NAMI-A乙基取代衍生物水解机理的DFT研究

采用密度泛函理论(DFT)方法,并结合导体极化连续模型(CPCM)研究了[(N-EtIm)H][trans-RuⅢCl4(DMSO)(N-EtIm)](N-EtIm=N-乙基咪唑)分别在中性及酸性条件下的水解反应过程.同时,为提高溶剂化能的精确度,在中性条件下水解反应的计算中采用3个水分子的溶剂化模型.计算得到水解反应过程中相应的结构特征和详细的热力学能量及速率常数.首先,在中性条件下,对于第一步水解,液相中配合物的活化能垒为109.9kJ/mol,速率常数为3.3×10-7 s-1,与实验中测得的第一步水解反应的速率常数(4.4×10-7 s-1)一致.对于第二步水解,反应的活化能垒为117.9kJ/mol,这符合实验中观察到的第二步水解比第一步水解反应慢的现象.其次,计算结果表明,酸性条件下,DMSO基团易于水解,Cl-水解困难,这也与实验结果相吻合.     

毛细管电泳用于瑞香苷水解常数的研究

采用毛细管电泳-紫外检测法对瑞香苷进行了水解动力学研究.瑞香素是瑞香苷的水解产物.考察了瑞香苷(DN)和瑞香素(DP)的紫外吸收随水解反应过程的进行而发生的变化,计算得水解的速率常数,并总结了酸度和温度对速率常数的影响规律.当盐酸浓度为1.0 mol/L,温度为333、347、351、363、371 K时的水解常数分别为1.1×10-3、4.6×10-3、6.6×10-3、17.3×10-3、33.5×10-3min-1.同时,根据阿仑尼乌斯公式计算该反应的活化能为91.62 kJ/mol.此法用于测定瑞香苷水解常数简便、直观.     

5-氟胞嘧啶气相及水助质子转移异构化的理论研究

采用密度泛函B3LYP/6-311G**方法,对6种5-氟胞嘧啶异构体孤立分子的稳定性及质子转移引起的酮式-烯醇式、氨基式-亚胺式互变异构反应机理进行了计算研究,获得了零点能、吉布斯自由能及质子转移过程的反应焓、活化能、活化吉布斯自由能和速率常数等参数.计算结果表明,气相中烯醇-氨基式FC4是最稳定的异构体.分子内质子转移设计了FC1→FC2和FC1→FC6两条通道,分别标记为P(1)和P(2),各通道速控步骤的活化能和速率常数分别为155.9 kJ·mol-1,4.70×10-15 s-1和173.1 kJ·mol-1,1.41×10-18 s-1.水助催化时,相应通道P(3) 和P(4) 速控步骤的活化能和速率常数分别为51.0 kJ·mol-1,1.41×103 s-1和88.2 kJ·mol-1,4.53×10-3 s-1.可见,水分子的加入极大地降低了质子转移的活化能垒.另外发现,水分子参与形成协同的双质子转移机理比水助单质子转移机理更利于降低活化能垒.     

2-(1,3,4-三氮唑偶氮)-5-二乙氨基苯甲酸-过氧化氢催化动力学光度法测定痕量铁(Ⅲ)

本文研究了铁(Ⅲ)催化H2O2氧化2-(1,3,4-三氮唑偶氮)-5-二乙氨基苯甲酸(TZDBA)的褪色反应及其动力学条件,建立了测定痕量铁(Ⅲ)的催化动力学光度法.在pH=4.0的HAc-NaAc缓冲溶液中,褪色体系的最大吸收波长488 nm,催化反应的表现活化能Ea=42.10 kJ/mol,速率常数k=8.57×...     

负载双核茂金属催化剂催化乙烯聚合反应动力学研究

以SiO2为载体,制备了负载的双核茂金属[（η5-C5H5）Zr Cl2]2[μ,μ-（SiMe2）2（η5-allyl C5H2）2]/MAO/SiO2催化剂,以己烷为溶剂进行了淤浆条件下乙烯聚合反应,研究了扩散因素、乙烯聚合压力和聚合温度对乙烯淤浆聚合动力学参数的影响,测定了聚合反应级数和表观活化能,采用动力学和相对分子质量法计算了负载催化剂的活性中心浓度,并对链增长速率常数等动力学参数进行了计算.结果表明,以负载双核茂金属催化剂催化乙烯淤浆聚合反应速率对单体浓度呈1.11级依赖,反应活化能Ea为72.47 kJ/mol,活性中心浓度C＊为0.33 mol/mol,链增长速率常数Kp为1.06×106L.（mol.h）-1.     

2,4-二硝基氯苯碱性水解胶团催化的活化能

研究了阳离子表面活性剂氯化十六烷基吡啶(CPC)和十六烷基三甲基氯化铵(CTAC)胶团对2,4-二硝基氯苯(DNCB)碱性水解的催化作用和小分子极性有机物丁醇的加入对该反应的影响,计算了反应活化能.结果表明:(1)CPC和CTAC胶团对DNCB碱性水解都有明显的催化作用;(2)加入少量叔丁醇略有利于提高催化效果;(3)在CPC和CTAC胶团溶液中DNCB碱性水解反应的活化能约为49kJ/mol,比纯水中的91kJ/mol低得多,说明反应机制可能存在差异.     

DH-2树脂对镝的吸附及机理

研究了镝离子在HD-2树脂上的吸附行为。在HAc-NaAc体系pH=6.20时吸附最佳,测得静态饱和吸附容量为356mg/g(树脂),用0.1~2.0 mol/L HC l可定量洗脱,表观速率常数k198=1.16×105s-1,表观活化能Ea=16.1kJ/mol。等温吸附服从Freun ilich经验式,吸附热力学参数△H=16.5kJ/mol,△S=58.2 J/(mol.K),△G298=-0.859kJ/mol。用化学和红外光谱等方法讨论了吸附机理。     

毛细管电泳法测定乙醇酸二聚物的水解反应速率常数

利用毛细管电泳-紫外吸收法测定乙醇酸二聚物及其水解产物乙醇酸的浓度随时间变化的规律,建立新的数学模型,将水解反应转化率与乙醇酸二聚物及乙醇酸峰面积直接关联,进而计算乙醇酸二聚物在50 mmol·L~(-1)磷酸盐缓冲溶液中,不同温度时的水解反应速率常数。在343,353,363 K时,乙醇酸二聚物的水解反应速率常数分别为4.8×10~(-3),9.6×10~(-3),1.85×10~(-2)min~(-1)。根据阿仑尼乌斯公式计算得该反应的表观活化能为69.8 kJ·mol~(-1)。     

硅氮烷添加剂的水解稳定性对硅橡胶热稳定性的影响

采用一种新的方法研究了硅氮烷水解反应的动力学规律 ,根据实验数据测出硅氮烷水解速率对硅氮烷的浓度符合一级动力学关系 .计算出了几种硅氮化合物与水蒸气反应的表观活化能 ,结果表明硅氮烷的结构与其水解反应的表观活化能有密切的关系 .硅原子或氮原子上带有较大空间位阻的基团后 ,其水解稳定性提高 .其中六苯基环三硅氮烷 4的水解表观活化能为 2 14kJ mol,而苯基硅氮聚合物 5的水解表观活化能更达到 2 91 3kJ mol.添加到硅橡胶中的硅氮化合物水解表观活化能越大 ,即水解稳定性越高 ,其改进硅橡胶热稳定性的效果越好 .将 4和 5添加到硅橡胶生胶中 ,35 0℃下老化 2 4h的热失重分别为 0 96 %和 0 6 % .     

大环三胺1,4,7-三氮杂环癸烷锌(Ⅱ)配合物催化水解作用研究

在25℃、离子强度I=0.10(KNO3)条件下,采用pH电位滴定法测定了大环三胺配体1,4,7-三氮杂环癸烷(TACD)与Zn(Ⅱ)离子的配位平衡常数,讨论了配体与金属离子的配位情况.利用分光光度法,在pH=7～9范围内[2×10-4mol.L-1三羟甲基氨基甲烷(tris)为缓冲溶液]研究了配合物在对硝基苯酚乙酸酯(NA)水解中的催化动力学行为,得到了NA酯的水解速率常数kcat.结果表明,催化水解速率对底物(NA)及配合物浓度均呈一级反应,水解反应遵循速率方程v=(kcat.cZn2++kOH-.cOH-+…).在中性和弱碱性条件下,配合物对NA酯的水解具有很好的催化作用,当pH=9.19时,催化速率常数达3.420×10-2mol-1.L.s-1;催化反应受酸碱平衡控制.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.