First-Principles Study of Structural Stabilities, Electronic and Optical Properties of SrF2 under High Pressure

An investigation of structural stabilities, electronic and optical properties of SrF2 under high pressure is conducted using a first-principles calculation based on density functional theory （DFT） with the plane wave basis set as implemented in the CASTEP code. Our results predict that the second high-pressure phase of SrF2 is of a Ni2In- type structure, and demonstrate that the sequence of the pressure-induced phase transition of SrF2 is the fluorite structure （Fm3m） to the PbC12-type structure （Pnma）, and to the Ni2In-type phase （P63/mmc）. The first and second phase transition pressures are 5. 77 and 45.58 GPa, respectively. The energy gap increases initially with pressure in the Fm3m, and begins to decrease in the Pnma phases at 30 GPa. The band gap overlap metallization does not occur up to 210 GPa. The pressure effect on the optical properties is discussed.     

Theoretical study of ground state and high-pressure phase of platinum carbide

We report local density-functional calculations using the full-potential linearized muffin-tin orbital method (FP-LMTO) for platinum carbide (PtC) in the, rock-salt (B1), zinc-blende (B3), wurtzite (B4), nickel-arsenide (B8) and PbO (B10) structures. The ground state properties such as the equilibrium lattice constant, elastic constants, the bulk modulus and its pressure derivative of PtC in these phases are determined and compared with available experimental and theoretical data.Our calculations show that the ground state phase of PtC to be zinc-blende (B3) structure at zero pressure and the nickel-arsenide (B8) structure is a high-pressure phase. The transition pressures at which this compound undergoes the structural phase transition from (B3) to (B8) and from (B3) to (B1) are found to be 34.25 and 51.28 GPa, respectively. The highest bulk modulus values in the nickel-arsenide (B8), zinc-blende (B3), rock-salt (B1) and PbO (B10) structures indicate that PtC is a hard material.     

High pressure study of structural and electronic properties of magnesium telluride

The full-potential linear muffin-tin orbital method (FP-LMTO) within the local density approximation (LDA) is used to calculate the electronic band structures and the total energies of MgTe in its stable (NiAs-B8) and high pressure phases. The latter provide us with the ground state properties such us lattice parameter, bulk modulus and its pressure derivatives. The transition pressure at which this compound undergoes the structural phase transition from the NiAs to CsCl phase is calculated. The energy band gaps and their volume and pressure dependence in the stable NiAs-B8 phase are investigated. The ground state properties, the transition pressure are found to agree with the experimental and other theoretical results. The elastic constants at equilibrium in both NiAs and CsCl structure are also determined.     

BeO高压相变和声子谱的第一性原理计算

采用第一性原理方法计算了BeO在零温时的高压相变和三种结构在零温零压时的声子谱.相变的计算表明,在122GPa左右的压力下BeO会发生从纤锌矿(B4)结构到氯化钠(B1)结构的相变,而闪锌矿(B3)结构在零温零压下是一种可能的亚稳态结构.采用冷声子方法计算了这三种结构的BeO在零温零压下的声子谱.计算结果表明:B1结构在零温零压下是一种不稳定的结构;尽管B4结构和B3结构具有明显的相似性,仍然可以通过声子谱来很好的区分.最后根据准简谐近似理论计算得到了BeO的高温高压相图.     

The pressure dependences of elastic and lattice dynamic properties of AlAs from ab initio calculations

Ab initio calculations,based on norm-conserving nonlocal pseudopotentials and density functional theory(DFT),are performed to investigate the structural,elastic,dielectric,and vibrational properties of aluminum arsenide(AlAs) with a zinc-blende(B3) structure and a nickel arsenide(B81) structure under hydrostatic pressure.Firstly,the path for the phase transition from B3 to B81 is confirmed by analyzing the energies of different structures,which is in good agreement with previous theoretical results.Secondly,we find that the elastic constants,bulk modulus,static dielectric constants,and the optical phonon frequencies vary in a nearly linear manner under hydrostatic pressure.What is more,the softening mode of the transversal acoustic mode at the X point supports the phase transition in AlAs.     

High pressure structural,electronic and vibrational properties of InN and InP

A first-principles plane wave self-consistent method with the Ultrasoftpseudopotential scheme in the framework of density functional theory is performed to study the high pressure structural, electronic and vibrational properties of InX (X = N, P) for the zinc-blende (ZnS/B3), rock-salt (NaCl/B1) and cesium-chloride (CsCl/B2) phases. We also calculate the phase transition pressures among these different phases. Conclusions based on electronic energy band structure, phonon dispersion and phonon density of states at high pressure phases along phase transition regions are outlined.     

High pressure phase transition and elastic properties of thorium chalcogenides

The structural and elastic properties of thorium chalcogenides at high pressure, have been investigated using a suitable inter-ionic potential. The calculated equation of state, phase transition pressures for B1-B2 transition and bulk moduli for ThX (X=S,Se,Te) compounds agree well with the experimental results. ThTe, which crystallizes in the CsCl structure, does not show any structural transition up to 48 GPa. The present analysis does not show any anomalous features in elastic properties arising from ‘f’ electrons.     

SrS相变和弹性性质的第一原理计算

利用平面波赝势密度泛函方法和准谐德拜模型研究了SrS从NaCl结构到CsCl结构的相变以及弹性性质.在零温下,我们计算的相变压强为17.9 GPa,这与实验值和其他作者的计算值符合很好.研究还表明:相变压强随温度增加而非线性地增加,然而力学不稳性的压强随温度增加而线性地增加.     

高压下CaPo弹性性质和热力学性质的第一性原理研究

利用密度泛函理论的平面波赝势方法预测研究了CaPo从岩盐结构(B1结构)到氯化铯结构(B2结构)的相变以及B1结构CaPo高压下的弹性性质以及热力学性质等.通过等焓原理发现B1→B2的相变压力为22.8GPa. 同时计算了B1结构CaPo高压下的弹性常数以及剪切模量、杨氏模量等相关弹性参数,结果发现当压力超过20GPa时,B1结构CaPo开始不稳定了,这和等焓原理所得结果相符合. 最后通过Debye模型成功获取了B1结构C 关键词： 相变 弹性性质 热力学性质 CaPo     

Electronic,elastic and dynamical properties of MgSe under pressure: rocksalt and iron silicide phase

The electronic, elastic and dynamical properties of MgSe in the rocksalt (B1) and iron silicide (B28) phase and the effects of pressure on these properties are investigated using first-principles method. The calculated electronic band structure indicates that the B1 phase of MgSe presents an indirect band-gap feature and the band gaps initially increase with pressure and subsequently decrease upon compression. Remarkably, an indirect-to-direct band-gap transition has been observed at the phase transition pressure. The elastic constants, bulk modulus, shear modulus, Young’s modulus, elastic anisotropy and B/G ratio of MgSe in the B1 and B28 phase at high pressure have also been investigated. The bulk modulus, shear modulus and Young’s modulus all increase monotonously with the increasing of pressure for the B1 and B28 phase of MgSe. The calculated phonon frequencies of the B1 phase at zero pressure agree well with available theoretical results. And the transverse acoustic phonon TA(X) mode of this phase completely softening to zero at 82 GPa. The phonon curves of the B28 phase under pressure have also been successfully investigated.     

Pressure dependences of elastic and lattice dynamic properties of AlAs from ab initio calculations

Ab initio calculations, based on norm-conserving nonlocal pseudopotentials and density functional theory (DFT), are performed to investigate the structural, elastic, dielectric, and vibrational properties of aluminum arsenide AlAs with zinc-blende (B3) structure and nickel arsenide (B8₁) structure under hydrostatic pressure. Firstly, the path for the phase transition from B3 to B8₁ is confirmed by analyzing the energies of different structures, which is in good agreement with previous theoretical results. Secondly, we find that the elastic constants, bulk modulus, static dielectric constants, and the optical phonon frequencies are varying in a nearly linear manner under hydrostatic pressure. What is more, the softening mode of transversal acoustic mode at X point supports the phase transition in AlAs.     

Surface Structure and Electronic Property of InP（001）-（2×1）S Surface： A First-Principles Study

The surface structure and electronic property of InP（001）-（2 ×1）S surface under S-rich condition are investigated based on first-principles simulations. The analyses of phase transition show that the 3B model is the most stable structure and the S-S dimer is difficult to form. The geometry of the 3B structure agrees well with the experiments. It is also found that the 3B structure has a good passivation with a band gap of about 1.24eV. The results indicate that the 3B structure is the best candidate for the sulfur-rich InP（001）（2 × 1）A phase.     

Identification of the pressure-induced phase transition of ZnSe with the positron annihilation method

This paper studies the pressure-induced phase transition between zincblende (B3) and NaCl (B1) structure ZnSe by using the hydrostatic pressure first-principles pseudopotential plane wave method. The energy-volume and enthalpy-pressure curves are employed to estimate the transition pressure. It is found that ZnSe undergoes a first-order phase transition from the B3 structure to the B1 structure at approximately 15 GPa derived from the energy-volume relation and 14 GPa based on deduction from enthalpy-pressure data. The pressure-related positron bulk lifetimes of the two ZnSe structures are calculated with the atomic superposition approximation method. In comparison with the 13.4% reduction in volume of ZnSe at the transition pressure, the positron bulk lifetime decreases more significantly and the relative value declines up to 22.3%. The results show that positron annihilation is an effective technique to identify and characterize the first-order phase transition and can give valuable information about changes in micro-scale, such as volume shrinkage and compressibility.     

高压下TiN的结构转变、弹性和热力学性质的第一性原理计算

 利用基于密度泛函的第一性原理,计算了高压下TiN的结构转变、弹性和热力学性质。计算结果表明：在压力作用下,TiN经历了从NaCl型结构到CsCl型结构的转变,转变压力为348 GPa;TiN的弹性系数随着压力的增加呈线性增加规律。此外,还给出了德拜温度和热容量这两个重要热力学量与温度和（或）压力的依赖关系。     

Analysis of structural properties of refractory compounds at high temperature and pressure using a potential model

In this paper we focused on the structural and elastic properties of four transition metal mononitrides (TMNs) (M=Ti, Nb, Hf and Zr) by using realistic three body interaction potential (RTBIP) model, including the role of temperature. These TMN compounds have been found to undergo NaCl (B1) to CsCl (B2) phase transition, at a pressure quite high as compared to other binary systems. We successfully obtained the phase transition pressures and volume changes at different temperatures. In addition, elastic constants of TMNs at different temperatures are discussed. The present theoretical results have been compared with the available experimental data and predictions of LDA theory.     

高压下钡的硫化物的结构相变和光学性质研究(英文)

利用基于密度泛函的第一性原理,计算了高压下钡的硫化物(BaS、BaSe和BaTe)的结构相变和光学性质。计算结果表明,这些化合物的压致结构相变是从NaCl型结构转变为CsCl型结构;对于结构转变压力和金属化转变压力,BaS为8.57 GPa和45.4 GPa,BaSe为7.44 GPa和36.5 GPa,BaTe则分别为5.67 GPa和16.7 GPa。光学性质计算结果显示:随着压力的增加,静态介电常数ε0不断增加,介电常数虚部ε2的峰值向高能方向移动(蓝移)。     

Characterisation of the high-pressure structural transition and elastic properties in boron arsenic

This paper carries out the First principles calculation of the crystal structures (zinc blende (B3) and rocksalt (B1)) and phase transition of boron arsenic (BAs) based on the density-functional theory. Using the relation between enthalpy and pressure, it finds that the transition phase from the B3 structural to the B1 structural occurs at the pressure of 113.42GPa. Then the elastic constants C₁₁, C₁₂, C₄₄, bulk modulus, shear modulus, Young modulus, anisotropy factor, Kleinman parameter and Poisson ratio are discussed in detail for two polymorphs of BAs. The results of the structural parameters and elastic properties in B3 structure are in good agreement with the available theoretical and experimental values.     

高压下CaF_2结构相变和光学性质的第一性原理计算

利用基于密度泛函理论的第一性原理方法,计算了在压力作用下CaF2的结构相变和光学性质。结果证实了CaF2的压致结构转变的顺序是从氟石结构(空间群Fm3m)转变到PbCl2型结构(空间群Pnma),然后继续转变为Ni2In型结构(空间群P63/mmc)。在Fm3m和Pnma两种结构中,电子带隙随着压力的增加而增加,而在P63/mmc结构中,带隙随着压力的增加开始下降。实验结果显示,直到210 GPa,CaF2没有发生由绝缘体到金属的转变。据此推测,CaF2的金属化压力高于300 GPa。还讨论了压力对CaF2光学性质的影响。     

First-Principle Calculations for Transition Phase and Elastic Properties of SrS

The transition phase and elastic properties of SrS from NaCl structure （B1） to CsCl structure （B2） are investigated by ab initio plane-wave pseudopotential density functional theory method and by the quasi-harmonic Debye model. The transition pressure varies non-linearly with temperature, and the pressure of the mechanical instability increases linearly with increasing temperature. It is shown that the B1 structure SrS is a most elastically anisotropic minerat any pressure. The Debye temperature, the heat capacity, thermal expansion and Gruneisen parameter over a wide range of pressures and temperatures are also obtained.     

高压下RhB的相变、弹性性质、电子结构及硬度的第一性原理计算

采用密度泛函理论中的赝势平面波方法系统地研究了高压下RhB的结构相变、弹性性质、电子结构和硬度.分析表明,RhB在25.3 GPa时从anti-NiAs结构相变到FeB结构,这两种结构的弹性常数、体弹模量、剪切模量、杨氏模量和弹性各向异性因子的外压力效应明显.电子态密度的计算结果显示,这两种结构是金属性的,且费米能级附近的峰随着压强的增大向两侧移动,赝能隙变宽,轨道杂化增强,共价性增强,非局域化更加明显.此外,硬度计算结果显示,anti-NiAs-RhB的金属性比较弱,有着较高的硬度,属于硬质材料.