Selective C-arylation of free (NH)-heteroarenes via catalytic C-H bond functionalization

A new system for palladium-catalyzed arylation of a broad spectrum of free (NH)-heteroarenes has been developed (indole, pyrrole, pyrazole, 2-phenylimidazole, imidazole, benzimidazole, and purine). Remarkable selectivity has been achieved in the presence of MgO base, providing single C-arylation products, while no N-arylation and no bis-arylation products have been detected. In the case of free imidazole, exclusive C-4 arylation may be switched to exclusive 2-arylation by the addition of CuI to the Pd/Ph3P/MgO system. When free aryl-(NH)-azoles are desired, direct arylation eliminates three steps in comparison to standard methods, including N-protection, stoichiometric metalation or halogenation, and N-deprotection.     

Oxidative C-arylation of free (NH)-heterocycles via direct (sp3) C-H bond functionalization

The development of a new chemical transformation, namely oxidative C-arylation of saturated (NH)-heterocycles, is described. This reaction combines dehydrogenation and arylation in one process, leading to cross-coupling of (NH)-heterocycles and haloarenes. Typical reaction conditions involve heating the reaction partners in anhydrous dioxane at 120-150 degrees C in the presence of RhCl(CO)[P(Fur)3]2 as the catalyst and Cs2CO3 as the base. Addition of tert-butylethylene as the hydrogen acceptor increases the chemical yield by diminishing the dehalogenation pathway. This method demonstrated a good substrate scope, allowing for cross-coupling of a variety of (NH)-heterocycles (e.g., pyrrolidine, piperidine, piperazine, morpholine) and halo(hetero)arenes to afford valuable heterocyclic products in one step. The preliminary mechanistic studies provided some insight regarding the key events in the proposed catalytic cycle, including beta-hydride elimination of an amido rhodium complex and carbometalation of the resulting imine. A large kinetic isotope effect [KIE (kC-H/kC-D) = 4.3] suggests that one or both beta-hydride elimination steps are rate determining. The central role for the phosphine ligand was established in controlling the partitioning between the oxidative C-arylation and N-arylation pathways.     

Palladium-catalyzed asymmetric synthesis of silicon-stereogenic dibenzosiloles via enantioselective C-H bond functionalization

A Pd-catalyzed asymmetric synthesis of Si-stereogenic dibenzosiloles is developed through enantioselective C-H bond functionalization of prochiral 2-(arylsilyl)aryl triflates. High chemo- and enantioselectivities are achieved by employing a Josiphos-type ligand under mild conditions.     

Arylation of heterocycles via rhodium-catalyzed C-H bond functionalization

[reaction: see text] A new method for the rhodium-catalyzed arylation of a variety of heterocycles has been developed. The reaction provided moderate to good yields of the arylated products. A preliminary mechanistic investigation of this reaction revealed the intermediacy of an isolable N-heterocyclic carbene complex.     

Palladium-catalyzed synthesis of cyclopentane-fused benzocyclobutenes via tandem directed carbopalladation/C-H bond functionalization

A new Pd-catalyzed reaction for the stereoselective synthesis of cyclopentane-fused benzocyclobutenes is described. These transformations likely proceed via carbamate-directed carbopalladation followed by intramolecular C-H activation of an alkylpalladium intermediate. The mechanistic relationship between these transformations and Pd-catalyzed reactions of gamma-(n-Boc-amino)alkenes with aryl bromides that afford pyrrolidines is discussed. Differences in reactivity between Pd-amino and Pd-amido complexes appear to play a key role in the outcome of these transformations.     

Palladium-catalyzed C-N bond formation via direct C-H bond functionalization. Recent developments in heterocyclic synthesis

The formation of carbon-nitrogen bonds by reaction between a nitrogen atom and an unactivated carbon-hydrogen bond is a highly atom-economical process that attracted the attention of the chemists in the last two decades. The widely useful amination and hydroamination reactions, which furnish acyclic or cyclic products, give access to various nitrogen-containing basic and fine chemicals. This review highlights recent progress in the development of palladium-catalyzed reactions that occur by direct functionalization of simple carbon-hydrogen bonds to give heterocyclic products. Pd(0)- and Pd(II)-catalyzed reactions are described separately, emphasizing the different behavior of the metal in these two oxidation states.     

Palladium-catalyzed method for the synthesis of carbazoles via tandem C-H functionalization and C-N bond formation

The development of a new method for the assembly of unsymmetrical carbazoles is reported. The strategy involves the selective intramolecular functionalization of an arene C-H bond and the formation of a new arene C-N bond. The substitution pattern of the carbazole product can be controlled by the design of the biaryl amide substrate, and the method is compatible with a variety of functional groups. The utility of the new protocol was demonstrated by the concise synthesis of three natural products from commercially available materials.     

Pd-Catalyzed C-3 functionalization of indolizines via C-H bond cleavage

New transition metal-catalyzed methods for the arylation of indolizines by the direct cleavage of C-H bonds have been developed. A wide range of aryltrifluoroborate salts react with indolizines in the presence of Pd(OAc)(2) catalyst and AgOAc oxidant to give the arylated indolizines in high yields. Both electron-donating and electron-withdrawing groups perform smoothly while bromide and chlorine substituents are tolerated. In addition, the indolizines display similar reactivities in the Pd-catalyzed reaction with 3-phenylpropiolic acid to afford the corresponding C-3 alkynylated indolizines. These methods allow the direct functionalization of indolizines in one step.     

Cobalt-catalyzed arylation of azole heteroarenes via direct C-H bond functionalization

[reaction: see text] We herein report a new cobalt-catalyzed method for arylation of azole heteroarenes, including thiazole, oxazole, imidazole, benzothiazole, benzoxazole, and benzimidazole. The direct arylation of thiazole and oxazole was achieved both with iodo- and bromoarenes as the aryl donors in the presence of cobalt catalyst [Co(OAc)(2)/IMes] and cesium carbonate, while imidazole required the use of zinc oxide as the base. A complete reversal of arylation from C-5 to C-2 was accomplished using the bimetallic Co/Cu/IMes system. A direct comparison of the new cobalt method and the previously developed palladium protocol revealed significant differences, in terms of both chemical yield and selectivity.     

C-H bond functionalization in the synthesis of fused 1,2,3-triazoles

A highly modular approach to fused 1,2,3-triazoles has been developed featuring a one-pot procedure combining copper(I) catalyzed azide-alkyne cycloaddition and palladium-catalyzed C-H bond functionalization. A class of structurally unique heterocycles was synthesized in good yields.     

Metal-free intermolecular oxidative C-N bond formation via tandem C-H and N-H bond functionalization

The development of a novel intermolecular oxidative amination reaction, a synthetic transformation that involves the simultaneous functionalization of both a N-H and C-H bond, is described. The process, which is mediated by an I(III) oxidant and contains no metal catalysts, provides a rapid and green method for synthesizing protected anilines from simple arenes and phthalimide. Mechanistic investigations indicate that the reaction proceeds via nucleophilic attack of the phthalimide on an aromatic radical cation, as opposed to the electrophilic aromatic amination that has been reported for other I(III) amination reactions. The application of this new reaction to the synthesis of a variety of substituted aniline derivatives is demonstrated.     

Palladium-catalyzed synthesis of 2-substituted benzothiazoles via a C-H functionalization/intramolecular C-S bond formation process

Catalytic synthesis of 2-substituted benzothiazoles from thiobenzanilides was achieved in the presence of a palladium catalyst through C-H functionalization/C-S bond formation. This method features the use of a novel catalytic system consisting of 10 mol % of Pd(II), 50 mol % of Cu(I), and 2 equiv of Bu4NBr that produced variously substituted benzothiazoles in high yields with good functional group tolerance.     

A new dirhodium catalyst with hemilabile tropolonato ligands for C-H bond functionalization

Don't hold on too tightly! In a new dirhodium catalyst for C-H functionalization reactions, two tropolonato ligands are introduced as hemilabile chelating ligands (see scheme). Only two bridges hold the Rh-Rh core together. The tropolonato ligands can liberate a binding site in the equatorial coordination sphere of the catalyst. This opens a doorway to new mechanistic channels in C-H functionalization.     

1,3-Diol synthesis via controlled, radical-mediated C-H functionalization

The invention of a method for the synthesis of 1,3-diols from the corresponding alcohols is described, via controlled, radical-mediated C-H functionalization. The sequence described herein entails near quantitative conversion to the corresponding trifluoroethyl carbamate, followed by a variant of the Hofmann-L?ffler-Freytag reaction, cyclization, and hydrolysis to provide the 1,3-diols. In addition to the 10 examples presented herein, the syntheses of four natural products are facilitated by this directed oxyfunctionalization. This methodology is demonstrated to be orthogonal to other known C-H oxidations. Finally, this sequence is efficient, practical, inexpensive, and scalable.     

Synthesis of pyridines from ketoximes and terminal alkynes via C-H bond functionalization

An expedient one-pot rhodium catalyzed C-H bond functionalization/electrocyclization/dehydration procedure has been developed for the synthesis of highly substituted pyridine derivatives from terminal alkynes and α,β-unsaturated ketoximes. The use of electron-deficient phosphite ligands is important to suppress dimerization of the terminal alkynes to enynes.     

Rhodium(III)-catalyzed arylation of Boc-imines via C-H bond functionalization

The first rhodium-catalyzed arylation of imines proceeding via C-H bond functionalization is reported. Use of a non-coordinating halide abstractor is important to obtain reactivity. Aryl-branched N-Boc-amines are formed, and a wide range of functionality is compatible with the reaction.     

Synthesis of condensed pyrroloindoles via Pd-catalyzed intramolecular C-H bond functionalization of pyrroles

A new strategy for the synthesis of condensed hetero- or carbocycles such as pyrroloindoles or fluorenes has been developed that involves the Pd-catalyzed cyclization of readily available N-(2-halobenzyl)pyrroles or their phenyl derivatives. The reaction is proposed to proceed via oxidative addition of benzylic halides to Pd(0) followed by base-assisted C-H bond activation. A broad range of condensed cyclic products could be obtained in good to excellent yields under mild conditions.     

Dinuclear gold-catalyzed C-H bond functionalization of cyclopropenes

Science China Chemistry - We report an unprecedented C–H bond functionalization of cyclopropenes enabled by dinuclear gold catalysis. Highly selective C–H allylation, alkynylation and...