Polymerization of cyclic ethers in the presence of maleic anhydride. Part I. Polymerization of trioxane and 3,3-bis(chloromethyl)oxetane by γ-rays,ultraviolet light,and benzoyl peroxide

Cyclic ethers such as trioxane and 3,3-bis(chloromethyl)oxetane have been polymerized easily in the presence of maleic anhydride by the irradiation of γ-rays and ultraviolet light. The polymer formed is a homopolymer of cyclic ether. The rate of polymerization is accelerated by suitable amounts of oxygen which is required to form some active species at the initiation step. The polymerization is inhibited by the addition of a small amount of radical scavenger, thus suggesting a radical initiating mechanism. In addition, the polymerization is easily initiated by benzoyl peroxide even in vacuo at or above 50°C. Diaroyl and diacyl peroxides are also effective, and polymerization also proceeds in the presence of chloromaleic anhydride, exactly in the same manner as in maleic anhydride. On the other hand, it is well known that polymerization of these cyclic monomers rarely occurs with radical catalysts and easily with cationic catalysts in the absence of maleic anhydride. From these results, it may be concluded that the polymerization is brought about by means of a radical–cationic species.     

The chemistry of 2H-3,1-benzoxazine-2,4(1H)-dione (isatoic anhydride). 21. a mild process for the preparation of 10-alkyl-9-acridanones and it's application to the synthesis of acridone alkaloids

10-Substituted-9-acridanones are readily prepared by the reaction of the corresponding isatoic anhydride with the lithium enolate of 2-cyclohexen-1-one. The initially formed product, the 1,2-dihydroacridone need not be purified but can be aromatized directly with DDQ to the desired acridone. This methodology is applicable to the synthesis of acridone natural products. Two alkaloids, 1,2,3-trimethoxy-10-methylacridone ( 9 ) and evoxanthine ( 10 ), were prepared from 4,5,6-trimethoxy-N-methylisatoic anhydride and 6-methoxy-4,5-methyl-enedioxy-N-methylisatoic anhydride respectively. In these trioxygenated systems, palladium-on-charcoal must be used to aromatize the penultimate intermediate.     

Terpolymerization of sulfur dioxide or maleic anhydride with unsaturated compounds under ultraviolet irradiation

The effect of ultraviolet irradiation on the terpolymerization was investigated. In the terpolymerizations of sulfur dioxide–butene-1–acrylonitrile, sulfur dioxide–butene-1–n-butyl acrylate, and maleic anhydride–allyl chloride–acrylonitrile systems, the composition of the terpolymers prepared under ultraviolet irradiation was different from those prepared in the dark. The unit content of sulfur dioxide and butene-1 or of maleic anhydride and allyl chloride in the terpolymer increased under ultraviolet irradiation. The nature of the growing end under ultraviolet irradiation is supposed to be the same as that of the dark polymerization on the basis of the same solvent effect on the terpolymer composition, the rate of polymerization and the molecular weight of polymer. The experimental results suggest that the complex between sulfur dioxide and butene-1 or maleic anhydride and allyl chloride might be excited by ultraviolet light and the excited complex may participate in the terpolymerization.     

Surface grafting of polymers onto inorganic ultrafine particles: Reaction of functional polymers with acid anhydride groups introduced onto inorganic ultrafine particles

The surface grafting onto inorganic ultrafine particles, such as silica, titanium oxide, and ferrite, by the reaction of acid anhydride groups on the surfaces with functional polymers having hydroxyl and amino groups was examined. The introduction of acid anhydride groups onto inorganic ultrafine particle was achieved by the reaction of hydroxyl groups on these surfaces with 4-trimethoxysilyltetrahydrophthalic anhydride in toluene. The amount of acid anhydride groups introduced onto the surface of ultrafine silica, titanium oxide, and ferrite was determined to be 0.96, 0.47, and 0.31 mmol/g, respectively, by elemental analysis. Functional polymers having terminal hydroxyl or amino groups, such as diol-type poly(propylene glycol) (PPG), and diamine-type polydimethylsiloxane (SDA), reacted with acid anhydride groups on these ultrafine particles to give polymer-grafted ultrafine particles: PPG and SDA were considered to be grafted onto these surfaces with ester and amide bond, respectively. The percentage of grafting increased with increasing acid anhydride group content of the surface: the percentage of grafting of SDA (M_n = 3.9 × 10³) onto silica, titanium oxide, and ferrite reaching 64.7, 33.7, and 24.1%, respectively. These polymer-grafted ultrafine particles gave a stable colloidal dispersion in organic solvents.     

Synthesis of Quinizarin and Its Derivatives under Conditions of Microwave Activation

In a microwave field, phthalic anhydride reacts with p-chlorophenol to give 1,4-dihydroxyanthraquinone (quinizarin) within 10 min. The reaction with 4-chlorophthalic anhydride occurs similarly. Phthalic and chlorophthalic acids can be used instead of anhydrides. 3-Nitrophthalic acid and 3,4,5,6-tetrabromophthalic anhydride do not react with p-chlorophenol under these conditions.     

Stereochemical effects in mass spectrometry XIII—Determination of absolute configuration by fast atom bombardment mass spectrometry

It was found that in the fast atom bombardment mass spectra of some asymmetric secondary alcohols and amines, when a pair of enantiomers, such as (2R,3R)- and (2S,2S)-2,3-diacetoxysuccinic anhydride and (2R,3R)- and (2S,3S)-2,3-dibenzoyloxysuccinic anhydride, were used as reagents, the relative abundances of characteristic ions formed by the stereoselective reaction between a sample and a reagent of different configurations were much higher than those of ions formed by a sample and a reagent of the same configuration. The absolute configurations of the sample molecule may be predicted by examination of the mass spectra of the sample measured with reagents of R and S configurations. This approach proved to be a convenient way to determine the absolute configuration of organic molecules at the micromole level by fast atom bombardment mass Spectrometry, and it has advantages over the chemical ionization method reported previously for the analysis of polar and involatile compounds.     

Thermally stable polymers based on bismaleimides containing amide,imide, and ester linkages

Seven new structurally different bismaleimides were synthesized and characterized by infrared and proton nuclear magnetic resonance spectroscopy. The chain of these polymer precursors was extended by incorporating amidized, imidized, and esterified 4-chloroformyl phthalic anhydride. The bismaleimides containing amide and imide linkages were prepared by a simple synthetic route based on the reaction of the monomaleamic acid derived from various aromatic diamines (1 mol) with 4-chloroformyl phthalic anhydride (0.5 mol) and subsequent cyclodehydration of the intermediate triamic acid. In addition, chain extended bismaleimides were prepared by reacting the monomaleamic acid derived from p-phenylenediamine with several dianhydrides such as p-phenylene bis(trimellitamide anhydride), p-phenylene bis(trimellitate anhydride), and bis-phenol A bis(trimellitate anhydride). The differential thermal analysis scans of bismaleimides showed exotherms at 221–304°C associated with their polymerization reactions. The thermogravimetric analysis traces of polymers did not show a weight loss up to 351–393 and 344–372°C in N₂ and air atmospheres, respectively. The anaerobic char yield of polymers at 800°C was 44–61%. These polymers can be used for fabrication of composites having improved properties.     

Synthesis and acylating properties of 4,5-dihydro-6H-1,3,4- oxadiazin-6-ones

Cyclization of α-acylhydrazinoacids with dicyclohexylcarbodiimide or with acetic anhydride allows an easy entry to the little known class of 4, 5-dihydro-6H-1, 3, 4-oxadiazin-6-ones. Such compounds maintain the optical activity of the starting hydrazino acids and may be exploited as useful acylating agents.     

Synthesis and characterization of new poly(N-1-adamantylmaleimide) and poly(N-1-diamantylmaleimide)

N-l-Diamantylmaleimide was synthesized by reaction of maleic anhydride with 1-aminodiamantane, followed by dehydration with acetic anhydride and sodium acetate. Poly(N-1-adamantylmaleimide) ( IIa ) and poly(N-l-diamantylmaleimide) ( IIb ) were polymerized using 2,2′-azobisisobutyronitrile (AIBN) as an initiator under different experimental conditions such as various initiator concentrations, solvents, polymerization temperatures, and polymerization times. Polymerizations of N-l-adamantylmaleimide in benzene at 60°C or in bulk gave polymers with molecular weights (2000–9500). The experimental results indicated that the propagation may be interrupted by steric hindrance of bulky and rigid substituents such as the adamantyl or diamantyl groups. In addition, the effect of chain transfer to monomer contributes to the relatively low activation energy. The glass transition temperatures of Ia and Ib were 204 and 216°C, respectively. The temperatures at 5% weight loss of the polymers IIa and IIb were above 412°C. © 1996 John Wiley & Sons, Inc.     

Syntheses of flame-retarding 4-phosphonatomethyl-2,6-dibromophenyl trimellitate anhydrides and their reactivities toward epoxy resin

4-Phosphonatomethyl-2,6-dibromophenyl trimellitate anhydrides (HDBBP–TMA) were prepared by the condensation of 4-chloroformyl phthalic anhydride with corresponding 4-hydroxy-3,5-dibromobenzyl phosphonates (HDBBP). These materials could be used to produce excellent flame retardance in epoxy resins when the substances were chemically combined with the polymer. The reactive-type HDBBP–TMA showed much better phosphorus–bromine synergistic effects on the flame retardancy of epoxy resins than the additive-type compounds such as HDBBP or the mixture of bromo compound (such as 2,6-dibromo-p-cresol) and phosphorus compound (such as triphenyl phosphite). Meanwhile, the oxygen index of cured epoxy resin was proved to be relative to the extent of crosslinking. Reactivities of HDBBP–TMA toward epoxy were also studied by rheometer in comparison with those of trimellitic anhydride and its derivatives such as 4-methylphenyl trimellitate anhydride and 4-methyl-2,6-dibromophenyl trimellitate anhydride.     

Aliphatic polyimides from phenylene bis(succinic anhydride) and bis(glutaric anhydride)

Meta and para derivatives of phenylene bis(succinic anhydride) and bis(glutaric anhydride) were obtained from 1,3- and 1,4-bis(β-cyano-β-carbethoxyvinyl)benzene with potassium cyanide or Meldrum acid followed by hydrolysis with concentrated hydrochloric acid and dehydration with acetic anhydride. Aliphatic polyimides were prepared from these anhydrides with six aromatic diamines through thermal ring closure of polyamic acids obtained by solution polymerization in dimethylacetamide, and thermal stability of these polyimides was examined by thermogravimetric analysis.     

Grafting of maleic anhydride to n-eicosane

Maleic anhydride was grafted to the linear hydrocarbon, n-eicosane, at 165°C in the presence of the free radical initiator, 2,5-dimethyl-2,5-di(t-butylperoxy)-3-hexyne. The anhydride has a low solubility in eicosane and a multiple addition procedure was adopted. Grafted product which separated from the reaction mixture was fractionated and analyzed. The fractions contained on average 2–5.5 anhydride units/eicosane residue. ¹H- and ¹³C-NMR studies show that the grafts consist of single succinic anhydride rings. At the concentrations of maleic anhydride chosen for homogeneous reaction ( < 0.02 M) and at 165°C, poly(maleic anhydride) is above its ceiling temperature, so that succinic anhydride radicals cannot add maleic anhydride to form polymer side chains. Instead, these radicals abstract hydrogen atoms to yield grafts consisting of single anhydride units.     

Spectroscopic studies of the electron donor-acceptor interactions of aromatic hydrocarbons with tetrachlorophthalic anhydride

Electron donor-acceptor (EDA) interactions of tetrachlorophthalic anhydride (TCPA) with benzene,p-xylene, mesitylene, fluorene,t-stilbene and pyrene have been investigated by spectroscopic technique. The spectroscopic and thermodynamic parameters of the complexes formed are reported. The enthalpies of formation range between 0.2 to 5.0 kcal mole⁻¹. Among all the donors studied, pyrene appears to be the strongest electron donor towards tetrachlorophthalic anhydride.     

Derivate des 5, 6-Dihydro-p-dithiin-2, 3-dicarbonsäure-anhydrids,I: Imide

5. 6-Dihydro-p-dithiin-2. 3-dicarboxylic anhydride reacts with primary amines quite readily to form the substituted imides. The imide formation occurs much more easily than with maleic or phthalic anhydride. The imide and all N-substituted imides have a fairly strong, bright yellow colour. Their absorption spectra differ considerably from those of the anhydride, ester and dinitrile. Electron-attracting substituents on the imide nitrogen increase the absorption maximum somewhat, while strongly electron-releasing groups decrease it, and may even shift it to a shorter wave-length. It is therefore concluded that the imide nitrogen is part of the election acceptor group of the chromorphoric system.     

Kinetics and mechanistic investigation of epoxy–anhydride compositions cured with quaternary phosphonium salts as accelerators

Mechanism and curing kinetics of bisphenol A epoxy resin–iso‐methyltetrahydrophthalic anhydride compositions using quaternary phosphonium salts as accelerators were investigated by differential scanning calorimetry (DSC) and electrospray mass‐spectrometry (ESI‐MS). The DSC method was applied to investigate curing kinetics and apparent activation energy values for the overall curing process. The DSC results showed that some of the phosphonium salts lead to a lower activation energy, that means they are more effective accelerators for the curing of epoxy–anhydride systems. The mechanism of curing was studied by ESI‐MS using the model reaction of epichlorohydrin (E) with phthalic anhydride (PA) in the presence of phosphonium salts or 2‐methylimidazole. Products containing the alkyl moiety of the phosphonium salt in form of alkyl esters could be identified. This suggests that the phosphonium salts activate the anhydride by electrophilic attack. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1088–1097     

Structure of poly(maleic anhydride)

The bulk polymerization of maleic anhydride initiated with acylperoxides, di-tert-butyl peroxide, AIBN, or pyridine proceeds with evolution of CO₂. The amount of CO₂ generated depends on the nature and the concentration of the initiator. With peroxide initiators, less than 5% of the polymerized maleic anhydride is decarboxylated. ¹H-NMR spectra, obtained on the benzoyl peroxide-initiated polymer and its methyl ester, are consistent with the unrearranged poly(maleic anhydride) structure and rule out the polycyclopentanone structure proposed by Braun and co-workers. Base-initiated polymaleic anhydride is substantially decarboxylated, and the resulting polymer has anhydride and carboxyl groups. Elemental analyses and ¹H-NMR spectra obtained on the pyridine-initiated polymer and its methyl ester refute both the cis-poly(vinylene ketoanhydride) structure suggested by Schopov and the polycylopentanone structure proposed by Braun and co-workers.     

Supercritical carbon dioxide assisted synthesis of amphiphilic graft copolymers based on poly(styrene-co-maleic anhydride) with methoxyl poly(ethylene glycol) side chains

Supercritical carbon dioxide（scCO₂） was used as a reaction medium in synthesizing amphiphilic graft copolymers composed of poly（styrene-co-maleic anhydride）（SMA） backbones and methoxyl poly（ethylene glycol）（MPEG） side chains via esterification.The synthesized copolymers were characterized by Fourier transform infrared spectroscopy（FTIR）,gel permeation chromatography（GPC）,¹H-NMR,thermo-gravimetric analysis（TGA） and differential scanning calorimetric analysis（DSC）.The gelation phenomenon was suppressed effectively by tuning reaction conditions.The influences of scCO₂ temperature and pressure on the conversion of anhydride were investigated.It was found that the highest conversion ratio occurred at 80℃under a constant pressure of 14 MPa or 26 MPa.With the increase of scCO₂ pressure,the conversion ratio increased first,and then leveled off.The conversion ratio of anhydride could be controlled by regulating the reaction conditions.It was also revealed that using low molecular weight MPEG brought a high conversion ratio of anhydride.     

Melt modification of poly(styrene‐co‐maleic anhydride) with alcohols in the presence of 1,3‐oxazolines

Various copolyesteramides were prepared by melt compounding at 220 °C involving reaction of poly(styrene‐co‐maleic anhydride), SMA, with 6, 17, and 28 wt % maleic anhydride content, and 1‐dodecanol, C12OH, in the presence of 2‐undecyl‐1,3‐oxazoline, C11OXA. Copolymer architectures were examined by means of ¹H NMR, FTIR, DSC, and TGA using model compounds prepared via solution reactions. While conversion of anhydride with alcohol was poor due to the thermodynamically favored anhydride ring formation, very high conversions were achieved when stoichiometric amounts of C11OXA were added. According to spectroscopic studies esteramide groups resulted from reaction of oxazoline with carboxylic acid intermediate. In the absence of alcohol, C11OXA reacted with anhydride to produce esterimides. Effective attachment of flexible n‐alkyl side chains via simultaneous reaction of C12OH and C11OXA resulted in lower glass‐transition temperatures of copolyesteramides. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1222–1231, 2000     

Functionalization of a poly(vinyl alcohol) in the solid state with a swelling agent by methacrylic anhydride

Poly(vinyl alcohol‐co‐vinyl acetate) was functionalized by methacrylic anhydride to introduce functional groups by a new process that consisted of modifying a polymer directly from a powder form in the solid state. To favor the diffusion of the reagents, a swelling agent composed by a mixture of ethylene carbonate and propylene carbonate was used. N‐methylimidazole was used as a basic catalyst of the esterification reaction, adjusting the reaction times. This work presents the process and the effects of the formulation on anhydride conversion. The side reactions were also determined; they all involved N‐methylimidazole. Decarboxylation reactions of the carbonates were characterized, that is, going from ethylene carbonate to ethylene glycol, which is able to react with two anhydride molecules by esterification reactions to, respectively, form 2‐hydroxyethyl 2‐methylpropenoate and ethyl 1,2‐bis(2‐methyl propenoate). The same side reactions are possible with propylene carbonate but are less reactive than the starting ethylene carbonate. Model anhydrides such as hexanoic and heptanoic anhydrides, less reactive than methacrylic anhydride, were used to characterize a new anhydride decarboxylation reaction. The homogeneity of the grafting is also discussed, especially its dependence on the polymer properties, the diffusion modes of the reagents (carbonate mixture and the anhydride), and the competition between the diffusional and chemical kinetics of methacrylic anhydride. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1618–1629, 2004     

Preparation of poly(p‐oxybenzoyl) crystals using direct polymerization of p‐hydroxybenzoic acid in the presence of boronic anhydrides

Poly(p‐oxybenzoyl) (POB) crystals were prepared by reaction‐induced crystallization during direct polymerization of p‐hydroxybenzoic acid in the presence of boronic anhydrides. Polymerizations were carried out at 300 °C in dibenzyltoluene at a concentration of 1% with three kinds of anhydrides of boronic acid such as 3,4,5‐trifluorophenylboronic acid (TFB), 4‐methoxyphenylboronic acid (MPB) and 4‐biphenylboronic acid (BPB). The POB crystals were formed as precipitates in the solution and the morphology was considerably influenced by both the structure of the boronic anhydride and its concentration (c_B). Needle‐like crystals were firmed in the presence of TFB anhydride (TFBA) at c_Bs of 5 and 10 mol % by the spiral growth of lamellae. Spherical aggregates of slab‐like crystals were formed at c_Bs from 50 to 100 mol %. The polymerization with MPB anhydride and BPB anhydride (BPBA) also yielded the needle‐like crystals at c_Bs of 50 and 5 mol %, respectively. The polymerization with TFBA at lower c_B was favorable to prepare the needle‐like crystal. Molecular weight was also influenced by the structure of the boronic anhydride and c_B. M_n increased generally with c_B and BPBA gave the highest M_n of 14.7 × 10³ at c_B of 100 mol %. The loose packing of the molecules in the crystal caused by the bulkiness of the end‐groups made the polymerization in the crystals more efficiently. Morphology and molecular weight of the POB crystals could be controlled by the chemical structure and the content of boronic anhydride. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.