Residual strength of GFRP at high-cycle fatigue

Degradation of the residual strength of a glass-fiber-reinforced polyester composite of a lay-up typical of the wind rotor blade material is studied at low-cycle fatigue. A gradual reduction of the residual strength is observed as expected for GRP, accompanied by an increasing scatter of strength. The residual strength model based on the strength-life equal rank assumption yields an accurate approximation of experimental data. The strength reduction at a stress level corresponding to high-cycle fatigue (N>10 ⁶ cycles) appears to correlate well with the test results at higher stress levels, which indicates that the strength degradation at the design stress level can be evaluated using low-cycle tests. Assuming that the parameters of the strength degradation model do not depend on the applied stress level, the residual strength data obtained in low stress level tests of comparatively short duration can be used to estimate the average fatigue life at the same stress thus reducing the total test time. Translated from Mekhanika Kompozitnykh Materialov, Vol. 35, No. 5, pp. 595–604, September–October, 1999.     

Markov model for analyzing the residual static strength of a fiber-reinforced composite

The possibility of using a unified mathematical model, based on the theory of Markov chains, to describe the distribution of the conditional fatigue limit at a fixed number of loading cycles and the residual strength of a specimen after cyclic loading is demonstrated. Numerical examples are presented. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 44, No. 4, pp. 559–568, July–August, 2008.     

Markov model of connection between the distribution of static strength and fatigue life of a fibrous composite

Within the framework of a unified mathematical model based on the Markov chain theory, an attempt is made to describe the distribution of static strength, the fatigue curve, and the accumulation of fatigue damages. It is assumed that the fatigue failure of a test specimen occurs after the destruction of some its critical microvolume consisting of two — elastic (brittle fibers) and plastic (matrix) — parts. In the second part, plastic strains accumulate as soon as the cyclic load exceeds some level. Numerical examples are presented. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 42, No. 5, pp. 615–630, September–October, 2006.     

Limiting behaviour of the mean residual life

In survival or reliability studies, the mean residual life or life expectancy is an important characteristic of the model. Here, we study the limiting behaviour of the mean residual life, and derive an asymptotic expansion which can be used to obtain a good approximation for large values of the time variable. The asymptotic expansion is valid for a quite general class of failure rate distributions—perhaps the largest class that can be expected given that the terms depend only on the failure rate and its derivatives.     

An asset residual life prediction model based on expert judgments

An appropriate and accurate residual life prediction for an asset is essential for cost effective and timely maintenance planning and scheduling. The paper reports the use of expert judgments as the additional information to predict a regularly monitored asset’s residual life. The expert judgment is made on the basis of measured condition monitoring parameters, and is treated as a random variable, which may be described by a probability distribution due to the uncertainty involved. Since most expert judgments are in the form of a set of integer numbers, we can either directly use a discrete distribution or use a continuous distribution after some transformation. A key concept used in this paper is condition residual life where the residual life at the point of checking is conditional on, among others, the past expert judgments made on the same asset to date. Stochastic filtering theory is used to predict the residual life given available expert judgments. Artificial, simulated and real data are used for validating and testing the model developed.     

A note on estimation of the mean residual life function with left-truncated and right-censored data

This note focuses on estimating the mean residual life function with left-truncated and right-censored data. We show that the proposed estimator converges weakly to a Gaussian process. The performances of the estimator and its pointwise confidence intervals are illustrated through simulation studies.     

Mean residual life and increasing convex comparison of shock models

Two devices are subjected to shocks arriving according to a general counting process. Let M₁ and M₂ be the random number of shocks that cause the failure of the first and the second device, respectively. We find conditions on the counting process such that the mean residual life ordering, the increasing convex ordering and the expectation ordering between M₁ and M₂ are preserved in the random lifetimes of the two devices.     

Reduction in mean residual life in the presence of a constant competing risk

The addition of a constant ‘competing risk’ corresponding to an additional, usually less significant, source of failure, frequently improves the fit in reliability and survival analysis. This is often termed a ‘lift’, as the effect is to increase the hazard rate (HR) function by a constant, which does not, of course, change the shape and hence the turning points of the HR function. However, lifting the HR function does not, in general, mean lowering the corresponding mean residual life (MRL) function by a constant, and so the MRL turning points, unlike those of the HR function are not invariant. The MRL turning points are used in, for example, defining burn‐in procedures in reliability engineering, and determining premiums in insurance. Hence, it is of interest to examine the changes in the shape of the MRL function, and in the locations of its turning points, resulting from a lift in the HR function. We discuss these problems in detail, with reference to a number of common distributions in reliability and mortality modeling. Copyright © 2007 John Wiley & Sons, Ltd.     

A model to predict the residual life of rolling element bearings given monitored condition information to date

In condition monitoring practice, one of the primary concernsof maintenance managers is how long the item monitored can survivegiven condition information obtained to date. This relates tothe concept of the condition residual time where the survivaltime is not only dependent upon the age of the item monitored,but also upon the condition information obtained. Once sucha probability density function of the condition residual timeis available, a consequencial decision model can be readilyestablished to recommend a ‘best’ maintenance policybased upon all information available to date. This paper reportson a study using the monitored vibration signals to predictthe residual life of a set of rolling element bearings on thebasis of a chosen distribution. A set of complete life dataof six identical bearings along with the history of their monitoredvibration signals is available to us. The data were obtainedfrom a laboratory fatigue experiment which was conducted underan identical condition. We use stochastic filtering to predictthe residual life distribution given the monitored conditionmonitoring history to date. As the life data are available,we can compare them with the prediction. The predicted resultsare satisfactory and provide a basis for further studies. Itshould be pointed out that although the model itself is developedfor the bearings concerned, it can be generalized to modellinggeneral condition-based maintenance decison making providedsimilar conditions are met.     

Comparisons in the mean residual life order of coherent systems with identically distributed components

The comparisons of the performance of coherent systems (under different stochastic criteria) is an important task in the reliability theory. Several results have been obtained in the literature for the stochastic, hazard rate and likelihood ratio orders. In this paper, we obtain comparison results for the mean residual life order of coherent systems with identically distributed (ID) component lifetimes. These results can be applied not only to the usual case of systems with independent and identically distributed components but also to the case of systems with exchangeable components and to the more general case of just ID components. The results obtained are based on the representation of the system distribution as a distorted distribution of the common components' distribution. Some specific comparison results are given to illustrate the theoretical results. The comparison results for distorted distributions given here can also be applied to other statistical concepts such as order statistics, generalized order statistics or record values. Copyright © 2015 John Wiley & Sons, Ltd.     

On the residual properties of link groups

We study the residual properties of finitely generated linear groups. Using the methods under consideration, we prove the residual 2-finiteness of the groups of the Whitehead link, the Borromean links (answering a question of Cochran), and some other links. We show also that each link is a sublink of some link whose group is residually 2-finite.     

On the mean residual life of a k-out-of-n:G system with a single cold standby component

The concept of mean residual life is one of the most important characteristics that has been widely used in dynamic reliability analysis. It is a useful tool for investigating ageing properties of technical systems. In this paper, we define and study three different mean residual life functions for k-out-of-n:G system with a single cold standby component. In particular, we obtain explicit expressions for the corresponding functions using distributions of order statistics. We also provide some stochastic ordering results associated with the lifetime of a system. We illustrate the results for various lifetime distributions.     

Core and residual intersections of ideals

D. Rees and J. Sally defined the core of an -ideal as the intersection of all (minimal) reductions of . However, it is not easy to give an explicit characterization of it in terms of data attached to the ideal. Until recently, the only case in which a closed formula was known is the one of integrally closed ideals in a two-dimensional regular local ring, due to C. Huneke and I. Swanson. The main result of this paper explicitly describes the core of a broad class of ideals with good residual properties in an arbitrary local Cohen-Macaulay ring. We also find sharp bounds on the number of minimal reductions that one needs to intersect to get the core.

     

Stability of the residual free bubble method for bilinear finite elements on rectangular grids

We consider the nature of the stabilizing term arising in theresidual free bubble approach for piecewise bilinear functionson rectangular grids. We show, that on the subspace of piecewiselinear functions the stabilizing term is identical to that inthe streamline diffusion approach. However, on the space ofpiecewise bilinear functions there is a case in which the stabilizingterm is weaker compared to the term used in the streamline diffusionmethod. In the particular case when the direction of the convectionis parallel to a diagonal of the quadrilateral, control is lostover the mixed derivatives in the convection-dominated limit.     

Some results on the residual life at random time

In this paper, we consider the residual life at random time, i.e.X _Y =X−Y\X>Y, whereX andY are non-negative random variables. We establish a number of stochastic comparison properties forX _Y under various assumptions ofX andY. Under the assumption thatY has decreasing reverse hazard rate (DRHR), we show that ifX is in any one of the classes IFR, DFR, DMRL or IMRL thenX _Y is in the same class asX. We also obtain some useful bounds for the distribution and the moment ofX _Y . Because the idle time in classicalGI/G/1 queuing system can be regarded as the residual life at random time, the results obtained in this paper have applications in the study of such system. This work is supported by the National Natural Science Foundation of China.     

Effect of residual stresses on the strength of oriented glass-reinforced plastics

The effect of structural residual stresses on the strength of a glass-reinforced plastic loaded along and across the fibers is investigated. It is established that the residual stresses lead to an increase in the strength of the glass-reinforced plastic across the fibers and to cracking of the polymer matrix in tension along the fibers, but have practically no effect on the combined deformation of the matrix and the fibers in compression.Moscow Ordzhonikidze Aviation Institute. Translated from Mekhanika Polimerov, No. 3, pp. 475–480, May–June, 1969.