Solid-phase synthesis of N-labeled acylpentamines as reference compounds for the MS/MS investigation of spider toxins

A solid-phase route for synthesis of ¹⁵N-labeled acylpolyamines is described. Utilizing alkylation at benzylic N-atom as a key step, ¹⁵N-atoms are incorporated by stepwise construction of the polyamine framework on the solid support. The derivatives were used as reference compounds for the investigation of the MS/MS behavior of spider toxins.     

The Synthesis and 31P NMR Spectral Studies of Cyclophosphazenes

A modified method for preparing large-scale quantities of pure hexachlorocyclophosphazene (N₃P₃Cl₆) and octachlorocyclotetraphosphazene (N₄P₄Cl₈), phosphorus pentachloride with ammonium chloride, in the presence of zinc chloride, has been developed. The time of the reaction and the quantities of the catalyst are also studied. It is found that the optimum reaction time is 1.5 h and by-products are remarkably reduced by addition of 10% zinc chloride. As indicated by the ³¹ P NMR spectra, the synthesis and separation of cyclophosphazenes can be accomplished in moderate yield of tetramer (39%) and good yield of trimer (83%).     

Automated Optimized Synthesis of [18F]FLT Using Non-Basic Phase-Transfer Catalyst with Reduced Precursor Amount

3′-deoxy-3′-[¹⁸F]fluorothymidine ([¹⁸F]FLT) is a positron emission tomography (PET) tracer useful for tumor proliferation assessment for a number of cancers, particularly in the cases of brain, lung, and breast tumors. At present [¹⁸F], FLT is commonly prepared by means of the nucleophilic radiofluorination of 3-N-Boc-5′-O-DMT-3′-O-nosyl thymidine precursor in the presence of a phase-transfer catalyst, followed by an acidic hydrolysis. To achieve high radiochemical yield, relatively large amounts of precursor (20–40 mg) are commonly used, leading to difficulties during purification steps, especially if a solid-phase extraction (SPE) approach is attempted. The present study describes an efficient method for [¹⁸F]FLT synthesis, employing tetrabutyl ammonium tosylate as a non-basic phase-transfer catalyst, with a greatly reduced amount of precursor employed. With a reduction of the precursor amount contributing to lower amounts of synthesis by-products in the reaction mixture, an SPE purification procedure using only two commercially available cartridges—OASIS HLB 6cc and Sep-Pak Alumina N Plus Light—has been developed for use on the GE TRACERlab FX N Pro synthesis module. [¹⁸F]FLT was obtained in radiochemical yield of 16 ± 2% (decay-corrected) and radiochemical purity >99% with synthesis time not exceeding 55 min. The product was formulated in 16 mL of normal saline with 5% ethanol (v/v). The amounts of chemical impurities and residual solvents were within the limits established by European Pharmacopoeia. The procedure described compares favorably with previously reported methods due to simplified automation, cheaper and more accessible consumables, and a significant reduction in the consumption of an expensive precursor.     

Alternate HPLC method for the analysis of tetrabutylammonium hydroxide in [18F]fluorodeoxythymidine (FLT)

Tetrabutylammonium hydroxide is a common reagent used in the synthesis of [¹⁸F]Fluorodeoxythymidine (FLT) for positron emission tomography imaging. The British Pharmacopeia monograph for the analysis of [¹⁸F]FLT was released in 2015 incorporating a HPLC method for the analysis of tetrabutylammonium hydroxide. We describe alternate HPLC conditions that mitigate the challenges in fulfilling the system suitability requirements such as signal to noise and symmetry factor that are specified in the monograph. Our method was validated by analyzing tetrabutylammonium hydroxide at a range of concentrations to determine the linearity (R²?=?0.994), accuracy (≤9.2%) and precision (≤3.2%). Our method does not affect the analysis of [¹⁸F]FLT and it complies with all requirements in the BP monograph.     

A new short synthesis of coumestrol and its application for the synthesis of [6,6a,11a-C3]coumestrol

A convenient and simple two-step method for the synthesis of coumestrol has been established, which involves a base catalysed condensation of phenyl acetate with benzoyl chloride, followed by demethylation and subsequent tandem intramolecular cyclisation. This method was then employed for the efficient synthesis of multiply ¹³C-labelled coumestrol.     

An Efficient Synthesis of Optically Active [4-13C] Labelled Quorum Sensing Signal Autoinducer-2

A new synthetic route for the quorum sensing signal Autoinducer-2 (AI-2) is described and used for the preparation of [4-¹³C]-AI-2 starting from [1-¹³C]-bromoacetic acid. The key step in this process was the enantioselective reduction of an intermediate ketone. This synthesis provides, selectively, both enantiomers of the labelled or unlabelled parent compound, (R) or (S)-4,5-dihydroxypentane-2,3-dione (DPD) and was used for an improved synthesis of [1-¹³C]-AI-2.     

复合催化剂上CO2加氢合成C2烃类

介绍了由CO₂+H₂合成C2⁺烃的几种复合催化剂体系的研究进展，比较和评价了复合催化剂体系的活性和选择性及对C2⁺烃类生成的影响。着重于复合催化剂体系对C4⁺烃的生成及产物分布的影响并简述反应机理。     

Synthesis of [3,4,8-C3]daidzein

The biological effects of the soy isoflavones have attracted considerable interest in recent years leading to numerous studies on dietary intake and epidemiology. Such studies require accurate and reproducible analytical methods. Herein we report the first synthesis of a multiply ¹³C-labelled daidzein derivative, [3,4,8-¹³C₃]daidzein, which has been employed as an internal standard in LC-MS and GC-MS analysis. The synthesis includes an improved three-step method for the synthesis of [2-¹³C]resorcinol as one building block.     

N-Oxides of polychloropyridines.13C NMR study

The effect ofN-oxidation of a series of polychloropyridines on¹³C NMR parameters has been studied. It has been established that inN-oxides of polychloropyridines an electric field through-space effect of theN-oxide group predominates in the shielding of the -carbon atom compared to the other carbon atoms. A linear correlation between¹³C NMR chemical shifts and total charge densities calculated by the MNDO method for the carbon atoms ofN-oxides of polychloropyridines has been found.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2425–2428, December, 1995.The authors are grateful to V. V. Kolchanov for help in the synthesis of compounds under study.     

Highly diastereoselective preparation of anti-α,β-dialkyl β-amino acids containing natural α-amino acid side chains

An efficient synthesis of anti-2-alkyl β³-amino acids was developed starting from the fully protected β³-amino acids. The strategy allows the introduction of the side chain of natural α-amino acids such as Ala, Phe and Ser at the C-2 position, with high diastereoselectivity. The preparation of 2-methyliden-β³-amino acids is also reported. This methodology does not need the use of expensive chiral reagents and/or chiral auxiliaries, and leads to compounds with orthogonal protecting groups.     

Synthesis and the structure of tribromo(7-bromobicyclo[4.1.0]hept-7-yl)germane

A general procedure was developed for the synthesis of halocyclopropylgermanes. This procedure was used for the preparation of tribromo(7-bromobicyclo[4.1.0]hept-7-yl)germane. The molecular structure was established by GLC-mass spectrometry, ¹H NMR spectroscopy, and X-ray diffraction analysis.     

Substitution clustering in a non-stoichiometric celsian synthesized by the thermal transformation of barium exchanged zeolite X

The thermal transformation of Ba exchanged zeolite X to celsian has been studied by ²⁷Al and ²⁹Si MAS NMR spectroscopy. Evidence for the degradation of the zeolite framework is present in the ²⁹Si NMR spectra after thermal treatment at 850 °C. Confirmation is provided by the ²⁹Si NMR data that synthesis of celsian via the decomposition of Ba exchanged zeolite leads to a single defect phase. Clustering of the isomorphous replacement of aluminium by silicon must occur to explain the observed ²⁹Si chemical shifts. The ²⁷Al NMR data show distorted aluminium co-ordination sites upon the thermal transformation of Ba exchanged zeolite X. The distortions present in the amorphous matrix are greater than those present in the monoclinic and hexagonal crystalline phases of celsian.     

Production of 6-l-[18F]Fluoro-m-tyrosine in an Automated Synthesis Module for 11C-Labeling

6-l-[¹⁸F]Fluoro-m-tyrosine (6-l-[¹⁸F]FMT) represents a valuable alternative to 6-l-[¹⁸F]FDOPA which is conventionally used for the diagnosis and staging of Parkinson’s disease. However, clinical applications of 6-l-[¹⁸F]FMT have been limited by the paucity of practical production methods for its automated production. Herein we describe the practical preparation of 6-l-[¹⁸F]FMT using alcohol-enhanced Cu-mediated radiofluorination of Bpin-substituted chiral Ni(II) complex in the presence of non-basic Bu₄ONTf using a volatile iPrOH/MeCN mixture as reaction solvent. A simple and fast radiolabeling procedure afforded the tracer in 20.0 ± 3.0% activity yield within 70 min. The developed method was directly implemented onto a modified TracerLab FX C Pro platform originally designed for ¹¹C-labeling. This method enables an uncomplicated switch between ¹¹C- and ¹⁸F-labeling. The simplicity of the developed procedure enables its easy adaptation to other commercially available remote-controlled synthesis units and paves the way for a widespread application of 6-l-[¹⁸F]FMT in the clinic.     

Selective synthesis and spectroscopic properties of alkyl-substituted lanthanide(<Emphasis Type="SmallCaps">III</Emphasis>) mono-, di-, and triphthalocyanines

Methods for the selective synthesis of mono-(^RPcLnOAc), di-(^RPc₂Ln), and triphthalocyanines (^RPc₃Ln₂) of rare-earth metals (Ln = Lu, Er, Eu) from symmetrically substituted 2,3,9,10,16,17,23,24-octaalkylphthalocyanines ^RPcH₂ (R = Et, Bu) were developed. The synthesized complexes were characterized by NMR spectroscopy, mass spectrometry, and electronic absorption spectra. The conditions for ¹H NMR spectra recording were optimized. Regularities in changing the spectral properties of the synthesized compounds, depending on the lanthanide nature and the planarity of metal phthalocyanine complexes, were found. tom@org.chem.msu.su Dedicated to Academician A. L. Buchachenko on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 2024–2030, September, 2005.     

Design of Homogeneous Hybrid Materials through a Careful Control of the Synthetic Procedure

Sols for the synthesis of hybrid organic-inorganic materials have been prepared by mixing zirconium n-propoxide and methacryloxypropyltrimethoxysilane (MPS). The synthesis was done in two steps: a 15 minute hydrolysis of a MPS : H₂O : EtOH 1 : 1 : 2 mixture and then addition of 0.5 molar equivalent of zirconium alkoxide. All the experimental parameters—hydrolysis ratio, pH, dilution, pre-hydrolysis time—have been optimized through a detailed ²⁹ Si and ¹⁷O NMR analysis. Immediately after the addition, 94% of the initial water was consumed for the formation of Si–O–Zr bridges. Cleavage of these bonds, associated with formation of Si–O–Si and Zr–O–Zr bridges are then observed during the aging time.     

Extraction of the Anticancer and Antimicrobial Agent,Prodigiosin, from Vibrio gazogenes PB1 and Its Identification by 1D and 2D NMR

Prodigiosin is a secondary metabolite produced in several species of bacteria. It exhibits antimicrobial and anticancer properties. Methods for the extraction and identification of prodigiosin and their related derivatives from bacterial cultures typically depend on solvent-based extractions followed by NMR spectroscopy. The estuarine bacterium, V. gazogenes PB1, was previously shown to produce prodigiosin. This conclusion, however, was based on analytical data obtained from ultraviolet-visible absorption spectrophotometry and infrared spectroscopy. Complete dependence on these techniques would be considered inadequate for the accurate identification of the various members of the prodiginine family of compounds, which possess very similar chemical structures and near-identical optical properties. In this study, we extracted prodigiosin from a culture of Vibrio gazogenes PB1 cultivated in minimal media, and for the first time, confirmed the synthesis of prodigiosin Vibrio gazogenes PB1 using NMR techniques. The chemical structure was validated by ¹H and ¹³C NMR spectroscopy, and further corroborated by 2D NMR, which included ¹H-¹H-gDQFCOSY, ¹H-¹³C-gHSQC, and ¹H-¹³C-gHMBC, as well as ¹H-¹H-homonuclear decoupling experiments. Based on this data, previous NMR spectral assignments of prodigiosin are reaffirmed and in some cases, corrected. The findings will be particularly relevant for experimental work relating to the use of V. gazogenes PB1 as a host for the synthesis of prodigiosin.     

Separation of 44Sc from 44Ti in the Context of A Generator System for Radiopharmaceutical Purposes with the Example of [44Sc]Sc-PSMA-617 and [44Sc]Sc-PSMA-I&T Synthesis

Today, ⁴⁴Sc is an attractive radionuclide for molecular imaging with PET. In this work, we evaluated a ⁴⁴Ti/⁴⁴Sc radionuclide generator based on TEVA resin as a source of ⁴⁴Sc. The generator prototype (5 MBq) exhibits high ⁴⁴Ti retention and stable yield of ⁴⁴Sc (91 ± 6 %) in 1 mL of eluate (20 bed volumes, eluent—0.1 M oxalic acid/0.2 M HCl) during one year of monitoring (more than 120 elutions). The breakthrough of ⁴⁴Ti did not exceed 1.5 × 10⁻⁵% (average value was 6.5 × 10⁻⁶%). Post-processing of the eluate for further use in radiopharmaceutical synthesis was proposed. The post-processing procedure using a combination of Presep^® PolyChelate and TK221 resins made it possible to obtain ⁴⁴Sc-radioconjugates with high labeling yield (≥95%) while using small precursor amounts (5 nmol). The proposed method takes no more than 15 min and provides ≥90% yield relative to the ⁴⁴Sc activity eluted from the generator. The labeling efficiency was demonstrated on the example of [⁴⁴Sc]Sc-PSMA-617 and [⁴⁴Sc]Sc-PSMA-I&T synthesis. Some superiority of PSMA-I&T over PSMA-617 in terms of ⁴⁴Sc labeling efficiency was demonstrated (likely due to presence of DOTAGA chelator in the precursor structure). It was also shown that microwave heating of the reaction mixture considerably shortened the reaction time and improved radiolabeling yield and reproducibility of [⁴⁴Sc]Sc-PSMA-617 and [⁴⁴Sc]Sc-PSMA-I&T synthesis.     

Novel Synthesis,Characterization of N1,N1,N4,N4-tetrakis (2-hydroxyethyl) terephthalamide (THETA) and Terephthalic Acid (TPA) by Depolymerization of PET Bottle Waste Using Diethanolamine

Chemical depolymerization of poly(ethylene terephthalate) (PET) waste is a possible remedy to huge amount of solid waste generation as it results in degradation products that possess a potential of recyclability. PET bottle waste was depolymerized by aminolysis using diethanolamine. Novel synthesis of N¹, N¹,N⁴,N⁴-tetrakis (2-hydroxyethyl) terephthalamide (THETA) with 73-76% yield and terephthalic acid (TPA) with 78-82% yield was achieved. The purified products were analyzed by FTIR, melting point, DSC, DTG and ¹H-NMR. THETA has various applications in the synthesis of rigid polyurethane foam, unsaturated polyester resins and also as a cross linking agent/ hardener for epoxy resins.     

Herstellung von Argininpeptiden mitN 7,N 8-(1,2-Dihydroxycyclohex-1,2-ylen)-Schutz

A method for the synthesis of arginine peptides is described, in which the side chain guanidine function is blocked through reaction with 1,2-cyclohexanedione in borate buffers.Coupling to the carboxyl group of arginine was achieved by active ester, by dicyclohexylcarbodiimide/1-hydroxybenzotriazole¹, and by the mixed anhydride methods². Neither lactam formation nor acylation of the vicinal hydroxyls of the N⁷, N⁸-(1,2-dihydroxycyclohex-1,2-ylene) guanidino group was observed.Removal of the protecting group is strongly influenced by steric factors. Some side reactions observed during modification of peptides and protein fragments with 1,2-cyclohexanedione are also described.

Herrn Professor Dr.Hermann Stetter zum 65. Geburtstag gewidmet.     

The substitution of germanium for silicon in AST-type zeolite

The substitution of silicon by germanium in the AST zeolite framework type, [Si_nGe_40−nO₈₀]*4(SDA⁺F⁻) expressed as unit cell content in its cubic F-centered symmetry, has been studied. Three different kinds of templates, dimethyldiethylammonium, dimethyldiisopropylammonium and isopropyltrimethylammonium cations, were used in the hydrothermal synthesis process in fluoride medium. The products were identified with XRD, MAS NMR, SEM and thermal analysis. The analysis of the X-ray powder diagrams shows that AST crystallizes in different space group symmetries depending on the nature of the SDA and the degree of Ge-substitution. The resonance signals of ¹⁹F in MAS NMR experiments for the pure Si- and Ge-end members are at −38.2 and −15 ppm, respectively, indicating that the F⁻-anion is located as co-template in the double-four-ring (D4R) of the tetrahedral framework. This is confirmed by Rietveld analysis of powder diffraction data of the pure Ge-end member. The peak splitting of the ¹⁹F NMR signal in pure GeO₂AST-type material is related to the displacement of F⁻ location inside the D4R. Two more distinct signals at −8 and −19 ppm, respectively, are observed for X-ray pure AST-samples of intermediate compositions and assigned to fluoride in D4R built of 4[GeO₄]- and 4[SiO₄]-tetrahedra (4Ge, 4Si) and to (2Ge, 6Si)-D4R, respectively. An ordered distribution of Ge in the AST-framework is proposed for cubic AST with compositions around Si/Ge=1.5–1 by correlating the intensities of ¹⁹F NMR signals and the results from chemical analysis. This model is further confirmed by the quantitative analyses of the corresponding ²⁹Si MAS NMR spectra.