｙｂ）测定了Ｃｕ（ｏｘｅｎ）Ｇｄ（ｐｈｅｎ）２（ＣｌＯ４）３．Ｈ２Ｏ的变温磁化率（４－３００Ｋ），并用最小二乘法和从自旋Ｈａｍｉｌｔｏｎｉａｎ算符Ｈ＝－２ＪＳ１。Ｓ２导出的磁方程拟合，求得     

Gd（ClO_4）_3·3H_2O－18C6－CH_3CN三元体系25℃相平衡研究及配合物的合成与表征

采用半微量相平衡方法研究了Ｇｄ（ＣｌＯ_４）_３·３Ｈ_２Ｏ－１８Ｃ６－ＣＨ_３ＣＮ三元体系在２５℃时的溶解度，测定了饱和溶液的折光率。结果表明，该体系在２５℃时形成两种化学计量的配合物，其组成分别为：Ｇｄ（ＣｌＯ_４）_３·１８Ｃ６·３Ｈ_２Ｏ·２ＣＨ_３ＣＮ和Ｇｄ（ＣｌＯ_４）_３·２（１８Ｃ６）·３Ｈ_２Ｏ·２ＣＨ_３ＣＮ，制备了固态配合物，用化学分析及元素分析、ＩＲ、ＤＴＧ、ＴＧ及ＤＳＣ等研究了配合物的组成与性质。     

三水合希土氯化物（镨、钆）与18－冠－6配合物的热化学研究

制备了ＲＥＣｌ３·３Ｈ２Ｏ（ＲＥ＝Ｐｒ、Ｇｄ）与１８Ｃ６的固态配合物，其化学组成为：ＲＥＣｌ３·１８Ｃ６·３Ｈ２Ｏ．对其进行了ＩＲ、溶解度、ＤＴＧ和ＴＧ分析．推测了热分解机理．测量了２９８．１５Ｋ时１８Ｃ６及两种配合物在无水乙醇中的积分溶解热，以及ＲＥＣｌ３·３Ｈ２Ｏ在１８Ｃ６－Ｃ２Ｈ５ＯＨ溶液中的溶解配位热效应．依据本文所设计的热化学循环，求得了ＲＥＣｌ３·３Ｈ２Ｏ（ｓ）与１８Ｃ６（Ｓ）生成ＲＥＣｌ３·１８Ｃ６·３Ｈ２Ｏ（Ｓ）的反应热及两种配合物的标准生成焓．     

脱氧核糖核酸变性和损伤的吸附伏安法研究

本文用汞电极（ＨＭＤＥ）二次导数阴极吸附伏安（ＳＤ－ＡｄＣＳＶ）和碳电极（ＧＣＥ、ＣＰＥ）导数循环伏安（ＦＤ－ＣＶ）法研究了核酸受热、紫外线、超声波和丝裂霉素Ｃ（ＭＭＣ）作用下的变性作用。在０．１ｍｏｌ／Ｌ（Ｋ２ＨＰＯ４＋ＫＨ２ＰＯ４）－０．１ｍｏｌ．Ｌ ＮａＣｌ（ｐＨ７．０）底液中，吸附的单股（ｓｓ－）和双螺旋（ｄｓ－）ＤＮＡ分别在ＨＭＤＥ上得到特征还原峰Ｐ３和Ｐ２，和在碳电极上得到氧化峰Ａ。物     

类水滑石［Cd_xMg_（6－x）Al_2（OH）_（16）］~（2＋）［S·2

用中温水热法合成了类水滑石［Ｃｄ_ｘＭｇ_（６－ｘ）Ａｌ_２（ＯＨ）_（１６）］~（２＋）［Ｓ·２Ｈ_２Ｏ］~（２－），探讨了ｐＨ值、投入Ｃｄ~（２＋）离子的量以及硫化时间等条件对合成的影响，并用ＸＲＤ、ＦＴ－ＩＲ、ＤＴＡ－ＴＧ等手段进行了表征，找出了合成层间嵌入Ｓ~（２－）离子的含Ｃｄ类水滑石的最佳条件．     

La(ClO4)3-OCBAAP-H2O体系(30℃)溶度及Ln(OCBAAP)4(ClO4)3·nH2O的合成和表征

测定了三元体系Ｌａ（ＣｌＯ４）３－ＯＣＢＡＡＰ－Ｈ２Ｏ在３０℃时的溶解度．结果表明，该体系有一个新固相（不一致溶解化合物）Ｌａ（ＯＣＢＡＡＰ）４（ＣｌＯ４）３·６Ｈ２Ｏ形成．参考该体系溶度图确定合成条件，合成了系列化合物Ｌｎ（ＯＣＢＡＡＰ）４（ＣｌＯ４）３·ｎＨ２Ｏ（Ｌｎ＝Ｌａ，ｎ＝６；Ｌｎ＝Ｐｒ，Ｎｄ，Ｓｍ，Ｇｄ，Ｙｂ，ｎ＝２）．通过化学分析、元素分析、ＴＧ－ＤＴＧ、ＩＲ和密度对化合物进行了表征，计算了Ｌａ（ＯＣＢＡＡＰ）４（ＣｌＯ４）３热分解过程各阶段的表观活化能．     

LB膜技术对葡萄糖氧化酶分子构象的影响

利用π－Ａ曲线、布儒斯特角显微镜（ＢＡＭ）及ＣＤ光谱对葡萄糖氧化酶（ＧＯＤ）的甲醇溶液铺展在ＣｄＣｌ２水溶液和纯水表面上形成的单分子膜进行了研究，以了解ＧＯＤ分子的自组和折叠情况，发现甲醇或者ＣｄＣｌ２都能ＧＯＤ分子更加疏水，易形成单分子膜，铺展在ＣｄＣｌ２溶液上比铺展在纯水上更加能使ＧＯＤ的单分子膜排列紧密，在表面压较高时，能观察到形成了第二层膜，并且使ＧＯＤ分子的构象从β－折叠片向α－螺旋转变     

石墨炉原子吸收光谱中GdCl3,Gd（NO3）3基体的背景吸收

研究了石墨炉原子吸收光谱中ＧｄＣｌ３、Ｇｄ（ＮＯ３）３基体的背影吸收影响。背景吸收波长特性的研究表明，ＧｄＣｌ３和Ｇｄ（ＮＯ３）３的背景吸收都具有明显的波长特性。蒸发行为研究表明ＧｄＣｌ３的背景吸收主要来自ＧｄＣｌ３的分子蒸气，Ｇｄ（ＮＯ３）３的背景吸收主要来自ＮＯ。钆基体的背景吸收峰高与灰化有关，ＧｄＣｌ３背上曲线轮廓与原子化温度和原子化方式有关。Ｇｄ（ＮＯ３）３的背景吸收远小于ＧｄＣｌ３。本文     

类水滑石[CdxMg6—xAl2（OH）16]^2＋[S.2H2O]^2—l的合成与表征

用中温水热法合成了类水滑石〔ＣｄｘＭｇ６－ｘＡｌ２（ＯＨ）１６〕＾２＋〔Ｓ．２Ｈ２Ｏ〕＾２－，探讨了ＰＨ值、投入Ｃｄ＾２＋离子的量以及硫化时间等条件对合成的影响，并用ＸＲＤ、ＦＴ－ＩＲ、ＤＴＡ－ＴＧ等手段进行了表征，找出了合成层间嵌入Ｓ＾２－离子的含Ｃｄ类水滑石的最佳条件。     

Influence of specimen geometry on the slow crack growth testing of HDPE for pipe applications

The majority of field failures in piping are attributable to slow crack growth (SCG) fractures. These fractures are characterized by the stable growth of a crack with little deformation in the plastic material. Slow crack growth (SCG) testing involves accelerating the growth mechanism through elevated temperature, concentrated stress, constrained geometry, surfactants or some combination of these factors. Some of these accelerated tests, Pennsylvania Edge-Notch Tensile (PENT) and Full Notch Creep Tests (FNCT), have been designed specifically to promote the SCG failure by stress concentration. However, the development of new polymeric materials used in pipes for transportation, has greatly increased the time required to happen SCG failure through these accelerated tests. Recently, new specific geometries for specimens to promote the failure by SCG have been analyzed, such as the Circumferentially Deep Notched Tensile (CDNT) sample.In this work, the reliability of the CDNT specimen to promote SCG failure on two types of ethylene copolymers was studied. The ligament surfaces after failure were analyzed to identify the SCG. The failure times were compared with those obtained on the same materials tested with a PENT geometry.     

Effect of γ-irradiation on slow crack growth in a copolymer of polyethylene

The effect of γ-irradiation on slow crack growth (SCG) in a medium density polyethylene (MDPE) was measured and compared with behavior of high density polyethylene (HDPE) and a recrystallized HDPE (RCHDPE). The three materials exhibited the same dependence on dose up to 3 Mrd. The HDPE became brittle above 50 Mrd. The resistance to SCG of MDPE and RCHDPE increased very rapidly with dose above 3 Mrd, until at 50–80 Mrd their resistance to SCG became extraordinarily high. This high resistance to SCG was accompanied by a transition from crazing to shear deformation at the root of a notch. It was found that for the same concentration, crosslinks are more effective than short chain branches for increasing resistance to SCG. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. B Polym. Phys. 36: 2349–2354, 1998     

立体构造石墨烯材料对铅酸蓄电池负极性能影响的研究

以具有高比表面积、优良的导电性和高稳定性的立体构造石墨烯材料（stereotaxically-constructed graphene, SCG）作为添加剂,加入到铅酸蓄电池负极活性材料中,通过XRD、SEM和电化学测试手段系统地分析其对电池性能的影响. 结果表明,SCG材料可以抑制硫酸铅晶体的生长,促进硫酸铅向海绵状铅的转变,延缓不可逆硫酸铅在负极的积累,在0.1 C放电速率下,添加有SCG材料的铅酸蓄电池的负极活性材料的初始放电容量为173.8 mAh·g ^-1,比未添加碳材料的(151.6 mAh·g ^-1)高14%. 在高速率部分荷电状态(HRPSoC)条件下, 添加SCG材料的电池循环寿命达到10,889圈,是未在负极活性材料中添加碳材料的电池的循环寿命的303%. 这些结果验证了立体构造石墨烯材料对铅酸蓄电池的积极影响,展现了其在铅酸蓄电池中的良好的应用前景.     

Polydopamine-mediated synthesis of Si@carbon@graphene aerogels for enhanced lithium storage with long cycle life

The application of Si as the anode materials for lithium-ion batteries (LIBs) is still severely hindered by the rapid capacity decay due to the structural damage caused by large volume change (> 300%) during cycling. Herein, a three-dimensional (3D) aerogel anode of Si@carbon@graphene (SCG) is rationally constructed via a polydopamine-assisted strategy. Polydopamine is coated on Si nanoparticles to serve as an interface linker to initiate the assembly of Si and graphene oxide, which plays a crucial role in the successful fabrication of SCG aerogels. After annealing the polydopamine is converted into N-doped carbon (N-carbon) coatings to protect Si materials. The dual protection from N-carbon and graphene aerogels synergistically improves the structural stability and electronic conductivity of Si, thereby leading to the significantly improved lithium storage properties. Electrochemical tests show that the SCG with optimized graphene content delivers a high capacity (712 mAh/g at 100 mA/g) and robust cycling stability (402 mAh/g at 1 A/g after 1500 cycles). Furthermore, the full cell using SCG aerogels as anode exhibits a reversible capacity of 187.6 mAh/g after 80 cycles at 0.1 A/g. This work provides a plausible strategy for developing Si anode in LIBs.     

Optimization of High Solids Dilute Acid Hydrolysis of Spent Coffee Ground at Mild Temperature for Enzymatic Saccharification and Microbial Oil Fermentation

Soluble coffee, being one of the world’s most popular consuming drinks, produces a considerable amount of spent coffee ground (SCG) along with its production. The SCG could function as a potential lignocellulosic feedstock for production of bioproducts. The objective of this study is to investigate the possible optimal condition of dilute acid hydrolysis (DAH) at high solids and mild temperature condition to release the reducing sugars from SCG. The optimal condition was found to be 5.3 % (w/w) sulfuric acid concentration and 118 min reaction time. Under the optimal condition, the mean yield of reducing sugars from enzymatic saccharification of defatted SCG acid hydrolysate was 563 mg/g. The SCG hydrolysate was then successfully applied to culture Lipomyces starkeyi for microbial oil fermentation without showing any inhibition. The results suggested that dilute acid hydrolysis followed by enzymatic saccharification has the great potential to convert SCG carbohydrates to reducing sugars. This study is useful for the further developing of biorefinery using SCG as feedstock at a large scale.     

The effect of γ-irradiation on slow crack growth in polyethylene

HDPE was γ-irradiated at room temperature. The resistance to slow crack growth (SCG) was measured in single edge notched tensile specimens under constant load as a function of the dose. The resistance to SCG initially decreased to a minimum value at a dose between 0.05 and 0.10 Mrd. The minimum value was 45% less than for the undosed state. For doses greater than 0.10 Mrd, the resistance to SCG increased up to a dose of 50 Mrd, where its value had increased by a factor of 10². The gel point occurred at 1–3 Mrd. MI and the crack opening displacement exhibited maximum values at a dose of 0.1 Mrd. The behaviors of SCG, MI and crack opening displacement were consistent with the explanation that chain scission dominated for doses less than 0.1 Mrd, and cross-linking dominated at the higher doses. For doses beyond 50 Mrd, the resin became so brittle that it cracked during the loading of the specimen. Beyond the gel point the density increased from 0.9694 to 0.9716 g/cm³ at a dose of 160 Mrd. ©1995 John Wiley & Sons, Inc.     

Estimation of Slow Crack Growth Behavior in Polyethylene after Stepwise Isothermal Crystallization

The use of analytical methods to estimate the SCG resistance of PE pipe materials has been suggested due to the fact that the slow crack growth (SCG) behavior of polyethylene (PE) is governed by structural parameters such as molecular weight and side chains. In the research project presented here, the molecular structure of several commercially available polyethylene-high density (PE-HD) materials was analyzed using a modified stepwise isothermal segregation (SIS) technique and compared with results from fracture mechanics experiments. A good correlation between the SIS results and SCG rates was found. It turned out that the modified SIS technique is a fast and simple method and could be used to assess SCG resistance in PE.     

Lactic Acid Production from a Whole Slurry of Acid-Pretreated Spent Coffee Grounds by Engineered Saccharomyces cerevisiae

Spent coffee grounds (SCG) generated after coffee extraction are the main byproduct of the coffee industry. Valorization of the SCG has been increasingly focused following considerable attention in coffee consumption. Lactic acid bacteria fermentation is the primary source of generation of lactic acid, a monomer of polylactic acid that has various industrial applications; however, because of the low tolerance of lactic acid bacteria to toxic compounds, it is necessary to apply Saccharomyces cerevisiae to produce lactic acid whose tolerance to toxic compounds is higher. In this study, we evaluated the feasibility of using SCG as substrate for the production of lactic acid by S. cerevisiae strain expressing heterologous lactate dehydrogenase. The fermentation profiles of the engineered yeast showed that lactic acid production was promoted by xylose addition. From simultaneous saccharification and fermentation (SSF) using a whole slurry of acid-pretreated SCG, containing high amounts of hemicellulose fractions, lactic acid (0.11 g) and ethanol (0.10 g) per g SCG were obtained after 24 h of SSF, of which yields were 413% and 221% higher, respectively, than those of washed pretreated SCG. Thus, fermentation of whole slurry SCG by engineered S. cerevisiae is a suitable way of lactic acid production, selectively.

     

Slow crack growth resistance of modern PA-U12 grades measured by cyclic cracked round bar tests and strain hardening tests

A critical failure mechanism in long-term applications of plastic structures, such as piping systems, is considered to be crack initiation and subsequent Slow Crack Growth (SCG). Thus, safe installation and operation during service lifetime of such structures are not conceivable without the knowledge of the resistance against SCG for any new material, like Unplasticized PolyAmide 12 (PA-U12). Unfortunately, long-term static tests at elevated temperatures lead to unreasonably long test times and measurements may also be affected by thermal aging and hydrolysis. Against this backdrop, the current study examines two accelerated test methods, namely the cyclic Cracked Round Bar (CRB) test as well as the Strain Hardening (SH) test, in order to characterize the SCG behavior. Both were originally developed for PolyEthylene (PE) and successfully implemented in recent years. While the cyclic CRB test measures SCG directly, accelerated through cyclic loading, the SH test quantifies the molecular disentanglement resistance, which determines craze formation and breakdown. The focus of this work was initially put on the extension of the CRB test towards PA-U12 grades, checking the occurrence of actual crack initiation and propagation. Afterwards a correlation to SH test results was done in terms of SCG resistance. Thereby, adequate test conditions were developed and the influence of the Molecular Weight (MW), expressed by the Viscosity Number (VN) of the PA-U12 grades, was considered. Results confirm the suitability of each method to rank SCG resistance and show a good correlation of the abovementioned SMall scale Accelerated Reliable Test (SMART) methods, highlighting their sensitivity to long-term relevant molecular parameters.     

Device for co-culture of sympathetic neurons and cardiomyocytes using microfabrication

Rat superior cervical ganglion (SCG) neurons and ventricular myocytes (VMs) were co-cultured separately in a minichamber placed on a microelectrode-array (MEA) substrate. The minichamber, fabricated photolithographically using polydimethylsiloxane (PDMS), had 2 compartments, 16 microcompartments and 8 microconduits. The SCG neurons were seeded into one of the compartments and all of the microcompartments using a glass pipette controlled by a micromanipulator and a microinjector. The VMs were seeded into the other compartment. Three days after seeding of the VMs, the SCG neurons were still confined to one compartment and all of the microcompartments, and the neurites of the SCG neurons had connected with the VMs via the microconduits. Constant-voltage stimulation, using a train of biphasic square pulses (1 ms at +1 V, followed by -1 ms at 1 V), was applied to the SCG neurons in the microcompartments using 16 electrodes. Evoked responses were observed in several electrodes while electrical stimulation was applied to the SCG neurons. Two-way analysis of variance (ANOVA) revealed that the frequency of the stimulation pulses had significant effects in increasing the beat rate of the VMs, and that the interaction between the frequency and the number of the pulses also had a significant effect on the ratio. No significant increases in the beat rate were observed when propranolol, a β-adrenergic receptor antagonist, was added to the culture medium. These results suggest that synaptic pathways were formed between the SCG neurons and the VMs, and that this co-culture device can be utilized for studies of network-level interactions between sympathetic neurons and cardiomyocytes.