The dynamik contact angle II. Investigation of the adsorption mechanism based on the measurement of the preceding contact angles

The structure of the adsorption layer at the solid/gas interface is characterized, as a function of conditioning concentration, by the measurement of preceding contact angles. The contact angles were determined tensiometrically (plate method) and cinema tographically (capillary rise method) in the system glass or mercury/n-dodecyl ammonium chloride solution/air, respectively. In the dependence of contact angle on concentration, four regions are provable. These regions correlate with the surfactants, which are bound to adsorption in a heteropolar mode or by van der Waals forces of interaction, with the formation of layer-like coverage and with bilayers. Special attention was given to the fact that loosely bound surfactants are transferred from the solid/gas interface to the liquid/gas interface and cause a reduction of the preceding contact angle.Publication No. 1077 from the Research Institut of Mineral Processing, Academy of Sciences of the GDR, Freiberg, G.D.R.     

Surface heterogeneity and contact angle hysteresis

The effect of surface heterogeneity on contact angle hysteresis is studied by using the model of Neumann and Good of a vertical plate with horizontal heterogeneous strips. The results of this study explain well known, but not understood patterns of contact angle behaviour: On the one hand, the advancing contact angle on a carefully prepared solid surface is generally reproducible; on the other hand, even a very small amount of surface heterogeneity may cause the receding contact angle to be less reproducible and to depend on several non-thermodynamic factors.     

Effects of simulated acid rain on the surface tension of selected leaves

In this study the effect of simulated acid rain on the surface tension of leaves of selected crop plants is reported. The contact angle measurements of liquids (water and n-propanol mixtures) on various plant leaves (bean, mustard, lettuce, cress) showed that the acid rain effect can be investigated when analyses of the surface tension of leaves are estimated. Acid rain was found to give rise to a change in the polar surface tension of leaves, while the apolar surface tension was unaffected. This effect was strongest in bean leaves, which suggests that this is related to the polar surface tension of leaves.     

Thermodynamics of adsorption of acetone on active carbon supported metal adsorbents

Adsorption of acetone on active carbon and active carbon supported metals (Ni, Cu, Zn and Cd) have been studied as a function of temperature. Thermodynamic parameters such as G ⁰, H ⁰, and S ⁰ are calculated from virial and Langmuir isotherm expressions. It is observed that active carbon supported metals have more adsorption affinity for acetone as compared to active carbon. Results show that the increase in adsorption affinity for active carbon supported metals is not due to configurational factors affecting the entropy of adsorption, but because of enhanced enthalpy of adsorption. XRD spectra show that active carbon supported metals adsorbents are amorphous and metal residues are present on the surface of active carbon in its reduced form. From adsorption data, isosteric heats and molar entropies of adsorption were calculated as a function of coverages and temperature. The values of isosteric heats of adsorption were found to be higher for active carbon supported metals, which may be due to the chemisorption of adsorbate molecules with metal sites present on the surface of active carbon. The extent of coordination of adsorbate molecules with metal sites is discussed on the basis of the acidic character of metal.     

Thermoplastic elastomers by hydrogen bonding 4. Influence of hydrogen bonding on the temperature dependence of the viscoelastic properties

The temperature dependence of the viscoelastic properties of thermoreversible polybutadiene networks based on hydrogen bond linkages is analyzed from the logarithmic shift factors loga _T . For binary hydrogen bond complexes thermorheologically simple behavior is observed. The temperature dependence of loga _T is described by the Williams-Landel-Ferry (WLF) equation. The thermoreversible linkages cause an increase in the apparent activation enthalpy of flow which is related to the number of complexing sites in the polymer. Thermorheologically complex behavior is observed in a system with more complex association.     

Determination of dispersive and nondispersive components of the surface free energy of glass fibers

The dispersive component _s ^d of the surface free energy of glass fibers and its interaction energy with alkanes, benzene, 1-nitropropane, ethyleneglycol, glycerol, formamide, and water were quantitatively determined by the tensiometric method within two liquids. The values of nondispersive interaction energy I _SL ^p were found to be a linear function of the square root of the nondispersive component of the surface free energy of liquids. This suggests that the nondispersive interaction energy may be represented by the geometric mean of the nondispersive component of the surface free energy of a solid and a liquid. The slope gave the nondispersive component _s ^p of the surface free energy. The _s ^p values are 33 and 14 mJ/m² for the untreated and aminosilane-treated fibers, respectively, suggesting that organophilic character has developed on the surface after aminosilane treatment. The _s ^p value was almost similar after the treatment, probably because of the polar characteristics of amino groups.     

Determination of the structure factor for concentrated silica dispersions using small angle x-ray scattering I. Simulation

The structure factor of a concentrated colloidal suspension is an important means in the characterization of the interaction forces between the colloidal particles. It can, in principle, be determined with small angle x-ray scattering. To avoid unacceptably long measuring times, one has to use a high power x-ray source or a slit collimation camera. The first is not readily accessible because of the very high costs. The latter is available in many laboratories, but here the fundamental information is contained in the data in a complicated way. A so-called desmearing operation is needed to reveal this information. Because of the different experimental errors and their sensitivity to the desmearing, the accuracy of the structure factor will be rather limited. In this paper we simulate the experimental errors separately to check their influence in combination with the desmearing.Although the overall accuracy is limited some important features can be determined. The value atK=0 and thus the osmotic compressibility can be calculated, and the position and the height of the first maximum in the structure factor are quite reliable too. This gives some insight in the type of interaction and the influence of polydispersity.Special attention should be given to the determination of the form factor by using extra long measuring times for the very diluted sample, this will improve the overall accurary.     

Determination of the structure factor for concentrated silica dispersions using small angle x-ray scattering. II. Experiment

The structure factor of a number of silica suspensions in cyclohexane, with concentrations ranging from 0.01 to 0.714 gcm^–3, has been determined with small angle x-ray scattering, using a Kratky camera. The experimental structure factor is compared with a theoretical one for which polydispersity effects on the particle scattering factor and on the structure are explicitly taken into account.Analysis of the scattered intensity at a scattering angle=0 shows that the particles in the suspension interact like hard spheres, with a specific hard sphere volume of 0.61 cm³g^–1. A comparison of the experimentally determined structure factor with the structure factor found by a model calculation for a polydisperse system, using the experimental particle size distribution, showed a general agreement. The height of the first maximum agreed well for all concentrations, however its position varied stronger with concentration in the experimental curves. A possible explanation of this effect is given.     

The effect of water on the zeta potential of chromium dioxide in tetrahydrofuran

Experiments have been performed to determine the effect of water on dilute suspensions of CrO₂ in tetrahydrofuran (THF). The effect of water in the solvent as well as on the particle surface has been investigated using electrokinetic and dispersion stability measurements. Results of these investigations have shown that the zeta potential of dried CrO₂ (physisorbed water removed) in THF is positive and is dependent on the water content in THF. The zeta potential exhibits a maximum at about 1,800 ppm water. Good correlation also exists between the electrokinetic and dispersion stability measurements.     

The modification of the triple helical structure of gelatin in aqueous solution I. The influence of anionic surfactants,pH-value,and temperature

The modification of the triple helical structure in aqueous gelatin solutions by changing pH and adding alkyl sulphates at 298 K and after rechilling the solution to 283 K was investigated by CD-measurement. At 298 K the triple helical content at the IEP of the gelatin has its maximum value. It is only weakly affected by adding sodium dodecyl sulphate (SDDS) at concentrations <10^–4 M/dm³. The unfolding of the triple helix affected by pH and SDDS is reversible by rechilling the solution. The triple helical content of gelatin solutions decreases at SDDS concentrations higher than 10^–4 M/dm³. In all cases the decrease of the amount of triple helical structure is connected with an increase of the cis-configuration in single chains and leads to chain reversals. At sufficiently high SDDS concentrations-sheets are formed. These changes are thermally irreversible. Sodium decyl sulphate (SDS) has a more minor influence than SDDS except in the range of the c.m.c. of SDS. At sufficiently high SDS concentrations,-turns appear.     

The thermorheological complexity of photoelastic behaviour of 2-hydroxyethyl methacrylate — dodecyl methacrylate copolymers

The viscoelastic photoelastic behaviour of networks of 2-hydroxyethyl methacrylate — dodecyl methacrylate (DMA) copolymers in the main transition and rubberlike region was investigated. With increasing DMA content, photoelastic functions are quickly shifted to lower temperatures or shorter times; a detailed course of the functions suggests heterogeneity of the copolymers. Due to the existence of long side chains, optical function of all samples change the sign from positive to negative with increasing temperature. While the temperature dependences of the moduli of copolymers can be described by the two-phase Takayanagi model, the temperature dependences of optical functions cannot be described by using this model. It has been found, however, that the tempeature and time dependences of photoelastic functions can be described semiquantitatively by a three-phase model with a hypothetical statistical copolymer as the third component. The high values of the volume fraction of the hypothetical statistical copolymer found for the individual samples, suggest a considerable miscibility and a strong influence of the interphase boundary on the photoelastic behaviour of the copolymers.     

The adsorption process of some acetic acid derivatives at the water/air interface

The adsorption of trifluoro-, trichloro-, tribromo-, and trimethylacetic acid at the water/air interface is discussed on the basis of surface tension measurements. The process of adsorption is described by Henry's and Langmuir's isotherm equations. The obtained results allow calculation of the standard free energy of adsorption of investigated molecules and the contribution to this energy of hydrophobic groups of these molecules.     

Small angle X-ray scattering study of an extremely elongated micelle system of CTAB-p-toluidine solution

Whenp-toluidine is added to an aqueous solution of CTAB, a remarkable increase of viscosity is accompanied by a spectacular elasticity. We detected the existence of extremely elongated rod-like micelles in electron micrographs. SAXS measurements indicate a closely packed array of cylindrical rod-like micelles, brought about when solutions flow through a thin capillary. A scattering maximum ofd=160 Å almost corresponds to the distance between the nearest neighbours of the cylindrical rod-like micelles. This value agrees with the diameter measured on electron micrographs. The second broad peak (d=75 Å) is assigned to a subsidiary maximum of the shape function of the cylinder with infinite length.     

Adsorption of quaternary ammonium chlorides with various hydrocarbon chain lengths to glass

Contact angles, measured with various liquids, have been employed to calculate the surface free energies of glass after adsorption of quaternary ammonium chlorides with a variable hydrocarbon chain length 8n16. The thickness of the adsorbed layers has been determined ellipsometrically. A clear relation is observed between the measured parameters and the hydrocarbon chain lengthn, if only the extremesn=8 andn=16 are considered. Surface free energies decrease from 138 erg.cm^–2 for clean glass to 101 and 64 erg.cm^–2 forn=8 andn=16, respectively, at the highest concentration tested (7.5 mM). The adsorbed layer thickness of C₈ amounts to approximately 50 % of the thickness observed for C₁₆. No clear relation between the measured parameters is observed for the intermediate hydrocarbon chain lengths, which presumably reflects the many configurations possible in these adsorbed layers. It is envisaged that adsorption of C₈ as well as C₁₆ is restricted to a monolayer, which is completed at approximately 2 mM. In the case of C₈ electrostatic repulsion between the polar headgroups will inhibit further adsorption, whereas in the case of C₁₆ the van der Waals attraction from the adsorbed layer and the glass will probably not be sufficient to stimulate further adsorption.     

Structure of casein micelles I. Small angle neutron scattering and light scattering fromβ- andχ-casein

Casein is the main protein component of milk and is of remarkable colloidal stability. Under the influence of milk clotting enzymes casein shows the striking behaviour of coagulation. This clotting process has already been studied by other groups, neglecting the fact that casein is not a homogeneous protein. The purpose of the present study is focused, in this first stage, on the determination of the structure of the various casein components. In cooperation with other laboratories we have been able to obtain the well separated individual proteins. Studies have been performed so far with- and-casein. For detailed structural information we carried out small angle neutron scattering and combined static and dynamic light scattering measurements and determined the molecular weight,M _w, the radius of gyration, S ² the hydrodynamic radius,R _H, the-value and the particle scattering factor, P_z(q). The two caseins show a strikingly different behaviour. For the-casein we found a star-like structure, i. e. an aggregation pattern that is expected for a common micelle. The micelle consists of about 38 monomer chains. The aggregates of-casein appear to be composed of star-like submicelles, where each submicelle contains nine-casein chains and the total degree of aggregation is about 140.     

Growth of polyethylene single crystals from the melt: change in lateral habit and regime I–II transition

Using the technique of extraction, single crystals have been obtained from polyethylene fractions isothermally crystallized from the melt at atmospheric pressure. It has been found that the lateral habit of single crystals changes in the vicinity of the transition temperature of growth regime (regime I–II): lenticular shape elongated in the direction of theb axis (type A) in the range of regime I and truncated lozenge with curved edges of {200} and {110} growth faces (type B) in that of regime II. The transition of lateral habit causes a drastic change in the width of {110} growth faces; {110} growth faces are well developed in type B crystals while they cannot be observed and must be very small in type-A crystals. It has been shown that the growth regime of the small {110} growth face of type-A crystals must be in regime I; hence the regime I–II transition can be explained as the result of this change in lateral habit (width of the {110} growth face).     

The effect of carrier solution on the particle size distribution of inorganic colloids measured by steric field-flow fractionation

The number average and the weight average particle diameters for suspended inorganic colloids found by the new technique of steric field-flow fractionation may be successfully used provided that the most suitable carrier solution is selected, in order to minimize the coagulation and adhesion phenomena.In the present work polydisperse, irregular colloidal particles of FePO₄·2H₂O (strengite) were studied. The average particle diameters were found to vary with the electrolyte concentration in the suspending medium. A strong variation of the number and weight average particle diameters was also observed with the quantity of the surfactant added to aquatic medium in order to increase colloidal stability. The influence of the electrokinetic charge of the FePO₄·2H₂O particles in relation to the surface charge of the material of the column employed, on the particle size measured was investigated. The proper carrier solution for minimizing coagulation and adhesion phenomena in the FePO₄·2H₂O colloidal particles was found to contain either 1.5% (v/v) detergent FL-70 and 0.1 MKNO₃ or 0.5% (v/v) detergent FL-70 and 0.033 MNa₂SO₄.     

Characteristic changes of pH during the alkalization of latex dispersions of the ethyl acrylate — methacrylic acid copolymers

The titration curves of latex dispersions of ethyl acrylate — methacrylic acid copolymers have a rather complex shape which indicates a strong dependence of the apparent dissociation constant of carboxylic groups on the degree of neutralization and copolymer composition. These dependences seem to be related to changes in the macroscopic structure (swelling and disintegration) of dispersion particles during alkalization.     

Dependence of the activity of a rhizopus lipase on microemulsion composition

Enzymatic hydrolysis of a model triglyceride, palm oil, was carried out with lipase fromRhizopus sp. in microemulsions with varying water content. The microemulsions were based on a nonionic surfactant, pentaethylene glycol monododecyl ether (C12 EO5), buffered water solution and an oil component consisting of isooctane and palm oil at a weight ratio of 20:1. The structure of the microemulsions was characterized using Fourier transform pulsed-gradient spin-echo¹H NMR. The rate of reaction decreased as the water content of the reaction medium was increased. The self-diffusion coefficient of water, D_w was found to be constant within the interval 1–20% water. The difference in reactivity is believed to be due to a difference in structure of the palisade layer between water and hydrocarbon microdomains. The nonionic surfactant was demonstrated to be unsuitable for enzymatic reactions since only partial hydrolysis was obtained in all experiments. The surfactant, however, did not cause enzyme deactivation, even at very high concentrations.