带随机过程的随机规划问题最优解集的过程特性与稳定性

本文证明了带随机过程的随机规划问题最优解集做为集值随机过程的可测性、可测最优解选择过程的存在性。研究了最优解集过程的平稳性、马氏性以及最优值过程的鞅性和最优解集过程的集值鞅性。最后，讨论了在有限维分布意义下最优解集过程对所含随机过程参数的连续性以及最优值过程的稳定性。     

线性规划最优解集的表现

文献［１］讨论了有无穷多最优解的线性规划问题，并利用最优单纯形表格的检验数给出线性规划有无穷多最优解的判别法，本文利用最优基可行解的凸组合及最优极向的非负线性组合给出线性规划最优解集的表现，从而把线性规划最优解集的几何特征阐释清楚．     

一类二次规划问题的矩阵解法

本文给出二次规划问题的矩阵解法，经过规定的初等变换后，矩阵便同时展示出最优解判据、最优值及最优解集．     

基于GA的一类Fuzzy资源非线性规划问题的模型

本文建立了一类连续型Ｆｕｚｚｙ资源约束非线性规划问题的模型ＦＲＮＬＰ。基于ｆｕｚｚｙ最优解集和最优决策集，提出了求解ＦＲＮＬＰ模型的精确最优解和满意解的方法，最后研究并讨论了具有惩罚因子的ｆｕｚｚｙ资源约束非线性规划问题，并针对一个实例进行了分析。     

非线性参数规划问题$\varepsilon$-最优解集集值映射的连续性

对非线性参数规划问题$\varepsilon$-最优解集集值映射的连续性条件进行了研究.首先在可行集集值映射局部有界且正则的条件下,讨论了非线性参数规划问题最优值函数的连续性,然后针对$\varepsilon$-最优解集集值映射的结构特征并利用此结果和集值分析理论,给出了非线性参数规划问题$\varepsilon$-最优解集集值映射连续的一个充分条件.     

非线性参数规划问题ε-最优解集集值映射的连续性

对非线性参数规划问题ε-最优解集集值映射的连续性条件进行了研究.首先在可行集集值映射局部有界且正则的条件下,讨论了非线性参数规划问题最优值函数的连续性,然后针对ε-最优解集集值映射的结构特征并利用此结果和集值分析理论,给出了非线性参数规划问题ε-最优解集集值映射连续的一个充分条件.     

一类极大极小随机规划逼近问题最优解集的上半收敛性

本文首先将极大极小随机规划等价的转化为一个二层随机规划,在下层初始随机规划最优解集为多点集的情形下,给出下层随机规划逼近问题最优解集集值映射关于上层决策变量参数的上半收敛性和最优值函数的连续性.然后将上层随机规划等价转化为以上层和下层决策变量作为整体决策变量,以下层规划最优解集的图作为约束条件的单层规划,并在下层初始随机规划最优解集的图为正则的条件下,得到上层随机规划逼近问题最优解集关于最小信息概率度量收敛的上半收敛性.     

极大极小随机规划逼近问题最优解集和最优值的稳定性

研究了特殊的二层极大极小随机规划逼近收敛问题. 首先将下层初始随机规划最优解集拓展到非单点集情形, 且可行集正则的条件下, 讨论了下层随机规划逼近问题最优解集关于上层决策变量参数的上半收敛性和最优值函数的连续性. 然后把下层随机规划的epsilon-最优解向量函数反馈到上层随机规划的目标函数中, 得到了上层随机规划逼近问题的最优解集关于最小信息概率度量收敛的上半收敛性和最优值的连续性.     

带随机过程的随机规划问题——最优值过程与最优解集过程的鞅性

假设问题中所含随机过程为鞅，本文证明了带随机过程的随机规划问题共最优值过程与最优解集过程分别为实值上鞅与集值上鞅，且存在最优鞅通过程。     

线性分式规划最优解集的求法

本文使用多面集的表示定理 ,导出了线性分式规划最优解集的结构 ,并给出确定全部最优解的计算步骤 .     

Optimal control and optimal trajectories of regional macroeconomic dynamics based on the Pontryagin maximum principle

The Pontryagin maximum principle is used to prove a theorem concerning optimal control in regional macroeconomics. A boundary value problem for optimal trajectories of the state and adjoint variables is formulated, and optimal curves are analyzed. An algorithm is proposed for solving the boundary value problem of optimal control. The performance of the algorithm is demonstrated by computing an optimal control and the corresponding optimal trajectories.     

关于运输问题最优解的进一步讨论

首先给出了运输问题最优解的相关概念,将最优解扩展到广义范畴,提出狭义多重最优解和广义多重最优解的概念及其区别.然后给出了惟一最优解、多重最优解、广义有限多重最优解、广义无限多重最优解的判定定理及其证明过程.最后推导出了狭义有限多重最优解个数下限和广义有限多重最优解个数上限的计算公式,并举例验证了结论的正确性.     

冲裁件有约束最优剪切方式的设计

本文讨论冲裁件有约束最优剪切方式的设计问题 .阐明最优剪切排样方式的规范结构 ;采用分支定界法求解冲裁件无约束排样问题 ;将有约束排样问题转换为求解一系列的无约束排样问题 ,并通过对解的性质分析提高算法效率 .实验计算结果说明本文算法十分有效 .最后给出一例题的最优排样方式 .     

Enumeration of All Possibly Optimal Vertices with Possible Optimality Degrees in Linear Programming Problems with a Possibilistic Objective Function

In this paper, we treat linear programming problems with fuzzy objective function coefficients. To such a problem, the possibly optimal solution set is defined as a fuzzy set. It is shown that any possibly optimal solution can be represented by a convex combination of possibly optimal vertices. A method to enumerate all possibly optimal vertices with their membership degrees is developed. It is shown that, given a possibly optimal extreme point with a higher membership degree, the membership degree of an adjacent extreme point is calculated by solving a linear programming problem and that all possibly optimal vertices are enumerated sequentially by tracing adjacent possibly optimal extreme points from a possibly optimal extreme point with the highest membership degree.     

A numerical method for an optimal control problem with minimum sensitivity on coefficient variation

In this paper, we consider a class of optimal control problem involving an impulsive systems in which some of its coefficients are subject to variation. We formulate this optimal control problem as a two-stage optimal control problem. We first formulate the optimal impulsive control problem with all its coefficients assigned to their nominal values. This becomes a standard optimal impulsive control problem and it can be solved by many existing optimal control computational techniques, such as the control parameterizations technique used in conjunction with the time scaling transform. The optimal control software package, MISER 3.3, is applicable. Then, we formulate the second optimal impulsive control problem, where the sensitivity of the variation of coefficients is minimized subject to an additional constraint indicating the allowable reduction in the optimal cost. The gradient formulae of the cost functional for the second optimal control problem are obtained. On this basis, a gradient-based computational method is established, and the optimal control software, MISER 3.3, can be applied. For illustration, two numerical examples are solved by using the proposed method.     

基于腐损程度的季节性产品动态定价与订单量的集成优化

为了对易腐季节性产品的销售价格和订单量进行最优决策,考虑产品在不同腐损程度的情形下,需求与价格和时间同时相关的一类季节性产品的动态定价和订单量的集成优化问题.建立该类产品的价格制订次数、每次制订的价格和订单量的集成优化模型,并对模型进行求解,最后结合数例验证模型的实用性和可操作性,并分析产品腐损程度对价格制订次数、价格大小、订单量和利润的影响.结果表明,随着产品腐损程度的提高,零售商在销售季节内的产品价格最优制订次数保持不变;零售商在销售季节内所制订的最优价格逐渐微降;产品的最优订单量和所产生的最优利润逐渐微升.     

Sensitivity analysis of the optimal assignment

This paper concentrates on sensitivity analysis of the optimal solution for the assignment problem (AP). Due to the high degeneracy of the AP, traditional sensitivity analysis, which determines the range in which the current optimal basis remains optimal, is impractical. Thus, changing the optimal basis does not ensure that the optimal assignment will be changed. Herein we investigate the properties of the AP and then propose several lemmas to determine two other types of sensitivity range. The first type is used to determine the range in which the current optimal assignment remains optimal. We further discuss what is the new optimal assignment when the changes surpass the range. The second type of sensitivity range is to determine those values of assignment model parameters for which the rate of change of optimal value function remains constant. An example is presented in order to demonstrate that the approaches are useful in practice.     

OPTIMAL HARVESTING WITH DENSITY DEPENDENT RANDOM EFFECTS

We consider the effect of sudden large, randomly occurring density dependent disasters on the optimal harvest policy and optimal expected return for an exploited population. The population is assumed to grow logistically with disasters occurring on a time scale very short compared to the natural growth scale. The case of a density dependent disaster frequency is also treated. Stochastic dynamic programming is used in the optimization. For a set of realistic field data it is found that random effects typically have a significant effect on both optimal return and optimal effort levels. The effect of density dependence is far more pronounced for optimal return than for optimal effort levels.     

Nonlinear optimal feedback control for lunar module soft landing

In this paper, the task of achieving the soft landing of a lunar module such that the fuel consumption and the flight time are minimized is formulated as an optimal control problem. The motion of the lunar module is described in a three dimensional coordinate system. We obtain the form of the optimal closed loop control law, where a feedback gain matrix is involved. It is then shown that this feedback gain matrix satisfies a Riccati-like matrix differential equation. The optimal control problem is first solved as an open loop optimal control problem by using a time scaling transform and the control parameterization method. Then, by virtue of the relationship between the optimal open loop control and the optimal closed loop control along the optimal trajectory, we present a practical method to calculate an approximate optimal feedback gain matrix, without having to solve an optimal control problem involving the complex Riccati-like matrix differential equation coupled with the original system dynamics. Simulation results show that the proposed approach is highly effective.     

Revisit of Linear-Quadratic Optimal Control

The classical finite-dimensional linear-quadratic optimal control problem is revisited. A new linear-quadratic control problem with linear state penalty terms but without quadratic state penalty terms, is introduced. An optimal control exists and the closed-form optimal solution is given. It is remarkable that feedback action plays no role and state information does not feature in the optimal control. The optimal cost function, rather than being quadratic, is linear in the initial state.