基于纳米铂黑修饰的快速检测用乳酸生物传感器研究

制备了一种可用于运动员血清样品乳酸快速检测的L-乳酸传感器.这种便携式平面电化学生物传感器采用金薄膜两电极系统;先后修饰纳米铂黑粒子层和铁氰化钾媒介体.铂黑纳米粒子沉积于金电极表面以提高传感器的灵敏度和稳定性,然后将乳酸氧化酶(LOD, E.C.1.1.3.2)和相关试剂固定在工作电极表面,铁氰化钾作为媒介体用以提高电极表面电子传递能力,并将工作电压降低为0.2 V.通过优化铂黑颗粒的沉积、乳酸氧化酶的浓度、铁氰化钾的浓度、添加剂的成分和浓度等条件,将传感器的检测范围扩展至1～20 mmol/L乳酸,检测灵敏度提高到1.43 μA·L/mmol,检测时间为50 s.生物传感器的批间r为0.0549;生物传感器经室温储存1年后仍可保持90%的活性.这种传感器成功地用于无稀释乳酸血清样品的快速检测,结合便携式检测仪(YT 2005-1 乳酸测试仪)将在快速诊断领域具有很好的应用前景.     

纳米铂颗粒修饰薄膜金电极的新型葡萄糖传感器研究

在没有引入电子媒介体条件下,为了提高传感器的响应灵敏度,降低工作电位,利用电化学沉积法在薄膜金电极表面修饰纳米铂颗粒,并通过戊二醛固定酶的方法制备了一种新型生物传感器。研究了在薄膜金电极上修饰纳米铂颗粒前后传感器对低浓度葡萄糖的响应影响。结果表明,纳米铂颗粒修饰后所制备的葡萄糖传感器工作电位下降为0.4 V,测定葡萄糖的检出限从100μmol/L下降到10μmol/L。传感器对10~1300μmol/L低浓度葡萄糖的响应灵敏度为50.8 nA/(cm2μmol/L);响应时间30 s;r为0.9974;传感器精密度为2.1%,并具有较好的稳定性。     

纸基葡萄糖电化学生物传感器的研究及应用

基于纳米金的自催化无电沉积镀金技术,采用混合纤维素滤膜作为模板,制备了一种纳米多孔纸基薄膜金电极。以该金滤膜电极作为基底电极,使用Nafion溶液分散的碳纳米管-纳米铂(PtNPs)复合材料作为载体,实现了葡萄糖氧化酶(GOD)的直接电化学,并建立了一种低成本的纸基葡萄糖电化学传感器。该传感器对葡萄糖具有良好的安培响应,葡萄糖浓度在5.0×10-6~2.5×10-3 mol/L范围与其0.55V处的氧化电流呈良好的线性关系(R=0.999),检测限(S/N=3)为1.0×10-6 mol/L。制备了8支传感器,对25μmol/L葡萄糖进行检测,结果的相对标准偏差为6.03%,表明该传感器具有较好的重现性。     

壳聚糖-纳米金-葡萄糖氧化酶生物传感器的制备及其应用于葡萄糖的测定

采用了一种简便快捷的电沉积方法制备了壳聚糖-纳米金复合膜并应用于葡萄糖生物传感器的构建.氯金酸和壳聚糖的混合液在玻碳电极表面电化学还原为金纳米粒子,再将葡萄糖氧化酶通过戊二醛交联的方式固定在纳米金复合膜修饰的玻碳电极表面,制成一种新型的葡萄糖氧化酶生物传感器.该传感器对葡萄糖的响应十分快速,在5 S内即达到平衡.测定葡萄糖的线性范围为20μmol·L-1～5 mmol·L-1,检出限(3S/N)为12μmol·L-1.     

基于表面重建螺旋型铂铱电极的葡萄糖生物传感器

通过对螺旋型铂铱电极表面进行化学腐蚀和电化学沉积铂纳米粒子实现电极表面的重建和优化,研究了螺旋型铂铱电极在不同腐蚀时间和电沉积时间下的形貌及对过氧化氢(H2O2)的催化活性.对表面重建的工作电极涂覆氧化酶和半透膜,制备出了铂纳米粒子/葡萄糖氧化酶/环氧聚氨酯酶电极,并将其用作葡萄糖传感器的工作电极.传感器计时电流检测结果表明,表面重建后的酶电极传感器对葡萄糖的检测范围扩大为2~45 mmol/L,优于裸铂铱酶电极传感器,电流响应值和灵敏度得到明显提升,同时传感器还具有良好的稳定性和选择性.     

利用层层累积技术制备基于纳米碳管的葡萄糖生物传感器

以多壁纳米碳管(MWNTS)为电子媒介体和酶的吸附载体,利用层层累积的自组装技术固定葡萄糖氧化酶(GOX)的多层(MWNTa/GOx).复合薄膜修饰电极,制备了一种新型葡萄糖生物传感器.结果表明,传感器对葡萄糖的响应电流值随着MWNTa//GOx复合薄膜层数的不同而变化,当MWNTa//GOx复合薄膜的层教为6时,响应电流值迭到最大.(MWNTs/GOx).复合薄膜修饰的葡萄糖生物传感器对30mmol/L葡萄糖的响应电流为1.63μA,响应时间仅为6.7 s.该生物传感器检测的线性范围为0.5～15 mmol/L,最低检测浓度可达0.09 mmol/L.     

纳米铂修饰电极用于提高葡萄糖传感器性能的研究

纳米材料领域的快速发展,促进了无酶葡萄糖电化学传感器的研制热潮的兴起。本论文采用计时电流沉积的方式制备了铂纳米花修饰电极,用于改善葡萄糖电化学传感器的性能,同时考察了沉积电位,沉积时间以及电解液的种类对修饰电极性能的影响。研究结果表明,在以氯铂酸(3.0mmol·L~(-1))和硫酸(0.5mol·L~(-1))为电解液,-0.2V的沉积电位,沉积900s时,可以得到葡萄糖氧化峰明显,电化学性能较好的纳米铂修饰电极,所构建的葡萄糖传感器具有较好的稳定性和重现性。     

自组装分子印迹单层膜修饰电极对L-丝氨酸的检测

以电沉积多孔金膜为基底,L-丝氨酸为模板分子,L-半胱氨酸为功能单体构建了信号放大的自组装分子印迹单层膜修饰电极.电极对L-丝氨酸浓度响应的线性范围为5.0×10-6～2.0×10-4 mol/L,检出限为4.8×10-7 mol/L,灵敏度为215 mA·L·mol-1.由于多孔金膜有效增加了模板分子的固定量,印迹电极响应性能较无多孔金膜修饰的印迹电极有明显提高.     

金纳米粒子和钼氧化物复合膜修饰电极的制备及应用

利用循环伏安法将金纳米粒子和钼氧化物共同电沉积在玻碳电极表面,制备了金纳米粒子和钼氧化物复合膜修饰电极,利用SEM和XPS研究了MoOx/AuNPs复合膜的表面形态,并研究其修饰电极对葡萄糖的电催化氧化过程. 首次提出了阳极扫描极化反向催化伏安法,即在反向扫描过程中纯的催化氧化电流通过扣减背景电流的方法被提取出来. 显著提高电流测量灵敏度改善了信噪比. 制备的MoOx/AuNPs复合膜修饰电极在0.01-4.0 mmol/L对葡萄糖具有线性响应,电流灵敏度为2.35 mA·L/（mmol·cm2）,检测限为9.01 μmol/L（信噪比为3）.     

交联镍纳米片修饰电极用于无酶葡萄糖传感器

以滴涂法在玻碳电极表面修饰一层阳离子交换聚合物Nafion膜,通过离子交换将Ni2+固定于电极表面,进一步电化学沉积得到相互交联的Ni纳米片。Ni纳米片修饰电极能催化葡萄糖的电化学氧化,可用于无酶葡萄糖传感器的构建。在0.60 V恒电位条件下,Ni纳米片修饰电极的氧化峰电流随葡萄糖浓度的增大而增大,其线性响应浓度范围为0.02~3.85 mmol/L。传感器的检测灵敏度为150.6μA(mmol/L)-1·cm-2,检出限为5μmol/L,响应时间为5 s。传感器应用于葡萄糖注射液的检测,加标回收率为90.0%。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.