乙烯基螺环原酯(VS)和马来酸酐(MA)的交替光共聚

乙烯基螺环原酯(VS)-2-亚甲基-1,4,6-三氧螺[4,4]壬烷和马来酸酐(MA)的光聚合反应,通过形成电荷转移络合物反应中间体,按烯类加聚方式生成线性交替共聚物.在温和条件下,VS和MA的光聚合反应仅在自由基光引发剂存在时才发生,聚合速度取决于溶剂极性和两种单体的投料比.而共聚物的组成与单体投料比无关,保持等摩尔比值.采用UV吸收光谱进一步研究了VS和MA等摩尔CT络合物的形成,并测定了它们在不同极性溶剂中的络合常数(K),另外用IR和¹HNMR波谱进一步测定了VS/MA共聚合产物的结构.得到的结果清楚表明,所得共聚物是一种规整的线性交替共聚物,在VS单元上保留着原有的三氧螺环.另外对VS和MA自由基交替光聚合的反应机制亦作了讨论.     

双亲性无规共聚物自组装胶束结构及其乳化性能

以不同交联度、溶胀程度的双亲无规共聚物聚[(苯乙烯-alt-马来酸酐)-co-(7-对乙烯基苄氧基-4-甲基香豆素-alt-马来酸酐)](PSMVM)胶束作为聚合物胶束乳化剂稳定甲苯/水体系, 重点研究光交联度对胶束结构及其乳化性能的影响. 结果表明, 胶束交联度、溶胀度和荷电性对胶束结构及乳化性能有较大影响.     

光敏感三元共聚物的合成及溶液自组装

以一端为肉桂酸酯光交联基元、中间为聚己内酯长柔性链的甲基丙烯酸酯类大单体FM5C为第三单体,与马来酸酐(MAH)及苯乙烯(St)单体以AIBN引发共聚合,制备了光敏感三元共聚物P(FM5C-co-MAH-co-St).该三元共聚物可在选择性溶剂中形成纳米胶体粒子,并可先利用肉桂酸酯基元的光照交联作用使胶体粒子内聚合物交联,进而利用羧酸酐基元与2-氨基吡啶的室温氨解反应改变胶体粒子形态.用FTIR、GPC、1H-NMR等对该聚合物及其氨解产物进行了结构表征.用动态激光光散射(DLS)、透射电镜(TEM)、芘探针等技术研究了该聚合物胶体粒子微观形态、粒径与微环境在光照交联后及氨解后的变化.实验结果表明,P(FM5C-co-MAH-co-St)在选择性溶剂中可自组装成球形胶体粒子,肉桂酸酯光照交联作用使胶体粒子中的聚合物团聚得更加紧密,从而使其粒径更小、疏水区域更加集中;而进一步的室温氨解反应则使聚合物胶体粒子更松散、粒径变大.     

2-苯基-4-亚甲基-1,3-二氧环戊烷与受电子单体的自动共聚反应

<正> 在极性相反的单体对中,有些无需加自由基引发剂,就能进行所谓自动共聚合反应.带乙烯基的螺环原酸酯、碳酸酯和环缩醛或酮等是给电子单体,可能与接受电子的单体,如马来酸酐(Manh)进行自动共聚反应.至今,这方面研究工作报道甚少。 我们合成的2-苯基-4-亚甲基-1,3-二氧环戊烷(PMDO)能进行自由基开环聚合反应.本文研究它与受电子单体,如Manh、丙烯腈(AN)和甲基丙烯酸甲酯(MMA)的自动共聚反应.     

Fe-Al-α,α′-联吡啶催化体系催化马来酸酐与环氧丙烷开环共聚

马来酸酐与环氧丙烷开环共聚,所得聚酯具有功能团（C＝C）,可以通过接技、交联待方法改变其性能,马来酸杆与环氧化物开环共聚合成聚酯,所用催化剂通用有有机金属化合物和稀土 事物等,我们在铁系催化丁二聚合和马来酸酐与苯乙烯共聚的基础上,首次将Fe(acac)3-Al(i-Bu)3-α,α′－联吡啶催化剂用于马来酸酐与环氧化物开环共聚,发现该催化剂催化共聚反应具有时间短、收率高、共聚物交替度高等优点,并测定了共聚合反应动力学的参数。     

丙烯酸酯共聚物乳液自交联反应的研究

本文研究了含环氧基的丙烯酸酯四元共聚物乳液交联后的溶胀度、自交联反应及动力学.结果表明:交联共聚物的溶胀度Q随甲基丙烯酸环氧丙酯单体含量的增加而降低,共聚物在受热的情况下,环氧基因在羧基的作用下开环而发生交联反应,产生网状结构.     

水溶性大分子汞离子荧光-比色探针RhBH-P（VP-co-GMA）的合成与性能

采用活性基团修饰法,通过罗丹明B酰肼（RhBH）与乙烯基吡咯烷酮-甲基丙烯酸缩水甘油酯共聚物（P（VP-co-GMA））侧链上环氧基团的开环反应,制得一种键合有罗丹明B酰肼的水溶性聚合物RhBH-P（VP-co-GMA）。在水溶液中,该聚合物本身无色且无荧光,加入汞离子后,罗丹明的螺环结构打开,出现显著的荧光增强和颜色...     

聚丙烯—马来酸酐接枝共聚物的固态NMR谱研究

马来酸酐接枝聚丙烯的方法曾有过研究,但主要是熔融法和溶液法,反应温度在160℃以上,得到PP—g—MA共聚物。Russeli等曾对马来酸酐接枝二十烷烃作模型化合物进行过研究,~(13)C—NMR谱的结果表明在正二十烷烃主链上形成的主要为单马来酸环支链,未发现形成长链的马来酸酐均聚物,其原因为反应温度已超过马来酸酐聚合的最高温度(150℃)。     

戊二酸锌催化环氧丙烷与马来酸酐开环共聚反应

以戊二酸锌为催化剂,在无溶剂条件下催化环氧丙烷与马来酸酐的开环共聚反应;优化了聚合条件,利用红外光谱和核磁共振谱研究了共聚物的结构,利用凝胶渗透色谱测定了其分子量.结果表明,戊二酸锌可以有效地催化马来酸酐与环氧丙烷的开环共聚,从而以较高转化率得到交替度较高的共聚物.     

具生物活性的快速光交联生物可降解水凝胶的设计合成

采用开环聚合方法合成了一系列水溶性生物可降解的低聚(丙交酯-co-丙烯酸酯碳酸酯)-b-聚乙二醇-b-低聚(丙交酯-co-丙烯酸酯碳酸酯)(OLAC-PEG-OLAC)三嵌段共聚物,并通过光交联方法方便制备得到具生物活性的新型生物可降解水凝胶.流变测试表明水凝胶储存模量(170～10000 Pa)和凝胶时间(0.8～8min)均可通过调节丙烯酸酯碳酸酯(AC)单元数、聚合物浓度及光引发剂浓度等得到控制.降解实验表明水凝胶的降解速率可通过改变AC和丙交酯(LA)单元数进行调控.含巯基的生物活性分子如RGDC短肽可通过迈克尔加成反应直接链接到OLAC-PEG-OLAC上,由此可方便制备可注射性的具生物活性的生物可降解水凝胶.MG63成骨细胞实验表明RGDC短肽功能化的OLAC-PEG-OLAC水凝胶可很好地促进细胞黏附和生长.该快速光交联生物可降解水凝胶以其优异的凝胶、降解和生物功能化等性能可望为生物组织工程提供理想的三维活性多孔支架.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.