Influence of Alkylammonium Acetate Buffers on Protein–Ligand Noncovalent Interactions Using Native Mass Spectrometry

We investigate the influence of three volatile alkylammonium acetate buffers on binding affinities for protein–ligand interactions determined by native electrospray ionization-mass spectrometry (ESI-MS). Four different types of proteins were chosen for this study. A charge-reduction effect was observed for all the cases studied, in comparison to the ions formed in ammonium acetate solution. When increasing the collision energy, the complexes of trypsin and the ligand were found to be more stable when sprayed from alkylammonium acetate buffers than from ammonium acetate. The determined dissociation constant (K_d) also exhibited a drop (up to 40%) when ammonium acetate was replaced by alkylammonium acetate buffers for the case of lysozyme and the ligand. The prospective uses of these ammonium acetate analogs in native ESI-MS are discussed in this paper as well.

Open image in new window

Graphical Abstract ?

     

Gold Ion–Angiotensin Peptide Interaction by Mass Spectrometry

Stimulated by the interest in developing gold compounds for treating cancer, gold ion–angiotensin peptide interactions are investigated by mass spectrometry. Under the experimental conditions used, the majority of gold ion–angiotensin peptide complexes contain gold in the oxidation states I and III. Both ESI-MS and MALDI-TOF MS detect singly/multiply charged ions for mononuclear/multinuclear gold-attached peptides, which are represented as [peptide + a Au(I) + b Au(III) + (e - a -3b) H]^e+, where a,b ≥ 0 and e is charge. ESI-MS data shows singly/multiply charged ions of Au(I)-peptide and Au(III)-peptide complexes. This study reveals that MALDI-TOF MS mainly detects singly charged Au(I)-peptide complexes, presumably due to the ionization process. The electrons in the MALDI plume seem to efficiently reduce Au(III) to Au(I). MALDI also tends to enhance the higher polymeric forms of gold-peptide complexes regardless of the laser power used. Collision-induced dissociation experiments of the mononuclear and dinuclear gold-attached peptide ions for angiotensin peptides show that the gold ion (a soft acid) binding sites are in the vicinity of Cys (a soft ligand), His (a major anchor of peptide for metal ion chelation), and the basic residue Arg. Data also suggests that the abundance of gold-attached peptides increases with higher gold concentration until saturation, after which an increase in gold ion concentration leads to the aggregation and/or precipitation of gold-bound peptides.     

Does Electron Capture Dissociation Cleave Protein Disulfide Bonds?

Peptide and protein characterization by mass spectrometry (MS) relies on their dissociation in the gas phase into specific fragments whose mass values can be aligned as ‘mass ladders’ to provide sequence information and to localize possible posttranslational modifications. The most common dissociation method involves slow heating of even-electron (M+n H)ⁿ⁺ ions from electrospray ionization by energetic collisions with inert gas, and cleavage of amide backbone bonds. More recently, dissociation methods based on electron capture or transfer were found to provide far more extensive sequence coverage through unselective cleavage of backbone N–Cα bonds. As another important feature of electron capture dissociation (ECD) and electron transfer dissociation (ETD), their unique unimolecular radical ion chemistry generally preserves labile posttranslational modifications such as glycosylation and phosphorylation. Moreover, it was postulated that disulfide bond cleavage is preferred over backbone cleavage, and that capture of a single electron can break both a backbone and a disulfide bond, or even two disulfide bonds between two peptide chains. However, the proposal of preferential disulfide bond cleavage in ECD or ETD has recently been debated. The experimental data presented here reveal that the mechanism of protein disulfide bond cleavage is much more intricate than previously anticipated.     

Gas-Phase Structure of Amyloid-β (12 – 28) Peptide Investigated by Infrared Spectroscopy, Electron Capture Dissociation and Ion Mobility Mass Spectrometry

The gas-phase structures of doubly and triply protonated Amyloid-β_12-28 peptides have been investigated through the combination of ion mobility (IM), electron capture dissociation (ECD) mass spectrometry, and infrared multi-photon dissociation (IRMPD) spectroscopy together with theoretical modeling. Replica-exchange molecular dynamics simulations were conducted to explore the conformational space of these protonated peptides, from which several classes of structures were found. Among the low-lying conformers, those with predicted diffusion cross-sections consistent with the ion mobility experiment were further selected and their IR spectra simulated using a hybrid quantum mechanical/semiempirical method at the ONIOM DFT/B3LYP/6-31 g(d)/AM1 level. In ECD mass spectrometry, the c/z product ion abundance (PIA) has been analyzed for the two charge states and revealed drastic differences. For the doubly protonated species, N – C_α bond cleavage occurs only on the N and C terminal parts, while a periodic distribution of PIA is clearly observed for the triply charged peptides. These PIA distributions have been rationalized by comparison with the inverse of the distances from the protonated sites to the carbonyl oxygens for the conformations suggested from IR and IM experiments. Structural assignment for the amyloid peptide is then made possible by the combination of these three experimental techniques that provide complementary information on the possible secondary structure adopted by peptides. Although globular conformations are favored for the doubly protonated peptide, incrementing the charge state leads to a conformational transition towards extended structures with 3₁₀- and α-helix motifs.      

Protein–Protein Binding Affinities in Solution Determined by Electrospray Mass Spectrometry

Electrospray ionization (ESI) allows the transfer of multi-protein complexes into the gas phase, thereby providing a simple approach for monitoring the stoichiometry of these noncovalent assemblies by mass spectrometry (MS). It remains unclear, however, whether the measured ion abundance ratios of free and bound species are suitable for determining solution-phase binding affinities (K _d values). Many types of mass spectrometers employ rf-only quadrupoles as ion guides. This work demonstrates that the settings used for these devices are a key factor for ensuring uniform transmission behavior, which is a prerequisite for meaningful affinity measurements. Using bovine β-lactoglobulin and hemoglobin as model systems, it is demonstrated that under carefully adjusted conditions the “direct” ESI-MS approach is capable of providing K _d values that are in good agreement with previously published solution-phase data. Of the several ion sources tested, a regular ESI emitter operated with pressure-driven flow at 1 μL min^–1 provided the most favorable results. Potential problems in these experiments include conformationally-induced differences in ionization efficiencies, inadvertent collision-induced dissociation, and ESI-induced clustering artifacts. A number of simple tests can be conducted to assess whether or not these factors are prevalent under the conditions used. In addition, the fidelity of the method can be scrutinized by performing measurements over a wide concentration range. Overall, this work supports the viability of the direct ESI-MS approach for determining binding affinities of protein–protein complexes in solution.     

Improved Accuracy of Low Affinity Protein–Ligand Equilibrium Dissociation Constants Directly Determined by Electrospray Ionization Mass Spectrometry

There is continued interest in the determination by ESI-MS of equilibrium dissociation constants (K_D) that accurately reflect the affinity of a protein–ligand complex in solution. Issues in the measurement of K_D are compounded in the case of low affinity complexes. Here we present a K_D measurement method and corresponding mathematical model dealing with both gas-phase dissociation (GPD) and aggregation. To this end, a rational mathematical correction of GPD (f_sat) is combined with the development of an experimental protocol to deal with gas-phase aggregation. A guide to apply the method to noncovalent protein–ligand systems according to their kinetic behavior is provided. The approach is validated by comparing the K_D values determined by this method with in-solution K_D literature values. The influence of the type of molecular interactions and instrumental setup on f_sat is examined as a first step towards a fine dissection of factors affecting GPD. The method can be reliably applied to a wide array of low affinity systems without the need for a reference ligand or protein.     

Probing the Gaseous Structure of a β-Hairpin Peptide with H/D Exchange and Electron Capture Dissociation

An improved understanding of the extent to which native protein structure is retained upon transfer to the gas phase promises to enhance biological mass spectrometry, potentially streamlining workflows and providing fundamental insights into hydration effects. Here, we investigate the gaseous conformation of a model β-hairpin peptide using gas-phase hydrogen–deuterium (H/D) exchange with subsequent electron capture dissociation (ECD). Global gas-phase H/D exchange levels, and residue-specific exchange levels derived from ECD data, are compared among the wild type 16-residue peptide GB1p and several variants. High protection from H/D exchange observed for GB1p, but not for a truncated version, is consistent with the retention of secondary structure of GB1p in the gas phase or its refolding into some other compact structure. Four alanine mutants that destabilize the hairpin in solution show levels of protection similar to that of GB1p, suggesting collapse or (re)folding of these peptides upon transfer to the gas phase. These results offer a starting point from which to understand how a key secondary structural element, the β-hairpin, is affected by transfer to the gas phase. This work also demonstrates the utility of a much-needed addition to the tool set that is currently available for the investigation of the gaseous conformation of biomolecules, which can be employed in the future to better characterize gaseous proteins and protein complexes.

Open image in new window

Graphical Abstract ?

     

Dissociation Kinetics of the Streptavidin–Biotin Interaction Measured Using Direct Electrospray Ionization Mass Spectrometry Analysis

Dissociation rate constants (k _off ) for the model high affinity interaction between biotin (B) and the homotetramer of natural core streptavidin (S₄) were measured at pH 7 and temperatures ranging from 15 to 45 °C using electrospray ionization mass spectrometry (ESI-MS). Two different approaches to data analysis were employed, one based on the initial rate of dissociation of the (S₄? + ?4B) complex, the other involving nonlinear fitting of the time-dependent relative abundances of the (S₄? + ?iB) species. The two methods were found to yield k _off values that are in good agreement, within a factor of two. The Arrhenius parameters for the dissociation of the biotin–streptavidin interaction in solution were established from the k _off values determined by ESI-MS and compared with values measured using a radiolabeled biotin assay. Importantly, the dissociation activation energies determined by ESI-MS agree, within 1 kcal?mol^–1, with the reported value. In addition to providing a quantitative measure of k _off , the results of the ESI-MS measurements revealed that the apparent cooperative distribution of (S₄? + ?iB) species observed at short reaction times is of kinetic origin and that sequential binding of B to S₄ occurs in a noncooperative fashion with the four ligand binding sites being kinetically and thermodynamically equivalent and independent.      

Unusual Fragmentation of Peptide and Protein in Matrix-assisted Laser Desorption/lonization Mass Spectrometry

Unusual amine - bond fragmentation on the peptide/protein backbone has been reported using matrix - assisted laser desorption/ionization time - of- flight mass spectrometry (MALDI - TOFMS)The amine - bond cleavage occurred without metastable decay, while the peptide - bond cleavage occurred with metastable decay of peptide ions in a drift region of TOF mass analyzer. It was presumed that the amine - bond cleavage occurred as a non - ergodic process independent of the ionization under MALDI conditions.     

Probing Conformational Changes of Ubiquitin by Host–Guest Chemistry Using Electrospray Ionization Mass Spectrometry

We report mechanistic studies of structural changes of ubiquitin (Ub) by host–guest chemistry with cucurbit[6]uril (CB[6]) using electrospray ionization mass spectrometry (ESI-MS) combined with circular dichroism spectroscopy and molecular dynamics (MD) simulation. CB[6] binds selectively to lysine (Lys) residues of proteins. Low energy collision-induced dissociation (CID) of the protein-CB[6] complex reveals CB[6] binding sites. We previously reported (Anal. Chem. 2011, 83, 7916–7923) shifts in major charge states along with Ub-CB[6] complexes in the ESI-MS spectrum with addition of CB[6] to Ub from water. We also reported that CB[6] is present only at Lys₆ or Lys₁₁ in high charge state (+13) complex. In this study, we provide additional information to explain unique conformational change mechanisms of Ub by host–guest chemistry with CB[6] compared with solvent-driven conformational change of Ub. Additional CID study reveals that CB[6] is bound only to Lys₄₈ and Lys₆₃ in low charge state (+7) complex. MD simulation studies reveal that the high charge state complexes are attributed to the CB[6] bound to Lys₁₁. The complexation prohibits salt bridge formation between Lys₁₁ and Glu₃₄ and induces conformational change of Ub. This results in formation of high charge state complexes in the gas phase. Then, by utilizing stronger host–guest chemistry of CB[6] with pentamethylenediamine, refolding of Ub via detaching CB[6] from the protein is performed. Overall, this study gives an insight into the mechanism of denatured Ub ion formation via host-guest interactions with CB[6]. Furthermore, this provides a direction for designing function-controllable supramolecular system comprising proteins and synthetic host molecules.      

Gas-Phase Binding of Noncovalent Complexes Between α-cyclodextrin and Amino Acids Investigated by Mass Spectrometry

Noncovalent complexes between cyclodextrins and small molecules have been extensively studied recently because of their widespread application in the pharmaceutical industry for chiral and molecular recognition. To date, gas phase noncovalent binding affinities between α-cyclodextrin and amino acids have not been widely investigated. In this study, gas-phase binding of noncovalent complexes between α-CD and amino acids was investigated by electrospray ionization mass spectrometry (ESI-MS), demonstrating the formation of 1:1 stoichiometric noncovalent complexes. The binding of the complexes were further confirmed by collision-induced dissociation by tandem mass spectrometry. Mass spectrometric titrations between α-cyclodextrin and phenylalanine, glutamic acid, and arginine were performed to provide binding constants (lgK_a) as references for competitive ESI-MS. Calibration curves for the complexes of α-cyclodextrin with phenylalanine, glutamic acid, and arginine were plotted. Through competitive ESI-MS, the lgK_a for the complexes of α-CD with aspartic acid, lysine, proline, glycine, alanine, asparagine, cystine, glutamine, histidine, leucine, isoleucine, methionine, serine, threonine, and valine were measured directly. By comparison, it is seen that the measured binding constants for the complexes of α-cyclodextrin with basic amino acids such as arginine and lysine are lower than those for most complexes of neutral amino acids. The chiral selectivity of α-cyclodextrin for L- and D-isomers of methionine, threonine, asparagine, and phenylalanine determined by ESI-MS revealed its application as a chiral selector.     

Quantifying Protein–Protein Interactions by Molecular Counting with Mass Photometry

Interactions between biomolecules control the processes of life in health and their malfunction in disease, making their characterization and quantification essential. Immobilization- and label-free analytical techniques are desirable because of their simplicity and minimal invasiveness, but they struggle with quantifying tight interactions. Here, we show that mass photometry can accurately count, distinguish by molecular mass, and thereby reveal the relative abundances of different unlabelled biomolecules and their complexes in mixtures at the single-molecule level. These measurements determine binding affinities over four orders of magnitude at equilibrium for both simple and complex stoichiometries within minutes, as well as the associated kinetics. These results introduce mass photometry as a rapid, simple and label-free method for studying sub-micromolar binding affinities, with potential for extension towards a universal approach for characterizing complex biomolecular interactions.     

Electron Capture Dissociation of Disulfide, Sulfur–Selenium, and Diselenide Bound Peptides

To examine the electron capture dissociation (ECD) behavior of disulfide (S?CS), sulfur?Cselenium (S?CSe), and diselenide (Se?CSe) bonds-containing peptides, a series of free cysteine (Cys) and selenocysteine (Sec) containing peptides were reacted to form interchain S?CS, S?CSe, and Se?CSe bonds, and then studied using ECD with Fourier transform ion cyclotron mass spectrometry (FTICR MS). These results demonstrate that the radical has higher tendency to stay at selenium rather than sulfur after the cleavage of Se?CS bonds by ECD. In addition, ?CSH (?C33), ?CS (?C32), and ?CS + H (?C31) small neutral losses were all observed from the cleavage of C?CS bonds of a disulfide bound peptide. Similar, but minor, fragments were also detected in S?CSe bound peptides. In contrast, the cleavage of C?CSe bonds of the Se?CSe species mainly forms fragments with neutral loss of ?CSe + H (?C78.90868), and the radical tends to stay on the selenium of its corresponding complementary pair. Although the electron affinities of S atom (2.07?eV) and Se atom (2.02?eV) are very close; they have very different reactivity towards electrons. The replacement of sulfur with selenium greatly increases the electron affinities of S?CSe and Se?CSe bonds comparing to S?CS bonds (with an increase of electron affinity by about 0.20?eV by replacing a sulfur with a selenium) (Int J Quantum Chem 110:513-523, 2010), which in turn leads to different ECD fragmentation behavior and mechanisms. Our results are in good agreement with previously published ab initio calculations on Se?CSe compounds by other groups.     

Cyanide–Arene Meisenheimer Complex Generated in Electrospray Ionization Mass Spectrometry Using Acetonitrile as a Solvent

The C – C bond formation activated under negative electrospray ionization of an acetonitrile solution of 1,3,5-trinitrobenzene is reported. The solvent function is to provide a source of cyanide ion, a highly problematic reagent, which is found to attack the electron-deficient aromatic ring to form a covalently bound anionic complex (Meisenheimer complex). The structure of the complex is elucidated by means of collision induced dissociation mass spectrometry and IR multiple photon dissociation spectroscopy in the ‘fingerprint’ region.

Comprehensive Investigation of Yttrium and Rare Earth Element Complexation by Carbonate Ions Using ICP–Mass Spectrometry

Carbonate stability constants for yttrium and all rare earth elements have been determined at 25°C and 0.70 molal ionic strength by solvent exchange and inductively coupled plasma–mass spectrometry (ICP–MS). Measured stability constants for the formation of and from M³⁺ are in good agreement with previous direct measurements, which involved the use of radio-chemical techniques and trivalent ions of Y, Ce, Eu, Gd, Tb, and Yb. Direct ICP–MS measurements of and formation constants are also in general agreement with modeled stability constants for the metals La, Pr, Nd, Sm, Dy, Ho, Er, Tm, and Lu, based on linear-free energy relationship (LFER). The experimental procedures developed in this work can be used for assessing the complexation behavior of other geochemically important ligands such as phosphate, sulfate, and fluoride.     

Determination of Pesticides in Carrots by Gas Chromatography–Mass Spectrometry

ABSTRACT

A sensitive and selective method was developed to determine pesticides in carrots by gas chromatography–mass spectrometry following the development of an optimized extraction procedure. The method was validated for 30 organochlorine pesticides for gas chromatography with electron capture detection obtaining limit of detection from 0.18 to 0.92?µg/kg except for cis- and trans-permenthrin. Twenty-six carrot samples were analyzed and six pesticides were detected. The results compared with the accepted maximum residue levels in correlation to crop origin.     

Structural Characterization and Disulfide Assignment of Spider Peptide Phα1β by Mass Spectrometry

Native Phα1β is a peptide purified from the venom of the armed spider Phoneutria nigriventer that has been shown to have an extensive analgesic effect with fewer side effects than ω-conotoxin MVIIA. Recombinant Phα1β mimics the effects of the native Phα1β. Because of this, it has been suggested that Phα1β may have potential to be used as a therapeutic for controlling persistent pathological pain. The amino acid sequence of Phα1β is known; however, the exact structure and disulfide arrangement has yet to be determined. Determination of the disulfide linkages and exact structure could greatly assist in pharmacological analysis and determination of why this peptide is such an effective analgesic. Here, we used biochemical and mass spectrometry approaches to determine the disulfide linkages present in the recombinant Phα1β peptide. Using a combination of MALDI-MS, direct infusion ESI-MS, and nanoLC-MS/MS analysis of the undigested recombinant Phα1β peptide and digested with AspN, trypsin, or AspN/trypsin, we were able to identify and confirm all six disulfide linkages present in the peptide as Cys1-2, Cys3-4, Cys5-6, Cys7-8, Cys9-10, and Cys11-12. These results were also partially confirmed in the native Phα1β peptide. These experiments provide essential structural information about Phα1β and may assist in providing insight into the peptide’s analgesic effect with very low side effects.

Open image in new window

Graphical Abstract ?

     

Atmospheric Pressure Photo Ionization Hydrogen/Deuterium Exchange Mass Spectrometry—a Method to Differentiate Isomers by Mass Spectrometry

In this report, a method for in-source hydrogen/deuterium (H/D) exchange at atmospheric pressure is reported. The method was named atmospheric pressure photo ionization hydrogen/deuterium exchange mass spectrometry (APPI HDX MS). H/D exchange was performed by mixing samples dissolved in toluene with CH₃OD solvent and analyzing the mixture using atmospheric pressure photo ionization mass spectrometry (APPI-MS). The APPI HDX spectra obtained with contact times between the analyte solution and methanol-OD (CH₃OD) of?<?0.5 s or 1 h showed the same pattern of H/D exchange. Therefore, it was concluded that APPI HDX occurred in the source but not in the solution. The proposed method does not require a specific type of mass spectrometer and can be performed at atmospheric pressure. H/D exchange can be performed in any laboratory with a mass spectrometer and a commercial APPI source. Using this method, multiple H/D exchanges of aromatic hydrogen and/or H/D exchange of active hydrogen were observed. These results demonstrated that H/D exchange can be used to distinguish between isomers containing primary, secondary, and tertiary amines, as well as pyridine and pyrrole functional groups.

Determination of Volatiles in Water Lily Flowers Using Gas Chromatography–Mass Spectrometry

Volatile organic compounds in the stamens, petals, and pistils of 56 water lily cultivars were determined by headspace solid-phase microextraction coupled with gas chromatography–mass spectrometry. The stamens released a majority of the volatiles. A total of 117 volatile organic compounds were determined. Alkanes and alkenes were the most abundant, followed by aldehydes and ketones. Cluster analysis was used to divide the cultivars into three subsets characterized by specific aromatic compounds and associated aromas. Discriminant analysis confirmed the results of the cluster analysis. Three tropical water lily cultivars Colorata, 34, and Ai Ji Bai and one hardy water lily cultivar Somptuosa had particularly high aromatic compound concentrations and are recommended to produce fragrant, colorful, and hardy specimens.