不同嵌段比的PEG-b-PDMAEMA共聚物在水溶液中的自聚集行为

采用氢核磁共振(¹H-NMR)、动态光散射(DLS)及透射电子显微镜(TEM)对聚乙二醇-嵌段-聚甲基丙烯酸N,N-二甲氨基乙酯(PEG-b-PDMAEMA)三种具有不同PEG/PDMAEMA嵌段比的PEG-b-PDMAEMA共聚物在水溶液中的自聚集行为进行了研究. 研究表明, 两嵌段比例是影响聚合物胶束化过程的关键因素: 只有当其中聚乙二醇含量较低(质量分数低于33%)时, 聚合物才具有其pH/温度敏感胶束化特性. 此外, 共聚物溶液随温度胶束化过程与共聚物嵌段比大小密切相关. PEG-b-PDMAEMA这种不同于传统双亲性嵌段共聚物(DHBCs)在选择性溶剂中独特的胶束化行为, 是由聚合物溶液体系中各种基团之间的氢键作用决定的.     

双重敏感mPEG-PDPA-P(AAm-co-AN)聚合物自组装体的药物递送

设计合成了一种新型两亲性三嵌段ABC聚合物聚乙二醇单甲醚-聚甲基丙烯酸二异丙胺基乙酯-聚(丙烯酰胺-co-丙烯腈)(mPEG-PDPA-P(AAm-co-AN))。该聚合物具有pH敏感嵌段PDPA和温度敏感嵌段P(AAm-co-AN)，临界溶解温度(UCST)较高，且可以通过改变单体比例来调节UCST。在室温、中性环境下，该聚合物通过自组装形成刺激响应型胶束，可用于抗肿瘤药物的控释研究。温度升高诱导聚合物胶束向不对称囊泡结构转变，pH降低促使聚合物形成更加松散的胶束。在体外释药探究中，聚合物胶束对亲水药物阿霉素(DOX)和疏水药物槲皮素都具有良好的载药效果，在37℃、pH=7.4的条件下泄漏量低，随着温度升高和pH降低，胶束释放药物的速率和释放量明显增加。     

原子转移自由基聚合制备聚甲基丙烯酸(N-羟基琥珀酰亚胺)酯及其嵌段共聚物

以CuCl/N-苄基-2-吡啶基甲亚胺(NBPM)/2-溴异丁酸乙酯(EBrIB)作为引发催化体系,使甲基丙烯酸(N-羟基琥珀酰亚胺)酯(MASI)进行ATRP聚合,得到的聚甲基丙烯酸(N-羟基琥珀酰亚胺)酯(PMASI)具有较高的单体转化率(90%)、较窄PDI(~1.10)和较高的分子量。在整个聚合过程中,较强的C—Cl键仍使聚合物的端基保持活性,有利于与第二单体甲基丙烯酸(N,N-二甲氨基)乙酯(DMAEMA)嵌段共聚形成结构明确的嵌段共聚物P(MASI-b-DMAEMA)。当MASI的链长较短时,P(DMAEMA40-b-MASI16)具有水溶性并可自组装成直径均匀的核-壳型微胶束,间接证明了聚合过程的可控特征。     

酶促聚合与ATRP结合合成聚己内酯和聚N,N-二甲氨基甲基丙烯酸乙酯嵌段共聚物及其自组装

摘要：用化学酶法合成聚己内酯（PCL）和聚N,N-二甲氨基甲基丙烯酸乙酯（PDMAEMA）双亲嵌段聚合物（PCL-b-PDMAEMA）。通过核磁共振（1H NMR）,红外光谱仪(FTIR-IR),凝胶渗透色谱(GPC) 对其结构以及分子量与其分子量分布情况进行了表征。对聚合物的溶液性质进行了研究,结果表明：临界胶束浓度（CMC）嵌段聚合物中疏水链段增多有利于形成胶束,表现为CMC降低,并具有较高的热力学稳定性。PDMAEMA是PH和温度敏感材料,研究发现,在不同的温度和pH值条件下表现不同的聚集状态, 当聚合物的pH值降低时平均流体力学直径增加,温度升高平均流体力学直径降低。     

嵌段共聚物PDMAEMA-b-PCL的合成、修饰及其水溶液性质研究

通过甲基丙烯酸N,N-二甲氨基乙酯(dimethylamino ethyl methacrylate)和环己内酯(ε-caprolactone)之间的连续阴离子聚合, 合成了末端含有氨基的聚甲基丙烯酸N,N-二甲氨基乙酯-嵌段-聚己内酯的双亲性嵌段共聚物(PDMAEMA-b-PCL). 为了增强生物相容性, 通过末端氨基与D-葡萄糖酸内酯(D-gluconolactone)的酰胺化反应对该共聚物进行糖基修饰. 合成的共聚物的化学结构用氢核磁共振光谱(¹H NMR)和红外光谱(IR)进行表征, 聚合物的分子量分布采用凝胶色谱(GPC)测定, 该嵌段共聚物在水溶液中的自组装行为则借助于动态光散射(DLS)进行了研究.     

化学酶法合成五嵌段聚合物及其自组装行为的研究

用酶促开环聚合与ATRP方法相结合,制备了聚甲基丙烯酸六氟丁酯-聚己内酯-聚乙二醇-聚己内酯-聚甲基丙烯酸六氟丁酯(PHFMA-b-PCL-b-PEG-b-PCL-b-PHFMA)五嵌段聚合物.首先用Novozym e 435作为催化剂合成了聚己内酯-聚乙二醇-聚己内酯三嵌段聚合物,然后通过端基官能化法合成了大分子引发剂,并用其引发甲基丙烯酸六氟丁酯(HFMA)的ATRP反应,合成了五嵌段聚合物.通过核磁和GPC证明了大分子引发剂和五嵌段共聚物的结构,五嵌段共聚物的GPC分析表明这种合成方法的可行.共聚物胶束的直径和大小通过动态光散射方法和原子力显微镜测试,五嵌段共聚物在水中的的自组装行为也被研究.结果证明胶束是球形,其平均直径为77 nm.聚合物在四氢呋喃中的浓度对聚合物的聚集形貌有很大的影响.     

pH敏感新型嵌段共聚物的合成及其对叶酸的运载与释放

采用可逆加成-断裂链转移(RAFT)法,成功合成了一种具有荧光性能的新型p H敏感两亲性嵌段共聚物聚(甲基丙烯酰氧喹啉-co-甲基丙烯酸-2-二甲氨基乙酯)-b-聚(甲基丙烯酸聚乙二醇酯)(P(MAQ-co-DMAEMA)-b-PMAPEG),用红外光谱(FT-IR)、核磁共振(1H NMR)、凝胶渗透色谱(GPC)对其结构进行表征.此共聚物在水溶液中可自组装形成胶束,由扫描电子显微镜(SEM)、动态光散射(DLS)、紫外光谱(UV)和荧光光谱(FL)对聚合物胶束溶液表征可知胶束为尺寸约80 nm的球形颗粒,且胶束溶液具有良好的荧光性.以叶酸(FA)为模型药物,研究载药胶束在模拟人体环境中的控释行为.结果表明:P(MAQ-co-DMAEMA)-b-PMAPEG可作为包载药物的一种新型纳米材料,载药胶束的体外释放呈明显p H依赖性,且具有较好的荧光性,该聚合物有望成为具有荧光性的理想药物载体.     

具有侧挂胆固醇液晶元的两亲嵌段功能大分子的合成及自组装研究

采用可逆加成-断裂链转移(RAFT)聚合法, 合成了系列具有刚性疏水胆固醇液晶元的聚甲基丙烯酸甘油酯-嵌段-聚甲基丙烯酸亚己基胆固醇酯(PGMA-b-PMA6Chol)两亲嵌段功能大分子. 运用核磁共振(NMR)和凝胶渗透色谱(GPC)表征了其化学结构及分子量, 并对其热性质、液晶相结构及相转变行为分别运用热台偏振光显微镜(POM)、热重分析仪(TGA)、示差扫描量热仪(DSC)和二维小角X射线散射(2D-SAXS)表征. 采用纳米沉淀法研究了所得嵌段大分子的溶液自组装, 动态光散射(DLS)和扫描电子显微镜(SEM)的研究发现溶液自组装聚集体为尺寸0.7～2.0 μm的球形结构, 其中含有较高刚性链段质量比例的嵌段大分子组装形成开口中空结构的聚集体, 且其尺寸随着溶液温度的升高减小, 呈现可逆温度变化响应性. 结果表明刚性疏水胆固醇液晶单元和具有多羟基结构的亲水性甲基丙烯酸甘油酯的嵌段共聚可以调控该类嵌段大分子自组装及溶液聚集体形貌.     

自组装制备聚(丙烯酸叔丁酯-b-甲基丙烯酸二甲胺基乙酯)壳交联胶束

以1-氯代乙苯为引发剂、氯化亚铜/N,N,N′,N″,N″-五甲基二乙撑三胺(PMDETA)为催化体系、丁酮-异丙醇为混合溶剂,通过原子转移自由基聚合法制备不同分子量的大分子引发剂聚丙烯酸叔丁酯(1-PECl)及不同嵌段比的两亲性嵌段共聚物聚(丙烯酸叔丁酯-b-甲基丙烯酸二甲胺基乙酯)(P(tBA-b-DMAEMA))。通过1H-NMR表征了P(tBA-b-DMAEMA)的结构,GPC测试了其分子量及分子量分布。P(tBA-b-DMAEMA)在选择性溶剂中自组装形成核-壳结构的胶束,引用了乙烯基乙二醇二碘醚(BIEE)为交联剂与链段PDMAEMA发生化学交联反应从而得到稳定的壳交联胶束结构,并通过马尔文粒径仪研究了自组装所得胶束的温度及pH敏感性。     

以二硫键连接的两嵌段共聚物的制备新方法

报道了一种制备二硫键连接的两嵌段共聚物的新方法.以可逆加成-断裂链转移自由基聚合(RAFT)制备聚苯乙烯大分子链转移剂(PS-RAFT),经伯胺还原得到巯基封端的PS(PS-SH).PS-SH与原子转移自由基聚合(ATRP)引发剂2-溴-2-甲基丙酸-2-(2-吡啶基二硫)乙酯发生交换反应,得到含有二硫键的聚苯乙烯大分子ATRP引发剂(PS-S-S-Br).以PS-S-S-Br引发甲基丙烯酸-2-羟基乙酯(HEMA)的ATRP聚合反应,合成了由二硫键连接的两嵌段共聚物PS-S-S-PHEMA.将PS-S-S-PHEMA可在甲醇中自组装形成以PS为核,PHEMA为壳的球形聚合物胶束,为制备新型含二硫键聚合物提供了新的合成方法.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.