A Novel Diamine, 4′-Phenylphenyl 4-(3″, 5″-Diaminobenzoyloxy)- benzoate and Longer Side-chain Polyimide

This is a part of our systematic research work on polyimides with mesogenic unit side chain. In this study, a new 4′-phenylphenyl 4-(3″,5″-diaminobenzoyloxy)benzoate and polyimide were synthesized, and characterized by FTIR, 1H-NMR, inherent viscosity, mechanical properties,and solubility measurements. The diamine composed with mesogenic unit aryl ester groups and biphenyl group with longer L/D ratio, was synthesized by two key steps. Firstly, the hydroxy group of 4-hydroxybenzoic acid was protected by acetoxy group for avoiding self- polymerization of 4-hydroxybenzoic acid, and then selectively hydrolyzed after esterification of carboxyl.Secondly, a selective catalysis hydrogenation was adopted to prevent the aryl ester from deoxidation. Based on this diamine, a novel polyimide was prepared by polycondensation of 4′-phenylphenyl 4-(3″, 5″-diaminobenzoyloxy)benzoate and 4-aminophenyl ether(ODA) with 4,4′-oxydiphthalic anhydride(ODPA) in N-methyl-2-pyrrolidone (NMP). The resulting polyimide with longer side chain showed better solubility and more regular structure. Its inherent viscosity is lower than that without side chains, but its modulus and strength not only maintained, even improved.     

A Novel Diamine, 4′-Phenylphenyl 4-(3′′, 5′′-Diaminobenzoyloxy)- benzoate and Longer Side-chain Polyimide

In our previous study,the polyimides with the side-chain were obtained from3,5-diaminobenzoic-4′-biphenyl ester(DABBE)1.This kind of polyimide films showed some interesting properties,such as excellent solubility,lower density,and higher tensile strength.To understand the influence of various mesogenic units,making reference to those synthesis of polyimides with side-chain2-3,in this study,a novel diamine with higher length/diameter(L/D)ratio containing aryl ester group and biphenyl unit wa…     

Soluble polyimides from a semi-aliphatic diamine containing ester,amide and ether groups

A diamine was synthesized by two successive reactions.Nucleophilic reaction of 4-hydroxybenzoic acid with terephthaloyl chloride yielded terephthaloyl bis(4-oxybenzoic) acid.Then reaction of this compound with 1,8-diamino-3,6- dioxaoctane via Yamazaki method resulted in preparation of diamine named terephthalic acid bis(4-{2-[2-(2-amino ethoxy)ethoxy]ethyl carbamoyl}phenyl) ester.After fully characterization it was used to prepare new polyimides through polycondensation with different dianhydrides using trimethylchlorosilane.Characterization of polymers was achieved by common methods and their physical properties including inherent viscosity,thermal behavior,thermal stability,crystallinity and solubility were studied.Prepared polyimides showed improved solubility and good thermal stability.     

Heat-resistant, pyridine-based polyamides containing ether and ester units with improved solubility

<正>A diamine containing ether and ester units,as basic monomer for the preparation of polyamides,was prepared via three consecutive reactions.Nucleophilic substitution reaction of 1,4-dihydroxy benzene with 4-nitrobenzoyl chloride produced 4-hydroxyphenyl 4-nitrobenzoate(HPNB).Reduction of nitro groups to amino groups using Fe and HC1 resulted in preparation of 4-hydroxyphenyl 4-aminobenzoate(HPAB).The diamine was synthesized through nucleophilic substitution reaction of HPAB with 2,6-dichloropyridine The precursors and diamine were fully characterized by common methods,and the diamine was polycondensed with different diacid chlorides in the presence of an acid scavenger to prepare new polyamides.The polyamides were characterized,and their physical properties including thermal stability and behavior, inherent viscosity and solubility were studied.     

Synthesis and Characterization of Novel Polyimides Based on Pyridine-containing Diamine

A new aromatic diamine monomer containing pyridine unit, 2,6-bis （4-aminophenoxy- 4＇-benzoyl）pyridine（BABP）, was synthesized in three steps, starting from 2,6-pyridinedicarboxyl chloride. A series of novel pyridine-containing polyimides were prepared v/a the polycondensation of BABP with various aromatic dianhydrides through poly（amic acid） precursors, and thermal or chemical imidization of the precursors. The polyimides exhibit desirable properties, e.g., good solubility in N-methyl-2-pyrrolidone and m-cresol, excellent thermal stability and film-forming capability, as well as high inherent viscosity, indicating high molecular weight.     

Synthesis of a Novel Diamine 4-[（4＇-Butoxyphenoxy）carbonyl]- phenyl-3＂, 5＂-diaminobenzoate and Corresponding Polyimides

A novel diamine 4-[（4＇-butoxyphenoxy）carbonyl]phenyl-3＂,5＂-diaminobenzoate （BCDA） was synthesized from 4-butoxyphenol, 4-hydroxybenzoic acid and 3,5-dinitrobenzoic acid through four main intermediates, and a series of polyimides were also synthesized. All the intermediates and the final product were characterized by FTIR and 1H-NMR. The key step in synthesis route is selective hydrolyzation of two ester groups in 4-butoxyphenyl-4＇-acetoxybenzoate, by adjusting the reaction temperature and the concentration of ammonia, shorteding the reaction time. The properties of the novel polyimides, such as the aggregation structures, glass transition temperature, solubility and the pretilt angles, were carded out.     

Novel organosoluble polyimide based on an asymmetric bis(ether amine): 3, 4′-Bis(4-aminophenoxy)-benzophenone

A new kind of asymmetrical ether diamine,3,4’-bis（4-aminophenoxy）benzophenone（BABP）,was synthesized from the nucleophilic substitution reaction of 4-chloronitrobenzene and 3,4’-dihydroxybenzophenone in the presence of potassium carbonate,followed by catalytic reduction with SnCl₂-6H₂O and concentrated hydrochloric acid.The prepared diamine was employed in the preparation of a novel polyimide containing asymmetrical diaryl ether segments via the polycondensation of it with BTDA by a two-step method.The resulting polyimide exhibits excellent solubility,film-forming capability and high thermal resistance.     

Synthesis of a Novel Diamine 4-[(4''''-Butoxyphenoxy)carbonyl]phenyl-3",5"-diaminobenzoate and Corresponding Polyimides

A novel diamine 4-[(4'-butoxyphenoxy)carbonyl]phenyl-3",5"-diaminobenzoate (BCDA) was synthesized from 4-butoxyphenol, 4-hydroxybenzoic acid and 3,5-dinitrobenzoic acid through four main intermediates, and a series of polyimides were also synthesized. All the intermediates and the final product were characterized by FTIR and 1H-NMR. The key step in synthesis route is selective hydrolyzation of two ester groups in 4-butoxyphenyl-4'-acetoxybenzoate, by adjusting the reaction temperature and the concentration of ammonia, shorteding the reaction time. The properties of the novel polyimides, such as the aggregation structures, glass transition temperature, solubility and the pretilt angles, were carried out.     

Polyamides with pendant 1,3,4-oxadiazole and pyridine moieties

A novel aromatic diamine,2-（5-（3,5-diaminophenyl）-l,3,4-oxadiazole-2-yl）pyridine（POBD）,containing a pyridine ring and a 1,3,4-oxadiazole moiety,was synthesized.It was used in a polycondensation with various aromatic and aliphatic diacid chlorides to generate a series of new aromatic polyamides with pendant 1,3,4-oxadiazole groups.The prepared polyamides were characterized by IR,elemental analysis and through the synthesis of model compounds.Thermophysical properties of the synthesized polyamides have been studied by DSC,TGA and inherent viscosity measurements. Relatively high inherent viscosity values（0.76-1.62 dL/g,in 0.125%H₂SO₄ at 25℃） were observed for these compounds. Number average molecular weight（M_n） of the polymers was measured by vapor phase osmometry（VPO）.The introduction of bulky side chains in the structure of aromatic polyamides led to increased solubility of these polymers in common polar and aprotic solvents,such as DMF,DMSO,NMP and DMAc,which allowed thin films to be cast from polymer solutions. The highest molecular weight（M_n = 51190） was observed for polymer（DC）,which was prepared from pyridine-2,6-dichlorocarbonyl.     

Synthesis and characterization of novel polyimides based on thiazole-containing diamine

A new kind of aromatic diamine monomer containing thiazole unit,2-amino-5-(4-aminophenyl)-thiazole (AAPT),was synthesized in three steps,starting from 4-nitroacetophenone.A novel thiazole-containing polyimide was prepared via the polycondensation of AAPT with 6FDA by one-step method.The resulting polyimide exhibits excellent solubility,film-forming capability and high thermal resistance.     

Synthesis of novel aromatic polyimides containing bulky side chain for vertical alignment liquid crystals

In this study, a novel 4-（4-octyloxybenzoyloxy）biphenyl-3′,5′-diaminobenzoate and polyimides based on it were synthesized. The polyimide with mesogenic unit side chain exhibited excellent vertical alignment for nematic liquid crystal （LC）. The pretilt angles of LCs above 89° were kept after the rubbing process with 220 mm rubbing strength. The polyimide films as the alignment layer were baked at 120℃ for 12 h, the vertical alignment of LCs was still uniform and stable. Meanwhile, the UV-vis spectra of the noyel polyimide films showed the high transparency in a visible wave length.     

Synthesis, Characterization and Properties of Poly（aryl amides） Containing Methoxy Substituted Phthalazinone Moiety

A novel aromatic diamine, 1, 2-dihydro-2-（4-aminophenyl）-4-[3-methoxy-4-（4-aminophenoxy）]-2, 3-phthalazin-l-one （OO-DA） containing aza heterocyclic structure was synthesized from the bisphenol-like monomer in two steps and used for preparing new aromatic polyamides with high inherent viscosity of 0.89-1.03 dL.g^-1. The structures of diamine and polymers obtained were confirmed by MS, PT-IR, WAXD and ^1H-NMR. The synthesized polymers exhibited high glass transition temperature in the range of 281-307℃ and good solubility in polar solvents.     

Synthesis of a new pyridine-containing diamine and related polyimide

<正>A new kind of aromatic diamine monomer containing pyridine unit,2,6-bis[4-(4-aminophenoxy)phenoxy]pyridine(BAPP),was synthesized in three steps,using hydroquinone as starting material.A novel pyridine-containing polyimide was prepared from the resulting diamine BAPP with 4,4'-oxydiphthalic anhydride(ODPA) via a conventional two-step thermal imidization method.The resulting polyimide exhibits excellent solubility,film-forming capability and high thermal resistance.     

Allyl phthalazinone synthesis,polymerization and polymer properties

A phthalazinone monomer with an allyl group, i.e. 4-（3-allyl-4-hydroxyphenyl）phthalazin-1（2H）-one, was synthesized and then copolymerized with 4-（4-hydroxylphenyl）（2H）-phthalazin-1-one and 2,6- diflurobenzonitrile by means of aromatic nucleophilic polycondensation to provide a series of crosslinkable poly（aryl ether nitrile）s. The virgin copolymers exhibited good solubility in polar organic solvents with relative high molecular weights （Mw： 45,130-58,403, inherent viscosities： 0.58-0.75 dL/ g）. After cross-linking, the thermal stability and solvent resistance of the polymer increased.     

Synthesis and characterization of organosoluble polyamides from quinoxaline based diamine

<正>Aromatic/aliphatic polyamides were synthesized from a diamine monomer,2,3-bis-p-aminophenylquinoxaline (Ⅳ),based on quinoxaline and various dicarboxylic acids of aliphatic,aromatic and heterocyclic.The diamine and polyamides were characterized by elemental analysis,FTIR and ~1H-NMR.The solubility of the polyamides was affected by the quinoxaline and heterocyclic groups in the polymer chain.They were all soluble in common organic solvents such as dimethylsulfoxide(DMSO),N,N-dimethylformamide(DMF) and N-methylpyrolidone(NMP).The polyamides showed inherent viscosity in the range of 0.25-0.3 dL/g in DMSO at 25℃and good thermal stability with the char yields in the range of 65%-82%at 600℃in nitrogen.     

Synthesis of anew siloxane-containing diamine and related polyimide

A novel siloxane-containing diamine, bis[4-(p-aminophenoxy)phenoxy]dimethylsilane (APPMS), was successfully synthesized in three steps using hydroquinone as starting material, which was reacted with 4,4'-oxydiphthalic anhydride (ODPA) via a conventional two-step thermal or chemical imidization method to produce a new siloxane-containing polyimide. The resulting polyimide exhibited excellent solubility, and film-forming capability.     

STUDY OF CHIRAL SIDE CHAIN LIQUID CRYSTALLINE POLYMERS

Five kinds of side chain liquid crystalline polymers with a chiral component in the pendant group were synthesized and characterized by GPC, polarizing microscopy, DSC, X-ray diffraction ano Dielectric Relaxation Spectroscopy. The liquid crystalline behaviour of the polymers is affected by the length of flexible spacer, which links the mesogenic side chain to the polymer backbone and mesogenic moiety. The characteristic of smectic phase is observed for all the polymers.     

Synthesis and characterization of novel polyimides derived from unsymmetrical diamine:2-Amino-5-[4-(2’-aminophenoxy)phenyl]-thiazole

A new kind of thiazole-containing unsymmetrical ortho-diamine monomer,2-amino-5-[4-(2’- aminophenoxy)phenyl]-thiazole(o-AAPPT),was synthesized by four steps,using 4-hydroxyacetophenone as starting material.A novel thiazole-containing polyimide was prepared from the resulting diamine o-AAPPT with BTDA via a conventional one-step method.The resulting polyimide exhibits excellent solubility,film-forming capability and high thermal and thermo-oxidative stability.     

Organosoluble Aliphatic-Aromatic Poly（ether-amide）s Based on Pyridine Moiety in the Main Chain： Synthesis,Characterization and Thermal Studies

A series organosoluble and heterocyclic poly（ether-amide）s （PEA）s were synthesized from a new diamine containing pyridine moiety and four aliphatic-aromatic dicarboxylic acids by direct polycondensation reactions. Dicarboxilic acids 4a-4d containing ether groups were synthesized in two step reactions. At first, dialdehydes 3a-3d were synthesized from four dibromo alkanes la-ld and 4-hydroxybenzaldehyde 2, then dicarboxilic acids 4a-4d were synthesized from dialdehydes 3a-3d and malonic acid in a solvent free reaction. On the other hand, the new diamine 8 containing pyridine ring was synthesized in two step reactions. The structures of synthesized monomers and polymers were proven by FTIR, NMR spectroscopy and elemental analysis. Also all of the above polymers were fully characterized by inherent viscosity, solubility tests, gel permeation chromatography （GPC）, differential scanning calorimetry （DSC） and thermogravimetric analysis （TGA）. The resulted PEAs have shown good inherent viscosities, solubility and thermal properties.     

Synthesis and characterization of optically active poly(amide-imide)s based on [N,N′-(4,4′-carbonyldiphtaloyl)-bis-lamino diacid]s and 1,5-bis(4-aminophenyl)penta-1,4-dien-3-one

Six dicarboxylic acids 3a-3f were synthesized by the reaction of 3,3’,4,4’-benzophenonetetracarboxylic dianhydride 1 with L-aminoacids 2a-2f in a solution of glacial acetic acid/pyridine(Py) at refluxing temperature.Then six new poly(amide-imide)s PAIs were synthesized from the direct polycondensation reaction of[N,N’-(4,4’- carbonyldiphtaloyl)-bis-L-amino diacid]s with 1,5-bis(4-aminophenyl)penta-1,4-dien-3-one(APPD).The polymerization reactions produced a series of new optically active PAIs with high yield and good inherent viscosity.Also these PAIs are optically active and soluble in various organic solvents.These resulting new polymers can be used in column chromatography for the separation of enantiomeric mixtures.The resulted polymers were fully characterized by means of FTIR and ~1H-NMR spectroscopy,elemental analyses,inherent viscosity measurements,solubility tests and thermogravimetric analysis(TGA).