Potentialities of expanded natural graphite as a new transducer for NAD-dependent dehydrogenase amperometric biosensors

The present work deals with the use of the porous texture of expanded natural graphite (ENG) as transducer in order to design electrochemical biosensors. The sensing element is a NAD⁺-dependent dehydrogenase. An electrochemical pretreatment of the ENG is favorable because it allows on one hand generating functional surface groups that may act as mediators for NADH oxidation and, on the other hand, eliminating enzyme-toxic compounds. The electrocatalytic oxidation of NADH on the pretreated material leads to the formation of enzymatically active NAD⁺. However, some persistent problems, mainly related to enzyme instability, still hamper the development of the biosensors.     

Electroenzymatic reactions with sorbitol dehydrogenase on gold electrodes

Sorbitol dehydrogenase (SDH) originating from recombinant Escherichia coli cells is immobilized on gold electrodes. First of all, (4-carboxy-2,5,7-trinitrofluorenyliden)malon-nitrile (CTFM) is adsorbed on the surface as mediator. In a second step, the cofactor β-nicotinamide adenine dinucleotide (NAD⁺) is immobilized on the gold electrode. Due to the formation of a complex between the mediator and the cofactor, the electron transfer rate can be enhanced by adding calcium ions to the buffer. The immobilization of NAD⁺ and SDH on the surface has been achieved by cross-linking with the glutaraldehyde/bovine serum albumin system. The successful biofunctionalization is monitored by cyclic voltammetry.Paper presented at the “Jahrestagung der Fachgruppe Angewandte Electrochemie der Gesellschaft Deutscher Chemiker, Düsseldorf, 11.-14.09.2005”.     

Synthesis of glutamate by reductive amination of 2-oxoglutarate with the combination of hydrogenase and glutamate dehydrogenase

Glutamate synthesis by reductive amination of 2-oxoglutarate was performed by the combination of NADH regeneration system and glutamate dehydrogenase (GluDH). The conversion of 2-oxoglutamate to glutamate was 98% after 3 h, and the turnover number of NAD⁺was 17.     

Synthesis of alanine and leucine by reductive amination of 2-oxoic acid with combination of hydrogenase and dehydrogenase

Alanine synthesis by reductive amination of pyruvate was performed by the combination of NADH regeneration system and alanine dehydrogenase (AlaDH). The conversion of pyruvate to alanine was 99% after 1 h. Leucine synthesis was also carried out by the combination of NADH regeneration system and leucine dehydrogenase (LeuDH). The conversion of 4-methyl-2-oxovalerate to leucine was 60% after 1.5 h.     

Attempting to remove the substrate inhibition ofL-lactate dehydrogenase fromBacillus stearothermophilus by site-directed mutagenesis

L-lactate dehydrogenase (LDH) catalyzes the interconversion of an oxoacid (pyruvate) and hydroxy-acid (lactate) using the NADH/NAD⁺ pair as a redox cofactor. The enzyme has a commercial significance, as it can be used to produce chiral building blocks for the synthesis of key pharmaceuticals and agrochemicals. However, the substrate inhibition which is due to an abortive NAD⁺-pyruvate complex reducing the steady state concentration of functional LDH limits its use in industry. This substrate inhibition can be overcome by weaking the binding of NAD⁺. The conserved aspartic acid residue at position 38 was replaced by the longer basic arginine side chain (D38R) using PCR based overlap extension mutagenesis technique in the hope of weakening NAD⁺-binding. The mutant gene was overexpressed in theEscherichia coli high-expression vector pKK223-3 in JM105 cells; then, the mutant protein was produced. Comparing the effect of substrate inhibition in the arginine-38 mutant with wild-type, substrate inhibition is decreased threefold.     

Probing the Role of the Conserved Arg174 in Formate Dehydrogenase by Chemical Modification and Site-Directed Mutagenesis

The reactive adenosine derivative, adenosine 5′-O-[S-(4-hydroxy-2,3-dioxobutyl)]-thiophosphate (AMPS-HDB), contains a dicarbonyl group linked to the purine nucleotide at a position equivalent to the pyrophosphate region of NAD⁺. AMPS-HDB was used as a chemical label towards Candida boidinii formate dehydrogenase (CbFDH). AMPS-HDB reacts covalently with CbFDH, leading to complete inactivation of the enzyme activity. The inactivation kinetics of CbFDH fit the Kitz and Wilson model for time-dependent, irreversible inhibition (K_D = 0.66 ± 0.15 mM, first order maximum rate constant k₃ = 0.198 ± 0.06 min⁻¹). NAD⁺ and NADH protects CbFDH from inactivation by AMPS-HDB, showing the specificity of the reaction. Molecular modelling studies revealed Arg174 as a candidate residue able to be modified by the dicarbonyl group of AMPS-HDB. Arg174 is a strictly conserved residue among FDHs and is located at the Rossmann fold, the common mononucleotide-binding motif of dehydrogenases. Arg174 was replaced by Asn, using site-directed mutagenesis. The mutant enzyme CbFDHArg174Asn was showed to be resistant to inactivation by AMPS-HDB, confirming that the guanidinium group of Arg174 is the target for AMPS-HDB. The CbFDHArg174Asn mutant enzyme exhibited substantial reduced affinity for NAD⁺ and lower thermostability. The results of the study underline the pivotal and multifunctional role of Arg174 in catalysis, coenzyme binding and structural stability of CbFDH.     

Intact and permeabilized cells of the yeast Hansenula polymorpha as bioselective elements for amperometric assay of formaldehyde

Intact and permeabilized yeast cells were tested as the biorecognition elements for amperometric assay of formaldehyde (FA). For this aim, the mutant C-105 (gcr1 catX) of the methylotrophic yeast Hansenula polymorpha with a high activity of AOX was chosen. Different approaches were used for monitoring FA-dependent cell response including analysis of their oxygen consumption rate by the use of a Clark electrode, as well as assay of oxidation of redox mediator at a screen-printed platinum electrode covered by cells entrapped in Ca-alginate gel. It was shown that oxygen consumption rate of permeabilized cells reached its saturation at 4 mM of FA (23 °C). The detection limit was found to be 0.27 mM. In the presence of redox mediator 2,6-dichlorophenolindophenol (DCIP), the screen-printed platinum band electrode covered by permeabilized cells did not show any current output to FA. In contrast, well-pronounced amperometric response to FA was observed in the case of intact yeast cells in the presence of DCIP. It was shown that current output reached its maximum at 7 mM concentration of FA. The detection limit was found to be 0.74 mM. Obviously, it is necessary to perform a directed genetic engineering of the yeast cells to improve their bioanalytical characteristics in the corresponding biosensors.     

An amperometric biosensor based on peroxidases from Brassica napus for the determination of the total polyphenolic content in wine and tea samples

An amperometric biosensor based on peroxidases from Brassica napus hairy roots (PBHR) used to determine the total polyphenolic content in wine and tea samples is proposed by the first time. The method employs carbon paste (CP) electrodes filled up with PBHR, ferrocene (Fc), and multi-walled carbon nanotubes embedded in a mineral oil (MWCNT + MO) at a given composition (PBHR-Fc-MWCNT + MO). The biosensor was covered externally with a dialysis membrane, which was fixed at the electrode body side part with a Teflon laboratory film and an O-ring. Calibration curves obtained from steady-state currents as a function of the concentration of a polyphenolic standard reference compound such as t-resveratrol (t-Res) or caffeic acid (CA) were then used to estimate the total polyphenolic content in real samples. The reproducibility and the repeatability were of 7.0% and 4.1% for t-Res (8.4% and 5.2% for CA), respectively, showing a good biosensor performance. The calibration curves were linear in a concentration range from 0.05 to 52 mg L⁻¹ and 0.06 to 69 mg L⁻¹ for t-Res and CA, respectively. The lowest polyphenolic compound concentration values measured experimentally for a signal to noise ratio of 3:1 were 0.023 mg L⁻¹ and 0.020 mg L⁻¹ for t-Res and CA, respectively.     

Determination of L- and D-enantiomers of methotrexate using amperometric biosensors

In order to determine the enantiopurity of methotrexate (Mtx), seven biosensors were proposed for the assay of l-Mtx and three biosensors for the assay of d-Mtx. The biosensors were designed using physical and chemical immobilization of glutamate oxidase and/or l-amino acid oxidase (l-AAOD) and/or horseradish peroxidase (HRP) for the assay of l-methotherexate, and d-amino acid oxidase (d-AAOD) and HRP for the assay of d-Mtx. Electrode characteristics were obtained and compared for the different carbon paste based biosensors. The linear concentration ranges for the proposed biosensors were in the ranges of fmol l⁻¹ to pmol l⁻¹, magnitude order with limits of detection in the fmol l⁻¹ to nmol l⁻¹ concentration range. All biosensors were successful for the determination of the enantiopurity of Mtx as raw material, and in its pharmaceutical formulations (tablets and injections).     

A novel amperometric sensor for the detection of difenidol hydrochloride based on the modification of Ru(bpy)3 on a glassy carbon electrode

An amperometric sensor for the detection of difenidol, a tertiary amine-containing analyte, was proposed. Ruthenium(II) tris(bipyridine)/multi-walled carbon nanotubes/Nafion composite film was suggested to modify the glassy carbon electrode. The modified electrode was shown to be an excellent amperometric sensor for the detection of difenidol hydrochloride. The linear range is from 1.0 × 10⁻⁶ to 3.3 × 10⁻⁵ M with a correlation coefficient of 0.998. The limit of detection was 5 × 10⁻⁷ M, which was obtained through experimental determination based on a signal-to-noise ratio of three. The sensor was employed to the determination of the active ingredients in the tablets containing difenidol hydrochloride.     

Recycling of NAD+ using coimmobilized alcohol dehydrogenase andE. coli

The use of immobilized enzymes has opened the possibility of large scale utilization of NAD⁺-linked dehydrogenases, but the applications of this technique were limited by the necessity of providing the large amounts of NAD⁺ required by its stoichiometric consumption in the reaction. After immobilization of alcohol dehydrogenase and intactE. coli by glutaraldehyde in the presence of serum albumin, the respiratory chain was found to be capable of regenerating NAD⁺ from NADH. This NAD⁺ can be recycled at least 100 times, and thus the method is far more effective than any other, and, moreover, does not require NADH oxydase purification. The total NADH oxidase activity recovered was 10–30% of the initial activity. Although, NADH is unable to cross the cytoplasmic membrane, it was able to reach the active site of NADH dehydrogenase after immobilization. The best yield of NADH oxidase activity with immobilized bacteria was obtained without prior treatment of the bacteria to render them more permeable. The denaturation by heat of NADH oxidase in cells that are permeabilized was similar before and after immobilization. In contrast, the heat denaturation of soluble Β-galactosidase required either a higher temperature or a longer exposure after immobilization. The sensitivity of immobilized NADH oxidase to denaturation by methanol was decreased compared to permeabilized cells. As a result, it is clear that the system can function in the presence of methanol, which is necessary as a solvent for certain water insoluble substrates.     

Lichen-based biosensor for the determination of benzene and 2-chlorophenol: microcalorimetric and amperometric investigations

Preliminary microcalorimetric studies have been performed to analyse the response of a whole epiphytic lichen tissue (Evernia prunastri) to 2-chlorophenol (2Cl-), a pollutant of oil mill waste-water, in order to evaluate whether the tissue might be used to assess the toxic characteristics of polluted waters. The obtained results (lichen viability expressed in hours, enthalpy variations for the 2Cl-/lichen interactions) were used to create a lichen-based biosensor that uses an amperometric oxygen electrode (a Clark electrode) as a transducer. The lichen catalyses aromatic ring cleavage (via pyrocatechase enzymes present in the lichen), and transforms aromatic substances like 2Cl- into muconic acid (C₆H₆O₄). Following a full electroanalytical characterisation, the performance of the proposed lichen biosensor was compared to that of a biosensor based on Pseudomonas putida cells, which was originally constructed to monitor benzene in different matrices (water, air, petrol and oil) and was tested in our laboratory previously.     

A new amperometric bienzymatic biosensor based on biocomposites for the determination of gluconic acid in wines

A new amperometric bienzymatic biosensor for gluconic acid based on the coimmobilization of gluconokinase (EC 2.7.1.12) and phosphogluconate dehydrogenase (EC 1.1.1.44) by polysulfone membrane entrapment onto the surface of a graphite-epoxy composite is reported. This biosensor represents an alternative to gluconate dehydrogenase (EC 1.1.99.3) based methods, which is no longer commercially available. Measurements were done at an applied potential of +0.800 V, room temperature and phosphate buffer pH 7.50; obtaining a linear response range for gluconic acid extended from 7.0 × 10⁻⁶ to 2.5 × 10⁻⁴ M. Constructed biosensors showed good reproducibility for calibrations using different electrodes (RSD of 1.74%). Finally, biosensor was applied to real wine samples, and the results obtained were validated by comparison with those provided by a reference laboratory. Good correlation was found when the biosensor results were plotted vs. the reference values (slope = 1.03 ± 0.04, intercept = 0.01 ± 0.02, r² = 0.995).     

Catecholamine release from cultured bovine adrenal medullary chromaffin cells in the presence of 60-Hz magnetic fields

Effects of powerline frequency (50/60 Hz) electric and magnetic fields on the central nervous system may involve altered neurotransmitter release. This possibility was addressed by determining whether 60-Hz linearly polarized sinusoidal magnetic fields (MFs) alter the release of catecholamines from cultured bovine adrenal chromaffin cells, a well-characterized model of neural-type cells. Dishes of cells were placed in the center of each of two four-coil Merritt exposure systems that were enclosed within mu-metal chambers in matched incubators for simultaneous sham and MF exposure. Following 15-min MF exposure of the cells to flux densities of 0.01, 0.1, 1.0 or 2 mT, norepinephrine and epinephrine release were quantified by high-performance liquid chromatography (HPLC) coupled with electrochemical detection. No significant differences in the release of either norepinephrine or epinephrine were detected between sham-exposed cells and cells exposed to MFs in either the absence or presence of Bay K-8644 (2 microM) or dimethylphenylpiperazinium (DMPP, 10 microM). Consistent with these null findings is the lack of effect of MF exposure on calcium influx. We conclude that catecholamine release from chromaffin cells is not sensitive to 60-Hz MFs at magnetic flux densities in the 0.01-2 mT range.     

Amperometric cholesterol biosensors based on the electropolymerization of pyrrole and the electrocatalytic effect of Prussian-Blue layers helped with self-assembled monolayers

Three cholesterol biosensor configurations based on the formation of a layer of Prussian-Blue (PB) on a Pt electrode for the electrocatalytic detection of the H₂O₂ generated during the enzymatic reaction of cholesterol with cholesterol oxidase (ChOx) were constructed. The enzyme was entrapped within a polypyrrole (PPy) layer electropolymerized onto the PB film. The influence of the formation of self-assembled monolayers (SAMs) on the Pt surface on the adherence and stability of the PB layer and the formation of an outer layer of nafion (Nf) as a means of improving selectivity were both studied. A comparative study was made of the analytical properties of the biosensors corresponding to the three configurations named: Pt/PB/PPy-ChOx, Pt/SAM/PB/PPy-ChOx and Pt/SAM/PB/PPy-ChOx/Nf. The sensitivity (from 600 to 8500 nA mM⁻¹ cm⁻²) and selectivity of the developed biosensors permitted the determination of the cholesterol content in reference and synthetic serum samples. The detection limit for the Pt/SAM/PB/PPy-ChOx/Nf biosensor was 8 μM. Formation of the SAM on the electrode surface and covering with a Nf film considerably improved the stability and lifetime of the biosensor based on the catalytic effect of the PB layer (as the PB layer was retained longer on the electrode), and the Nf layer protects the enzyme from the external flowing solutions. Lifetime is up to 25 days of use. The formation of the SAM also has an effect on the charge transfer and the formation of the PB layer.     

An amperometric lactate sensor based on a NAD+-analog and lactate dehydrogenase coimmobilized on reticulated vitreous carbon

A NAD⁺-analog was coimmobilized with lactate dehydrogenase (LDH) on reticulated vitreous carbon (RVC) to give an amperometric lactate biosensor. Both LDH and the NAD⁺ -analog were bound covalently with carbodiimide to the surface of the porous RVC-material. The electrode was operated in a FIA-arrangement in the presence or absence of a soluble mediator. Meldola Blue. The stability was poor when the electrode was operated at +400 mV (vs. Ag/AgCl) in the absence of mediator but improved most significantly in the presence of 5 μM mediator, so that 65% of the original activity remained after 16 days. The amperometric currents were smaller with regeneration by mediator at −100 mV than with direct electrochemical oxidation at +400 mV, indicating that the additional steps slow down the reaction rate. Linear calibration plots were obtained from the detection limit, 1 μM, to 500 μM lactate with 5 μM mediator, reoxidized at −100 mV. The sample throughput was about 60 h⁻¹.     

Visualized investigation of yeast transformation induced with Li+ and polyethylene glycol

The effects of Li⁺ and polyethylene glycol (PEG) on the genetic transformation of Saccharomyces cerevisiae were investigated by using fluorescence microscopy (FM) to visualize the binding of plasmid DNA labeled with YOYO-1 to the surface of yeast cells, scanning electron microscopy (SEM) and atomic force microscopy (AFM) to image the change in surface topography of yeast cells, coupled with transformation frequency experiments. The results showed that under the same conditions, the transformation frequencies of yeast protoplasts were much higher than those of intact yeast cells. PEG was absolutely required for the binding of DNA to the surface of intact yeast cells or yeast protoplasts, and had no effect on the surface topography of intact yeast cells or yeast protoplasts. In the presence of PEG, Li⁺ could greatly enhance the binding of plasmid DNA to the surface of intact yeast cells, increase their transformation frequency, and affect their surface topography. On the other hand, no effect on the DNA binding to the surface of protoplasts and no increase in the number of transformants and no surface topography changes were found upon the treatment with Li⁺ to protoplasts. In the present work, the effects of Li⁺ and PEG on yeast genetic transformation were directly visualized, rather than those deduced from the results of transformation frequencies. These results indicate that cell wall might be a barrier for the uptake of plasmid DNA. Li⁺ could increase the permeability of yeast cell wall, then increase the exposed sites of DNA binding on intact yeast cells. The main role of PEG was to induce DNA binding to cell surface.     

Bioorganometallic chemistry: biocatalytic oxidation reactions with biomimetic NAD/NADH co-factors and [Cp*Rh(bpy)H] for selective organic synthesis

The biocatalytic, regioselective hydroxylation of 2-hydroxybiphenyl to the corresponding catechol was accomplished utilizing the monooxygenase 2-hydroxybiphenyl 3-monooxygenase (HbpA). The necessary natural 1,4-dihydronicotinamde adenine dinucleotide (NADH) co-factor for this biocatalytic process was replaced by a biomimetic co-factor, N-benzyl-1,4-dihydronicotinamide, 1b. The interaction between the flavin (FAD) containing HbpA enzyme and the corresponding biomimetic NADH compound, N-benzyl-1,4-dihdronicotinamide, 1b, for hydride transfer, was shown to readily occur. The in situ recycling of the reduced NADH biomimic 1b from 1a was accomplished with [Cp*Rh(bpy)H](Cl); however, productive coupling of this regeneration reaction to the enzymatic hydroxylation reaction was not totally successful, due to a deactivation process concerning the HbpA enzyme peripheral groups; i.e., -SH or -NH₂ possibly reacting with the precatalyst, [Cp*Rh(bpy)(H₂O)](Cl)₂, and thus inhibiting the co-factor regeneration process. The deactivation mechanism was studied, and a promising strategy of derivatizing these peripheral -SH or -NH₂ groups with a polymer containing epoxide was successful in circumventing the undesired interaction between HbpA and the precatalyst. This latter strategy allowed tandem co-factor regeneration using 1a or 2a, [Cp*Rh(bpy)(H₂O)](Cl)₂, and formate ion, in conjunction with the polymer bound, FAD containing HbpA enzyme to provide the catechol product.     

Mutation of Tyr-218 to Phe in <Emphasis Type="Italic">Thermoanaerobacter ethanolicus</Emphasis> Secondary Alcohol Dehydrogenase: Effects on Bioelectronic Interface Performance

Bioelectronic interfaces that facilitate electron transfer between the electrode and a dehydrogenase enzyme have potential applications in biosensors, biocatalytic reactors, and biological fuel cells. The secondary alcohol dehydrogenase (2° ADH) from Thermoanaerobacter ethanolicus is especially well suited for the development of such bioelectronic interfaces because of its thermostability and facile production and purification. However, the natural cofactor for the enzyme, β-nicotinamide adenine dinucleotide phosphate (NADP⁺), is more expensive and less stable than β-nicotinamide adenine dinucleotide (NAD⁺). PCR-based, site-directed mutagenesis was performed on 2° ADH in an attempt to adjust the cofactor specificity toward NAD⁺ by mutating Tyr²¹⁸ to Phe (Y218F 2° ADH). This mutation increased the K _m(app) for NADP⁺ 200-fold while decreasing the K _m(app) for NAD⁺ 2.5-fold. The mutant enzyme was incorporated into a bioelectronic interface that established electrical communication between the enzyme, the NAD⁺, the electron mediator toluidine blue O (TBO), and a gold electrode. Cyclic voltammetry, impedance spectroscopy, gas chromatography, mass spectrometry, constant potential amperometry, and chronoamperometry were used to characterize the mutant and wild-type enzyme incorporated in the bioelectronic interface. The Y218F 2° ADH exhibited a fourfold increase in the turnover ratio compared to the wild type in the presence of NAD⁺. The electrochemical and kinetic measurements support the prediction that the Rossmann fold of the enzyme binds to the phosphate moiety of the cofactor. During the 45 min of continuous operation, NAD⁺ was electrically recycled 6.7 × 10⁴ times, suggesting that the Y218F 2° ADH-modified bioelectronic interface is stable.     

Covalent Immobilization of Dehydrogenases on Carbon Felt for Reusable Anodes with Effective Electrochemical Cofactor Regeneration

This study presents the immobilization with aldehyde groups (glyoxyl carbon felt) of alcohol dehydrogenase (ADH) and formate dehydrogenase (FDH) on carbon‐felt‐based electrodes. The compatibility of the immobilization method with the electrochemical application was studied with the ADH bioelectrode. The electrochemical regeneration process of nicotinamide adenine dinucleotide in its oxidized form (NAD⁺), on a carbon felt surface, has been deeply studied with tests performed at different electrical potentials. By applying a potential of 0.4 V versus Ag/AgCl electrode, a good compromise between NAD⁺ regeneration and energy consumption was observed. The effectiveness of the regeneration of NAD⁺ was confirmed by electrochemical oxidation of ethanol catalyzed by ADH in the presence of NADH, which is the no active form of the cofactor for this reaction. Good reusability was observed by using ADH immobilized on glyoxyl functionalized carbon felt with a residual activity higher than 60 % after 3 batches.