Morphology and structural stability of Pt–Pd bimetallic nanoparticles

The morphologies and structures of Pt–Pd bimetallic nanoparticles determine their chemical and physical properties.Therefore, a fundamental understanding of their morphologies and structural stabilities is of crucial importance to their applications. In this article, we have performed Monte Carlo simulations to systematically explore the structural stability and structural features of Pt–Pd alloy nanoparticles. Different Pt/Pd ratios, and particle sizes and shapes were considered.The simulated results reveal that the truncated octahedron, which has the remarkably lowest energy among all the considered shapes, exhibits the best structural stability while the tetrahedron has the worst invariably. Furthermore, all the structures of Pt–Pd alloy nanoparticles present Pd-rich in the outmost layer but Pt-rich in the sub-outmost layer. Especially, atomic distribution and chemical short-range order parameter were applied to further characterize the structural features of Pt–Pd alloy nanoparticles. This study provides a significant insight not only into the structural stability of Pt–Pd alloy nanoparticles with different compositions, and particle sizes and shapes but also to the design of bimetallic nanoparticles.     

Au–Pt bimetallic nanoparticles supported on nest-like MnO2: synthesis and application in HCHO decomposition

Major research issues in oral protein delivery include the stabilization of protein in delivery devices which could increase its oral bioavailability. The study deals with development of oral insulin delivery system utilizing biodegradable poly(lactic-co-glycolic acid) (PLGA) nanoparticles and modifying its surface with Concanavalin A to increase lymphatic uptake. Surface-modified PLGA nanoparticles were characterized for conjugation efficiency of ligand, shape and surface morphology, particle size, zeta potential, polydispersity index, entrapment efficiency, and in vitro drug release. Stability of insulin in the developed formulation was confirmed by SDS-PAGE, and integrity of entrapped insulin was assessed using circular dichroism spectrum. Ex vivo study was performed on Wistar rats, which exhibited the higher intestinal uptake of Con A conjugated nanoparticles. In vivo study performed on streptozotocin-induced diabetic rats which indicate that a surface-modified nanoparticle reduces blood glucose level effectively within 4?h of its oral administration. In conclusion, the present work resulted in successful production of Con A NPs bearing insulin with sustained release profile, and better absorption and stability. The Con A NPs showed high insulin uptake, due to its relative high affinity for non-reducing carbohydrate residues i.e., fucose present on M cells and have the potential for oral insulin delivery in effective management of Type 1 diabetes condition.     

Effect of calcination temperature on the structure and performance of CeOx–MnOx/TiO2 nanoparticles for the catalytic combustion of chlorobenzene

Journal of Nanoparticle Research - Janus droplets with two opposite faces of different physical or chemical properties have great potentials in many fields. This paper reports a new method for...     

Effect of phosphorus and copper additions on the structure of Pt and Pt–Cu nanoparticles in a radiation-induced reduction method

A facile chemical process has been developed for the preparation of magnetic FeCo nanoparticles. The FeCo nanoparticles were mono-dispersed, obtained by the safe and ecofriendly method, possessed saturation magnetization up to 187 emu/g, and demonstrated excellent chemical stability. In this work, we have studied how to control Fe/Co ratio by variation of precursor ratio, and how to vary particle size from 9.3 to 12.3 nm by surfactant amount used. The cytotoxicity of as-synthesized nanoparticles was investigated after coating with the poly(methyl methacrylate-co-butyl acrylate) by the emulsion process and the results demonstrated high biocompatibility. Similarly, the same synthesis method was used with the single precursor FeO(OH) or Co₃O₄. The results showed that this method can also fabricate 10 nm mono-dispersed spherical Fe₃O₄ particles and self-assembly Co nanoneedles.     

Effect of alloying on the stabilities and catalytic properties of Pt–Au bimetallic subnanoclusters: a theoretical investigation

Density functional theory (DFT) has been applied to study the geometrical and electronic structures and the catalytic properties for NO oxidation of pure Pt and PtAu clusters. The calculated results suggest that Pt₁₀ clusters shows the most stable structure among the pure Pt _n (n = 2–13) clusters with the local maximum Δ₂ E value. The doping of Au atoms reduces the stability of the clusters, and Pt₆Au₄ cluster has the most stable structure among Pt_10?n Au _n (n = 1–7) clusters, due to the closest band centers between Pt and Au atoms (0.83 eV) and the obvious s–p resonance peaks near the Fermi level. Pt₆Au₄ cluster displays the strongest activation of O₂ molecules among Pt_10?n Au _n (n = 0–7) clusters, owing to the clear overlap between O 2p and Pt 6 s and Au 6 s near the Fermi level, and the more positive d band center than the others. The interaction between NO and metals changes slightly in NO/Pt_10-nAu_n (n = 2–7) systems, which is weaker than that in NO/Pt₉Au system, as a result of the decreasing resonance peaks of sp hybridization near the Fermi level. Compared to pure Pt₁₀ cluster, the lower energy barriers and larger reaction energies on Pt₆Au₄ cluster suggest a higher catalytic activity of PtAu cluster for the O₂ dissociation and NO oxidation reactions. Our study provides atomic-scale insights into the nature of the interfacial effect that determines NO oxidation on PtAu cluster catalysts.     

Synthesis,characterization, and electrochemical performance of nitrogen-modified Pt–Fe alloy nanoparticles supported on ordered mesoporous carbons

A method has been demonstrated to synthesize nitrogen-modified Pt–Fe alloyed nanoparticles (9.2–11.3 nm) supported on ordered mesoporous carbon (Pt _x Fe_100?x N/OMC), which is fabricated by a conventional wet chemical synthesis of Pt–Fe alloyed nanoparticles and followed by carbonization of the nanoparticles with tetraethylenepentamine as nitrogen chelating agent. Among these electrocatalysts, the Pt₃₀Fe₇₀N/OMC has highly catalytic activity for the oxygen reduction reaction (ORR) with significantly enhanced methanol tolerance as well. Combining the results from X-ray diffraction and X-ray absorption spectroscopy, it can be observed that Pt metal in the Pt₃₀Fe₇₀N/OMC is present in the outer shell of Pt–Fe alloys with face-centered cubic crystalline structure. By X-ray photoelectron spectroscopy, the nitrogen-modified Pt surface of Pt₃₀Fe₇₀N/OMC exhibits significant selectivity toward the ORR in the presence of methanol. This enhancement of methanol tolerance could be attributed to the inhibition of methanol adsorption resulting from the modification of the Pt surface with nitrogen.     

Exploring solid-phase approaches for the preparation of new β-lactams from amino acids

Two solid-phase approaches, involving the base-assisted intramolecular alkylation of N-chloroacetyl-Phe derivatives anchored to appropriate solid supports, were investigated for the preparation of novel beta-lactams. When a BAL-type strategy was used, the resin-bound azetidinones were easily formed, as established by MAS-NMR, but final compounds could not be removed from the resin, unless a suitable two linkers system was used. In the second approach, in which the Phe residue is anchored to a Wang-type resin through the carboxylate group, the corresponding 1,4,4-trisubstituted 2-azetidinone was obtained in moderate to good yield and high purity.     

Morphology and chemical state of PVP-protected Pt,Pt–Cu,and Pt–Ag nanoparticles prepared by alkaline polyol method

Well-dispersed, uniform monometallic Pt and bimetallic Pt–Cu, and Pt–Ag nanoparticles protected with PVP have been synthesized by a modified-protocol alkaline polyol method. The nanoparticles were characterized by various methods (TEM, XPS, and XRD) to elucidate the relationship between morphology and preparation variables. The average of monodispersed nanoparticles ranged between 4.1 and 4.9 nm. Core–shell structure was obtained in the case of bimetallic nanoparticles. The core of bimetallic nanoparticles was found to be rich in platinum, whereas the shell contained mostly copper or silver. The final structure of bimetallic nanoparticles was found to be determined by the morphology particles resulted in the first reduction step. Explanations are advanced on the light of experimental results.     

Properties of the Ce–Pd–Pt(111) overlayer system

The Pd–Pt(111) and the Ce–Pd–Pt(111) overlayer systems were studied by X-ray photoelectron spectroscopy and low-energy electron diffraction (LEED). Variations in the work function were measured by ultraviolet photoelectron spectroscopy. The Pd overlayer thicknesses were in the range of 1 to 4 monolayers (MLs). The Ce overlayer thicknesses were in the range is of 0.5 to 1.5 MLs. The interfaces were studied for annealing temperatures up to 700°C. Surface alloying or intermixing of Ce, Pd and Pt was observed. Upon deposition at ambient temperatures, Ce forms an overlayer. During annealing, both Pd and Ce were found to dissolve into the Pt substrate. For a Pd coverage of about 1 ML, the Ce–Pd–Pt(111) system was found to be Pt, terminated after annealing to 700°C. For Pd coverage above 1 ML, both Pd and Pt were found to be present at the surface. Cerium was found to be absent from the top surface layer in both cases.     

Mn–Zn ferrite nanoparticles for ferrofluid preparation: Study on thermal–magnetic properties

Mn_1−xZn_xFe₂O₄ (with x   varying from 0.1 to 0.5) ferrite nanoparticles used for ferrofluid preparation have been prepared by chemical co-precipitation method and characterized. Characterization techniques like elemental analysis by atomic absorption spectroscopy and spectrophotometry, thermal analysis using simultaneous TG-DTA, XRD, TEM, VSM and Mossbauer spectroscopy have been utilized. The final cation contents estimated agree with the initial degree of substitution. The Curie temperature (_Tc$T_{\mathrm{c}}$) and particle size decrease with the increase in zinc substitution. In the case of particles with higher zinc concentration, both ferrimagnetic nanoparticles and particles exhibiting superparamagnetic behavior at room temperature are present. In addition, some of the results obtained by slightly altering the preparation condition are also discussed. The precipitated particles were used for ferrofluid preparation. The fine particles were suitably dispersed in heptane using oleic acid as the surfactant. The volatile nature of the carrier chosen helps in altering the number concentration of the magnetic particles in a ferrofluid. Magnetic properties of the fine particles and ferrofluids are discussed. Ferrofluids having Mn_0.5Zn_0.5Fe₂O₄ particles can be used for the energy conversion application utilizing the magnetically induced convection for thermal dissipation.     

Synthesis and structures of Al–Ti nanoparticles by hydrogen plasma-metal reaction

Three kinds of Al–Ti nanoparticles (7.7, 27.8, and 42.6 at.% Ti) have been prepared from Al–65, Al–85, and Al–88 at.% Ti master alloys by hydrogen plasma-metal reaction, with average particle sizes of 30, 25, and 80 nm, respectively. The higher evaporation rate of Al than Ti resulted in the low Ti contents in the nanoparticles than those in the master alloys. Microscopy observation revealed that the primary nanoparticles are spherical in shape, and occur as chain aggregates of several individual nanoparticles due to the faster collision rate than the coalescence rate. All the Al–Ti nanoparticles contain amorphous alumina layers of about 2–3 nm in thickness surrounding the crystalline core. AlTi intermetallic nanoparticles were successfully produced for Al–27.8 at.% Ti, with a single crystal of AlTi in one chain aggregate. The composite nanoparticles of Al together with some Al₃Ti phases are prepared for Al–7.7 at.% Ti, with each phase in the individual particle of one chain aggregate. The composite nanoparticles of AlTi with some AlTi₃ were produced for Al–42.6 at.% Ti, with each phase in the individual particle of one chain aggregate. The formation mechanism of Al–Ti nanoparticles was interpreted in terms of phase transition and the effect of hydrogen.     

Ultrasound assisted co-precipitation of nanostructured CuO–ZnO–Al2O3 over HZSM-5: Effect of precursor and irradiation power on nanocatalyst properties and catalytic performance for direct syngas to DME

Nanostructured CuO–ZnO–Al₂O₃/HZSM-5 was synthesized from nitrate and acetate precursors using ultrasound assisted co-precipitation method under different irradiation powers. The CuO–ZnO–Al₂O₃/HZSM-5 nanocatalysts were characterized using XRD, FESEM, BET, FTIR and EDX Dot-mapping analyses. The results indicated precursor type and irradiation power have significant influences on phase structure, morphology, surface area and functional groups. It was observed that the acetate formulated CuO–ZnO–Al₂O₃/HZSM-5 nanocatalyst have smaller CuO crystals with better dispersion and stronger interaction between components in comparison to nitrate based nanocatalysts. Ultrasound assisted co-precipitation synthesis method resulted in nanocatalyst with more uniform morphology compared to conventional method and increasing irradiation power yields smaller particles with better dispersion and higher surface area. Additionally the crystallinity of CuO is lower at high irradiation powers leading to stronger interaction between metal oxides. The nanocatalysts performance were tested at 200–300 °C, 10–40 bar and space velocity of 18,000–36,000 cm³/g h with the inlet gas composition of H₂/CO = 2/1 in a stainless steel autoclave reactor. The acetate based nanocatalysts irradiated with higher levels of power exhibited better reactivity in terms of CO conversion and DME yield. While there is an optimal temperature for CO conversion and DME yield in direct synthesis of DME, CO conversion and DME yield both increase with the pressure increase. Furthermore ultrasound assisted co-precipitation method yields more stable CuO–ZnO–Al₂O₃/HZSM-5 nanocatalyst while conventional precipitated nanocatalyst lost their activity ca. 18% and 58% in terms of CO conversion and DME yield respectively in 24 h time on stream test.     

Synthesis and characterization of Pt–Sn–Ce/MC ternary catalysts for ethanol oxidation in membraneless fuel cells

The present work represents the mesoporous carbon-supported Pt–Sn and Pt–Sn–Ce catalysts with different mass ratios have been prepared by co-impregnation reduction method. The prepared catalysts were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM) investigation. The XRD patterns of prepared Pt/MC (100) Pt–Sn/MC (75:25), Pt–Ce/MC (75:25), and Pt–Sn–Ce/MC (75:20:05) catalysts showed that Pt metal was the predominant material in all the samples, with peaks attributed to the face-centered cubic (fcc) crystalline structures. Additionally changes in the lattice parameters observed for Pt suggest the incorporation of Sn into the Pt crystalling structure with the formation of an alloy mixture with the SnO₂ phase. The TEM analysis designates that the prepared catalysts had similar particle morphology, and their particle sizes were 2–5 nm. The electrochemical studies showed that ternary catalyst shows best performance for oxidation of ethanol molecule at normal temperature. The enhanced ethanol oxidation activity for the ternary Pt–Sn–Ce catalyst is mainly attributed to the synergistic effect of bifunctional mechanism with electronic effect. Additionally, chemical nature of ceria affords oxygen-containing molecule to oxidize acetaldehyde to acetic acid. In this present context, 1 M ethanol was used as a fuel, 0.1 M sodium perborate was used as an oxidant, and 0.5 M sulfuric acid was used as an electrolyte. In mesoporous carbon-supported binary Pt–Sn and ternary Pt–Sn–Ce anode catalysts were effectively tested in a single membraneless fuel cell at normal temperature. The presence of Sn and Ce enhances the CO oxidation; they produced an oxygen-containing species to oxidize acetaldehyde to acetic acid.     

Facile preparation and characterization of hollow poly(St-co-MMA-co-BA-co-MAA) core–double shell latex nanoparticles for electrophoretic displays

Novel core–double shell particles with poly(methyl methacrylate-co-butyl acrylate) (PMMA-co-BA) as the cores, poly(methyl methacrylate-co-butyl acrylate-co-methacrylic acid) (PMMA-co-BA-co-MAA) as the inner shells, poly(styrene-co-methyl methacrylate) (PS-co-MMA) as the outer shells were prepared by soap-free emulsion polymerization. The acid–alkali osmotic swelling processes were made before the outer shells wrapped for bigger aperture. The optimal experiment conditions were summarized. The morphology and size of the hollow latex particles were observed by transmission electron microscopy. The results showed that the uniform sizes of the hollow latex particles were about 230 nm. The electrophoretic mobility of them in tetrachloroethylene was 0.91 × 10⁻¹⁰ m² V⁻¹ s⁻¹, and the Zeta-potential was 5.87 mV. The results showed that the hollow polymer particles can used as background particles.     

Effect of Pt on interdiffusion and mechanical properties of the γ and γ′ phases in the Ni–Pt–Al system

The effect of Pt on the growth kinetics of the γ′-[Ni(Pt)]₃Al ordered intermetallic phase and the γ-Ni(Pt, Al) solid solution diffusion rates of the species, hardness and elastic modulus was examined by employing the diffusion couple experimental technique. Experiments were conducted by using the β-Ni(Pt)Al phase and Ni(Pt) alloy couples, each of which had a fixed amount of Pt (5, 10 and 15 at. %) in both the end members so that the Pt content is more or less constant throughout the interdiffusion zone. The results suggest that the growth kinetics of both phases and the average effective interdiffusion coefficients of Ni and Al increase with the increase in Pt content. Nanoindentation studies across the compositional gradients show that the mechanical properties of the intermetallic phase in the superalloy are relatively insensitive to the presence of Pt but are more sensitive to the Ni/Al ratio. In contrast, the marked variation in the hardness of the γ phase were noted, increasing markedly with Al concentration in a given couple and also increasing with increasing Pt content. Possible causes for the observed variations are discussed.     

Spontaneous ignition temperature for the compacted mixture of Ti–Al system: Theory and experimental comparisons

Spontaneous ignition of compacted mixture has been examined not only experimentally but also theoretically, relevant to materials synthesis by combustion for Ti–Al system. By varying compact and particle sizes, mixture ratio, and degree of dilution, spontaneous ignition temperature has been measured, which is determined from the inflection-point of the temporal variations of the surface temperature. It is found that the spontaneous ignition temperature decreases with increasing aspect ratio, defined as the ratio of the sample height and compact diameter, due to an establishment of the stationary temperature distribution in the radial direction in the compacted mixture, as the sample height becomes tall. It is also found that the spontaneous ignition temperature decreases with increasing size ratio, defined as the ratio of compact and particle diameters, due to an increase in the particle surface per unit spatial volume of the compacted mixture, caused by a decrease in the particle diameter and/or an increase in the compact diameter. By further examining its dependence on mixture ratio and/or degree of dilution, it is confirmed that the limit of flammability also exerts influences on the spontaneous ignition temperature. In addition, a fair degree of agreement, shown in experimental comparisons with theoretical results, indicates that the present formulation has captured the essential features of the spontaneous ignition of compacted mixture. Since this kind of particle size effect, especially, relevant to the spontaneous ignition of compacted mixtures, has not been captured in the previous studies, its elucidation can be considered not only notable but also useful, especially, in manipulating combustion process in materials synthesis.     

Gelatin–Chitosan composite capped gold nanoparticles: a matrix for the growth of hydroxyapatite

Growth of hydroxyapatite (HA) on gelatin–chitosan composite capped gold nanoparticles is presented for the first time by employing wet precipitation methods and we obtained good yields of HA. Fourier transform infrared spectroscopy (FTIR) spectrum has shown the characteristic bands of phosphate groups in the HA. Scanning electron microscopy (SEM) pictures have shown spherical nanoparticles with the size in the range of 70–250 nm, whereas ≥2–50 nm sized particles were visualized in high resolution transmission electron microscopy (HR-TEM). X-ray diffraction (XRD) spectrum has shown Bragg reflections which are comparable with the HA. Energy dispersive X-ray (EDX) studies have confirmed calcium/phosphate stoichiometric ratio of HA. The thermogravimetric analysis (TGA) has shown about 74% of inorganic crystals in the nanocomposite formed. These results have revealed that gelatin–chitosan capped gold nanoparticles, acted as a matrix for the growth of HA.     

Atomistic modeling of ternary additions to NiTi and quaternary additions to Ni–Ti–Pd,Ni–Ti–Pt and Ni–Ti–Hf shape memory alloys

The behavior of ternary and quaternary additions to NiTi shape memory alloys is investigated using a quantum approximate method for the energetics. Ternary additions X to NiTi and quaternary additions to Ni–Ti–Pd, Ni–Ti–Pt, and Ni–Ti–Hf alloys, for X=Au, Pt, Ir, Os, Re, W, Ta,Ag, Pd, Rh, Ru, Tc, Mo, Nb, Zr, Zn, Cu, Co, Fe, Mn, V, Sc, Si, Al and Mg are considered. Bulk properties such as lattice parameter, energy of formation, and bulk modulus of the B2 alloys are studied for variations due to the presence of one or two simultaneous additives.